Resume - Job Application for Drilling Engineer (onshore/offshore)

Misco Jobs

Resume #83593

CONTACT INFORMATION:
View contact information...

EDUCATION
(1) Bachelor of Engineering (Materials Engineering) with Merit
Nanyang Technological University, Singapore [2002-2007]
(2) GCE A'levels
Tampines Junior College, Singapore [2000-2001]
(3) GCE O'levels
Loyang Secondary School, Singapore [1996-1999]

EXPERIENCE
Stuart Wright Pte Ltd, Singapore [Jan 2007 -May 2009]
Junior consultant well design engineer who participated in various projects listed below:

(1) Well Design for Oil Search Limited
Coordinated a 6 wells well- design project to produce an ideal rig specifications to meet the design loads
- Analysed offset wells NPT & Operational Efficiency
- Performed uni- axial and tri- axial checks on the 13-3/8" and 9-5/8" casing
- Simulated hydraulics/T&D modelling to produce maximum surface circulating pressures, hookloads and ECD

(2) Offset Wells Performance Review for BP Azerbaijan
Carried out a performance analysis for 10 offset wells for a field in Azerbaijan
- Analysed offset wells NPT & Operational Efficiency
- Conducted case studies of classic non-productive incidents

(3) HWDP Failure Analysis for Premium Drilling
Determined the cause of a parted HWDP during drilling operations
- Coordinated the failure investigation with NTU Mechanical Engineering School
- Analysed important operational data that lead to the HWDP failure

(4) Well Assurance Review for Premium Drilling
Performed a well assurance check on a well Premium Drilling was drilling, for Repsol Libya
- Verified the casing seat depths, kick tolerances, uni-axial and tri- axial checks for the 13-3/8" and 9-5/8" casing

(5) Engineer with John Wright Company
Assisted John Wright with process mapping for their in- house well control services
- Mapped Level 1, 2 & 3 Well Control Response, Relief Well Drilling and Capping Offshore/Onshore well processes
- Put together a well control audit report for a major oil company

(6) Drilling Engineer (Onshore/ Offshore) with Cairn Energy
Assisted the drilling team with 2 high pressured, exploration wells offshore in the Bay of Bengal.
- Prepared and organized DWOP session
- Implemented performance tracking and management systems
- Wrote final well reports & presentation slides, abandonment programme and incorporated lessons learnt
- Captured daily drilling cost
- Planned and coordinated personnel movements
- Performed HSE incident investigations
- Produced casing tallies, BHA sheets, cement calculations and LOT calculations.
- Prepared inventory movements for forward operations

(7) Offshore training attachment with Premium Drilling
Three 1-month training hitches on 2 high- pressured and high temperature, exploration wells offshore Brunei.
- Assisted the Rig Manager in the performance tracking during drilling operations
- Re-design various parts of the rig on AutoCAD to increase the level of safety on the rig
- Worked in various practical roles such as roustabout, pump man, shaker man and roughneck
- Re- produced a "Drops Inspection Programme" that was eventually used across all similar class rigs

Technology Intern [ Jan- Jul 2005]
Advanced Materials Technologies, Singapore
- Assisted R &D engineers to carry out their research on Power Injection Molding
- Supervised the secondary operations, particularly in QA/QC checks
- Participated in discussions for new product developments
- Conducted NDT on samples to improve product yield

PROFESSIONAL COURSES
- Customer- Based OBM Course
- Certified IWCF Well Control for Supervisors (Surface & Subsea)
- @Risk Software
- BowTie Risk Analysis Software
- Certified IADC Well Control for Drillers
- Enterprise Process Center (EPC)
- Tropical Basic Offshore Safety Induction And Emergency Training
- Various Stuart Wright Pte Ltd in-house Well Engineer training programme

