Resume - A Well Services company manager with almost 30 years of industry experience; my ...

Misco Jobs

Resume #84264

CONTACT INFORMATION:
View contact information...

EMPLOYMENT HISTORY –

District Manager BJ Services New Zealand
April 2005 – PRESENT
Management of the day to day operations for the following Well Services operation in New Zealand. Onshore and offshore operations which includes fracturing (CBM and Tight gas), cementing (Oil-well and Geothermal) as well as Coiled tubing operations. (CTU and DUCT) Setting world records for longest single fired horizontal perforating guns.
Involved regularly with customer account Managers to determine strategic plan of attack to win work. Meet regularly with all clients to discuss ways of improvement for services.
Spend numerous hours at the wellsite, checking operations and ensuring that they meet our Key Service Quality Requirements.
Provide continual feedback / coaching sessions transmitting my knowledge I have gained over the past 30 years.
Maintained steady fiscal growth each year of operation, and grew from 3 employees to 37 within my time in operations.

Stimulation Manager, BJ Services Dongying China
MAY 1998 – April 2005
Defining and establishing the corporate business direction and path for BJ Services Fracturing and Coiled Tubing Services
Leading the attack to improve service delivery through implementation of well thought-out standards, comprehensive training and enhanced equipment design. Assist in developing new business units and participate in contract negotiations.
Provide instruction on western fracturing procedures, and train personnel to repair and run all down-hole tools for Chinese National Fracturing Company. Travel throughout China to various wellsite operations to perform site audits and safety checks.
Perform contract fracturing for "Third Party" operations utilizing locally sourced stimulation equipment while still maintaining the company standards for quality and HSE.

Stimulation Manager, Canadian Fracmaster, Vakh Russia
June 1989 – May 1998
Led a team of over 400 people in achieving exceptional operational results and delivering amazing shareholder value.
Throughout a rapid growth period since 1988 in which my division tripled its revenue, the Canadian Fracmaster team has been able to significantly improve on all Health, Safety and Environmental metrics.
Effectively secured long-term business contracts to ensure the success of the Canadian Fracmaster operation now and in the future.
My goal during my 9 years in Russia was for Canadian Fracmaster Ltd. to become the "Company of Choice" for our Employees, our Customers and our Share Holders.
We were the first fully contracted "Western" service company to enter Russia during the Communist era and we achieved phenomenal growth to 3 large operations of over 1500 employees.
My team provided training and operational supervision for a complete diverse well services group, which included all facets of operation from work-over rigs, a transport fleet, and 3 stimulation operations. Our stimulation operations covered everything from complex matrix acid to fracturing and sand control. (gravel packs and frac packs)
Responsible for the delivery of superior instruction for a diverse population of trainees, overcoming a language barrier and eventually performing all operations using local dialect only.

Service Supervisor, Canadian Fracmaster, Red Deer, Alberta
Grande Prairie, Alberta
Waskada, Manitoba
Estevan, Saskatchewan
Whitecourt, Alberta

November 1980 – June 1989
While serving as a Service Supervisor for Canadian Fracmaster in various locations within Canada, my team focused on delivering exceptional service quality to ensure the long-term success of any of our operations.
During my tenure as a Service Supervisor, our team was able to significantly improve on all Health, Safety and Environmental indicators. We achieved this by following strict safety and HSE standards as dictated by the industry.
While acting as Service Supervisor I provided supervision on all aspects of well services from cementing, acidizing, fracturing, to CO2 and nitrogen pumping.

