Resume - Precom & Com Specialist - System Completion

Misco Jobs

Resume #83439

CONTACT INFORMATION:
View contact information...

2007 to 2009
Completion manager - Commissioning & Start-Up
TECHNIP contract - YLNG project - YEMEN

$2 billion LNG Complex located in Bal-Haf, including two liquefaction trains with a total capacity of 6.7 million tons of LNG per year and a permanent company camp, 30 buildings and their facilities (Restaurant,Clinic,Sport Center, Maintenance...)

Construction, Commissioning and Start-Up completion manager of the project.
Handover systems identifications, including trains, permanent & temporary camps.
Handover procedure elaborations.
Completion/Handover monitoring (Opercom methodology / ICAPS software).
Document certification compilation.

Project performance monitoring by means of summary reports and project reporting.
Assistance/Report to the commissioning manager.
Acting deputy manager during commissioning managers leaves.

Multidisciplinary support function for construction & commissioning engineers
Sub-Contractors/Contractor/Company interface.

2006 to 2007:
Instrument and control systems engineer - Engineering
TECHNIP contract - Dung Quat refinery project – VIET-NAM

$2.5 billion crude oil refinery, for the treatment of 130,000 barrels/day to produces fuels and petro-chemical products

F&G cause and effect design.
HMI displays design.
System Intools database review.

DCS, ESSDS and F&G factory acceptance test (Honeywell Singapore).
Packages IFAT.

2004 to 2006:
Instrument and control systems supervisor - Hook-Up & Commissioning
TECHNIP contract - East Area gas compression platform Project – NIGERIA

Oil Recovery offshore production facility, including a 18,000-ton gas compression platform, supported by 7,200-ton jacket and piles, a living quarters platform, a flare platform and bridges.

DCS and ESSDS Factory Acceptance Test (Rosemount Calgary).
Packages IFAT.
Instrument commissioning procedure elaboration.
DeltaV Fisher Rosemount and Triplex onshore/offshore commissioning.
F&G System and Programmable Logic Controllers (PLC).
Commissioning database review (WinPCS).

2003 to 2004:
Instrument & electrical supervisor - Maintenance
SAIPEM contract - TOTAL offshore platform (OFON field, OML102) - NIGERIA

Instrumental & electrical preventive and curative operations.
Yokogawa DCS basic operations, software and hardware.
Black start operation.

2001 to 2003:
Instrument supervisor - Maintenance
CEGELEC contract - TOTAL deep-offshore FPSO (GIRASSOL) - ANGOLA

Preventive and curative actions on the following equipment:
Inert Gas Generation.
Turbo-generators (Nuovo Pignone).
Gas and Air compressors.
Safety system - Fire & Gas detection.
Training of local workers.
Free fall boat team leader (Mustek certified).

2000 to 2001:
Technical engineer - Project
CEGELEC contract - Bangkok Metropolitan project - FRANCE

FAT report elaboration.

2000:
Electrical engineer - Commissioning
CEGELEC contract - Istanbul Metropolitan project - TURKEY

Punch list Clearance.

2000:
Instrument engineer - Revamping
CEGELEC contract - SNPE - FRANCE

2000:
Instrument engineer - Technical Support
CEGELEC contract - European Space Centre, Arianespace - FRENCH GUYANA

Spare parts management.
Warehouse material review

1999:
Instrument engineer - Commissioning
CEGELEC contract - European Space Centre, Arianespace - FRENCH GUYANA

Commissioning of space launcher utilities (Ariane 5 table).
Operation during launch (launching zone, gas storages).

1999:
Instrument engineer - Commissioning
CEGELEC contract - Rhones Poulenc - FRANCE

steam power turbine commissioning

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6901 to 6950 of 10816)

Go to Search Parameters...

Brief Description

Completion foreman

certified QC inspector with 4 plus years of experience, handling all stage inspections of piping, vessals,structruals. welding inspection , familiar with international codes and standards

I am a degree holder in Mechanical engineering. Also having sound knowledge in PDS, Microstation. Presently working as a Lead Engineering Manager in Plant Layout and Piping Discipline.

Project Planning Engineer

Mechanical Engineer with experience in Contracts Administration; General Services Coordination; Procurement - Warehouse; QA Coordination, in Oil Industry.

Computer knowledge ( Word,Excel & Powerpoint) , Safety & Health Occupational Course , Dilpoma in Secretary Sciene

After completing 3 years diploma in mechanical I am presently serving China National Logging Corporation (CNLC)

Develop technical specification, guidelines, procedures, etc. that are practical to be applied as Company's standards in order to control the expected quality, performance and efficiencies. Resolve technical and quality issues pertaining equipment performance & problem.

