Resume - From April 2008 to May 31: EMPLOYER: Astaldi Arabia Ltd, Qatar SIGNATION: ...

Misco Jobs

Resume #84805

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVES

To Build Career in the Field Of Quality Control and Quality Inspection At Major Companies by Utilizing My Technical and Communication Skills, Relevant Industrial Training And Extensive Computer Knowledge.

ACADEMICS

UNDERGONE BACHELOR OF ENGINEERING IN MECHANICAL FROM C.S.I. COLLEGE OF ENGINEERING (ANNA UNIVERSITY).

PROFESSIONAL QUALIFICATIONS

* ASNT NDT LEVEL II IN FOLLOWING METHODS.

ULTRASONIC TESTING (UT).
RADIOGRAPHIC TESTING (RT).
LIQUID PENETRANT TESTING (LPT).
MAGNETIC PARTICLE TESTING (MPT).

* (WAITING FOR RESULT: CSWIP 3.1)

PROFILE

Wide Exposure in Quality Control and Welding Inspection and NDT Related in Engineering Field.
Strong Knowledge of International construction codes, Standards, Intrex Standards and procedures.

PROFESSIONAL WORK HISTORY

1. From April 2008 to May 31:

EMPLOYER: Astaldi Arabia Ltd, Qatar

DESIGNATION: Quality Control Engineer.

PROJECT: Qatofin LLDPE Project, Qatar

DUTIES & RESPONSIBILITY

* To study the isometric drawing received from the clients and to identify the pipe lines and carry out the inspection work
* To Carry out Line punching during the Test pack internal review and assistance for the reports preparation.
* Preparation of internal punch list and clearance inspection during fabrication
* Witness of Hydro tests and Pneumatic tests of Piping
* Co-ordination with civil/construction departments for testing/backfilling activities
* To carry out reinstatement of piping and report preparation.
* To check and prepare orifice flange inspection and pipe flange alignment report.
* To study the P&ID and other circuit diagrams in the test pack.
* Co-ordination with painting department for performing wrapping/coating, holiday test, and maintaining QC reports.
* Monitoring the calibration of test instruments and equipments.
* Assistance for the document control
* Review and Interpretation of RT films as per ASME B 31.3, V.
* Carry out Penetrant Testing and report preparation
* Preparation of RT selection list for the Daily Radiography works
* Inspection and testing activities as per the inspection procedure
* To check the fit up stage prior and confirm that root gap, Off set, bevel angle are with in acceptable limit
* To witness preheating process and verify the chart
* To witness magnetic particle testing of fillet joints and check the surface & sub surface defect
* To do the penetrant testing as per the approval procedure is acceptable limit or not
* Piping as per the standard and specification
* Co- ordinates the different type of welding works
* Preparation of weld map and maintaining the weld record
* To select the joint for the NDT as per the welder coverage and line class percentage
* Maintaining of all inspection report and related documents in QA/QC department
* Co-coordinating with main contractor, third party and client
* Control calibrated measuring and test equipment used on the project
* Preparation of punch list and clearance to next stage like Erection and painting
* Preparation of test pack and submit to the higher authorities
* Co- ordinate with sub contractor for NDT activities like radiographic testing, magnet particle testing, Ultrasonic testing and penetrant testing
* Conduct all worker activities in the safe and environmental polices and procedure
* Co-ordinating for the inspection of structure such as bolt tightening, alignment, shim elevation etc

2. June 2007- March 2008

EMPLOYER: WENS Quality Assurance Pvt. Ltd
DESIGNATION: Inspection Engineer/ Welding inspector

DUTIES & RESPONSIBILITY

* Verification Fit up spool dimension Orientation, joint preparation according to the
Isometric drawing.

* Ensure proper preheating and monitor welding Parameter during welding.

* Carry out visual inspection of root run, cap and ensure inter –pass temperature as per approved WPS.

* Witness PMI performed on austenitic SS material.

* Witness destructive tests carries out on weld Metal and parent metal according to project
Specification.
* Review of PWHT chart and witnessing Hardness Survey.
* Preparation of all NDT reports
* Coordination of all NDT works
* Submission of reports to the clients
* Interpretation during Magnetic Particle Testing
* Interpretation during Dye Penetrant Testing
* Witness of Hydro Test
* Inspection of Fit up, DP test of root welds and weld visual
* Calibration and interpretation during Ultrasonic Testing
* Interpretation of RT films as per ASME B 31.3, V.
* To study the drawings received from the clients for Execution at site and clarify the ambiguities
SHUTDOWN PROJECTS

PROJECT I:
Client: SABIC (Ibn Zahr)
Post: Inspection Engineer
Project: Shutdown
Site: Saudi European Petrochemical Co
Duration: November 15th to 30th

