Resume - cfd, thermal, aircraft, turbomachinery

Misco Jobs

Resume #83410

CONTACT INFORMATION:
View contact information...

Technical Skill:
CFD, Aerodynamic, Heat Transfer Design and Analysis on Business Jet, Anti-Icing System and Turbomachinery. Good in C, C++, Fortran90 OpenGL and. Linux system.
Experience

Emivestaerospace Inc. San Antonio, TX, 1996-2009
Senior Engineer

Performed CFD analysis on business jet using overflow, usm3d, Euler code. Heat Transfer analysis on Anti-icing system using Lewice and internal codes.

Performed wind tunnel testing and validation on CFD results..
Developed CFD and thermal capabilities in Emivestaerospace, using OVERFLOW, OVERGRID, Gridtool, Pegasus, Fun3d, Pab3d,Usm3d, PATRAN, Pmarc, Gridgen, Mercury, Tecplot, Plot3d, OpenGL, GUI on window, SGI and Linux computer system
Performed low speed wind tunnel test on SJ30-2 to get takeoff, landing performance.
Optimized gap and overlap for slat and flap for takeoff and landing performance.
Performed high speed wind tunnel test on SJ30-2 to get cruise performance.
Designed SJ30-2 nacelle inlet system, pylon and integrated with fuselage to minimize drag.
Performed vortex generator simulation on wing to reduce shock induced separation
Performed optimization design using CDISC.
Investigated various turbulent models on maximum lift prediction.
Performed engine deck calculation to evaluate its effects on anti-icing system.

Developed critical load for stress evaluation on SJ30-2 flight envelop.
Developed 1g wing geometry by iterated aerodynamic and stress codes.
Performed RVSM (reduced vertical separation minimum) cfd analysis.
Finalized pitot static probe locations by cfd.
Performed icing wind tunnel test on icing shape generation.
Predicted Ice Shape on Radome, wing, unprotected areas.
Design anti-icing system and certify icing system for SJ30-2 business jet.
Performed thermal analysis for anti-icing system on wing and inlet.
Coordinated with aircraft performance group, engine performance group, stress group,weight group, system group, design group, manufacture group and flight test group to optimize aircraft design.

Performed preliminary supersonic business jet design and analysis on wing, inlet system.

Accomplishment:
1.Developed CFD capabilities in emivestaersoapce and performed aerodynamics design, analyze and optimize SJ30-2 geometry to save company millions dollars. Million dollar already spent on outside consultant work which can be done inhouse now.
2. Developed a best and fast business jet by minimized the drag and maximum the lift by aerodynamic design and analysis by cfd.
3. Developed vortex generators on transonic supercritical wing to reduce shock-induced flow separation. It will eliminate the future chance of aircraft crash during flight test.
4. Certified Anti-icing system in-house which save half millions dollars if done by the outside consultants.

Dee Howard Company, San Antonio, TX, 1988-1996
Senior Engineer
Performed CFD analysis and design in Boeing 727 reengine program, S-Duct and Thrust Reverser.
Accomplishment:
Developed a patented S-duct for Boeing 727-100 QF for 50 UPS fleet. The successful program made Dee Howard over $500 millions.
Developed the patented thrust reversers which won almost all the contracts from the business jet industries.

Honeywell (Garret), Torrance, CA. 1984-1988
Senior Engineer
Performed CFD analysis and turbocharger design, analysis, testing, performance and improvement.
Developed turbocharger used for transportation industries. Now Honeywell is the world best turbocharger manufactures.

Taiwan University, Taipei, Taiwan, 1978-1984
Professor in Department of Mechanical Engineering

Pratt Whitney Rocketdyne, Canoga Park. CA 1976-1978
Member of Technical Staff
Performed CFD and analysis on Space Shuttle Main Engine Pump and inducer.
Advanced numerical capabilities in Rocketdyne.

Rolls Royce, Allison Division, Indianapolis, IN 1973-1976
Senior Project Engineer
Performed CFD and Heat Transfer analysis on turbine blade.
Developed CFD and Heat Transfer Finite element codes.

