Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #84794
next resume »»
CONTACT INFORMATION:
View contact information...
PERSONAL DETAILS
Date of Birth: - 19-10-70
Place of Birth: - Liverpool
Nationality: - British
EMPLOYMENT HISTORY
Jan '08 to date: - Foster Wheeler Energy / Warrington
Chadwick House
Birchwood Park
Warrington
JOB TITLE: - Piping Section Leader
Reporting to the Lead Piping Engineer, responsible for the following:
Processing / Maintaining Workshare scope plan
Co-ordinating Workshare piping design activities and ensure they are proceeding to the correct level of quality and to plan.
Assisting and deputising for the Lead Piping Engineer in planning, progress reporting, manpower loading and general administration activities.
Participating in design and checking work as required.
Ensuring Workshare interaction with other disciplines for all interfaces particularly Civil/Structural, Mat. Management, Project Engineering and Process.
Preparation, development and writing of Workshare Technical Work Practices, Standards and procedures.
Autoplant Administration for Workshare Projects
Also carried out the duties of a Senior AutoPlant Designer
Preparation of Plot Plans and layout of piping arrangements in accordance with FWEL corporate, national and international standards
Experience of the development of 3D Piping models using AutoCAD/PLANT.
Preparation and checking of piping deliverables
Review and check vendor documentation.
Participating in proposal activities, producing preliminary design sketches and assisting with man-hour and material estimates.
Site visits including competent use of measurement tools and recording.
Liaison with suppliers, vendors, contractors and clients.
Familiarity with CDM and PED.
_____________________________________________________________________
Jun '00 to Jan '08: - Foster Wheeler Energy / Shell Stanlow
Ellesmere Port
UK
JOB TITLE: - Senior Piping Designer
Combining Autoplant with site surveys/studies & LFM modeler system, worked on numerous plant re-vamps, both on chemicals and oils sides & a major multi million pound de-bottleneck project of the shop area, from front end through final detail design & construction phases, involving initial layout & designing of new C10 storage tanks & relevant piping, supports etc, also including piping design for both replacement & new columns, exchangers & pumps. Also greenfield major design of CD Hydro & HD Select plants, involving column, pump, compressor, vessel, rack layout & piping etc. Lead Piping Designer for Block 1 2006 Shutdown on HFA Unit project. Lead Piping Designer for multi-million pound Co2 Reductions Project.
_____________________________________________________________________
Feb '00 to Jun '00: - Rolls Royce Power Engineering (UK)
Liverpool
UK
JOB TITLE: - Piping/Mech. Designer
Using Autoplant 97, Mechanical Desktop & Autocad 2000 software, designing of Trent packages for Oil & Gas industry, including piping & relative steelwork including platforms & skid design.
_____________________________________________________________________
Jul '99 to Feb '00: - Rolls Royce Energy Systems (USA)
Ohio
USA
JOB TITLE: - Piping/Mech. Designer
Using Matra's Euclid & Plant Design Layout software, designing of gas compression packages for Oil & Gas industry, including Engine, Turbine
& Compressor services piping & structural steelwork including platforms & skid design.
_____________________________________________________________________
Nov 98 to Jul 99: - Dats Holdings
Widnes
Cheshire
JOB TITLE: - Piping Design Draughtsman
Using Autocad, sitework design & production of piping & supports, dealing with most aspects of typical chemical plant for Hays Chemicals
(Sulphuric acid plant),ie pumps,coolers,vessels,mixers etc. Also involved in the design & production of mainland gas pipeline arrangement for B.G.Transco.
_____________________________________________________________________
Feb '98 to Nov '98: - Kvaerner Oil & Gas
Oslo
Norway
JOB TITLE: - Piping/Support Designer
Using PDMS Structures & Piping modules in conjunction with Kvaerner Support Generator (SGEN), involved in the design & production of piping and relative supports including stress calc's using Kellog's stress package, liaison with stress engineers, dealt with all support functions including spring supports, blast conditions, hot & cold lines etc. on the Laminaria F.P.S.O & Åsgard B projects.
_____________________________________________________________________
Aug '97 - Feb '98: -Ruston Diesels Ltd
Newton Le Willows
Merseyside
JOB TITLE: -Piping Designer
Involved in production of piping layouts and details for marine diesel engine base service supplies, also some station piping. Working from first principles and using various standards i.e., BS4504, BS10 and BS1387. Using Computer Vision's microdraft Personal Designer CAD. _____________________________________________________________________
May '97 to August '97: - Jacobs Engineering (EIRE)
Mahon Ind. Est.
Blackrock
Cork
JOB TITLE: -Piping Designer
The job entailed both sitework & Autocad site work for pharmaceutical plants, SmithKline Beecham & Eli Lilly, including Tie-ins, Piping studies, Routing of new lines and their relative ISO's for the upgrade of the these plants.
