Resume - I have done D.A.E. (Diploma of Associate Engineer). My experience is more then 4...

Misco Jobs

Resume #84544

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE:

To contribute towards the growth & development of an organization that offers learning opportunities and professional environment.

ACADEMIC QUALIFICATION:

* 3 years Diploma of Associate Engineer Electrical Technology from P.B.T.E Lahore 2001 to 2004.
* Matriculation with science from B.I.S.E. Bahawalpur in 2000.

PRESENT RESPONSIBILITIES:

I've been doing my present job as an Electrical Technician in Fatima Fertilizer company ltd since 25th February 2008.

Two years Apprenticeship training from Engro Chemical Pakistan ltd from 14th Nov 2005 to 13th Nov 2007.

One year working as Electrical Technician in Engro Chemical Pakistan from Dec 01, 2004 To Nov 02, 2005.

* Experience In maintenance and troubleshooting of electrical equipments.
* Good knowledge of hazards & area classification and required safety practices associated with urea fertilizer complex.
* Well-Versed with use of Maximo based CMMS for routine PM&Turnaround maintenance & inventory management.
* Ability To Adapt & Adjust In New Systems.

PROFESSIONAL TRAINING:

* Electrical safety fundamental by DuPont PSRM (Process Safety & Risk Management) + PSM (Personnel Safety Management).
* Training of 6-sigma quality management system.
* P.P.E (personnel protective equipment).
* Maximo based CMMS.
* Electrical 'Area classification'.
* Work permit procedure.
* First aid training.
* Plant safety.
KEY ACHIEVEMENTS:

* Installation fire alarm systems based on Human friendly Inergen™ gas. Make: Thorn, UK.
* Refurbishment of old panels of motor control center and power center.
* Termination of M.V cable.

WORK & EXPERIENCE:

Electrical maintenance, troubleshooting & Up-keeping of Ammonia, Urea & Utility plants. To suggest and implement modifications for the improvement of plant operation. Knowledgeable about Maximo based CMMS.

EXPERIENCE:
(More Then 04 years)

MV and LV SWITCH GEAR:

Preventive maintenance and inspection of C.Bs. complete overhauling, maintenance and testing rack in rack out procedures of circuit breakers.

* 6.6KV Air Circuit Breaker (GE & Siemens)
* Vacuum contactors up to 450A, 6.3kv.
* 6.6KV / 11KV Vacuum circuit breaker (Alstom & Siemens)
* 440V LV Switchgears with secondary selective system ACBs (Siemens /Alstom)
* 440V LV switchgears with ACBs (Siemens / Alstom).

Troubleshooting in substation at control circuit of 6.6 kv out going motor feeder cubicles at distribution panel with a firm hold over drawings and standards related to electrical network.
.
TRANSFORMERS UP TO 3500 KVA: ( ABB,SIEMENS)

Preventive maintenance, oil testing, oil treatment, installation, power cable termination, meggering, and overhauling including oil sampling for dielectric test and silica jell replacement, connection tightening, bushing seals and Buchhulz relay level glass replacement of 6.6KV / 440V & 6.6 / 11KV distribution transformers (Siemens / AEG)

LV MOTORS UP TO 250 KW:

Termination & connection troubleshooting, greasing, winding and complete overhauling in case of excessive vibration temperature, and abnormal sound of motors up to 250 kw made by ABB, GE, Siemens, Westinghouse.

VARIABLE FREQUENCY DRIVERS:

Familiarization with complete operation and trouble shooting of VFD`s of different companies such as ABB, MITSUBISHI, from fractional KW to 150KW.

STORAGE BATTERIES:

Voltage analysis during charging and discharging, electrolyte sampling for specific gravity and level make up of lead acid, and nickel cadmium battery banks up to 240Ah made by SAFT.

 FIRE ALARM SYSTEMS:
Trouble shooting and maintenance of multi zone fire alarm systems with automatic fire suppression system (based on human friendly Inergen™ gas), make: Thorn, UK

UPS and DCP:
Familiarization with operation of 380V, 80 kva UPS.Familiarization of operation and working of DCP (Direct current panel) providing 110 volts DC for control of whole switchgear and protection system.

ROUTINE JOBS DURING TRAINING:

Installation of simple and explosion proof lighting schemes as per site requirement. Troubleshooting of tripping faults of lighting and portable power appliances in field. Carbon brushes replacement of 18.5MW generator.

