Resume - Able to prepare welding procedure/ welder qualifications, organize for hydostati...

Misco Jobs

Resume #84127

CONTACT INFORMATION:
View contact information...

WELDING INSPECTOR (AWS CWI)

Career Summary

18+ years of experience in engineering and construction activities in Oil field, Petrochemical, Refinery and gas handling projects.
* Broad knowledge of oil and gas facilities and construction management.
* Demonstrated experience in various projects.
* Review of project QA/QC and HSE plans and monitor for the system implementation.
* Review all procedures, Quality inspection test plan and method statements prior to commencement of any activity.
* Prepare WPS, monitoring the procedure qualifications and subsequent welder qualifications, piping/pipeline welding inspection, pressure test and coordination with sub con/client.
* Verify welder performance records and recommend steps to minimize weld repair rates.
* Verify and maintain the calibration status of necessary Inspection & Testing Equipment.
* Ensure that all the required tests are properly conducted and reports submitted on them.
* Preparation of final dossier and handover to Commissioning team.

Educational Qualification: Diploma in Electrical and Electronics Engineering.

Technical Qualifications: AWS CWI (CERT. NO: 08082441).
ASNT NDT Level II RI
ASNT NDT Level II MT
ASNT NDT Level II PT

Trainings Attended: Construction Risk Assessment from TOTAL E & P
YEMEN.
Valid driving permit from TOTAL E & P YEMEN.

Key responsibilities and functions

* Observe all safety regulations.
* Planning, management and coordination of all activities associated with the construction, installation and commissioning of oil and gas facilities.
* Review that materials supplied by Contractor have Inspection Release notes from recognized Third party inspection agencies.
* Report to QA/QC manager on the performance of the Quality Management Systems and the need for improvement.
* Active liaison between various groups on the project, including engineering, construction and installation contractors/Operations.
* Responsible for establishing and ensuring that preventive action are implemented and corrective actions are taken within the area of responsibility.
* Establish and maintain liaison with the Client's QA/QC representatives.
* Monitor the status and disposition of any non-conformity on the project.
* Provide response based on root cause analysis for quality issues, and corrective action requests.
* Visual testing of welds for meeting codes and client specifications.
* Coordinate for NDE's with third party inspections when necessary.
* Release pipelines and piping for hydro testing.
* Quality surveillance, witness for hydro testing and documentation review.
* Carry out final inspection, prepare punch/ defect list and any other document, certify and clear for pre-commissioning activities.
* Preparation of contractor performance report and project close out report.
* Represent company in all meetings/discussions with the Client's QA/QC representatives.
* Initiate, organize and chair weekly site technical meetings and monthly progress meetings and report on them.
* Ensure that Contractor / Employer's obligations under the agreement are strictly adhered to.
* Review the training program submitted by the Contractor to ensure that it is beneficial to the Client.
* Assist in performance of Internal Quality Audits and ensure any corrective actions needed are followed up and cleared.
* Coordination of shut down activities, as applicable
* support for ISO certification and training compliance
Employers Profile:

01. Masarco Oil Field Services Co, Yemen - September 2003 to till.

Client: Total Exploration and Production at Kharir block-10.

Position: Senior QA / QC Engineer(Welding inspector)

02. M/S.Unitech Machines Ltd, New Delhi - July 1996 to August 2003

Position: QA/ QC Engineer

03. Gulf engineers & Constructors Pvt Ltd, Chennai - Feb¡¦91 to June ¡¥96

Position: Piping Supervisor

Personal Summary
Date of birth 07.05.1970

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5251 to 5300 of 10821)

Go to Search Parameters...

Brief Description

PDMS,Auto Cad,Hypermesh,

Cementing Engineer, Technical Professional

I am currently a process operator at Hovensa LLC, a 495,000 bpd refinery, located in the U.S.V.I. I am certified to operate both crude and vacuum units and am training to certify on an amine reclaimation unit. Job skills and responsibilities are listed on attached resume.

Chemical Engineer from Venezuela with unfinished MSc, FLAIR Operator in Geoservices, marketing research experience on Plastic Industries, Reservoir Simulation experience from PDVSA-INTEVEP. Interested to work worldwide, specially Australia.

Passed out Diploma in Instrument Engineering through NATIONAL POLYTECHNIC from July’ 1993 to May’ 1995

11 YEARS OIL & GAS INDUSTRY EXPERIENCE

I am a QA/QC Engineer with over 8 years experiences currently work in Saudi Arabia as a Senior QA/QC Engineer ( QC Supervisor ARAMCO SAP No. 70009461 in GAS Plant ( 3 Sulfur recovery units and 3 Gas Sweetening Units...) Kindly check the attached CV for all details.

Preparing quantity schedules and bills of materials managing project costs and performing cost analysis. Managing different project quantities related to the implementation of the project such as, materials, equipment and resources. Forecasting project quantities and ensuring that construction costs

Directional Driller 7 yrs Exp.

B.sc(Hons) chemical engineering with 7 yrs Experience in Drilling Fluids Technology

Material Engineer (Cathodic protection, corrosion, coating and painting)

Piping designer with 10 years experience of Oil & Gas, Petrochemical & Manufacturing industry.

