Resume - Over 30 years of permanent and contract positions in design, operation, construc...

Misco Jobs

Resume #84696

CONTACT INFORMATION:
View contact information...

DISCIPLINE: Instrumentation (Design & Construction)

DATE OF BIRTH: December 17, 1956

PLACE OF BIRTH: Glasgow, Scotland

PASSPORTS HELD: British & Canadian

WORK EXPERIENCE: Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East.

COLLEGE EDUCATION: City & Guilds Electrical Technicians Parts 1, 2 and 3- (Full Tech)
Ordinary National Certificate - module credits for Digital Electronics, Analog Electronics, Electronic Components & Combinational Logic, Computer Software

C.A.D. SYSTEMS: Autocad - Versions 2000 & 2002
Autocad/Rebis Autoplant 3D Instrument Modelling
Intergraph Micro-Station Vers. 4, '95, J.
Cad Overlay
Documentum Drawing Management System

COMPUTER SOFTWARE: Microsoft – Word, Excel, Project.
Kenonics –' Flowel' Index Plus, Valve/Orifice Plate Sizing
SAP 4.6D Computerised Maintenance Management System
INTOOLS Instrument Database, Wiring & Loop Modules

COURSES: OPITO Offshore Safety Induction & Emergency Training (2004)
Speedtronic Mark II Calibration Procedures 1978-1982)
Fisher Control Valve Sizing & Application (1995)
Bailey "INFI-90" DCS 'Plant Operator ' Training Program (1996)
Foxboro I/A Transmitter Calibration & Set-up Procedures (1997)
Triconnex 'Tristation PLC Basic Programming (1997)

WORK EXPERIENCE

June 2005 SNC-Lavalin Engineers & Constructors
To Present Toronto, Ontario, Canada

Senior Instrumentation Designer (Staff Position)
Involved in P & ID updates, Instrument List, Specification Sheets, Technical Specifications, Quotation Inquiries, Technical Bid Evaluations, Equipment/Material Purchase Requisitions, Vendor Drawing/Calculation Checks for all field instrumentation. Involved in checking of installation/construction wiring & location drawings for 'Refinery' & 'Sulphuric Acid' plant projects & upgrades.

Construction Co-ordinator
Petro-Canada Plant Mississauga, Ont. (Site Assignment 2006)
Overseen field installation of new instruments by sub-contractor.
Imperial Oil Refinery, Nanticoke, Ont. (Site Assignment 2005-6)
Co-ordinated calibration, installation & loop checks of new instruments to existing Honeywell TDC3000 DCS. Assisted checkout of Validation Tank/Recovery skid (for Benke LLCGO FBP analyzer) and Fresh Feed Catalyst Slide Valve Hydraulic Power unit. (Blac Inc)

June 2004 Bantrel Inc.
To May 2005 Toronto, Ontario, Canada

Senior Instr. Designer/Construction Supervisor (Staff Position).
Detail design of installation details. Locating instruments in Rebis
3D Autoplant model. Updating Intools database for Suncor, Sarnia refinery project.
Sunoco Refinery, Philadelphia, U.S.A. (Site Assignment 2005)
Overseen field installation of new instruments by sub-contractor.

May 2003 AMEC (Upstream Oil & Gas Division)
To June 2004 Aberdeen, Scotland

Senior Instrumentation Designer (Contract Assignment).
Detail design of Instrument/Fire & Gas construction packs.
Performed offshore surveys for BP's Harding, Bruce and
Miller offshore platform upgrades.

June 2002 Granherne International. / Occidental Petroleum of Qatar
Until April 2003 Doha, Qatar

Senior Instrumentation Designer/Checker ( Staff Position )
Detail design & checking of construction job packs, performed offshore surveys, witnessed factory testing of hydraulic wellhead control panel modules, wellhead valves, for offshore wellhead platform 'Telemetry and SCADA Automation' upgrade project.

