Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #84019 next resume »»
CONTACT INFORMATION:
View contact information...

CAREER HISTORY:

Oct 08 - present: PETRO-CANADA COMPANIES IN LIBYA – Tripoli, Libya
Senior Completions/Workovers Engineer
* Contract 28/28 rotational position posted in Tripoli office.
* Design Completions/Workovers, Frac/Acid stimulations, CT completions/ cleanouts, and all cased hole activity (Rig and non-Rig ops) on wells to 14,000ft
* Team with Well Site Supervisors/Engineers to achieve Petro Canada's TLM (Total Loss Management) and Zero Harm policies, goals, and objectives
* Communicate, support, and advise operations team on a daily basis to ensure smooth, cost effective, and safe operations are maintained
* Commercial and technical evaluations and bid tender selection.
* Well review and workover candidate selection.
* TCP, CHDST, CT acid wash/stim, ESP, SRP installation, zonal isolation, multi zone completions and P&A finalization
* Provide ongoing engineering/operational support during on-site execution of well completion/workover programs

Nov 06 – Sept 08: FALCON OIL AND GAS EXPLORATION – Budapest, Hungary
Senior Completions Engineer/Supervisor/Team Manager
* "Ultra HPHT" world status category BCGA project Mako Trough, Hungary (BHP-+17Kpsi, BHT-250º C), unconventional tight gas project. Wells to depths 6085m in Southern Hungary. Deep, hot, low perm/porosity, high rate, high pressure treatment tight gas fracturing. 4000-6000m vertical well depths
* Design assist, manage, Completions/Workovers, HP Frac stimulations, CT completions/ cleanouts, and all cased hole activity (Rig and non-Rig ops)
* Supervise Well Site Supervisors and manage operational team to achieve TXM's goals, objectives, and targets
* Communicate, support, and advise operations team on a daily basis to ensure smooth, cost effective, and safe operations are maintained
* Provide ongoing engineering/operational support during execution of well completion programs
* Plan, prepare high quality completion programs designed to maximize well productivity in addition, ensure safe operating practices
* Completion planning and production design for deepest, hottest well on record in Hungary (6085m, 250ºC)

Dec 04 – Sept 06: TRANSMERIDIAN EXPLORATION, INC - Aktobe, Kazakhstan
Chief Completions Manager/Operations Supt.
* Design, manage, supervise, Completions/Workovers, Fracs, CT cleanouts, acid stimulations, all cased hole activity (Rig and non-Rig), involving onshore H2S carbonate wells to depths 4000m in South Alibekmola Field. Monitor incremental production.
* Plan, schedule Rig activity, equipment design/installation Completions/Workovers
* Provide well candidate recommendations for optimizing production quotas
* Review, recommend service contractors products and materials providers
* Report directly to VP Operations/Board of Directors – Head Office, Houston, Texas
* Supervise, mentor field staff of 95 locals and contractors
* Provide onsite training for company production/facilities staff

Sept 03-Dec. 04: CAIRN ENERGY INDIA LTD - Chennai, India
Rajasthan Onshore Operations
Senior Completions Engineer/Service Rig Superintendent
* World-class heavy oil discovery. Sandstone onshore reservoirs to 1500m
* Select candidates, design, monitor, Completion/Workover programs onshore oil wells
* Workover Rig/Field operations management. 1st "HP low perm" Frac conducted in India
* Cased hole operations, stimulations, Completions/Workovers, wireline, slickline, CHDST planning and supervision. 1st SLB "Max-R" Gun perforating system ran in India
* Plan, schedule Rig activity/Rig selection, budgets, completion equipment status
* Plan; submit tenders/bids completion equipment for all onshore Rig activity
* Recruit; mentor/supervise Indian staff engineers. Upgrade training
* Position nationalized, contract obligations completed

June-Sept 03: TRANSWELD INTERNATIONAL (Aberdeen)
Petronas-Medoc) Madura Island, Indonesia (Onshore)
Completion-DST/Observation Engineer
* Observation Engineer on DST/ Completion operations. Short-term contract callout
* Partner representative to oversee Completion/DST on-site activity
* Ensure safety, budget and accurate reporting guidelines followed during activity
* Report to Board of Directors of JV partner on data result/confirmation