CABLES JOBS:
* Testing, gladding, connections and lying of cables up to 400 mm according to cable schedule.
* Proper termination, jointing & punching of M.V & L.V Cable.
Working experience on following equipments:

* 7.2 KV / 800A current limiting reactors.
Alstom: Micom motor & feeder management Relays P241, P122.
* Siemens Simatic S7 PLC based automatic bagged Urea loading & palletizing system, AUTOPAC. (Beumer Germany).
* Troubleshooting of electrical interlocking of conveyer belts.
* Emergency power network with "DG Sets" & "AMF" System.
* Preventive maintenance of diesel generators, battery chargers (SAFT) & batteries (Lead Acid & Ni Cd)
* Cathodic protection system (Impressed current)
* Overhead crane 20 ton & Movs.

USE OF MEASURING AND TEST EQUIPMENT:
Uses of measuring and test equipment such as megger up to 5kv, earth resistance tester, digital multimeter, Primary current Injector, oil tester Use of oil treatment machine, phase sequence meter, motor rotation tester etc.

COMPUTER SKILL:
Ms dos, Ms Word, Ms excel, Internet and familiar with AutoCAD.

PERSONAL DATA:
Date of Birth 06 - 12 - 1983
Martial Status Single
Nationality Pakistani.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6101 to 6150 of 10902)

Go to Search Parameters...

Brief Description

Field oriented structural geologist; Highly adept at working both alone and as part of a team; Strong analytical thinking; Technical writing and speaking; Multi-lingual; Eligible for Professional Registration; Willing to travel

Good technical skills, Like to work with computers, Internet, Driving license category B.

6+ Years of experience in all aspects of Technical and Development my skills and abilities in the any Industry that offers Professional growth while being resourceful, innovative and flexible.

expirience in hydraulic fluid connectors

20 years experience in accounts & administration with reputed organisations like Trading, FMCG, Manufacturing, Oil Industry

PhD, CFD, Fortran, Matlab, C++, Fluent, Gambit, Tecplot, AutoCAD, ArcGIS

Automotive Service Technician (Mechanic

WITH profil of graduted technician in electromecanichs and an hight experience in petrochimical industry

Chem Analyst - Laboratory Technician

I have done D.A.E. (Diploma of Associate Engineer). My experience is more then 4 years at fertilizer plant. I am currently working in Fatima Fertilizer Company. I have gained hand on experience of Maintenance, Troubleshooting and Installation of the plant. I am fully aware of the

using AUTOCAD

Working as a welding engineer from last 2 years.having background of metallurgy.

Working as Petroleum Engineer since 17 years. Engineer, Supervisor and Manager roles in drilling, wellcompletion, production and workover operations in oil and gas E& P .

Bachelor Degree in commerce

Experienced oil and gas operations manager with proven record of production optimization, safety and personnel development. Experience in pipelines, gathering, compression, NGL, amine, automation, shale as well as conventional oil and gas operations including drilling, completions and workovers.

I am presently working as Manager - Operations (Process) with IndianOil Petronas for their 6.0 lakh TPA LPG Import/Export Terminal at Haldia, India. I have over 20 years of experience in the construction, commissioning & operations of LPG Filling Plants & Cryogenic LPG Terminals.

I am presently working as Manager (Mechanical) with Engineers India Limited an ISO 9001 CONSULTANCY ENTERPRISE of Govenment of India & supervising on behalf of owner all piping and equipments installations in PTA - project of Indian Oil Corporation at Panipat Haryana India.

DP Technician/ ETO/ DP Operator

PDS, Piping Designer, Smart Plant Review, AutoCadd, PDMS

Type 65 wpm, Microsoft Excel, Microsoft Word, QuickBooks Enterprise, PowerPoint, Delorme XMap, excellent phone skills, highly organized work habits, accounts receivables, accounts payables, reconciliations, volume discrepancies, allocations, etc.

