Resume - Seeking an opportunity in the oil and gas industry to develop and utilize expert...

Misco Jobs

Resume #84994

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
------------
Seeking an opportunity in the oil and gas industry to develop and utilize expertise in electrical/electronics, control, instrumentation and/or automation. Willing to work for experience.
------------

WORK EXPERIENCE:
------------
Ascenteus Sdn Bhd - Intern and absorbed as Hardware Design Engineer
(July 2008 – present)(present salary RM3200)
Main role is in the company:
o Perform research and development (RnD) of products in Ascenteus Sdn Bhd from concept, prototyping to production.
o Provide technical assistance to the sales team and technical support/training to the installation crew.
-Conducted 8 installations, test and commissioning of the SmartPools swimming and pool system.
-Revised, improved and standardized the SmartPools electrical and control system which involves usage of three phase AC, 6-pole motor, pumps, lighting, contactors, MCBs, ELCBs, ingress protection, isolator, wiring, timers, relays, inverters, etc.
-Developed working prototype of solar time and direction finder for Muslims using microcontrollers.
-Developed the SmartPools touch panel
-Assisting interns in undertaking their assignments mainly involving microcontrollers, electrical and electronic devices.

Special effects technical crew for the launching of IIUM Silver Jubilee.
(May 2008)
-Develop, prepare and operate a wired remote controlled mobile rig to carry an item to be used for the launching by the Prime Minister.

Final Year Project: Development of Path Following Autonomous Vehicle based on Vision
(July 2007–March 2008)
-Developed prototype for vision based object detection using OpenCV in Visual C++
-Set up of the base robot which involves electrical/electronics, electromechanical and mechanical selection and fabrication on which to implement the vision system
-Developed and implemented the robot controller to receive feedback from sensors, process the behavior of the robot and control the actuators.

2nd Runner up in the 2007 Robofest robot competition, The Conqueror organized by the Ministry of Science and Technology Malaysia.
(29 November 2007)
- Played similar roles as in the ROBOCON competition (below)

Demonstrator and Grader for subject MCT2102: Mechatronic Workshop
(July 2006–March 2008; 4 semesters)
Guiding students on:
-Controller system design and implementation using Mircochip's microcontroller line (hardware and software)
-Circuitry design and fabrication
-Guide on application and implementation of sensors and actuators

ROBOCON (Robot Competition), Contender, National Level
(2006, 2007 and 2008)
-Circuit design, prototyping and fabrication
-Controller system design and implementation using Mircochip's microcontroller (hardware and software)
-Circuit and software troubleshooting
-Mechanical design and fabrication
-Mentor and trainer for new recruits
-Core team members leading the team in 2006 and 2007
-Initial team setup and organization

EDUCATION & CERTIFICATION:
------------
Bachelor in Electronics-Computer and Information Engineering
International Islamic University Malaysia (IIUM)
o Final CGPA: 2.801 2003 – February 2009
(Official graduation)
A-level in Engineering

Matriculation Center, IIUM
o CGPA:2.751 2001-2002
Secondary Education, Sekolah Menengah Agama Kuala Lumpur o SPM 2000: 4A 4B 2C
o PMR 1998: 7A 2B 1996-2000

SKILLS & ABILITIES
Years of
Skills Experience Proficiency
-----------------------------------------------------------
-Logic reasoning, deduction and analysis.
Experiance: >5 yrs. Proficiency: Very good

-Word Processing
Experiance: >5 yrs. Proficiency: Very good

-C/C++ Language
Experiance: >5 yrs. Proficiency: Very good

-Electrical/electronics system troubleshooting
Experiance: 5 yrs. Proficiency: Very good

-Logic System Design
Experiance: 5 yrs. Proficiency: Very good

-Microcontroller based system design
Experiance: 5 yrs. Proficiency: Very good

-Electrical/electronic circuit design
Experiance: 5 yrs. Proficiency: Very good

-Coding ability
Experiance: >5 yrs. Proficiency: Good

-CAD modeling and design (AutoCAD, Catia, Alibre)
Experiance: 4 yrs. Proficiency: Good

-Programmable Logic Controller (PLC)
Experiance: 1 yr. Proficiency: Beginner

ADDITIONAL INFORMATION:
------------
-Language: Fluent in spoken and written English, and Malay
-Availability: 1 weeks notice
-Expected salary: RM2300 (negotiatable)
-Willing to travel and relocate when necessary
-Works and learns best in an applied and hands-on environment.
-Initiative and intuitive learner. Takes own initiative to learn new things and explore new skills and knowledge and learns quickly through observation and deduction. Most of the skills above were self taught.
-Very good in problem solving and troubleshooting. Peers and lecturers alike have asked for consultation and troubleshoot their projects (mainly related to electrical/electronics/electro-mechanics).
-Interests: Cycling, Robotics, Internet surfing, Reading, Automation, Control, Instrumentation, Remote Control (RC)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9401 to 9450 of 10916)

Go to Search Parameters...

Brief Description

• Extensive experience managing Document Control deparments within Engineering, Construction and Petrochemical Industries.

Project Controls / Project Services / Business Management

Project Management / Production Control

B.E.(ECE) in College of Engineering, Guindy, Anna University, Chennai having experiences in working in Integrated Systems Laboratory (Anna Univ) on various projects and interested in taking up a career in Analog VLSI Design

im a hard worker and want to learn and server the company. im willing to relocate and travel anywhere in the world

Dynamic professional Process Engineer with fours years of experience in production, planning and control, process optimisation and man management in base metals refinery. Proven technical capabilities in hydrometallurgy, electrowinning, pyrometallurgy, process control and management of new process

Technical

Site Construction Manager Oil and gas Industry. Over 20 years experience. Process plants, facilities and pipelines.