Spring 03: LUNDIN SUDAN, BV (OPC Contract)
Republic of Sudan (Block 5, South Sudan)
Senior Completions Manager/Engineer
* Corporation re-entering country after forced absence due to civil unrest
* Completion/Test programming, well design
* PCP sizing, tubular design, downhole tool, completion fluids selection for Testing/Completion/Production
* Well review, procedure recommendations from production history
* Completion/Test reporting, data control
* Well prognosis, production analysis
* Critical wells for field reserves evaluation
* Well Completion/PCP installation/multi-zone testing supervision
* Contract cancelled, immediate evacuation due to ceasefire violations after 4 month truce

Winter 2003: PAJAK ENGINEERING (Calgary, Canada)
EnCana Corporation (Coal Bed Methane Group)
Senior Supervisor -Completions/Workovers
* Complete/Workover $2MM CBM producer North Eastern British Columbia (Tumbler Ridge-Horn River Basin)
* Multi-zone perforations, water base fracture stimulation
* Zonal isolation, water injectivity testing
* Testing, recording well parameters
* Remote Northern Canada location
* EnCana is North Americas' largest gas producer and landholder

2002-2003: TENGIZCHEVROIL Tengiz, Kazakhstan
Senior Completions Engineer (Seconded to Chevron)
* Weatherford employee (staff position)
* Tengizchevroil Drilling Support Services
* Desk and trouble shooting Supervision Completions/Workovers/Re-completions
* Depths 1500-4500m, 4%-24% H2S carbonate reservoirs
* High production, 30,000BOPD, Big Bore Completions, CRA tubular for 10K and 15K HP completions
* Plan, schedule rig activity, costs and completion equipment status
* Track, record/chart, submit recommendations for non-productive Rig/Well ops

2001- 2002: PETROLEUM DEVELOPMENT OMAN PDO (SHELL)
Sultanate of Oman
Senior Supervisor – Completions/Workovers (Oman South)
* Supervise/Manage Omani staff, Workover Operations, Re-Completions
* Specialty cased hole operations, fishing, wireline, isolation packers, etc.
* Completions, stimulations, BH artificial lift
* Operate, supervise all artificial lift system installations, pumping operations
* Liaison with Service Companies and Contractors
* 1 year 28/28 rotational contract

2000-2001: SALYAN OIL LIMITED (Baku, Azerbaijan)
Superintendent/Manager – Completions and Workovers
* (50% SOCAR, 30% Frontera Resources, 20 % Hess International)
* Design, program onshore Workovers/Re-completions Wells to 4000m
* Supervise, Manage Workovers Department, 5 staff Engineers
* Order support Services, Downhole tools for +200 Well /Field rehabilitation project (1500-4000m)
* Design, supervise remedial cement squeezes, casing repairs, monitor cased hole operations
* Supervise, schedule all operations for 2 (Turkish)Workover Rigs 24/7 ops
* Monitor, maintain cost control, budget guidelines
* Submit daily/weekly/monthly Rig activity/engineering reports
* Reduced Workovers operating costs 33% in 3 months

1998-2000: HURRICANE HYDROCARBONS (PetroKaz 2005) - Kumkol, Kazakhstan
Superintendent - Completions/Workovers/Drilling
* Publically traded Canadian Company
* Schedule, maintain fleet of 8 Workover, 2 Swab, 2 Drill Rigs
* Design Completion/Workover Programs for flowing, pumping wells to depths 1500m
* Design, prepare, supervise acid stimulation programs
* Evaluation, economic assessment of Field/Rig activity
* Supervise, rotate/schedule 120 national and expat personnel
* PCP, ESP, pumping well selection, programming, installation
* Submit daily, weekly Field/Rig/Engineering activity reports
* Supervise, maintain cost control through department budgets
* Operational production increase from 30,000 BOPD to +100,000 BOPD.