I study physics electronics teschnology and i measured 2:1. I am good in computer assembly and installation, microsoft ms, excel, powerpoint

I am an enthusiastic dedicated person. I have the ability to work alone or in a team environment to complete any given task with utmost care and competency. Ensuring that all tasks are properly planned, to achieve the highest level of safety as so the tasks can be execute incident free

Strong communication skills, strong HSE knwoledge

A computer literate and good skill in practical weldind

- Exceptional Learning Ability - Excellent Communication skills - Eclectic Reading - Striking ability to absorb information - Good Interpersonal relations - Ability to perform under pressure - Ability to work as part of a team - Ability to meet deadlines - Self – motivated - Goal - Driven - R

Recent mechanical engineering graduate searching for employment as an EIT.

Mechnical engineer

Young and Dynamic candidate seeking career within Oil and Gas or Petrochemical Company with relevance to Chemical Engineering Background. Excellent common-sense and decision making abilities. Self motivated, hardworking individual also strong team spirit and willing to travel.

Entry-level candidate

Time served Mechanical fitter with 20+years experience on a variety of petro-chem processes.DCS control room operator. PPO2 in processv technology. Nvq3 in mechanical fitting.

Have knowledge in Protocols like MODBUS, 101, 103, 104, RP570 and in micro scada,Have worked in debugging and testing of protocol converters and interface converters. Have worked with fiber optic converters, RS232 and RS485 communication cables,Have also worked in PMS (Power management system)

Experienced in autocad ,microstation and manual drafting. 32 years in civil and structural design

Over five years of Mechanical Engineering experience in various organizations in US. * Highly proficient in development, design and analysis of Energy systems like Industrial Gas Turbine, Aero derivative Gas turbines, Fuel Cell Systems.

Project oriented, cost cutting manufacturing professional with 15 years of progressive experience in Procurement, Materials Management and Project Management. Specializing in Supply Chain management to include outside processing. Completed APICS certification courses in 2002. Passport obtained in

PIPING DESIGNER/DRAFTSMAN(PDS/PELICONFORGE/SPR/CAD/MICRSTATION)

MA(ECONOMICS), PGDCA, HEALTH & SAFETY MANAGEMENT DIPLOMA, FIRE AND SAFETY MANAGEMENT DIPLOMA, FIRST AID DIPLOMA, CONSTRUCTION SAFETY CERTIFICATE, COSHH CERTIFICATE, SAFETY MANAGEMENT CERTIFICATE, OHSAS-18001-1999 HEALTH AND SAFETY INTERNAL AUDIT, ENVIRONMENT AWARENESS CERTIFICATE, MANUAL HANDLING CE

Instrument and control technician

looking for mechanical/welding inspector position

Educational Qualification: Passed Diploma in Software – June 1999 Diploma in CAD - March 1991 Diploma in Piping D’man – June 1987 Diploma in ITI D’man (Mech) – January 1987 Plant Designing Management System (PDMS) Ver.11.5

Based on my experience for 15 years working in the Planning and Scheduling with different company and different style of Management also with various type of EPCIC Project I did involved in like Building Constructions, Petrochemical Plant, Offshore Platform (Hook Up and Commissioning) and Turnaround

Diploma of Associate Engineer (Electrical) Working in boc gases as E&I shift engineer.

-6 years experience in Pipeline, Environmental and GIS Project

-Seeking a challenging position in the Mechanical Engineering field especially in the oil and gas. -Solid engineering experience including maintenance, design, manufacturing and oil and gas experience -Bachelor Degree in Mechanical Engineering The University of Reading, England. UK

After having mainly matured experiences in the management and maintenance of computer and telecommunication structures of the Company where I worked until last December, now I wish to do new experiences and to develop the old ones in a stimulating and interesting environment.

Chemical Engineer with 6 years experience in Drilling, Pipeline Operation, Construction, Economic Modelling, Health, Safety and Environment, together with Sustainable Development and Issues Management. 6 languages and American Citizenship, would like to work in Houston, Texas.

DCS, PLC Programer, Instrumentation Commissioning Engineer

A fully seasoned Maintenance manager with 9 years of industry experience. Excellent ability in planning and develop methods and procedures for testing (FAT) as well as commissioning of DCS systems. Highly skilled in programming of DCS/PLC systems in controller languages.

To secure a position as an Instrument & Electrical Technician.

Versatile, multi-disciplinary, innovative and excellent track record in 15 years working experience including 13 years in Oil and Gas Logistics, Material and Procurement positions which offers eventual advancement into Finance Management looking for Logistics/Material/Procurement Managerial level.

Mechanical Engineer for “construction of piping, hydrostatic test &material control“

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 [ 123 ] 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out