Resume - Instrument technician

Misco Jobs

Resume #84371

CONTACT INFORMATION:
View contact information...

Seeking senior level managerial assignments in Project Management/ Instrumentation & Control/ Installation & Commissioning with an organisation of repute.

Professional Overview
 A dynamic professional with 15 years of rich & extensive experience in Project Operations, Instrumentation & Automation, Installation & Commissioning.
 Last working with babcock borsing service as Instrument supervisor.
 Gained comprehensive experience in refinery, petrochemical and gas (H¬2S plant) as instrument technician, senior technician maintenance, construction commissioning and shutdown.
 Experienced in maintenance / operations of a wide spectrum of equipments and components.
 Adept at preventive and breakdown maintenance as well as identifying & adopting new techniques of maintenance like proactive maintenance, REAP (Risk Evaluation and Prioritising), condition based maintenance, etc.
 Skilled in executing projects in compliance to the quality standards.
 A keen communicator with honed problem solving and analytical abilities.
 Efficient in improving efficiency of automation & control using available resources & by installing suitable instruments as per requirement.

Proficiency Forte

Project Management
 Preparing project schedules / plans, engineering designs / drawings and technical specifications as per clients' requirements, process flow and P&I diagrams.
 Planning, scoping, estimation, tracking & implementation of project plans within preset budgets and deadlines and coordinating projects for the set up facilities
 Effective resource planning for optimising man & machine utilisation, reducing wastes for enhancing productivity and profitability.

Instrumentation & Control
 Detailed engineering, system engineering, instrument sizing, and preparation of instrument data sheets, specifications, layouts, loop drawings & logic diagrams.
 Maintaining, modifying & developing logic programs & mimic screen on scada platform & transferring data from different platforms through PLC, etc.
 Preparing drawings & documents required for implementing SCADA related jobs.
 Reviewing design and documents prepared by the respective Design Engineers and conducting verification of drawings and documents done by the design engineers.

Erection and Commissioning
 Managing overall activities pertaining to installation and commissioning of wide range of automated plants for all giant industries in India.
 Supervising commissioning activities viz. simulation and loop checking of various instruments; in adherence to the company's standards and specifications.
 Conducting inspection, pre-commissioning and functional testing to ensure the performance capacity of various machines and equipments.
 Managing erection/ commissioning of process control equipments for smooth operations.
Operations & Maintenance
 Planning and effecting preventive maintenance schedules of various machineries and instruments to increase machine up time and equipment reliability.
 Identifying areas of obstruction / breakdowns and taking steps to rectify the equipments through application of troubleshooting tools; upgrading of the obsolete machines.
 Executing cost saving and energy saving techniques/measures and modifications to achieve substantial reduction in O&M expenditures and work within the budget.

Organisational Experience
March'2009-may2009 with Babcock Borsing Service, Oman As an Instrument supervisor
Refurbishment of Babcock Boiler # 6 for Al Ghubrah Power & Desalination Co. OMAN

 Disciplines and physical checking work out the job plan for example cable laying, junction box installation, cable tray installation etc.
 Allocate resource for timely completion of the work activities as have been planned.
 Supervise the daily work activities to ensure that work is completed on time with all quality and safety requirements met as per procedure.

Jul'08 – Oct'08 with AL Ganim Sepam, Kuwait as Instrument Foreman
Construction for Equate 2 Project

 Implementing efforts towards installing process instruments like pressure transmitter, level transmitter (capillary type) & temperature transmitter.
 Performing loop checking, troubleshooting & calibration.

Feb'08 – Apr'08 with Qcon (Qatar Engineering & Construction Company) Qatar as Instrument Technician

 Handling shutdown for QChem (Qatar Chemicals).
 Working for system maintenance.
 Performing loop checking, troubleshooting & calibration.