PROJECT II:
Client: Saudi Aramco lubricating Oil Refinery (luberef)
Post: Inspection Engineer
Project: Shutdown
Duration: December 1st to 15th

PROJECT III:
Client: Saudi Consolidated Electricity Company
Post: Inspection Engineer
Project: Shutdown
Duration: December 20th to January 4th

PROJECT IV:
Company: J.K.Inspection Services
Post: NDT Coordinator
Site: Kakrapar Atomic Power Station, Gujarat (Shutdown)
Duration: July 15th to August 30th

PROJECT V:
Company: WENS Quality Assurance Pvt.Ltd
Post: Inspection Engineer
Site: North Chennai Thermal Power Station, Chennai (Shutdown)
Duration: September 23rd to October 13th

SITES WORKED:
* Saudi Aramco lubricating Oil Refinery (luberef)
* Saudi Consolidated Electricity Company
* Saudi European Petrochemical Co (SABIC)
* Qatar Petrochemical Company (QAPCO)
* Qatar Vinyl Company (QVC)
* Kakrapar Atomic Power Station
* Tamilnadu Petroproducts Ltd, Chennai
* Essar Constructions Ltd, Chennai
* Ennore Thermal Power Station, Chennai
* North Chennai Thermal Power Station, Chennai
* Asian peroxide Ltd, Sullurpett

DUTIES & RESPONSIBILITY

 To Carryout NDT Methods such as UT, MT, PT, RT, VT for Static Equipment such as Exchangers, Reactors, Heaters, Vessels and Storage Tank.
 Witness Hydro Test.
 Third Party Inspection of Different Manufacturers.
 Interpretation of Radiographs.
 Witness of Hardness testing.
 Thickness Gauging.
 Reviewing Test results and reporting same to the senior inspector or supervisor.
 To Carry out testing and evaluate the test results preparation of final documents to the projects owner's inspection plans. Well conversant in piping isometrics drawings & Engineering Drawings.

CODES STANDARD & SPECIFICATION

Well Conversant with ASME, ANSI, AWS, ASTM, API Codes & Guidelines.
Familiar with following Codes, Standards & Specifications:
* ASME - SEC-V
* ASME - SEC- VIII (DIV. 1 & 2)
* ASME - SEC- IX
* AWS - D1.1
* ASME - B 31.3

PERSONAL DETAILS
DATE OF BIRTH: 17th May 1985
LANGUAGE PROFICIENCY: English, Malayalam, Tamil, Hindi
NATIONALITY: Indian
RELIGION: Islam
MARITAL STATUS: Single

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8301 to 8350 of 10917)

Go to Search Parameters...

Brief Description

Business Degree and Petroleum Engineering Dilploma.

From April 2008 to May 31: EMPLOYER: Astaldi Arabia Ltd, Qatar SIGNATION: Quality Control Engineer. PROJECT: Qatofin LLDPE Project, Qatar DUTIES & RESPONSIBILITY • To study the isometric drawing received from the clients and to identif

Free! I have 16 years post qualification experience as a Project Engineer, project Controls engineer, Cost Engineer, Planning and Scheduling engineer. I have worked both on opeerator's team and contractor side. My experience spanned through deepwater projects in oil and gas industry, EPC projects etc

Crane Operator, worked offshore for 8 years. Qualifications include HLO, Rigging, First Aid, etc. I am confident & reliable with a flexible outlook to my work & a strong commitment to safe work practices. Extensive travel has given me the ability to develop a good rapour with local people

Fire and Gas Technician

I took a degree in mechanical engineer on April 2004. Although, as the most young new-graduated I dont have so many skills, I have great will to learn and work.

I am hard working and strong, both mentally and physically. I will be a good employee.

I have done diploma in chemical enngg i have 5 yrs of experience in PETROCHEMICAL PLANT(nAPHTHA CRACKER) AND PETROLEUM REFINERY

Mechanical Engineer with 2 year experience in the Gas industry in Operation and Maintenance Department.

At present I am working with Punj Lloyd in Procurement Division as a Engineer. I am a Mechanical Engineer from Thapar Institute of Engineering & Technology, Patiala, India. “Batch of 2003”

Refer below

I have 8 years experience in secretarial, document and information management with progressive responsibility within oil & gas / shipbuilding industries. Experience in the engineering and construction management processes and procedures as they relate to document management.

Job title : electronics engineering job in petroleum/oil/gas salary:$1500

I introduce myself as an Engineering Graduate specialized in Automobile Engineering.

WORKING AS A DEPUTY MAINT. MANAGER IN NAPHTHA CRACKER PLANT

I have extensive experience in multiple levels of construction projects including roles as supplier, installer, managing contractor, and owner’s representative, allowing me the ability to interface with all levels of a project.

"External foreign trade", English, French, native Russian, Norwegian, Business Correspondence, 2 years experience, advanced PC user, typewriting, purposeful.