Service Supervisor BJ Hughes, Whitecourt, Alberta
February 1979 – November 1980
Responsible for maintaining a high level of service delivery for cementing operations. This included ensuring adequate availability of resources, competent personnel as well as complete maintenance on all equipment.
Successfully completed the training and front-line operation phase of my career in During this period I became proficient in the operation of a wide variety of oilfield service pumping and mixing equipment.
Continually demonstrated technical as well as operational competence in cementing, stimulation and matrix acidizing

EDUCATION

Graduate Grade 12 – Charlottetown Rural High School, 1977, Prince Edward Island, Canada

SPECIALIZED TRAINING

06/18/2009 Well Service BOP Certificate
06/24/2009 Safety Management and Regulatory Awareness Certificate

10/22/1996- Canadian Fracmaster Management Development Course

07/06/1998-BJ Services Strategic Planning and Team Development Course

04/05/2000-Covey 7 Habits of Effective People

07/05/2000- BJ Services Value Added Profit Course

13/12/2002- BJ Services Job Data Processing Course

16/10/2007-BJ Services Leadership for Safety Excellence for Supervisors 2004

06/02/2007- Transport New Zealand Transportation of Dangerous Goods

10/04/2007- BJ Services Frontline Leadership

17/04 2007-Det Norske Veritas Modern Safety Management
Strong interpersonal and communication skills.
Excellent all-round computer skills.
Full drivers license
CANADIAN FRACMASTER Advanced Training Module – Acidizing, 1985
CANADIAN FRACMASTER Training Module – Cementing, 1987
CANADIAN FRACMASTER Training Module – Stimulation, 1989
CANADIAN FRACMASTER Training Module -- Nitrogen 1989
Site Oilfield Services Training Down Hole Tools

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6751 to 6800 of 10816)

Go to Search Parameters...

Brief Description

Dec 2002 Shift/ - Board Supervisor. Jan 2002 – Sept 2002. Shift Team Leader / Panel Trainer. June 2001 – Dec 2001 Start-up - / Shift Team Leader. Nov 1991 – June 2001 Panel Board Operator and Lead Operator.

Civil engineering graduate with 13-years of professional working experience as a Senior Document controller in gas and oil industry. A computer literate, familiar with EDMS, QVP and Plantdoc programs used in project documentation.

Profile Total of 6.5+ years of IT experience with 5.5+ years of SAP R/3 experience in ABAP Programming in the functional areas of MM, SD, PP, PM, FI & Payroll.

Proficient in physical and wet chemistry analyses using gravimetric, titrimetric, and spectrophotometric techniques. Computer Software knowledge in HYSYS,MAPLE, ASPEN, HP Chemstation, Microsoft Office, Microsoft NT.

Petroleum Engineer with 6+ years of experience in the Oil & Gas Industry. Specifically in Middle/Heavy Oil. Strong Knowledge in Production Asset Management, ESP and Gas lift Design and Operations, Horizontal and conventional wells, Cyclic Steam Injection and New Technologies for E&P Industry.

Certificates in H2S Alive, W.H.M.I.S., and class 5 airbrakes. Work history includes warehouse work, shipping and receiving, loading and unloading trucks, driving forklifts and pallet drivers, and customer service

Post Applied Document Controller

Main job is Seismic Processing Analyst The main Projects 2D, 3D (land &marine), AVO All Projects works include; pre-stack processing, post-stack Processing ,and migration(PSTM_some Projects) ,Velocity Analysis AND build modules , finalizing these projects by writing the processing reports

Geologist looking for employment in the Oil Industry

Training for Entry Position for Oil and Gas Industry (Floorman), Engineer Degree for Fisheries, Experience working for Major Projects and at the Sea, ourdoors and long hours

I am full confident about the any job of analyzer/instrumenation for detail see my resume

Good research aptitudes intellectual, potential and creativity.

Mechanical Designer Engineer

Profesional Employer with International acknowledge Certification

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

A Health, Safety & Environment (HSE) Professional with more than 12 years of extensive working experience in Oil & Gas Onshore & Offshore Project, LNG Construction, Commissioning & Start Up.

Senior Instrumentation and Controls Technician

Shaped Charge Engineer

I’ve been working in overseas since 1995 with experience on EPC (oil/gas/petrochem/power/desalination plant, etc.), piping field engineering and construction management/supervision (coordinator, construction, turnaround, tie-ins, revamp/maintenance, field engineering, punch list, test pack, spool ch

Instrument supervisor / technician v exp construction commissioning start up HSE

I have 30+ years experience as a Mud Engineer, 18 years International experience. I have held positions as Country Manager, Ops. Manager, District Coordinator and Fluids Coordinator. I am experienced in all types of Water/Oil/Synthetic based fluids, Silods control and waste disposal.