_____________________________________________________________________
January '97 to May '97: -Cooper Rolls Inc (USA)
Mt.Vernon
Ohio
USA
JOB TITLE: -Piping Designer
Using Euclid C.A.D system, working on gas turbine/compressor designs, including lube oil, gas fuel, venting and instrumentation systems, also some steelwork and walkway platform designs.
Feb'96 to Jan '97: -Matra Marconi Space UK
Anchorage Road
Portsmouth
England
JOB TITLE: -Design Engineer
Using Euclid C.A.D system, working on the Hotbird series of Satellite Payloads. Involved in the Layout and Modelling of Equipment's, and the Design of Waveguide Networks and associated supports. Production of assembly drawings for manufacture.
_____________________________________________________________________
Nov '92 to Feb. '96: -Cooper Energy Services UK
Dunnings Bridge Road
Bootle
England
JOB TITLE: -Mechanical/Piping Designer
Job description entailed design work on gas generating and compressor systems for the onshore/offshore oil and gas industry. This included designing of pipework, support design, production of piping assemblies from first principles, structural and mechanical design both manually and using Euclid C.A.D, P & ID, Plant Design Layout software, Applicon Bravo C.A.D.
_____________________________________________________________________
Nov '88 to Nov '92: -Cooper Energy Services UK
JOB TITLE: -Apprentice Mechanical/Piping Designer
4 years based in the design office producing piping assembly/fabrication drawings, bills of materials, both manually and using C.A.D from first principles, workshop liaison. Office duties also involved full training on Applicon Bravo C.A.D system.
KEY SKILLS AND EXPERIENCE
* Experienced in piping/pipe supports, structural, fabrication and mechanical work for Oil & Gas Pharmaceutical & Chemical industries
* Accomplished design & draughting skills, both manually and using C.A.D.
* Experience gained with numerous C.A.D systems including AUTOPLANT, LFM MODELLER, PDMS, EUCLID, AUTOCAD, BRAVO 3, C.V Microdraft PD.
* Full 4 Year Mechanical/Piping Design Apprenticeship.
* H.N.C in Mechanical Engineering.
EDUCATION & TRAINING
Cooper Energy Services UK.
4 Year Mechanical/Piping Designer apprenticeship.
Euclid A.E.C. C.A.D. system: - 3D solid modelling, 2D draughting, Real Rendering, Plant Design Layout software, Materials Control software, P&ID software.
St.Helens College of Further Education
HNC Mechanical/Production Engineering Management
ONC Mechanical Engineering
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 1051 to 1100 of 10916)
Go to Search Parameters...
Brief Description
20+ Years experience in all aspects of Offshore Oil & Gas Exploration, Construction, Developement & Production. And Onshore Processing. Most recently in Safety & Environment sector.
Snr Completions Supervisor & Well Intervention Supervisor.
Lead Rotating Equipment Engineer / Lead Packaged Equipment Engineer / Condition Monitoring Senior Specialist
40+ years oil and gas drilling experience.
Drilling or Fluid consultant position
Chief Inspector for Pengrowth Corporation. 17+ years of experience in inspection in NDE, Plant enviroment and field. Certifications include CGSB UT II, MT II, API-510, Studying for National Board exam in December.
20+ years in drilling, production and construction in logistics, base management, contracts, purchasing, materials management, working knowledge in French and Spanish and willing to work internationally
valve Inspector,Maintenance Supervisor.Advisor, SME
Experienced Refractory Project Manager / Construction Manager / Consutant
Autocad, Autoplant, Navigator, Navis Explorer, Autoplant Administrator, GTX Rastercad, LFM Modeller/Server, All aspects of Pipe support design, Piping Design Section Leader, Piping codes and standards, MS Access and all windows based software, skilled in all aspects of Piping design & layout.
Piping superintendant with 35 years experience in the oil and gas industry
Operation and Management of Offshore Laboratory
Able to coordinate the entire QHSE aspects of offshore drilling work unit start up, drafting & facilitating training for all offshore personnel.
I have gained a wealth of knowledge in my twenty four years in the oilpatch. I was a contractor for seventeen years and a Construction Consultant ( coordinator) building roads and leases, Pipeline Inspector and Rig move Tranportation Logistics Coordinator.
I have over 25 years experience as a Project Manager in the Marine insustry
Twenty-Plus years experience in the design, development, commissioning and maintenance of Process, Batch and Material Handling Control Systems. Experienced in a variety of industries including Petro-Chem, Food, Power Generation, Offshore Production and Land based Drilling.
Boiler Service Manager
Extensive International offshore experience, with skills and qualifications in the fields of Well site supervision, OIM/Drilling and Wellbore Intervention. Strong focus on QHSE, Team work, Planing, execution and cultural awareness. Experience in both Development and Semi Exploration drilling.
Technician in mechanical engineering
With 15 years piping design and construction experience for onshore/offshore facilities, skidded process systems and topsides for clients such as Shell, Petrobras, MODEC, Petronas, BP, Saudi Aramco, Petrokemya, ExxonMobil, Mutineer & Exeter, CNOOC and Qatar Petroleum.