Education:

Ph.D Mechanical & Aerospace Engineering, Univ. of Rochester, Rochester. NY, 1973
MS.Mechanical & Aerospace Engineering, Univ.of Rochester, Rochester. NY, 1971
BS Mechanical Engineering, Taiwan University, 1969

2 Patents and 13 publications can be seen in Google Search.

Patent

1. Pao Huang " Center Engine Inlet S-Duct Geometry for Reengined Boeing 727-100 Airplane" 1992 in USA, Europe
2. Ray Furst, Pao Huang " Rotating Diffuser for Coal Slurry Pumps" 1978
US and Foreign Countries

Publication

1. Slater A. Huang P., Paschal W. and Bewick Clare "Comparison of Experimental
Ground Testing and Computation Fluid Dynamics for the Re-Engined 727-100
Center Engine Inlet, AIAA paper 92-3920
2. Anderson B. Huang P. Paschal W and Cavatorta E " A Study on Vortex Flow Control of Inlet Distortion in the Re-Engined 727-100 Center Inlet Duct Using
Computational Fluid Dynamics", AIAA paper 92-0152
3. Huang P., Piccolo A., Paschal, W and Anderson B. " Design and Analysis of
Re-Engined Boeing 727-100 Center Inlet S-Duct by a Reduced Navier-Stokes code" AIAA paper 92-1221
4. Huang P, Piccolo A., Slater A. " Design and Analysis of Vortex Generators for
Boeing -100QF Center Inlet S-Duct by a Reduced Navier-Stokes Code'
AIAA paper 92-2700
5. Huang P. " Boundary Element Method in Microcomputers"
MSC-73-0410-E002-014 July 1984
6. Huang P. " Computer Aided Design of Centrifugal Pumps" Symposium on Transport Phenomena and Application, Taiwan University, June 1984
7. Huang P. "Computer Aided Design of Impeller of Axial Flow Tubo-Blower"
International Conference on Advanced Automation, Institute of Information
Science Dec. 1983
8. Huang P. " Dynamic Characteristics of Squeeze Film Damper Bearing"
Bulletin of the College of Engineering, Taiwan University, No XXXIV, Dec.
1983
9. Huang P " Steam Hammer Loads in Nuclear Power Plant Piping" Symposium on Transport Phenomena and Application, Taiwan University, June 1982
10. Huang P " Computer Analysis of the Flow Field in Turbo machinery"
National Science Council, Vol. X, No2. Feb. 1982
11. Huang P " Dynamic Characteristics of Taper Seals" Journal of the Chinese Institute of Engineering, Vol. 3, No. 1 Jan 1980
12. Huang P " Finite Element Methods for Three Dimensional Duct Flow"
Symposium if Computer Application in Engineering, University of Southern
California, Aug. 1977
13. Lessen M and Huang P " Poiseuille Flow in a Pipe with Axially Symmetry Wavy Walls " Physics of Fluids, Vol. 19. No 7, July 1976

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 10833)

Go to Search Parameters...

Brief Description

Free! Pipeline Construction and Installation

Free! I am working as Toolpusher since 1999 then as SNR Toolpusher.I have experience in Land rigs,different types,Land skidding rigs type,Good HSE Attitude, To manage the personnel of different nationality.

Free! Looking for and Field Operating Position, Can also Well Service

Free! I have been a well site supervisor for the past 7 years for top companies in Canada / Duvernay Oil Corp / Shell International ( canada ). I have been working hard for the past 19 years to excel in the completion / workover / production, sector of the oil and gas industry.

Free! Geophysicist

Free! Dynamic business development and operations executive with 25+ years of experience and a history of delivering multimillion dollar P&L improvements by identifying and capitalizing on opportunities to win new business, reduce costs, and enhance processes / productivity. Strategic thinker.

Free! I am reliable, highly motivated leader, with over 17yrs experience in the drilling industry

Free! Knowledge and specialty in Versaclean Synthetic Oil Based Systems, Novaplus systems, Lignite/Lignosulfonate, KCL Polymer, Rheliant and Flo-Pro systems. Experience in exploration wells, directional, deviated, lateral as well as development wells. Experience with blowouts,and well control,

Free! Completion Supervisor for vertical and horizontal wells with 14 years experience

Free! Experienced Geologist with all types of Petroleum Geology experience including conventional, tight sand, shale & CBM.

Free! Geologist (Ph. D.), 10 years industry experience in exploration, mining and JORC-like reserve/resource estimation projects in Europe, Middle East and East Africa is interested to support and strengthen a new international team. Surpac experienced, hands on approach, bulk commodity experience.

Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.

Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification

Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.

