Resume - Seventeen years experience in electrical engineering design, construction superv...

Misco Jobs

Resume #83388

CONTACT INFORMATION:
View contact information...

Principal Electrical Engineer

DOB: January 1970

NATIONALITY: Canadian

EDUCATION

Bachelor of Science in Electric Power and Machines Engineering. Cairo University, 1992.

PROFESSIONAL ASSOCIATIONS MEMBERSHIP

Registered Professional Engineer in the Association of Professional Engineers and Geoscientists of Saskatchewan, Canada

SUMMARY OF EXPERIENCE

Seventeen years experience in electrical engineering design, construction supervision, commissioning & start-up for major international EPC and Consulting firms specialized in power generation, T & D grids, oil and gas petrochemical fields. Participated in large projects in the Middle East, Canada and North America involving design and commissioning of EHV/HV equipment up to and including 400 kV systems, power transformer systems, large generator protection systems, plant & utility electrical distribution systems, medium and low voltage switchgear and MCC systems, relaying and metering system, critical AC and DC systems and emergency generating systems.

COMPUTER SKILLS

* Experienced in using power system analysis software ETAP.
* Offer computer knowledge using Microsoft Access, Word, and Excel.

EXPERIENCE

SAUDI ARAMCO/JACOBS SAUDI ARABIA 2005-PRESENT

Electrical Engineering Specialist

* Assigned as the Electrical Specialist for Saudi Aramco Project Management Team overseeing the Out of Kingdom detailed design activities of the Safaniyah Wet Crude Separation and Water Disposal Upgrade Project (value of the project exceeds US $ 250 Million). This Project electrical scope of work involves the addition of new 230 kV GIS substation and 230/13.8 kV substation complete with protection, control and SCADA RTU systems.
* Review Contractor's electrical engineering activities and provide guidance to execute various electrical activities such as power system studies, equipment specification and selection.

Lead Electrical Engineer Saudi Aramco In Kingdom Project Management Services Program

Responsibilities:

* Technical responsibility for the development of electrical engineering design associated with Project Proposals. Major design activities include extension of 230 kV GIS substations, 230 kV XLPE insulated power cable, HV substation control and monitoring equipment, large adjustable speed drive systems and ETAP power system studies for power generation plants.
* Preparing Expenditure Request Estimate for the electrical portion of the Project.

Projects

* Saudi Aramco Safaniya Water Disposal Project FEED
* Saudi Aramco Shaybah 250 MBCD AXL Crude Expansion and Power Generation Island FEED
* Saudi Aramco Khurais, Phase II, Shy 1 NGL Pipeline Capacity Increase Using Adjustable Speed Motor Driven Pumps FEED
* Saudi Aramco Manifa Arab Heavy Crude Increment Project FEED

JACOBS CANADA INC. Calgary, Alberta 2005

Lead Electrical Engineer Suncor Firebag Power Generation Plant

* Developed the electrical FEED phase for a 400 MW power generation facility and its associated 260 kV switchyard. The power generation island is a part of a CAD$ 2.5 Billion SAGD heavy oil extraction project.
* Carried out transient stability study for the proposed power generation facility after its integration with the Alberta Interconnected Electrical System.
* Prepared the Project Electrical Design Basis Memorandum and developed Functional Specifications for the power generation plant.

ELECTRICITE DE FRANCE, POWER SYSTEM & TRANSMISSION ENGINEERING DEPARTMENT DUBAI, UAE 2004- 2005

Principal Resident Engineer Substations, Emirates National Grid Project

Responsibilities:

* Assigned as PRE S/S to supervise the detailed design engineering phase, construction supervision and commissioning of the following three 400/220 kV GIS substations associated with the Emirates National Grid project:
o DEWA Dubai 400 kV "H" Substation. Main Contractor TM T & D, Japan.
o TRANSCO Abu Dhabi 400 kV Taweelah Substation. Main Contractor Sumitomo, Japan.
o SEWA 220 kV Sharjah Sajja Substation. Main Contractor, VATECH, France.
* Attended 400 kV GIS & associated accessories factory inspections in Japan.
* Develop monthly progress reports for each S/S and report to resident EDF Project Manager.
* Participate and offer engineering solutions during technical review meetings between utilities and S/S Contractors.