Sep'07 – Dec'07 with Sepam, Nigeria as Senior Instrument Technician
Commissioning of Nlng Plant; Worked for TSKJ. (Technip, Snamprogetti, Kelloge Brown & Root, Japenees Gasoline Corporation

 Performing loop checking, troubleshooting for process inst. like control valve, transmetter (flow,temp pressure, level) and F&G instrument Like smoke detector, flame detector, H2S detector, safety shower, alarm system and function check

Oct'06 – Aug'07 with Kentech, Kazakhstan, Russia as Senior Instrument Technician
Project of Tengizchevroil (TCO); Parsons Flour Daniel (PFD) Oil Gas; H2S Plant Commissioning

 Working for Kentech (Ireland) for TCO & PFD, SGI/SGP project.
 Handling shoot process, F&G, PA system.
 Performing instruments looping and troubleshooting with client of TCO&PFD using HART 375 for smart instrument like a smart transmitters, smart control valve, radar level transmitter (Vega) displacer level transmitter etc. & commissioning.

Accomplishments
 Gained familiarity with Honeywell (TPS) Total Plant Solution and ICS ESD/ F&G instrument like smoke detector, flame detector, H2S detector, safety shower & alarm system.

May'06 – Sep'06 with Neo Structo, Surat as Senior Instrument Technician / Supervisor
Gujarat Refinery (IOCL) CCR Project

 Installing as par P&ID I installed transmitter, control valve, Level troll, on /off valve.
 Calibrating control valve, on/off valve & transmitter with Hart 375 for smart instrument.
 Loop checking & trouble shooting.
 Worked with Yokogawa System, Don F&G loop.

Feb'06 – Apr'06 with Kharafi National, Kuwait as Instrument Technician

 Handling shutdown for petrochemical plant.
 Implementing efforts towards calibration and maintenance of transmitter, control valve, etc.

May'05 – Nov'05 with Hyundai Engineering & Const. Co. Ltd., Libya Instrument Technician
Commissioning for Western Libya Gas Project Millitah Plant in Libya

 Working in assistance of company Eni Gas (Italian company which is urope's biggest gas plant maker).
 Executing efforts with Snam Progetti lummus Gas Ltd. for commissioning NC41 Mellithas plant project under Hyundai Engineering & Construction co. Ltd.
 Commissioning check logic for process, F&G IRP; hooting was a ABB tenor system.
 Using Hart model 375.

Sep'04 – May'05 with Sejong Corporation, Libya, as Instrument Technician
Pre-commissioning for Western Libya Gas Project for Millitah Plant in Libya

 Cabletresing, cable scriping dressing & con- action system.
 Executing the cable pulling system cabinet to marshaling cabinet and connection pull serial Link RS 485 marshalling cabinet and line.
 Checking:
- Field to control room work as a DCS Operator for loop.
- Process F&G & IRP by consowal.

Apr'04 –June'04 with Costain Abu Dhabi Company W.L.L,ADGAS UAE as Instrument Technician

 Handling calibration & maintenance of all type instrument like transmitter switches control valve.

Oct'98 – Oct'04 with Jasubhai Engineering Ltd., Baroda as Instrument Technician
(IOCL & IPCL)
 Maintenance of field instrument. Like on-off valve, control valve, transmitter pressure, flow, temperature
Level, also switches,
 Trouble shooting of field instrument..
 Work with smart instrument.
Nov'97 – Aug'98 with Khalifa Al Daij Al-Dabbous & Brothers Co. Ltd., Kuwait as Instrument W/S Technician

 Implementing responsibility for maintenance for K.O.C whereby handling:
- Maintenance of field instrument oil well head like pressure switches double diaphragm control valves solar panel for power backup charges.

Nov'96 – Jul'97 with Techno Concepts (Consultants Instrument Systems a high technology company),Baroda as Insturument Technician
 Commissioning and loop checking of instruments.
 Loop checking and commissioning of all types of transmitter switches control valves and calibration.

Dec'95 – Oct'96 with Found Abdullah Found Co. Ltd., Dammam, K.S.A
as Instrument Technician

 Executing for hot switch over for Saudi Armco (Gas plant).
 Performing hot switch over in Saudi Armco Gas Plant was replace old electronic instrument.
 Installing new Foxboro I/A series instruments And control panel loop checking and calibration.

Oct'94 – Nov'95 with To Pack Industries (I) Ltd.,Baroda as Instrument Technician

 Electronic troubleshooting and check up of wending machine.
 Fault finding timer circuit level circuit and soldering.