I am having 24 years rich experience in Water Treatment that includes pretreatment, water filtration, demineralization plant, water softening plant, micro-filtration, nano-filtration, reverse osmosis and power plant water treatment that include O&M of condensate polishing units.

Experienced Ph.D Reservoir Compositional Simulation Engineer

CHIEF EXECUTIVE OFFICER / CHIEF OPERATING OFFICER / CHIEF FINANCIAL OFFICER

Project leadership, project development, engineering, installation, field startup and operations. Project engineering, instrumentation and controls, distributed control systems (DCS), safety systems (SIS),programmable controllers (PLC) Human machine interfaces (HMI). System interfaces. DCS,PLC

27-year career with Chevron, I was employed both as organic geochemist and petrophysicist. Experienced in openhole log analysis, integrating log and core data. Worked with all three major logging contractors. Experienced in LWD and wireline logs. Familiar with workstation and geolog.

I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experience (hands-on, supervision and Lab work) in drilling and drilling fluids engineering for over twenty three years. I believe in undertaking challenging for improving innovative enhancement in drilling and completion fluids.

30 plus years of international petroleum exploration in prospect generation/evaulation and in basin analysis using sieismic, geological and sequence stratigraphic tools.

C Level Oil & Gas Exploration and Production Leader

cfd, thermal, aircraft, turbomachinery

I have experience in oil & gas industry for more than 22 years, 5 years in power equipment fabrication and manufacturing and 2 years in mining industry. Area of my expertise are QA/QC, Welding and NDT, Construction and Fabrication and Project Management. Familiar with International Code & Standard .

E&P Geophysicist & Integrated Geoscientist (at Advisor/Senior Staff or Practice Manager level) immediately contributing Prospect Generation, Reservoir Seismo-Geology/ Seismo-Petrophysics, 3D Reservoir Modeling & Seismic/Sequence Stratigraphy enhanced with IT Applications; Strategy Mgmt, Risk Mgmt.

A mechanical engineer with 35 years experience in the design, troubleshooting, installation, operation, and control of rotating equipment including compressors, gas turbines, steam turbines and pumps. Primary experience has been in improving the performance of gas compressors and related systems for

A senior engineering position in areas such as Mechanical Engineering, Petroleum Engineering, Artificial Lift, Multiphase boosting & Separation, Petroleum Production Technology, Petroleum Facilities Development, Planning & Design, Pipelines Inspection & Engineering, Inspection Engineering or Corrosi

I am 56 years old Turkish citizen and looking for a serious and full time job abroad. I am an AIChE member and have PhD. , M.S. degrees related with heat transfer in chemical engineering and I also have more than 30 years of experienc

30 years international executive leadership of HSEQ, integrated risk and life-cycle management gained in engineering, fabrication, construction, commissioning, operation, maintenance and decommissioning projects.

23-year profession experiences in oil and gas upstream activities with Texas Geophysicist Licenses

Qualifications: CPL/JD Skills: Due Diligence, Title Runsheets, Lease Take Off's, Ownership Rpts. and Lease Acquisitions.

Structural and stratigraphic interpretation of 2D and 3D seismic data

As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.

Landman, Lawyer, Title Abstractoe, Business manager

front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic

23 years experience including IT management, systems architecture and design, analysis, modelling and development, training as well as IS/IT strategies and frameworks for management information systems.

Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.

MS Geology; structural geology, prospect generation, basin analysis, petroleum systems, clastics, log analysis, field studies, Petrel, training, managment, recruiting

I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.

Good team player and a strong believer in teamwork and performance; Good verbal & written communication skills and a continuous improvement focus; Good facilitation skills, networking with industry professionals and performing presentations at workshops and seminars; Good leadership and mentorin

20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms

Would you please see my CV and references attached?

an accomplished project manager, Chartered Engineer, with BSc, MSc, in mechanical engineering, holder of IMechE's Diploma in Engineering Management - (Project Management), extensive experience in design engineering, plant engineering, cost and scheduling, procurement, contract administration

21 yars in Oil and Gas Industry

Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller

Adaptable, Versatile and highly experienced, Possessing excellent communication skilled at all levels, the propensity to empathize and get on well with people at all levels.Disciplined,Selfmotivated with the ability to motivate others, able to assimilate and retain information quickly, taking a po

I had a master degree in structural engineering from the University of Southern California.

Professional Maintenance and Integrity Manager

Quality Control Manager

30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.

First [ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out