FLUOR DANIEL INTERNATIONAL LTD., AL-AHMADI, KUWAIT 2003- 2004
Kuwait Oil Company PMC

Senior Electrical Engineer

Responsibilities:

Front End Engineering Phase

* PMC HV power system specialist. Duties involve developing power system studies for 132/11 kV GIS substations required to feed Kuwait Oil Company (KOC) industrial loads and preparing ETAP model for KOC main 11 kV distribution substations in North & South East Kuwait.
* Liaise between KOC & MEW (Ministry of Electricity & Water) in regard to developing scope of work for 132/11 kV GIS substations assigned to supply KOC facilities.
* Develop project start-up activities such as preparing Electrical Scope of Work for Kuwait Oil Company upstream oil and gas production projects and produce project specific work instructions.
* Develop list of project related electrical deliverables. Prepare start & finish dates for electrical activities and establish key milestones. Utilize logic sequence for activities based on project Level 1 schedule. Update schedule at agreed intervals showing completion status against each deliverable and activity. Adjust manpower levels to suit.
* Estimate project manhours and produce manhour summary based on estimated manhours and proposed schedule. Review actual scope of work against proposal and revise manhour estimate as required.
* Carry out conceptual and frond end engineering design of electrical systems associated with oil drilling projects, oil gathering centers, gas booster stations and pipelines throughout Kuwait for Kuwait Oil Company.

Detailed Engineering Phase (PMC for KOC)

* Participate in Lump Sum Turn Key Contractors project tender evaluation team.
* Supervision of Lump Sum Turn Key Contractors during projects detailed design execution. Duties involve review & approval of design related documents and drawings.

Commissioning/Start-UP Phase

* Prepare list of electrical equipment requiring FAT.
* Approve electrical equipment factory inspection & testing plan.
* Participate in electrical equipment factory witnessing tests on behalf of KOC.
* Develop electrical commissioning scope of work for project commissioning contractor.
* Review & approve test forms for electrical equipment prepared by commissioning contractor.
* Propose technical solutions to problem areas (deficiencies) that are raised by commissioning contractor.

Projects:

The value of the following projects supervised total in excess of US $ 500 Million:

* Installation of Gas Booster Station 131 and Interconnecting Lines with Gathering Centers and BS-130 (LSTK Contractor Snamprogetti, Italy)
* Burgan "B1/B2" 132/11 kV GIS Substation & Effluent Water Disposal Plant in SE Kuwait (LSTK Contractor Dailem, South Korea)
* Replacement of North Kuwait Crude Oil Export System (LSTK Petrofac, Sharjah UAE)

JACOBS CANADA INC., Calgary, Alberta, Canada 1998-2003

Senior Electrical Engineer

Responsibilities:

* Conceptual and preliminary design of simple & combined cycle power generation stations and gas processing facilities.
* Conceptual, preliminary and detailed design of utility HV substations up to 240 kV, HV underground cable distribution systems, SCADA/RTU and communication systems.
* Prepared electrical systems studies including comprehensive short circuit and protection coordination studies, load flow studies, equipment sizing studies, motor starting studies, D.C. systems capacity studies and emergency power system studies.
* Designed power plants protection and metering single line diagrams.
* Developed protection relay logic diagrams for generators, HV substations and associated transmission systems.
* Prepared AC and DC schematic diagrams for protection, control and metering panels.
* Prepared schematic and wiring diagrams for 13.2 kV, 4.0 kV process motors.
* Designed electrical hazardous area classification drawings for gas processing plants. Selected the electrical installation methods in hazardous locations taking into account HAZOP studies recommendations.
* Prepared purchase specifications and data sheets of major electrical equipment such as HV substation equipment, isolated phase bus duct systems, MV switchgear, generator step-up and station service transformers.
* Carried out electrical equipment proposal evaluation and followed up selected suppliers.
* Supervised construction of HV substations, overhead distribution systems, generation systems and electrical distribution systems for power generation and gas processing plants.
* Developed commissioning and start-up activities schedule including progress reports. Participated as a site-commissioning engineer in the commissioning of large generator protection and control systems, distribution substations up to 240kV, all aspects of large industrial electrical distribution systems and emergency generating systems.

Projects:

* ExxonMobil, LaBarge Acid Gas injection (AGI) and Cogeneration Project, Wyoming, USA
* Edmonton Power Development Corporation (EPCOR) 500MW Genesee III Steam Power Generali Plant Project, Genesee, Alberta, Canada
* Transalta Chihuahua 325 MW Combined Cycle Power Plant Project, Samalayuka, Mexico
* TransCanada Energy Company, Bear Creek 85 MW Cogeneration Project, Alberta, Canada
* Aux Sable Liquid Products, Inc., Aux Sable Liquids Extraction Plant, Morris, Illinois, USA
* TransAlta/Air Liquide, Dow Fort Saskatchewan 130 MW Cogeneration Project, Alberta, Canada

ANSALDO ENERGIA Genoa, Italy, 1995-1998

Intermediate Design Engineer

Basic Design Phase Responsibilities:

* Conducted short circuit calculation study for power stations.
* Conducted grounding system calculation study for power stations.
* Designed block logic diagram for steam generator control back-up desk, MV switchgear, 6.6kV blackstart generator and automatic transfer systems.
* Performed basic study for the routing of HV (220 & 66 kV), cables in power block and substation areas, taking into account civil and mechanical interfaces. Issued the first M.T.O. for these cables.
* Structured MV and LV switchboards & MCC's according to the power plant electrical load list.