I am Civil/Structure Engineer with more than 7 years experience in Construction and Engineering Design. I had experience in construction pipeline geothermal power plan, oil&gas project such as Gas Booster and Compressor Project Plan , fertilizer/petrochemical project.

Proficient & skilled candidate seeking full-time rotational employment preferably on land or offshore drilling rigs, Platfroms or Workover operations. Possesing strong operational knowledge of drilling and specialized service operations on rigs and well engineering operations.

Initiative and interpersonal ,ability to work without supervision,Good written and communication skills,Proficiency in microsoft word and AutoCad,Good team player,Technical proficiency.Bachelor of Engineering-Mechanical/Production Engineering,HSE-Level 3 Certified.

Motivated Landman with a proven track record in leasing and title research

HSE Manager On An Oil And Gas Construction Project With Over 1000 Employees; Construction Safety Officer Designate; Occupational Health, Safety And Environmental Leadership Diploma Near Completion

ƒæMechanical Design & detailing of Pressure Vessels, Columns, Heat Exchangers as per codes.ƒæDesign calculations by software (Codeware Compress,PV Elite) as well as manually

Class 1 Driver’sFirst AidH2S aliveWHMISFire Extinguisher

Entry level, I have skills in shiping,and 4 years experience in army. Have skils in painting, tractors etc.

•BSc in Engineering with 8 years of experience in Oil & Gas EPC and Communications industry. •Field support and Loop test coordinator for Petro-Canada RCP project site in Canada. •Excellent interface abilities with client/vendor management teams •Experience in preparing as-built data sheets, ins

Experienced Engineer (Quality Assurance, 6 Sigma, Design V&V and Leadership)

Five years of work experience in complementing functional areas such as Design, Manufacturing, Customer Engineering and R&D at large and mid-size corporations in USA and in India providing unique flexibility and cross functional skills

Well Test Interpretation in Horizontal and Vertical Wells

Ambitious Petroleum Engineer Looking forward joining a well reputable Global Company, and get the chance to be one of the team workers, as per my attached resume showing my qualification and studies.

Obtain a position utilizing my degree, knowledge and skills where applicable, especially in a support role in the areas of Information Technology and Systems

Looking for swamper or labourer work ASAP

Mechanical and Production Engineer with 20 years of mechanical design, project engineering and management experience in England, Chile, Argentina, Peru, Cuba, Canada, USA and Australia, fully bilingual in English and Spanish.

I have multiple abilities varying on the job at hand. I have a high intelligence, combined with mechanical aptitude, it is easy to learn virtually anything. The ability to be sincere and read both vocal and body language helps me to communicate with the people I meet.

Offshore Production Operations & Offshore Construction Operations

Well versed in contracts formation and administration, project management, claims mitigation and resolution, contract negotiation, subcontractor mangement, quality assurance on major projects thoughout the world. Results-oriented, with an ability to see any assignment to successful completion.

Mechanical maintenance equipment of all types

Seeking for a position for a Ordinary Seaman where my skills, knowledge, training, and great work experience can help improve your company.

Multi Dsicpline Insepctor with working experience in both onshore and offshore fabrication/Installation/Hook-up

Degrees in Electronics and Instrumentation.Highly detail oriented, and organized. Good planner, a self-starter with ability to meet deadlines, and personable. International experience in & gas and other industries.

JIB

Senior Planning Engineer, > 15 years experience in upstream oil&gas projects, construction.

I am a fresh graduate from university of padjadjaran, basicly in geological engineering..I declare myself as nice and energetic person, hard worker, quickly adapted with a new condition, i'm willing to be located anywhere. I have some experiences project in oil and gas company as junior geologist.

To secure a senior level position responsible in Project Management, Engineering, Procurement and Construction aspects of heavy industrial petrochemical, chemical and power plant projects.

I will be working and can learn at anytime

Maintenance Management Professional c/w 20 years of maintenance systems and manpower developmental expertise.

B.Tech (Chemical Engg.) from India's one of the premier institue , MBA(Operations Mgmt) from IGNOU . Wide and rich experience in Precommissioning, Commissioning, DCS operation, Field jobs supervision, Safety work permit system , Process Design review, P&ID , PFD , Mass and Energy balance , HAzop.

Petroleum Engineering Technologist- I have 5 years of field experience to complement my schooling. Main expeience includes well completions, workovers, and servicing wells. Additional experience in production equipment sales and enviromental consulting.

Certified Welding Inspector

Experienced in Fertilizer & Chemical Industry, Certified Welding Inspector in certain methods, Skilled in Mechanical Engineering, Professional Automotive Engineer, Bachelor degree and academic study for Mining & Metallurgical Engineering include training and big project with phosphate mines

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 [ 167 ] 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out