CONTACT INFORMATION:
View contact information...
EDUCATION
Texas Tech University, Lubbock, TX Fall 2002 – Fall 2006
Bachelor of Science in Civil Engineering
EIT Certified
Member of the American Society of Civil Engineers (ASCE)
JOB SKILLS: Microsoft Office, SmartPlant, RISA 3D and Foundation software; DesconBrace, DesconWin, PCA, Baseplate, Momcon, Horizontal Vessel, PVAP, SVAP, MathCAD, HCSS, Timberline
WORK EXPERIENCE
Fluor Corporation, Sugar Land, TX January 2007–June 2009 Associate Design Engineer II
British Petroleum Whiting Project-
* Worked on British Petroleum Whiting Project, a downstream project originally worth $3 Billion that became worth $5 Billion.
* British Petroleum Whiting Project involved the revamp and new construction of the Whiting Refinery, one of the United State's oldest refineries.
* Worked on the PS12 section, PS12 is a single section of Whiting Refinery with new Vacuum Structure and Tower, new Fractionator Structure, new Heaters and their Piperacks and Equipment.
* Worked as a new-graduate/EIT level Civil/Structural/Architectural engineer alongside licensed Structural PEs registered to practice in Texas, Illinois, and Indiana.
* Worked in conjunction with British Petroleum Clients and Fluor Pipeline, Electrical, Mechanical, Process, Project Controls, and Estimating departments on project.
* Did all Structural Engineering and Design in compliance with AISC 13th edition Steel Construction Manual, ASCE 7-05 Minimum Design Loads for Buildings and Other Structures Manual, ACI 318-05 Building Codes, ASCE Blast Design in Petrochemical Facilities guide, Fluor Process Industry Practices and British Petroleum Project Specifications.
* Engineered and Designed Mat Foundations using RISA and PCA Column software.
* Engineered and Designed Pump Foundations using RISA, PVAP, and SVAP software.
* Engineered and Designed Electrical Manholes using RISA software.
* Engineered and Designed Concrete Heat Exchanger Piers using PCA Column and RISA software.
* Engineered and Designed Concrete Horizontal Vessel Piers using PCA Column and RISAsoftware
* Engineered and Designed Steel Fractionator Structure using RISA, DesconWin, DesconBrace, Baseplate for Windows and MomCon software.
* Engineered and Designed Steel Piperacks using RISA, DesconWin, DesconBrace, Baseplate for Windows, Foundation for Windows and MomCon software.
* Engineered and Designed Steel Equipment Platforms using RISA, DesconWin, DesconBrace, Baseplate for Windows and MomCon software.
* Engineered and Designed Steel MPS using RISA, DesconWin, DesconBrace, Baseplate for Windows, Foundation for Windows, and MomCon software.
* Designed Pile Cap foundations with Auger Cast In Place Piles via Hand Calculations.
* Designed Spread Footing foundations via Hand Calculations.
* Designed Blast Resistant Buildings via Hand Calculations.
* Participated on-site verifying measurements of existing equipment to be revamped at Refinery.
* Participated on-site inspecting of existing equipment.
* Participated on-site verifying locations of new piperacks and equipment to be installed.
* Managed distribution of Pipe Stress Isometric drawings showing Pipelines with their loads.
Texas Tech University-
* Recruited students from Texas Tech to work for Fluor.
* Went to Semester Job Fairs in 2008.
* Went to ASCE chapter meetings as Fluor's Civil/Structural department liaison.
Kennedy Porter Associates, Baltimore, MD Summer 2006
Engineering Technician
* Worked in conjunction with Maryland State Highway Administration (SHA).
* Did Structural Analysis of Vehicles in excess of 120,000 lbs. across SHA-Owned Bridges.
* Escorted Vehicles in Excess of 200,000 lbs. across SHA-Owned Bridges.
* Learned about Bridge Design based on H-20, HS-20, HS-25, and T-3 Trucks.
* Learned about Structural Members for small scale structures such as Bridges and Boardwalks.
* Did reconnaissance work photographing pedestrian bridges to be repaired in various state parks.
* Designed spread footing foundations for small scale structures manually.
CFS Engineers, Columbia, MD Summer/Winter 2005
Engineering Intern
* Participated in the Land Development of Preserves of Piscataway, a residential subdivision in Prince Georges' County, Maryland.
* Manually plotted road cross sections for planning cut and fill purposes.
* Manually calculated storm water management pond volumes.
* Manually drafted and calculated floodplain areas.
* Drafted storm water sewer profiles on AutoCAD.
* Drafted Elevation Checks for Sewer Design purposes on AutoCAD.
* Participated on surveying crew during field assignments.
Bradshaw Construction Corporation, Ellicott City, MD Summer 2004
Engineering Intern
* Participated in various tunneling construction projects in the states of Maryland, Pennsylvania, South Carolina, and Georgia.
* Manually plotted soil logs for tunneling purposes.
* Learned how to bid projects using HCSS Heavyjob and Heavybid software.
* Made emergency part deliveries to various construction sites often going across several states.
* Participated in the legal side of bidding projects verifying legal requirements for local, state, and federal regulations, scheduling, and participation of MBE/DBE subcontractors in projects.
* Worked on construction crews drilling a wastewater storage facility.
* Worked on construction crews assembling tunnels through pipe jacking method.
* Worked on construction crews surveying sewer line to be installed via microtunneling method.
PROFESSIONAL REFERENCES
Available Upon Request
View contact information... |