Navigational skills, Stability, Mangement

Obtain above position in fast growing IT organization offering challenge, responsibility and advancement opportunities while utilizing my best skills in System administration

Bachelor of Agriculture Science (Honors): 1995-1998 Major in Economics U of A, Excellent communication, trouble shooting skills and professional knowledge gained through interaction with public and running own business for the past 3 years.

EDUCATIONAL QUALIFICATION:DIPLOMA IN CHEMICAL ENGINEERING,job at present: SOHAR REFINERY COMPANY LLC, SOHAR, MUSCUT, OMAN,and actively involved in precommissioning and commissioinig activities.i have total 11+yrs of experience in refinery/petrochemical industries.

Electrical Resistivity geophysical investigation (ABEM Terrameter SAS-300), Topographic Survey (SOKKIA SET 5F), Global Positioning System (GARMIN), GIS

Autocad & Inventor Draftsman

I am an instrumantation and control system designer working with FLOUR INDIA , I am a Diploma holder in Electronics engineering , my working exprience is 03 year

Application for QA/QC Inspector job (Ready to work Offshore)

A Well Services company manager with almost 30 years of industry experience; my background includes working in the oilfield service sector with numerous postings in Canada, Russia, China, and New Zealand. Working with teams of talented people to achieve exceptional results is foremost on my list of

Effective knowledge and working with Microsoft windows based software like MS Office (word, Excel, PowerPoint) as well as in AutoCAD.

Management consulting professional with global consulting experience. Proven track record in executing strategy and operations consulting assignments. MBA, CFA Level II Candidate

I have experience on land drilling rigs and would like to obtain an offshore position.

I have completed a 2 year diploma program in electrical engineering technology. I graduated with honours because of my hard working and dedicated attitude.

Petroleum Landman and Abstractor.

Camp Attendant / General Help/ Administration

I am diploma marine engineer Working in Amsa Total solutions Pvt Ltd., as Quality Control for the past three years. I have completed AWS-Certified welding inspector. I have also completed SMAW -4G Welding course. I'm dedicated & highly motivated to accept challenges & pursue perfection in work

A skilled technical professional with influential leadership and management skills. Proven ability to work in the office and work in the field.

B.E. Petroleum, Working in Workover Department

Exploration, Development, Workover, Deviated Well Drilling Supervisor

I'm a Registered Electrical Engineer and experienced Safety Officer for more than 10 years. Presently am working with a US based Drilling Company as Offshore Rig Based Safety Officer in Saudi for their offshore project. I hope with my experience and initiative, I would be able to contribute positive

Professional Geologist with petroleum exploration and hydrogeological environmental experience

Project Manager, Mechanical Engineer with 20 years experience in Gas Turbine Industry

To seek a position that maximizes my knowledge and technical expertise in the field of Petroleum Engineering & technology, Electronic mechanic, Computer system application, electronic device assembly and trouble-shooting, Design & process engineering.

Offshore Field Engineer with 2 years experiance in shypyard and 3 years onshore/offshore.

Degreed Petroleum Engineer, Production, Workover, Completion, Planning, Programming, Procedure Writing, over 20 years hands-on experience, Field Supervision, Mentoring Local Staff, Excellent Communication and Human Skills, Good Overseas exposure, Adaptable to most current software and applications.

Piping design engineer having 4 experience in ,PDS,CADWORX 2008 AUTOCAD 2008.

Power Engineer 3rd class

run excavator for 7 years also ticketed to run Dozer,Graders,Loaders,Articulated Rock Trucks,Class 1 Drivers Licence and all oilfield tickets

Experience in oilfield constrution including Saftey training filling out required permits for hot work and confiend space as well as bolt up and tank work. Very familiar in all aspects of running flow lines, gas and oil headers systems and maitanence of wells. Great work attitude

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 [ 136 ] 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out