April 1998 Petro-Canada Products.
Until June 2002 Petro-Canada Refinery, Oakville, Ontario, Canada (Site Assignment)

Senior Instrumentation Designer (Contract Assignment )
Detail design/checking of electronic/pneumatic loops, wiring & location diagrams, installation details, B.O.M's.
Overseen construction & assisted 'hot switch-over' of Tank Farm Honeywell TPS DCS upgrade project.
Plant Operator – Hyrocarbon Treatment & Jet Merox Units.
Assisted refinery operators on a full time basis (6 months),

March 1997 Saudi SNC-Lavalin Co. / Saudi Aramco.
Until April 1998 Aramco Uthmaniyah Gas Plant, Saudi Arabia (Site Assignment)

Construction / Pre-Commissioning Engineer (Staff Position )
Co-ordinated inspection, calibration and field installation of new instruments by sub-contractor. Assisted co-ordination of 'hot' switchover to Foxboro I/A DCS and Triconex TMR ESD system.

November 1992 Stone & Webster Canada Inc/Petro-Canada Products.
Until March 1997 Petro-Canada Refinery, Oakville, Ontario, Canada (Site Assignment)

Senior Instrument Designer/Checker ( Staff Position )
Detail design/checking of electronic/pneumatic loops, wiring & location diagrams, installation details & B.O.M's.
Assisted in construction and 'hot switch-overs' of Plant No.
1 & 2 Honeywell TDC 3000 & Effluent Plant Bailey NET 90 DCS upgrade projects. Performed witness tests at vendor premises.

January 1992 Foster Wheeler Wood Group
Until October 1992 Aberdeen, Scotland

Senior Instrumentation Designer (Contract Assignment).
Detail design of Instrument/Fire & Gas jobpacks and offshore surveys for Chevron 'Ninian Southern' offshore rig upgrade.

May 1991 Brown & Root Ltd.
Until January 1992 Glasgow, Scotland

Senior Instrumentation Designer/Checker ( Contract Assignment)
Detail design/checking of loop diagrams and hook-ups for instrument/fire & gas systems for new BP 'Bruce' offshore rig.

November 1990 Petro-Canada Lubricants
Until May 1991 Mississauga Plant, Ontario, Canada (Site Assignment)

Senior Instrument Designer (Contract Assignment)
Detail design of construction packs for Control Room upgrade. Assisted construction/ pre-commissioning groups.

October 1989 Monenco Engineering Consultants Limited
Until October 1990 St. Catharines, Ontario, Canada
Senior Instrumentation Designer (Contract Assignment)
Detail design of P & I.D's, loop and wiring diagrams, installation details for DuPont chemical plant upgrade.

January 1987 Beecham Pharmaceuticals Ltd.
Until September 1989 Irvine Plant, Scotland (Site Assignment)
Senior Instrumentation Designer (Contract Assignment)
Detail design of construction packs. Assisted in construction and pre-commissioning of process/DCS upgrade projects.

May 1986 Foster Wheeler Energy Ltd.
Until January 1987 Glasgow, Scotland
Instrumentation Designer (Contract Assignment)
Detail design of construction packs for STATOIL
(Norway) new refinery project.

June 1985 Humphrey's & Glasgow Ltd.
Until May 1986 Glasgow, Scotland
Instrumentation Designer (Contract Assignment)
Detail design of construction packs for Beecham pharmaceutical plant.

January 1983 Vickers Systems Marine Consultants Inc.
Until May 1985 Ottawa, Ontario, Canada
Instrumentation & Control Specialist ( Staff Position )
Study/detail design of electrical and machinery control systems for naval marine, coastguard & offshore projects.

December 1978 John Brown Gas Turbines Ltd.
Until December 1982 Clydebank Plant, Dunbartonshire, Scotland
Quality Assurance Test Engineer ( Staff Position )
Performed calibration and assisted in inhouse inspection/testing of General Electric gas turbine electrical & instrument systems. Witnessed 'FATs' at vendor premises.

August 1977 Weir Pumps Ltd.
Until December 1978 Cathcart Plant, Glasgow, Scotland
Control & Instrumentation Designer ( Staff Position )
Detail design of pump packages for petro-chemical and power projects. Assisted in inhouse inspection and pre-commissioning.

August 1972 Yarrow Shipbuilders Ltd.
Until August 1977 Scotstoun Shipyard, Glasgow, Scotland
Electrical & Controls Technician/Draughtsman ( Staff Position )
Construction, pre-commissioning and design of electrical &
machinery control systems for new Royal Navy Warships.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7901 to 7950 of 10884)

Go to Search Parameters...