The last ten years I worked as full time machinist, production supervisor/fitter, and maintenance supervisor hands on, technician/ supervisor in heavy mining and industrial environment.

I have experience with SCADA system using Citect and RSView (Allen Bradley) as Man Machine Interface (MMI) and control system such as Allen Bradley PLC5, SLC500, ControlLogix, SimaticS5 and SimaticS7.

I have been working for the same company for 10 years in different divisions. Right now I am a crane driver/operator. Who is always up for a challenge.

A results-oriented Analyst combining hands on management consulting, project finance, market analysis and mining operations experience, I provide actionable advice for the key business decisions that enhance competitive positioning.

Recruiter with more than 3 yrs exp iN Recruitment, JD Preparation, Sourcing, Shortlisting, Offer, Visa Processing

I have done my MBA and Diploma in information technology. I have worked in diffrent feilds

I have been working in a Piping related discipline for more then 15 plus years and have experience in Engineering design for Offshore Platforms, Refinery Projects, Process Plant, Wafer Plant and also in the Architectural Building & Mechanical Engineering Industrial.

Marine Engineering, Risk Assessment, Lloyds Surveyor, Project Management FPSO Projects worldwide

Iam an Indian National . Iam sailing as 2nd Officer In P.S.V in Gulf Offshore. I Hold COC issued in U.K

Petroleum Engineer, with 5 years experience in International Services Company for Oil and Gas Exploration and Production. Within a complete Integrated Study Team, performed Engineering analysis in six Venezuelan and Mexican Fields.

Extensive and progressively responsible hands-on management experience.

Currently employed as the primary Electrical Engineer. Engaged with improving safety, training, documentation, and implemeting preventive maintenance goals.

Seeking an opportunity in the oil and gas industry to develop and utilize expertise in electrical/electronics, control, instrumentation and/or automation as a new entry or trainee engineer.

•Nebosh International certificate in Occupational Health and Safety , Membership Examaination of The Institution of Fire Engineers UK., Fire Officer course from National Fire Service College Nagpur India

Welding Engineer

I graduated in July 2006 with a BE Honours Degree in Manufacturing Engineering. I have over two years’ experience as a Process/Project engineer in a multinational company. I have completed courses on DOE & PDA and Project Management. Proficiency with Microsoft Word, Excel, PowerPoint, AutoCAD,etc

BE,MBA graduage having 13+ years experience in Sales & Marketing of Engineering, Flow Control & Instrumentation Process Products

i have complited a MSc degree from pune univeristy,worked as a geologist in geotechnical field,wel known to GPS ( Trimble Geoexplorer 3 )

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

I am a Fire & Safety Engineer,Presently working as an ENGG. (F & S) [Fire Station Incharge] in a PETROCHEMICAL INDUSTRY with having an experience of 2yrs , Have done 4yrs Bachelor of Engineering in FIRE & SAFETY, Presently persuing P. G. Diploma in Industrial Safety.

With more than ten (10) years of extensive experience and knowledge in Pipe stress calculation and support design of oil & gas, petrochemical, refinery, chemical, LNG, LPG, onshore, nuclear power plant and subsea piping projects.

M.Sc. Environmental Engineering and B.Sc. Civil Engineering holder seeking more experience. Although I do not have long working experience, I assure you that I am a keen learner and will work hard for the department if I am selected.

Security Manager

Over 20 Years experience in International and Domestic assignments in the Electrical and Instrumentation Fields. Assignments internation-ally have been in Project/Construction management, Supervision, QA/QC and commissioning. Project experience is diverse and in-cludes mining and extraction/ recov

In-service / shutdown inspection of most of the static equipments in a plant, such as pipe works, pressure vessels, hydrogen crackers, reactor vessels, storage tanks, reformer tubes, risers, topside structures, well head parts, valves, etc. , Inspection of all plant construction related activities

12 Years Maritime Experience • Crew Training and Management implementing. Marine Safety, Salvage, Port and Offshore Operations • Policy and Procedure Enforcement/Compliance

A qualified professional with 6 plus years of expertise, with sound technical and commercial practices with consulting experience in Change and Project Management in the areas of EHS management, Sustainability and Corporate Governance with due imp. to CSR, HR and Social Environment.

Engineering graduate experienced in installation ,pre-commisiioning ,commissioning

Geologist

Over 25 years Quality Management Supervision experience in the Oil & Gas and Heavy Engineering construction.

Adaptable to various working conditions including a multi-national workforce and a minimal supervision. I enjoy learning new skills and want to improve my drilling skills in international posting. I’ll be a good asset for my employer as I am a proven team player available to work world-wide.

Application for Heavy Equipment operator and mechanics.

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

Multi lingual professional with MBA in Supply Chain Logistics. A proven effective communicator and negotiator with extensive experience in field operations supporting military, humanitarian and commercial operations.

A dynamic professional with over 18 years of rich experience in Procurement, Vendor Development and Inventory Control.

I'm a recent graduate in Metallurgical Engineering and have an extensive Internship experience in the Oil and Gas Industry.

Drilling Crew

Excellent experience, coupled with a strong quantitative and analytical background, makes me an excellent candidate

Controls I&C Engineer

Electronics/Instrumentation Technician Specialist

Quantity surveyor, estimation and land surveying works

Consultant, Project Management, Mechanical, Marine Engineering, HSE and Quality.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 [ 189 ] 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out