Branch Office Beirut, Lebanon

Resident Engineer

Detailed Design Phase Responsibilities:

* Headed staff of seven assigned to develop the detailed engineering design phase.
* Prepared progress reports to Home Office and offered technical assistance to resident Project and Branch Managers.
* Prepared MV and LV cables sizing calculation tables.
* Prepared termination diagrams for control, signaling, interlock and measurement cables for MV and LV switchboards, gas and steam turbines generating bays including 220 kV GIS substation protection panels.
* Designed lightning protection layouts for power block, fuel oil and water treatment zones.
* Developed start-up one line diagrams for First and Second Generating Units.

Projects:

* Zahrani and Beddawi Combined Cycle Power Plants (2x450 MW), Republic of Lebanon (Main Contractor: ANSALDO Energia ƒ{ Siemens Power Generation Consortium)
ƒ{ 650 million dollars US turnkey project consisting of two combined cycle power plants each comprised of two Siemens V92.4 165 MW gas turbines and one 150 MW ANSALDO steam turbine, 220 kV GIS substation 66 kV AI Switchgear and 33kV metal clad substation.

ENGINEERING FOR THE PETROLEUM & PROCESS INDUSTRIES "ENPPI" Cairo, Egypt, 1992-1995

Design Engineer

Responsibilities:
* Designed one line diagrams for offshore & onshore gas compression stations.
* Produced hazardous area layouts for gas compression stations.
* Conducted lighting level calculations for process and control areas.
* Conducted emergency generators sizing calculations.
* Supervised field construction and participated in commissioning and start-up activities.

Projects:

* Sumed Pipeline Throughput Achievement
* Gulf Of Abu Qir Phase II Topside Facilities, Mediterranean Sea

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6151 to 6200 of 10898)

Go to Search Parameters...

Brief Description

Documentum Developer

Resume showing details of personal info, academic qualifications, Job experience, professional skills, volunteer experience

I would like apply for any secretrial, receptionist or accounts department position

Drilling Rig equipments maintenance and repair mechanic with 15+ years experience in oil industry. Excellent maintenance ,repair and rebuilding experience of Cummins caterpillar diesel engines , Allison transmissions relate to oil industries.

Sex : Male Place & Date of Birth : Jakarta/9 September 1967 Marital Status : Married with 2 children

Industrial Engineer with strong research,analytical,leadership,communication, interpersonal skills Self motivated,persistent,adaptable,efficient in managing multiple projects simultaneously Proven ability to work efficiently in independent and team environments in diverse work cultures

Project management, maintenance engineering, mechanical design

More than 15 years in oil and gas production experience on DCS and PLc fluent in English my main language is French. Available for any jobs all over the world

ROV Supervisor with 15 years experience.

10+ years of project management experience in the areas of accounting and financial reporting in various industries, including Management Consulting, Retail and Wholesale, Manufacturing and Distribution, Mining and Construction

Provides well site supervision for all aspects of drilling, Work over and completion activities on both drilling and work over rigs.

Dear Sirs, As you can see on my resume, all my experience is on Marine and Oil related Bussines, if any additional information is needed, please do not hesiate contact me.

1992 NTT research, Tokyo, Japan (trainee), 1993 - 1997 PhD exp. Physics, 1997 - 2000 reservoir engineer (RE), oil major's research lab, 2000 - 2002 RE Russian offshore oil development, 2002 - 2005 RE, Al Furat Petr. Co, Syria, later section head and subs. asset man.

I have a total of nearly 13 years experience drafting, with about 9 of those years in the home building business. I also have 5 years in Coil Production (AC, Steam, Condenser, & Air Handlers) I have developed custom designs for previous companies specifically tailored to the customers needs. I have

Operate fractionation plant, lean oil extraction plant, refigeration plant, instumentation work, maintenance work.

Currently I am working as DCS plant operator at Distillation unit, having capacity 27000 BPD.

Preparation of Static Equipment Drawings Using Microstation & Autocad

Inlet gas system,TEG Regeneration and Treating system,Amine Regeneration and Treating unit..