AWARDS AND RECOGNITIONS
- Chairperson for NTU Outdoor Adventure Club Freshmen Orientation Camp
- Won numerous awards in Track & Field events, Road Runs and Hockey
- Elected as Secretary of TPJC's faculty committee
- Awarded an Edusave Scholarship
- Appointed Drum Major of Loyang Symphonic Band

PERSONAL DATA
- Microsoft Office, Pro-E, AutoCAD, VBA, ANSYS, StressCheck, WellPlan, BowTieXP, @Risk and EPC
- Single, female, 26 years old, Singapore Citizen
- Fluent in English and Chinese
- Hobbies: Rock- climbing, tennis, reading, trekking and jogging
- Acquired a Class 3 Driving License in June 2003
- Date of Availability: Immediate

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8101 to 8150 of 10923)

Go to Search Parameters...

Brief Description

Senior Manager looking for a new challenge with expectations of executive advancement upon successful proof of capabilities

Electrical engineer with experience in oil field electrical construction works. Possess IRCA cerification for Quality Management System and MS project and autocad 2000 certification

Twenty plus years of experience in electrical construction, maintenance. International experience in Middle East and South America. Willing to discuss any and all opportunities available.

Chemical Engineer with experience in production with a reputed Petrochemical industry as Engineer (Production). Responsible for operation and maintenance of Production section which includes a Hydrogen plant using Catalytic steam reforming process and an Auto-oxidation plant for peroxide.

Commissioning, Testing and Maintenance of Generators, static excitation system , Protective Relays, 220kv Switchyard, Power Transformers, 6.6kv Switch Gear 415v Switchgear, 415VMCC

A B.Eng. degree, 2nd class honours (upper division) in Civil Engineering. He has worked with several copamies since his graduation and has acquired experience in his field of study. He is a good team player, honest, hard working and timely.

I'v the pleasure to present my c.v to all your respected well known organizations

An Oil And Gas Professional with an experience in handling technical and experience to coordinate with all related and responsible departments relating and involving to plants¡¦ operation and performance , to provide technical , service and commercial support to customers and end ¡V user¡¦s

Fully certified including First Aid and ready to begin Oil & Gas Career as a Labourer. Ready to commence work immediately.

Ten years working experience in the oil and gas industry, dispensing the role of QA / QC Inspector for Piping, Pipelines, Pressure Vessels, Steel Structures and Welding from fabrication and installation to pre-commissioning of oil production facilities, oil refineries, natural gas plants etc.

I&C Technician with geothermal experience

Petroleum Engineer with 3 years of experience in the Oil Industry, Production Supervisor (1 y), 230 wells SRP, PCP, ESP. Logging Engineer (2 y). Responsible, team player, work under pressure, team leader, analytic. Computational skills.Ready to be relocated. Toefl IBT 100/120

QC Engineer/Inspector (Piping/Welding) with CSWIP 3.1

A well organized, dedicated professional, developing, presenting, and implementing value added recommendations for the improvement to the companies overall goals and employee¡¦s performance.

Job Application for Drilling Engineer (onshore/offshore)

I am retired from the Royal Canadian Mounted Police (R.C.M.P.), having left in July 2006 with almost 25 years of service. Since then, I have obtained my P.I. licence and conducted investigations for different firms

M Tech with 10 years exp in Instrumentation& Control field of Fertilisers, Utilities and Power

Welder

21 Years Experience in EPC/LSTK Project estimation, proposal, marketing, planning, project procurement and project management for Refinery, Petrochemicals and Fertilizer Plants like Ammonia, naphtha Cracker, PTA, Hydrocracker, DHDT, Sulphur and other units. Presently working with L&T, india.

Software analyst, Engineer (Piping Design)

I have beenb graduated from electrical and electronic enginnering and then joining Schlumberger as cementing field engineer for three years promoted three times

I have been in the electrical utility business for over 20 years,and have experience with gas and steam turbines.Frame 7FA/Frame 5 L/M.I am looking to relocate to a position in Northen Wisconsin/Northern Minnesota.

