Resume - I&C Technician with geothermal experience

Misco Jobs

Resume #84151

CONTACT INFORMATION:
View contact information...

Experience

8/2006 ¡V 11/2008
Fagen Incorperated Granite Falls, Mn.
Startup and Commissioning Corporate Representative

Successful check out, startup and commissioning of 12 ethanol plants totaling nearly 1 billion gallons per year capacity.

Activities and responsibilities included:
„« DCS programming verification and modification/correction feedback
„« DCS network functionality including fiber optics
„« DCS I/O loop checkout
„« Mechanical functional checkout of all rotating equipment
„« VFD programming
„« Tank farm, plant vessels, and piping system water trials
„« Calibration and functionality of all field devices such as transmitters, valve actuators, sensors and switches
„« Plant maintenance personnel training
„« Plant startup and performance run

2004 to 2006
Cal Energy, MidAmerican Energy Company. Calipatria Ca.
I&C/DCS Technician
Instrumentation and DCS support for 13 generating units in 6 geothermal power plants. Designed and installed a fully documenting automatic pressure calibration system using Druck hardware and GE Sensing InteCal software. Configured 3000 plus instrument database and trained I&C technicians on use of system.

Systems supported and other responsibilities:
„« Foxboro I/A DCS running on Sun Unix platforms
„« Emerson Delta V DCS running on Microsoft NT4
„« Woodward Governor, Triconix, and Mitsubishi governor control systems
„« Fuji, Westinghouse, Mitsubishi and GE steam turbines
„« Bently Nevada temperature and vibration monitoring systems
„« RTX and Hathaway plant data logging systems
„« Root Cause analysis of turbine trips and equipment failures
„« PLC and ModBus SCADA systems
„« I&C maintenance, repair and calibration on all field devices including transmitters, Hart and FieldBus devices, valves, hydraulics, etc.

2001 to 2004
Champion Systems, Jamestown N.C.
HVAC Control System Engineer

Activities included:
„« HVAC control system engineering and design
„« Hardware specification and engineering submittals
„« DDC control system software logic design for chillers, boilers, air handlers, cooling towers and pumping systems using Delta Control software
„« Computer HMI screen design using Delta Control Orca View software
„« BacNet configuration and device networking checkout and startup
„« System installation, checkout and commissioning.
„« Customer training, drawings and O&M manuals

1998 to 2001
Systemation, Applied Services Division, Fairport N.Y.
Systems Integrator

Successful systems upgrade at the Rochester NY Van Lear WWTP included three Flottweg centrifuges for sludge dewatering. Binghamton ¡V Johnson City WWTP plant wide upgrade including new odor control building.

Supported systems and activities:
„« Citec software
„« Opto22 I/O
„« Modicon PLC's
„« Provided Foxboro factory trained field services
„« Supported Sales division with field services

1985 to 1998
Total Control System Services, Inc., Varysburg N.Y.
Part Owner

Started and grew business supporting 5 full time employes.

„« General business management
„« Manufacturer's representative for several major lines of instrumentation
„« Repair, calibration, maintenance, installation and start up of instrumentation and control systems
„« Provided technicians for plant shutdowns and outages

The Foxboro Co., Foxboro, MA.
Systems Analyst

Commissioning of upgraded (pneumatic to electronic) reactor vessel cooling system, Yankee Atomic Electric, Rowe Ma. Checkout and startup of Niagara Mohawk Unit 7 Oswego NY Steam Plant.

Activities:
„« Provided field services for entire Foxboro product line
„« Specialized in power system and boiler control system start up and commissioning for utility and industrial fossil fuel applications.

Education
A.A.S. Electrical Technology, Erie Community College, Williamsville, N.Y.
Additional course work
Invensys Triconix System Maintenance for turbine controls
Foxboro I/A System Maintenance 2005
CiTec software configuration
Delta Controls OrcaView software configuration
BacNET configuration
BJ Systems Software (QNX) for process control
Foxboro/Eckhardt control valve sizing and specifying school
Foxboro Service Representative Power Systems Course for boiler and combustion control and commissioning
Foxboro Users course on power systems and boiler control
Foxboro Service Representative Training School
Foxboro Spec200, VideoSpec/MicroSpec, VideoSpec4, Spectrum DCS, Fox3/Fox300 and Foxboro scaling course for process control.

Licenses
F.C.C. General Radio Operator license (Old FCC First Class Commercial)
F.C.C. Amateur Radio License Advanced

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8001 to 8050 of 10816)

Go to Search Parameters...

Brief Description

Date of Birth : 29th February 1980 Branch : Electrical Engineering Institute : Jaipur Engineering College & Research Centre, Jaipur Languages Known : English, Hindi

See below.

Entry level petroleum engineer with strong background in reservoir modeling/simulation, well logging/correlation, production engineering and petrophysics. Excellent knowledge and experience with various computer applications and packages. Excellent problem solving and analytical skills.

To Become employed as a Instrument Designer

Three years of project controls experience in estimating, costing and scheduling/planning.

Over 8 years experience in the field of Lifting Equipment Inspection, QA/QC activities, Welding inspection, Product Inspection and Material Inspection.

I see basic understanding of geology, pore pressure prediction, procurement and bid process, drilling and rig equipment, well control, safety and risk analysis, well construction. I can work in teams or independently.

Resevoir Engineer

TO SECURE A POSITION IN WHICH MY EXPERIENCE AND SKILLS AS A REFINERY/CHEMICAL PLANT PROCESS TECHNICIAN WILL BE OF VALUE TO YOUR ORGANIZATION.