Rotating Equipment Engineeer with 15 yeras of Experience in Oil & Gas Sector
This is Esmaeil Rezaei from Iran and I have 37 Years old. I was graduated form Shiraz University with M.S. degree in chemical engineering. I have 12 years experience in petrochemical company in Shiraz city.
Experienced Sr Contracts Administrator
Subject: Application for the Post of Geologist
More than 15 years experience in proposal / tenders / bids, presently working in MNC with position of Proposal Team Leader. The company is providing QA/QC services to oil & gas industry. During the last decade I have been improved the present company’s business, with a budget target of 20M€
Experience in commissioning 5MW wartsila diesel engines, underwater mountable Thrusters, marine systems, meeting with owner and class surveyor, technical management of ships, operation and maintenance of marine systems
An Instrument & Electrical Inspector/Supervisor with 15 years of extensive experience in the field of Inspection, Engineering, Construction, Hook-up, Commissioning and Certification of various kinds of Plants such as Petrochemical Plant, Desalination Power Plant, Sewage Water Treatment Plant, Oil &
All level of catering , Laundry, Housekeeping, HSE and Quality
Senior Geologist & Petrophysicist with over 12 years of experience involved extensively in onshore and offshore oil/gas projects (domestic & international).
I am the highly and motivated person with 25 years experience in Petrochemical Company. Since Nov 15, 2002 to present, i am working in Qatar Fertilizer Company as Production Specialist. Previously i was working in Dow Chemical Co. with the last posisiton as Plant Operation and Safety Coordinator.
I am a graduate Mechanical Engineer with over 20 years Oil & Gas Refining industry experience, out of which about 10 years at a AMOCO fuels and lube refinery at India. I am currently working as the Mechanical Design Engineer for a prestigious mega refinery project (world¡¦s largest grassroots refine
Wellsite and Operations Geologist. Speciality correlation and positioning in 3 D using Seismic, logs or limited data
senior geologist
-Experience in O&G BU Management, technology as key driver. Surpassed goals while managing 80000 and 50000 bopd units. -Managed US 5.3 MMUS$/year technical services portfolio in most areas of O&G E&P, for all BU's of PDVSA and partners (Shell, Chevron, Conoco), 94% client satisfaction.
A qualified engineer with over 16 years of experience in production
"Rotating Equipment Engineering Specialist" with 17 years experience in refinery, gas plants, LNG plants and petrochemical plants for rotating equipment maintenance support, diagnostics, troubleshooting, reliability improvement and repair.
EM/MWD/LWD Gamma
I was assigned as Production Technologist for PETRONAS. My assignment mainly in Field Development Project whereby my job scopes are focusing on well &tubing design i.e. well completion design, artificial lift screening/selection & design, Sand prediction & sand control selection,
I am Expert on Reservoir Engineer, my capabiliity can cover whole petroleum engineering
Monitor and supervise partner organization's financial activities, monitor budget utilization, prepare multi-year budget for the organization and project. Conduct workshop/seminar for the partners on administration and financial management as per donors requirement, financial reporting & compliance.
SAP FICO / JVA
Over ten years of experience in the design, troubleshooting, maintenance and optimisation of new and existing facilities including sweet and sour natural gas plants, oil batteries, water injection, water treatment and chemical plants.
This letter is to express my interest for a Senior position in oil & gas Exploration. Based on my skills in Geology and oil and gas Exploration and New Ventures, Experienced Geoscientist, Explorationist and new ventures activities; PhD graduated In Geology (1991), bachelor (structural geology).
Senior Geophysicist with 25 years of experience - domestic (Canada) and international.
Electrician - Canadian journeymen , Instrument Technician - Canadian certification,10 years Supervisory, Startup and commissioning expert. Offshore FPU FSO. PLC Expert/ DCS, Experenced Trainer. High Voltage, protection relay testing, Valve repair, Work exp. in Canada, Libya. Indonesia.
Diagnose and repair engines, transmission and final drive systems including manual and automatic transmissions
Senior Project Material Coordinator, Warehouse Control Management, Procurement & Buyer Analyst, Operation Logistic & Crew Manning Administration and Project Coordinator.
B.Tech Chemical with Refinery,petrochemical Experience
I have over 32 years in the Coatings industry, 22 years as a Coatings Inspector (British Gas/CSWIP BG57012), with 14 years as a Coatings Advisor to ExxonMobil Nigeria. My duties For Exxonmobile included Inspection of all onshore and offshore facilities also new construction projects. Other duties in
Over 20 years experience in the petrochemical and industrial gas maintenance, capital projects and construction field. Specializing in the repair and alignment of mechanical rotating equipment, pumps, compressors, turbines, valves, process piping and tubing. Management, scheduling and planning of w
First
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
[ 22 ]
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com