Familiar work with computer office and internet

Electrical, Instrument, Electronics Engineering 20+ years

Working as: Heath Safety and Environmental Engineer for Snamprogetti S.A. Ltd At Saudi Aramco

Most of my experience includes researching abstract and running title in Texas and Louisiana. My experience also includes working as both a mineral agent and perimit agent for 3-D seismic. I have 3 yrs total experience in the business. Most recently I worked doing field due diligence in Louisiana.

My background is Drilling Engineer and I have a first experience as drilling supervisor, so I want to build my career in the world of drilling.

Able to prepare welding procedure/ welder qualifications, organize for hydostatic test and witness the same, prepare the final dossier for the project and submit to the commissioning team. Diploma in electrical and electronics engg, AWS Ceertified welding inspector and Level II in RI, MT,PT

Nine years of mechanical engineering experience: One year working as client mechanical/facilities lead engineer on major offshore FEED BOD. Two years providing engineering, procurement and construction management services to onshore oil & gas producers and pipeline transportation companies.

Working as senior telecommunications technician for a big gas company.

Implementation Manager or Technical Project Manager

I am Design Engineer. My most recent experience was design an automatic steel strip coil tensioning and recoiling line . I was responsible for the overall product design, workshop drawings and hydraulic and pneumatic circuits. I developed the first draft of the operator's guide.

Goal oriented loss prevention and emergency response professional with a wealth of qualifications dedicated to providing solutions to challenging problems, to aiding in safe work practices and loss prevention.

Wide experience in oil/gas exploration (off-shore, land, in-house, in the field, & onboard) *12 Yrs.*. INTERESTED: posts with responsibility, challenges, that utilise my skills and expertise, like: marketing, HR, recruitment, client rep, managerial (exploration /E&P),..**This list is NOT exclusive.

Petroleum Geologist 12yrs. Experience working in deepwater projects. Prospect Generation to Value. Landmark software, excel &power point. Good communication & presentation skills. Experience and success working with partners & governments. Good self starter and team player. Available ASAP.

12 years in the oil field, North Africa. Looking for position as Workover/Well services/completion/Well test Supervisor. Arabic/English speaker.

Instrumentation Engineer with over 12 years experience in Calibration, Installation, Loop Checking, Inspection, Commissioning and Maintenance of field instruments ,PLC and SCADA systems. Indian Citizen.

With more than 12 years in Petrochemical and Paper industry and in various positions and discipline.

Mechanical engineer with 12 years of experience inside the petroleum industry; specifically as Productivity and Production Optimization Engineer. Primary skills in well productivity, production technology and operations including well completions, well performance, stimulation and well testing

Highly motivated and intelligent, with sound commercial ability and well developed analytical skills. A proven self starter, creative and co operative team player with the drive and ability to work in challenging environments.

I am working in Power Plant from last 12 Years as a Instrument and Control Technician.

High Energy, trustworthy, successful, experienced, Senior Director of Credit, Collection, Accounts Receivable, Customer Service, AR Business System management, Operations and Administration looking to partner with talented, growth oriented company, on a temporary, contract or direct basis.

Strong Skills in Reservoir Monitoring & Surveillance coordination though team work integration for Gas & Water Secondary Recovery Projects. Reservoir definition & delineation through well data collection. Development Plans to assure production profiles requirements. Gas & Water Conformance.

To lead a team involved in the drilling activities of a growth oriented oil and gas servicing company.

Rover operator

At present I am working as a SAFETY OFFICER with an EPC contractor doing construction of double wall LNG tanks in Qatar .

Marine Maintenance Supervisor & Machinery Watchkeeper

Contracts Engineer, Cost Engineer, Quantity Surveyor

Resutls-Driven Structural Analysis Engineer

I am an electrical Engineer having experience in Power and process Plant, control system, planning,design and execution etc.

Combined experience in design and construction

Graduated in computer science subject

Expert in computer application packages, Good leadership skill, Microsoft Certified professional. Commendable human relationship

CV of Chemical Engineer (B.Tech.), Experience in Process Chemical Plant

I have work for the every and each department of Construction and Engineering; Please refer to my CV all details ;

all kind of barge handling,maintanence,movement,anchor handling,loading,offloading the heavy equipments,maintanence of engines,generators,pumps,winches,motors,etc

geophysical engineer

Dipolama in mechanical engg Pro/Engineer/Autocadd/Soildworks

10 years of experience in oil and gas industry. Experience in mud logging and working on service rigs. Extensive experience in planning and executing well completions, drill stem tests(Open hole and cased hole), rig and rigless intervention; Artificial lift; budgeting, tendering and evaluation

Senior PDS and/or PDMS Structural Designer. Experience in all aspects of design; from conception of design (FEED), layout work to detail design in the Oil and Gas (onshore/ offshore), Refinery/Petrochemical plus Power Generation industries for EPC&M companies in Europe, Asia and Australia

First Prev 101 102 103 104 105 [ 106 ] 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out