Chemical engineer, skilled in water treatment

Analytical, Satisfied by customer servicing and their satisfaction, team member.

Good experience in the field of computer works by using operating, installation and

Postgraduate in Ocean Engineering looking for postion in offshore and coastal engineering organisation

Mechanical Superintendent.

Respected sir/madam . I¡¦m a Diploma in Petro chemical technology and I¡¦m looking forward to work in a stimulating and challenging environment that will convert my skills into performance and recognition for my hard work , honesty and sincerity

Young MBA & CPA with Big 4 audit experience & multinational internship exposure, a multidisciplinary background & diverse profile, and a great fluency in English, Chinese and Malay.

I recently completed the degree of MA in Management from Webster University London, been engaged in jobs, where I had opportunity to interact with people from diverse groups. Passionate to develop my career in business management.

B.eng. + MBA with 2.5 years exp. in construct. + 4 in mgt and finan. consult with inter. firms in Europe and Canada. French, English, funct. Spanish. Look. for internat. and challeng. position (off / onshore)in project or contract mgt or in a corporate position. Open to other interesting positions.

Seeking a position of responsibilities, Dynamic Challenges and opportunities for Professional Advancement in rapidly growing Competition in the field of Chemical Engineer.

I'm seeking a long term employment with a company that can offer advancement and a challenging career

B.sc Mechanical engineer having 3 years experience in multinational petrochemical company as a process engineer since 01 sept 2000 till date

Objective: To find a position to utilize and challenge the skills, which I have acquired, with the opportunity for advancement.

6 years experience as a CAD Drafter/Designer in Electrical & Civil Engineering, specializing in AutoCAD and Microstation. Also have a second Associates Degree in Computer Information Management Systems.

I have completed my degree in BEng Hons in Mechanical Engineering and working in Dadabhoy Cement industries Limited. I am looking for jobs in Oil & Gas sector

C.V.

I am a well-qualified and experienced accountant as I worked on most of computer accounting program as well as manual. And I am in lookout of suitable placement in Egypt as per my job handling (in brief) shown

Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.

INSTRUMENTATION ENGINEER, having completed B.E in Instrumentation and Electronics, and Diploma in Instrumentation Technology, with overall experience of 3years, looking for a challenging and rewarding career.

Planner / Scheduler: 2 Years Experience, Site Engineering: 1 Year Experience Developing Schedules, Resource Allocations, Planning Spreadsheets, Deployment Schedules, Charts, Progress Reports. Review of Contractor’s Programmes, Specifications, Contracts. Tracking Correspondences, Archives

I am Mechanical Engineer with first class career record. I have more than 5 years working experience in large power plant operation and maintenance. I have Boiler proficiency certificate issued by state government of India.

12.02-03.03 Pertra 06.02-11.02 SkyBrush 06.01–05.02 RWE-DEA 02.01–05.01 Norsk Hydro 12.99–09.00 Privat work 02.00–08.00 DONG 02.97–11.99 Saga Petroleum 03.95–01.97 Schlumberger norway 02.89–02.95 Schlumberger worldwide

Business Process Reengineering of a Manufacturing Company Using tools such as Supply Chain Management, Lean manufacturing & Computer Simulation Modelling

Currently employed through Nabors Drilling as Motorhand. Previous experience as Derrick hand, rough neck, and lease hand. H2S ticket through Pitts, Nisku Alberta. Presently studying for my first line ticket.

Project Management and Mining Engineering Professional with 19 years experience

M.E from IISc bangalore and B.Tech from NIT trichy with 1 yr 2 months exp in steel plant and 6 months exp in management consultancy firm

BACHELOR OF ENGINEERING in ELECTRICAL AND ELECTRONICS ENGINEERING, EXPERIENCED IN SUBSTATION AUTOMATION AND OPERATION SYSTEM

I have 35 years experience in the security field.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 [ 163 ] 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out