Aug'93 – Sep'94 with Techno Concepts; Consultants Instrument Systems, Baroda as Instrument Technician

 Executing maintenance related activities for Indian petrochemical Co Ltd.(I.P.C.L).
 Carrying out daily routine check up of field instrument and C/R instrument.
 Undertaking maintenance and calibration of transmitter, pressure, level, temperature and flow control valve, on-off valve.

Technical Know-how
Programming Languages: Basic
Application Systems: Microsoft Office
Operating Systems: Windows XP/ 2000/98/95

Academic Credentials
 I.T.I (Industrial Training Institute)The trade of Instrument Mechanic 1991
 Diploma in Instrumentation & Control from D N Polytechnic, Ahmadabad, 1993

Personal Dossier
Date of Birth: 1st July, 1970
Nationality: Indian

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 10917)

Go to Search Parameters...

Brief Description

CORE COMPETENCE Rock Eval, Vitrinite Reflectance, GC, GCMS and other analytical techniques. Drilling Fluid. Database applications. Writing codes in VB6, C, and VBA. Management concepts in Human resource Planning.

I worked on structural geology, stratigraphy & development/exploration geology. I worked on exploration leads, evaluated plays, performed economic analysis of prospects. I was involved in discovery of 12 billion STB heavy oil and 10 billion STB light oil in Kuwait.

A petroleum engineer by profession and a graduate of Colorado School of Mines with worldwide experience of over 25 years in reservoir and petroleum engineering. Versatile and multilingual. Available to work on single status on contractual terms or permanent.

Chemical engineer with extensive experience in oil & gas, industry and contracting fields. Worked in the Arab Gulf region and Lebanon.

SUMMARY OF QUALIFICATIONS Twenty five years domestic and international experience in Prime Contracts and Subcontracts Management & Administration and Pricing involving all aspects of the procurement cycle.

A senior engineer with over 20 years experience seeks a permanent challenging and fulfilling role within the oil, gas or petrochemical industry in the US.

Highly motivated, resourceful and results-oriented professional with American and International experience in environmental projects, drilling and the exploration of oil fields, gas and mineral deposits.

Petroleum Engineer with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology and application of new technology for onshore/offshore rigs and office operations in Drilling, Completions, Testing and Workover of vertical, directional, multilateral and hor

Exploration geophysicist with 26 years experience in both exploration and development prospect generation. Major strength in 2D, 3D depth imaging, seismic interpretation, integration, and team management. Excellent communication and presentation skills.

MBA marketing and Electrical Engineer

Drilling fluids engineer. 17 years experience in drilling and drilling fluids, Familiar with all mud systems, tendering, mud programs and waste management. Sales engineer. Computer literate.

Class 2 Mate unlimited IFO 10353

Lead Piping Engineer, Procurement Engineer, Engineering Coordinator, Pipe Stress Analysis

I have 12 years of experince in Instrumntation engineering. I have worked in oil and gas fields, Engineering consultancy, Power plant and etc.

Project Mechanical-Piping Engineer

An engineer technical assistant with progressive experience, working in Environment and Reclamation, Production and Operations, as well as Drilling departments.

Production supervisor

Manager (Production and Reservoir engineering, subsurface studies)

Motor Rewind Techinician

Education/ University/Year : Bachelor of Engineer in Mechanical Engineering (B.E.,) / University of Madras-1994 Professional Qualifications: ASNT Level II in UT, RT, MPT & PT Training Undergone: H2S and B.A training at, Qatar petroleum, HUET (Helicopter under water escape training) at Ventur

15 years autocad experience, off shore platform design, mechanical design, machinery design, civil drawing experience, Senior Designer, Group Lead.

Maintenance Planner/Schedule with 17+ years of work experience out of which 14+ years in Oil&Gas, Petrochemical, Refinery and Fertilizer Industry Maintenance and Maintenance Planning activities. Good working knowledge of Planning&Scheduling, Reporting, SAP-PM, Primavera 6.1 etc.

Available 2nd Engineer -UK CoC Unlimited ,Offshore DP Vessel

I am a successful, experienced and qualified Commissioning Start up Specialist Engineer, Commissioning Engineer, Production Supt-Supervisor, Shutdown Coordinator with over 18 years extensive experience (both onshore and offshore) within the oil, gas & petrochemical industry.