I am a 4th class Steam Engineer with 4 years experience in the Ammonia Refrigeration field. I am currently looking for employment in the oil and gas industry. I am very interested in furthering my career as a Steam Engineer.

Qualified E&I Technician with full understanding and experience in the installation, calibration, repair, testing and maintenance of nucleonics, various control systems, measurement equipment, fire & gas systems, fiscal metering, motor control, distribution and electrical installation.

Graduate Mechanical Engineer with a passion to work in an oil and gas platform.

Ambitious, enthusiastic and career-conscious, I am keen to acquire new skills and form part of a successful team. I would like to travel and apply the skills learnt during my Geophysical Sciences degree. Seeking to embark on a long and successful career in geophysics.

Engineering graduate with electrical branch

To pursue an excelling career in an organization that provides challenging and responsible opportunities where my analytical and functional skills and abilities will be an asset.

I am a Petroleum Engineer with a degree from the University of Oklahoma. I have two and a half years of experience working on offshore rigs in the Gulf of Mexico in drilling operations. I am interested in opportunities in the fields of drilling, reservoir, well or operations engineering.

Condition monitoring Engineer

Mechanical Engineer

Graduated in B.E. (Chemical Engineering) from Gandhi Institute of Engineering and Technology (GIET), Gunupur, under Berhampur University With 69.32% marks

Four and a half years of production stimulation experience in the oilfield, including job design, execution and evaluation. Proven proficiency in fracturing, gravel pack and matrix acidizing with knowledge of logistics and operations management.

An energetic, enterprising and hardworking strategist

MBA (Finance) Bronze Medalist with strong financial & credit analysis and risk assessment skils.

sales, marketing, business development general management

Engineering and Management

Drilling & work Over Supervisor, Master degree, 5 years experience in Offshore & Onshore operations

Excellent analysis and problem solving skills and able to multi task in industrial sites, factories and refineries. Have knowledge of electrical utilities and power. Expert ability to resolve conflicts during all stages of a project.

Experienced Document Controller in FPSO industry. • Knowledge on Electronic Data Management System (eDMS). Proficient in Windows Application (MS Word, Excel, Outlook and Powerpoint)

to obtaian a job

I've been working in the diesel business for over 10 years. I do everything from general maintenance to major rebuilds. From office type work to operating equipment when need be.

27 years experience primarily in oil & gas EPC/EPCM Project controls, Contracts, project management and engineering.

PETROLEUM ENGINEER WITH 6 YEARS EXPERIENCE IN DRILLING, COMPLETION AND WORKOVER

I have several years of experience working in international trading (export and import), manufacturing, international shipping, and forwarding companies. During this time, I have obtained excellent knowledge of domestic and global logistics, and supply chain management.

16 years exp. in Design/Drafting, Softwares AutoCad 2004, Microstation J/V8, IRASB, AutoCad Overlay, HVAC system layouts Duct layouts, Equip,Layouts, Utility/Fire prot.sys layouts,Steel Structural detail drgs, Familiar in Int.stands.Exp.in High Rise, Industrial/Commercial Bldgs, Housing, Airports

I am a qualified analytical chemist, possessing extensive experience in international aspects of operations (U.S. EPA regulations, ISO 9001/14001/17025 standards, Project Safety Management PSM/OHSAS) with a wide range of technical proficiency in Health Safety Environment, waste management and docume

Bachelor of Engineering (Chemical), Bachelor of Engineering (industrial)

Many years of experience, very detailed orientated.

Mercahant marine

Senior Manager looking for a new challenge with expectations of executive advancement upon successful proof of capabilities

Electrical engineer with experience in oil field electrical construction works. Possess IRCA cerification for Quality Management System and MS project and autocad 2000 certification

Twenty plus years of experience in electrical construction, maintenance. International experience in Middle East and South America. Willing to discuss any and all opportunities available.

Chemical Engineer with experience in production with a reputed Petrochemical industry as Engineer (Production). Responsible for operation and maintenance of Production section which includes a Hydrogen plant using Catalytic steam reforming process and an Auto-oxidation plant for peroxide.

Commissioning, Testing and Maintenance of Generators, static excitation system , Protective Relays, 220kv Switchyard, Power Transformers, 6.6kv Switch Gear 415v Switchgear, 415VMCC

A B.Eng. degree, 2nd class honours (upper division) in Civil Engineering. He has worked with several copamies since his graduation and has acquired experience in his field of study. He is a good team player, honest, hard working and timely.

I'v the pleasure to present my c.v to all your respected well known organizations

An Oil And Gas Professional with an experience in handling technical and experience to coordinate with all related and responsible departments relating and involving to plants¡¦ operation and performance , to provide technical , service and commercial support to customers and end ¡V user¡¦s

Ten years working experience in the oil and gas industry, dispensing the role of QA / QC Inspector for Piping, Pipelines, Pressure Vessels, Steel Structures and Welding from fabrication and installation to pre-commissioning of oil production facilities, oil refineries, natural gas plants etc.

I&C Technician with geothermal experience

Petroleum Engineer with 3 years of experience in the Oil Industry, Production Supervisor (1 y), 230 wells SRP, PCP, ESP. Logging Engineer (2 y). Responsible, team player, work under pressure, team leader, analytic. Computational skills.Ready to be relocated. Toefl IBT 100/120

QC Engineer/Inspector (Piping/Welding) with CSWIP 3.1

A well organized, dedicated professional, developing, presenting, and implementing value added recommendations for the improvement to the companies overall goals and employee¡¦s performance.

First Prev 151 152 153 154 155 156 157 158 159 160 [ 161 ] 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out