Manager of Projects; Operations manager for OSV,DSV AHTS etc. Construction manager;Workshop manager

Chemical Process Design Engineer, work experience in various projects of Oil & Gas Plants / Transferring Pipeline Simulation & Design, Specialist in design of Amine Sweetening plants, Working familiarity with following software: HYSYS, PRO II, PIPEPHASE, HTFS TASC, OLGA, MS Office Excel & Macro

I am holder of a Bsc. in Marine Mech. Eng; Major: Offshore Engineering. My back ground in oil field construction activities (Onshore /Offshore), and and extensive experience in wellhead engineering, maintenance, repairs and testing.

MSc. Civil Engineer, major: Land Surveying; 19 years experience of cadastral (legal) and public utilities and road surveying and topographical mapping

Working as bars manager I have got good skills to work with team of people supervison make sure all standarts are achieved. Duty manager shift responsible for whole hotel.

Position as an Able Body Seaman for a company that seeks an experienced, skilled Merchant Mariner.

Geology / Reservoir Engineering Tech

Field Machinist/Millwright

NDT Inspector-oilfield equipment

Scaffolding coordinator-supervisor and Safety manager

35 YEARS ELECTRICAL ENGINEER/HV/PLC

Inspection of Welding/Painting/Piping/Pipeline Activities

Geophysicist, QHSE Advisor, Auditor ISO 2000:9000, MCSE, MCDBA

Bachelor of Engineering with over 27 years experience in Process Automation & Control industry.

Mechanical Design Engineer

Well cementing specialist with an experience of three years in the field of well cementing. Great knowlege in location safety and

On job training as instrument technician,computer software and hardware technician, attended to SIRIM Berhad to make testing.

Expertise in Contracts & Materials Management field of Vendor Development, Materials Procurement, Expediting etc.

OSHA certified EHS Engineer with 3.5yrs experience

Knowledge in Electronic Document Management Systems and excellent computer skills

Intact stability, Weight engineering, hydrodynamics, warranty surveys, pipeline design and installation

Precom & Com Specialist - System Completion - Instrument & System

Professional Engineer with extensive international experience in chemical/environmental engineering and Construction Management. Very proficient in Project Mangement tools. Doctorate degree in Chemeical Engineering and pursuing PMP certification.

- Bachelor of Science - Chemical Engineering; Green Belt - Lean / Six Sigma; Project Management; Microsoft (Word, Excel, PowerPoint, Access and Project); AutoCAD

Seven (7) years of experience in project planning & operation/execution management;; Acquire crucial information needed to develop a Baseline Programme; Develop the Baseline Programme using Primavera software; Update the programme and generate progress to graphical chart illustrations;

A technically qualified mechanical engineering professional, who has built a sound career in post-contract administration, procurement, and expedition.

Network Administrator Looking for a challenging job in the field of Project Management, Network Installations and Internetworking, which provide me with a completive and healthy environment and enables me to build up an excellent career.

Human Resources or Administration Assistant with a long experience with international companies

Mechanical Engineer with more than fifteen (15) years of combined experience in engineering in various industries, which includes plant operations in various industries, which includes offshore and onshore oil & gas design, petrochemical, chemical manufacture, gas processing, and other industries.

More than six years working experience in Auto CAD/Auto LISP. Presently working in Doha, Qatar as an Instrumentation Designer.

Highly experienced and motivated Electrical Technician with over 16 years in the Oil and Gas industry having Electrical Installation, Commissioning and Testing experience, of which several years were spent in the Drilling and Exploration as Chief Electrician, on a Mobile Jack Up Unit.

* Piping Engineer with 7 years of rich & solid experience in Pipe Stress Analysis & Support Design of Petrochemical/Refinery/Power/Chemical/Man-made Fiber processing plants. * Exclusive Field experience.

I’m looking for a new job position that avails my experience, my skills & knowledge, and permits me to perform new ideas in the company profit. I have been working in the oil industry for five years. I have experience in production operations and computer applications.

I have worked as HSE Consultant with multinational Oil companies on Seismic survey and at rigs. I have earned M.Sc. and M.Phil degree in geophysics with research on environment in M.Phil.

OBJECTIVE: To pursue challenging career in a dynamic and career oriented organization

A highly motivated young professional with extensive academic background and more than 6 years of experience in two of the largest Bulgarian Energy Companies.

Reservoir Engineer with 6+ years of experience in reservoir simulation, pressure transient analysis, classical reservoir engineering etc. Experience in various reservoir engineering software like Eclipse, OFM, MBAL, Petroleum Work Bench etc.

Sr. QA Inspector

I have a large experience in erosion control works for pipelines

Please Contact ASAP

I have 7 years experience both in Kuwait and in Egypt include Familiarity with electrical control systems & electronics devices Planning & controlling of medium and large size projects

Entry level engineer looking for a career with a well established company. Willing to relocate.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 [ 139 ] 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out