Instrument technician

Petroleum engineer,involve in drilling activity and post exploration - exploitation. willing to work any place in the world (no exception), ready to start working asap.

2D/3D seismic interpretation for structural and stratigraphic plays in the areas of both compressional and extensional tectonics, seismic attributes on 3D volume, AVO modelling and integration of acoustic impedance inversion.

Experienced Mechanical Technician,well verse vibration and industrial equipment balancing ,knows o/h of all types of pumps and compressors.

Electrical Engineer, Engineering.Construction and commissioning of offshore oil & gas facilities

Electrical Engineer with over 13 years diverse experience in managing medium scale of new & revamp projects. Proficient in design reviews, electrical equipment selection, installation & construction, monitoring, commissioning, testing and maintenance of electrical equipment.

Petroleum engineer with more than 8 year experience as System analyst, familliar with Oil/Gas production system (Scada, Historian) and SAP R/3

Senior Structural Engineer with 13 years experience - Offshore with SACS & StruCAD*3D, Onshore (refinery) with STAAD.Pro

SCADA and Automation and I&C Engineer

Mechanical Engineer with18 years experience to projects/plant maintenance (rotating/static equipment)in Oil & Gas-7 years, chemical/petrochemical-8 years and food process-utilities maint.-3 years.

(PRODUCTION MANAGER)

I am an Instrumentation Engineer, having 15.5 years of experience in the field of instrumentation from Project execution to maintenance in Refinery and Petrochemical Industries. Having work experience in SAP R/3 plant maintenance module (PM) to carry out day to day maintenance.

Seeking an entry position in Management Consulting. Can leverage diverse skills in Engineering, Management and Business. Interests in productivity/process improvement and culture change management.

Energy industry economist and manager with broad experience in both the private and public sectors covering exploration & production, refining & marketing, transportation, utilities, public policy and regulation.

Team Oriented Land Drilling, Production and Management Professional

I have 15 years experience in Oil and Gas Industries as Electrical Maintenance supervisor, 5 years an Electrical Commissioning Supervisor, 5 years in Electrical construction and hook up and 5 years at the Electrical Workshop.

11+ years experience (10 years with Landmark, 1+ years with Schlumberger) as G&G consultant worked on OpenWorks, GeoFrame, Petrel suite of applications. Currently working with Schlumberger helping clients in Petrel and GeoFrame workflows, presenting new features & updates, Petrel Testing & Training

Experienced in gas lift design, well optimization, nodal analysis, well integrity, surveillance techniques, trouble shooting, water shut-off, formation damage evaluation and treatment, interpretation of production logging , PVT & multiphase flow, water injection project, and witness rigless operati

Engineering Manager, Project Manager, Engineering Specialist

Actively seeking a position in „o PROJECT ENGINEER „o With an organization needing a professional demonstrating ability in providing consistent, cost effective methods improving quality of products while meeting best engineering practices

1. Oil and gas EPC experience for four years. 2. Design and engineering of static equipment. 3. 10 plus years' experience in mining industry. 4. Expertise in maintenance of static, rotating and utility systems. 5. Bachelor's degree in Mechanical Engineering and Master's degree in Maintenance Mgmt.

Chief Engineer STCW95 unlimited with Master's Degree. Experience on drillships, AHTS, tugs, etc. Ability to manage all engineering operations on board the drilling vessel to ensure proper operation and maintenance of propulsion machinery, drilling equipment and others whilst at sea and in port.

Project engineering and management, electrical and process engineering, project cost control and schedule, business development, power generation equipment, Russian speaking, technical translations, oil & gas, minerals and metals, FEED (front-end engineering design)

A qualified and experienced valves, piping and vessels engineer who is looking to return to mainstream engineering applications ideally as a contractor working overseas. Knowledgeable in the design and manufacturing of pressure vessels and pipework as well as valves/controls used in pressurised

A dynamic professional with more than 24 years of rich experience in Marketing, Sales, Business Development, Planning, Procurement, Process improvement, Manufacturing and Man Management.

Instrument and Control Systems Engineer, WorleyParsons, Qatar

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out