1996-1998: VALENS GROUP OF COMPANIES – KYRGOIL (Kyrgyzstan)
Operations Manager - Asian Operations - (Rotational)
* Original start-up team leader, "in-country" Project Organizer
* Order, transport, receive $6 million USD in Western manufactured oilfield equipment to fulfill Kyrgyz contract
* In-country KyrgOil representative, contact for all phases of project; i.e., local labor negotiations, government contracts, support services for incoming crews and personnel
* Reported directly to KyrgOil President/CEO with daily/monthly expenditure, progress reports for Valens, International Well Services, KyrgOil (KPC) (Kyrgyzstan, Central Asia, FSU)
* Office/field operations daily reporting
* Program, supervise, manage 20 well Workover/Fracturing operation
* Monitor, record existing and objective incremental production
* Liaison between KyrgOil (KPC) and Kyrgyz State Petroleum Officials
* Project completed after fulfilling 1-1/2-year contract stipulations. Education leaves.
* BSc. Mechanical Engineering (Distinction) completed, degree conferred 1997.

1994-1996: D & G PETROLEUM SERVICES LIBYA- AGIP (North Africa) Two year consulting contract supervising Completions/Workovers
* Well depths - 11,000-16,500 (3350m - 5200m). High porosity sandstone
* Arab/Italian JOC. Rotational 35/35
* Re-Completions to enhance production 2200 - 7000BOPD
* HPHT wells. (60Mpa, 80C)
* Coiled Tubing acid treatments for conversion to water injection
* Design; supervise acid stimulations Rig and non-Rig (50 - 450m3 volumes)

1980-83, 1990-94: R. H. WHALLEY PETROLEUM SERVICES LTD.
Canada, Montana, Nebraska, Texas
Independent Consultant
* Design, supervision, Workovers/Completions Western Canada, USA
* Operations Manager for multi-well developments. (In-field proven reserves)
* In-house Engineering, project coordination
* Equipment bid analysis, reward contracts
* Continued interim educational sabbatical leaves during career
* Project Management, monitor daily reporting
* Field/office correspondence, troubleshooting

1978-1992: DRILLING/COMPLETIONS/WORKOVERS (CANADA)
* Frontier Engineering Canada – Field and office engineering
* Amoco Canada - Foreman
* Pangaea Petroleum - Field Sup – Completions/Workovers/production-Canada, Texas
* McDonald Engineering and Associates – Staff Field Sup
* On-site Supervision of Service Rigs for Completions/Workovers, HP snubbing operations, well stimulations, fracturing, nitrified acid work, etc
* Continued interim educational sabbatical leaves during career
* Supervise Service Rigs for re-entry, production operations: (i.e., air drilling cleanouts, milling, fishing, plug removal for deeper zone Completions/Abandonments)
* Multi well/field abandonment project management and land reclamation.

1973-1974: DRILLING RIGS (Western Canadian Sedimentary Basin)
Roughneck to Driller (Rig position advancement)

EDUCATION:

1989-1997: (Sabbaticals) BSc. Mechanical Engineering (Distinction)
Almeda University Boise, Idaho, USA

1976-1978: Petroleum Engineering Technology: Major: Production
Southern Alberta Institute of Technology (SAIT Polytechnic)
Calgary, Alberta, Canada

MEMBERSHIPS/SOCIETIES:

Member Society of Petroleum Engineers (SPE #) - 3206113
Oilfield Technical Society (OTS) Calgary, Canada

PROFESSIONAL DEVELOPMENT

1978-2006: Industry Seminars, Applied Courses, and Field Tickets:

Petroleum Industry Training Courses:

* Emergency First Aid and Fire Awareness Training (Petro Canada Tripoli) 2009
* Defensive Driving (Petro Canada Tripoli) May 2009
* HPHT Completion Design (Petroleum Institute for Continuing Education) Houston, Texas Nov. 2006.
* Well Service Blowout Prevention WS–132260-803029 (Exp.07/06/11) (ENFORM Canada)
* H2S Awareness and Escape (PDO Shell-Oman)
* H2S Alert, Awareness, SCABA (ChevronTexaco-Kazakhstan)
* Transportation of Dangerous Goods (Canada)
* Defensive Driving (PDO Shell-Oman)
* Defensive Driving (ChevronTexaco-Kazakhstan)
* Oilwell Cementing Techniques (Amoco Canada)
* Enhanced Site Supervision Coaching Workshop (PDO Shell -Oman)
* Solids Control (Amoco Tulsa, Oklahoma)
* Quality Control Completions (Amoco Canada)
* Workovers and Completions (Amoco Canada)
* Beam Pumping Operating (Amoco Casper, Wyoming)
* First Aid, St. John's Ambulance (Canada)
* Emergency First Aid and CPR (Canada)
* Emergency Firefighting (Safety Boss Canada)
* Workplace Hazardous Material Information Systems (WHMIS)
* Drug Abuse Supervisors Training (Canada)
* Windows, Word, Excel, MS Office,WellEz
* WIMS/DIMS (PDO Shell-Oman 2000)
* Workover Office Pro (personal software)
* The Well Evaluation Model (WEM)