Brief Description

B Sc. Chemical engineering • Over 3 years experience including in process development

I'm petroleum and Gas Engineer in specilty Development and Exploitation of Oil & Gas fields,taking my degree from Kuban State Technical University Krasnodar Russian Federation in 1999.From this university done 1 year advance course in the same specialty

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

Knowledge Of Autocad, Pro-engineer, Catia, Unigraphics, Ideas

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

More than one and a half year of hands-on experience in Instrumentation and Project and Sales.

Control & Instrumentation Engineer with 5 year Exp in Detailed Engineering

I'm a geophysicist.

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Senior piping designer

Turbine tech.

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

It is my intention to secure a career in the field of Health and Safety on an oil/gas platform. However, since I am new to the industry, I will consider any position.

B. Eng. Petroleum & Gas Engineering University of Port Harcourt, Rivers State, Nigeria.

I can work floors, motors, and derricks.

I have a very strong back and am not affraid of hard work. I am very punctal

Geology, To be graduated.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

chemist, AUC english course, computer course, 2008 graduation

I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

Knowledge & exp. in Electrical and Instrumentation products, in PLC, SCADA and HMI systems, drives, field instruments, Allen Bradley - Micrologix, SLC, ControlLogix, Compact Logix, Flex Logix PLC’s, Panel View Panel view plus Families, in Controlnet, Devicenet, RSView32, RSView SE Redundant

Microcontroller Application, Interfaces Application - PLC (SCADAPACK,OMRON,GE Fanuc, etc), ADAM RTU,EXPERT Module,Flow Compute (OMNI,Sybertrol,AutoExec), Compact PLC (MOXA ioLogik)

Skills: semi skilled fitter & turner, horizontal boring mill, veritcal borer, central lathe, fitter, oilmaker, piefitter, milling machine. I will be finishing my N2 early March to be qualified.

I am very much interested in Oil Gas Exploration.

I've studied chemical Engineering. I passed some curses in drilling fluids, well log, zagros formation studies, and also water treatment

I am a female geologist who is currently doing my masters in geology. I finished from the University of Port harcourt, rivers state In Nigeria. I am a team player and still able to work independently with minimum supervision.

More than three (3) years experience in Mechanical Engineering in offshore/ onshore Oil and Gas Production.Application of Incident and Injury free approach in project, HAZOP study in project.

Chartered Accountant with three years experience in Oil and Gas Industry

I would like to work with a company that is well established and stable.. I enjoy working in the Oil & Gas Industry because of the people I have meet and worked with...I want to learn more about different aspects of the Industry and look forward to moving up with a good company.

8+ years in the field of Cost Analysis (Estimation & Cost Control Function) for Refineries, Petrochemical Complexes, Oil & Gas Pipelines / Terminals and Fertilizer Projects

I work at present servicing a fuel storage depot as a Maintenance Electrician, Leading Hand. I have 6 years experience of this type of work and many specialised qualifications in this area.

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

Mechanical engineer B.Tech. 6 yrs experience.(UAE) exp in dealing with contractors, sub contractors etc , contacts with major oil companies like adco,etc in UAE, excellent knowledge of UAE market .

can apply any job which you think I am fitting for

I am looking for a job in Oil Industry. I'm willing to "Hard work" and work with "Any entry level position" with your concern. I certainly would appreciate it very much if you could give me an opportunity in your company. I am confident of doing a good Job with your concern.

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

Chemical Process Engineer, Aspen Plus, HYSYS, MATLAB, CHEMCAD, Reviewing PFD, P&ID, Design Specifications

I m Final Year Student of Mechanical Engineer and will be pass out upto december 2006. I want utilize my knowledge and skills for an organization, which offers opportunities for personal growth and career development.

Icorr paint inspector/rope access technician

Experice engineer with project engineering and project managemnt

Mechanical Engineer

working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.

To continue employment in the field of oil & gas operations. I will bring dedication, good work ethics, and teamwork to your company.

Hard Working, faster to learn, Capable to working by individually or as a team and Capable to working in any different area

All qualifiations are posted on my resume exept that i have a passport.

First Prev 151 152 153 154 155 156 157 158 [ 159 ] 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out