Former GS 15, U.S. Government Contract Officer (KO) & Administrative Contract Officer (ACO)¡Xcurrent Senior Level Professional seeking a Project/Program Management and or Business Development opportunity

Oil Drilling & Production (Quality-Inspection & Maintenance and Auditing)

Seeking a job position in the field of Instrumentation, with challenging opportunities to further enhance and optimize leadership and technical capabilities and to contribute to the success of my employer in my fullest interest and potential

Chemical Engineer with 7 years of experience in Chloralkali Plant and Caustic Concentration Flaking/Prilling Unit

I am currently a final year M.Sc. Student in Electrical Engineering Department, King Fahd University of Petroleum and Minerals (KFUPM). My graduation is expected by May 2003 and I will be available by July 2003.

BSC CHEMISTRY / DIPLOMA IN HSE + 02 YEARS EXPERIENCE

HSE Training,Risk Assessement,Management,Field Safety,Loss Prevention

Aws Cwi Welding Inspector / Ndt Inspector / QA-QC Inspector

Working on following systems:- *FMC smith flow meters, accuload loading pre-set batch contllores, *Rosemount saab tank radar system. *Enraf additive injector system. *MSA gas monitoring system{ suprema ,9010,9020 etc}.

Level 1 OGPO looking for work in northeastern B.C.

Seventeen years experience in electrical engineering design, construction supervision, commissioning & start-up for major international EPC and Consulting firms specialized in power generation, T & D grids, oil and gas petrochemical fields

Expert Contracts and Business Development Manager with more than 20 years of experience with major oil/gas operators in the Middle East and exposure to Contracts Management from start till award and post award, establishing new ventues in drilling, engineering and related fields, & procurement.i

1.2 years of Experience as a Piping Engineer, 2 Year of Experience in PDS Modeling

I am a Controls and Instrumentation engineer from Pakistan. I have 3 year experience

Project Controller with extensive experience of implementation and operation of project management systems. Detailed knowledge of C/SCSC & EVM systems. Experience in Petro-Chem, Oil & Gas downstream distribution, Rail, Defence and Civil Engineering sectors. Extensive procurement experience.

Reservoir Engineer

I graduated from Bandung Institute of Technology (ITB) majoring Chemical Engineering on March 2004 with GPA 2,92. I have experiences as a chemical tanker chartering team and process engineer.

B.Tech (APE) University of Petroleum and Energy Studies, Dehradun (2005-2009) CGPA:-2.98/6 (till 6th sem)

I Am Computer Engineer And I would like to go in Automation field

Summary of Qualifications,Combined experience in Industrial Refrigeration Technician / Electrician Technician in the Pharmaceutical Industry,Petro chemistry, Building Management System (BMS), Ship Systems, Maintenance and Troubleshooting.

Off Shore Work

I am a National Diploma graduate in Emergency Medical Care (N.DIP EMC) from the University of Johannesburg (previously Technikon Witwatersrand).

Analyze, resolve, and log all issues by email, phone, and face-face sessions with the agent. Reviewed recorded calls between the agent and clients to insure quality support. Encourage and motivate the agents to take advantage of training available through Shell. Identify & resolved issues.

Fresh electronics and instrumentation engineering graduate with good academic records.

25+ yrs progressive exp. as a Sr. Supervisory Planning/Scheduling & Project Control Engr/Mngr with Risk/Contracts Exp, Int'l w/Utilities, EPC Firms/Consultants, Turnkey OEMs and Constructors within the Energy Sector. P3 Ver.3.1, Primavera P3e/cVer.5, 6.2,Pertmaster, Claim Digger, MS Office, Acrobat

Fifty Years Total Experience in process engineering and technology development. Including More Than Twenty Years Process Engineering Experience on petroleum refinery, oil & gas production and petrochemical projects. Experience includes process simulation software Hysys/Pro II/Dynsim/Aspen.

Petroleum Geologist with 20 years international experience

The majority of my 15 years of experience has been applied to inspecting in-service pressure equipment and piping in a refinery setting. I am an excellent communicator with exceptional organizational skills geared toward inspection, NDE planning and crew leadership.

stat engineer (oil and gas exploration) , drilling rig move fishing

MSc GEOLOGY, RESEARCH WORK IN ELECTRICAL RESISTIVITY METHOD IN GEOPHYSICS FIELD

B.E.(Chemical), 6 years of experience in offhsore oil and gas platform of which 3 years in control room.

Over 9 years experience in Instrumentation & control in Chemical, Power, Cement, Sugar & Petrochemical industry

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 [ 124 ] 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out