View contact information...
«« previous resume next resume »»
Search Results (Resumes 251 to 300 of 10922)Go to Search Parameters...
Brief Description
Drilling Engineer offshore tender rigs jackups onshore land rigs
process engineer
a senior instrument & Controls engineer
Sr Piping Designer Oil & Gas 3D model
Project management
20+ years experience in Surveying
Senior Planner with more than 20 years experience in Oil & Petrocehmical Industries
Qualified professional Project Manager and licensed US chemical engineer, with 32 years oil and gas and refined products production and processing facilities, pipelines, stations and terminals.
Piping Engineer/Designer
About twenty years' professional experience as a Commissioning and as Front line Operator in LDPE plant in RIL & LLDPE Plant in YANSAB with strong educational background and training.
Presently working as Drilling Manager with Transocean started up the project in India for 5 Jackup rig for ONGC along with Tony Flynn who was than our GM -Integrated services in May 2006. Direct responsibility is managing T12 and JTA ( 300' Jackup)on day to day coordination, planning and execution
AutoCAD drafting, Drawing, Painting (Acrylic, Oil, Water Color), Airbrushing, Faux Finishing, Murals, and Computer Graphics /Illustrations. Software: Adobe Illustrator, Adobe Photoshop, Adobe Streamline, Adobe 3D, Flash, Fractal Painter, Quark Xpress, Microsoft Word, Power Point and various scanning
Instrumentation, Control and Safety Systems Design Engineering - Projects
A Professional Engineer with over 18 years' experiences in Process Control Systems for the design, development & implementation of process control applications, oil storage, movement & blending applications and process training simulations. Extensive knowledge in Honeywell Distributed Control System
(Maintenance with Procurement Exposure)
Initial four (4.0) years of Detail Design experience is in the field of Civil and Structural design of various Multi storey Buildings, Bulk drugs (Ranbaxy Module 5), Auto Industry, Chemical industry, Oil & Gas, Captive Power Plants, Machine Foundations, including Sub & Super structures for various i
Instrumentation and control engineer and instructor Phd neural fuzzy modelling and identification, optimization using genetic algorithms
21 years experience in corrosion engineering, monitoring and applying corrosion mitigation strategies to oil/gas/petrochemical industry. Detailed experience in cathodic protection (CP), pipeline integrity, chemical treatment, corrosion monitoring, coatings and corrosion/mechanical damage assessment.
21 Years Experience of Process Engineering in Refinery/Oil & Gas
A geologist currently working with a major oil companies, specialized in reservoir characterization, formation evaluation, operation geology and geosteering in clastic reservoirs. Develop expertise while working in Australia, Saudi Arabia, North Sea, India and several other international projects.
To be fair to everybody. Shared gain knowledge¡¦s and experienced for the benefits of all and to obtain a position with a progressive company that will utilize my experience, broaden my Knowledge, and offer opportunities for advancement.
Possess a career that spans for over 25 years within the Oil & Gas, Construction, Operation and Maintenance and Manufacturing Industries, performing contract formation and administration work.
Specialised in the design and structural engineering calculations for high integrity mechanical handling systems up to 25,000 tonnes SWL.
26 Years land and project management experience
Oil & Gas Volume Professional
B.E(chemical from dharwad karnataka)
Free! 19 years experience in Production Engineering, Production Operations, workover and service rigs for Artificial Lift equipment, operations supervision and administration.
CHEMICAL ENGINEER HAVING TWENTY FOUR EXPERIENCE IN PETROCHEMICALS MANUFACTURING
34 years experience in Project management, plant construction, commissioning, maintenance, and inspection, with knowledge of Permit to Work systems, experience at man management and engineering levels, and multi discipline supervision. I communicate well on all levels technically & professionally
I have been working for Shell for about 21 yrs now. I joined Shell as a wellsite peterolem engineer in August 1988. Before then I worked for 4 years in Gas and steam electric generating station rising to the post of senior mechanical engineer. I have a Bachelors degree in Mechanical Engineering
Worked as Prod. Sup. /Sr. Prod. operator in FPSO, Gabon/Angola, Al Furat Petroleum Company, Syria, Petroleum Development Oman and Madras Fertilizers Ltd (Urea process plant), India. Have 32 yrs of exp. in operation and commissioning of oil/gas facilities.
Project Controls Engineer, Cost and Schedule, 1984 Civil Engineering graduate
A challenging position as a Geophysicist which will provide an opportunity to use my geophysical skills.
Wide range of experience in Oil & Gas Subcontracts preparation, evaluation and administration.
Revenue, Gas Accountant, Gas Balancing, Scheduling, Marketing
37 years in oil & gas land, seeking contract or perm, willing to relocate
Work Experience. 30 years experience in HR administration in government service, 2 years experience as HR Officer in a political party office and 6 months experience as HR officer in a large oilpalm plantation.
I am a team player and enjoy the challenges every project brings. I am also very capable of independently completing and working on projects alone. I have been involved with a variety of projects, and taken many of them either to IFC or as built stage as required.
Have 20+ years of Accounting experience in refinery, both at corporate and plant level. Held various positions and looked for opportunities to accept additional duties and advancement.
Petroleum Engineer with a solid management experience in Mexico, Latin America, UK and Canada. With specific strengths: leadership, teamwork, customer focus, integrity, marketing and sales and build key accounts. Very good knowledge of PEMEX, Petrobras and NOC's.
Completions/Workovers Operations Manger/Engineer
Over 18 years Oil and Gas experience and have been involved at all levels of conceptual, Front End Engineering, Detailed Design and operational support
Having more than 18 years of working experience as a Wellsite geologist, Mudlogger in Oil & Gas, Geotechnical investigation, Hydrogeology, research & Management. Worked on horizontal, directional & vertical wells for conventional & oilsand coring projects, to examine & describe drill cuttings.
Workover and completion operations engineer
Sr.Staff Geophysicist with more than 35 years of oil industry experience. Generated drilling plays in several basins around the world (Canada, Egypt, Oman, Libya, UAE, Cameroon (Offshore. Structural & Stratigraphic plays. Also overthrust belt experience in Oman & Foothills of Alberta.
Bachelor Science degreed as Civil Engineer with 23 years of professional experience in different job positions in petrochemical, fertilizer, power plant and open coal mine, related with design, engineering, construction and maintenance of reinforced concrete structures and steel structures.
Engineer - Geologist of Oil and Gas Exploration
I would like to apply for a position as Chief Engineer / Maintenance Supervisor with your company where my experience, training and good work habit will be asset to your company. The attached resume covers my 33 plus years of offshore / oilfield / maritime experience as Maintenance Engineer
Astute result-oriented professional with over 28 years of experience (an EPC background with major international contractors, where the work involves execution of a multi-disciplined Engineering Design, Procurement, Construction and Commissioning service especially in OIL & GAS FIELD) in project man
Specialist in Offshore Installation Inspection in Mechanical & Piping
First   1   2   3   4   5   [ 6 ]   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com