Resume - I'm 31 years old working as a condition monitoring engineer in Badr Petroleum Co...

Misco Jobs

Resume #85002

CONTACT INFORMATION:
View contact information...

Technical Qualification Certified vibration analyst from VIBRATION INSTITUTE, USA

Certified NDT Level-II at ASNT:
* Radiographic Testing
* Dye Penetrate Testing
* Magnetic Particles testing
WORK EXPERIENCE
*Present Employment (March 2003-Present)
BADR PETROLEUM COMPANY (BAPETCO) joint venture with SHELL company in OBAIYED field located in (Western Desert)
Job Title: Condition Monitoring Engineer (Rotating Equipment Vibration Engineer)
Nature of Jobs & Responsibilities
A-Plan, coordinate and supervise the Condition Monitoring groups to ensure all Condition Monitoring maintenance programs work activities such as vibration monitoring and analysis, lube oil collection and analysis, piping vibration inspection, valve passing inspection, thermography inspection, noise inspection
B-Implementation of site wide rotating equipment vibration (and other 'condition based') monitoring programme and Provided technical and spares support to mechanical maintenance group.
C- Knowledge of high speed complex rotating equipment and their maintenance techniques, repairs, diagnostics and fault analysis. (Gas turbines, pumps, motors, gearboxes, turbo compressors, screw compressors, Reciprocating Compressors etc)
D-Working experience of Bently Nevada / CSI / SKF / IRD - PC based On-Line & Off-Line Condition Monitoring systems (Hardware & Software)
E-Manage and develop Predictive Maintenance Programme for rotating machinery covering over 500 rotating machines. The equipment is varied, typically gas turbine, air and gas compressors and general purpose pumps
F- Building up machinery data base for condition monitoring; organizing a schedule for monitoring the rotating machines in the plants.
G-Collecting vibration data using data collectors, analysis these data using computer software, interpretation of results, diagnosis of equipment defects and producing technical reports to improve reliability of the machine and machine performance.
H-Onsite troubleshooting and rectification of activities
I- Monitor major rotating machinery in terms of operational, maintenance data, trend and recommends/implements changes in maintenance strategy to improve performance.
J-To carry out the unplanned contingency works (defect or failure) and advises the procedure for the proper repair, with reference to the design parameters and the applicable standards.
K-Good experience in dealing with LAZER alignment of equipment.
L- Performing predictive maintenance programme of rotating machinery through SAP system
M-Good experience in dealing with NDT inspection methods:
„³ Liquid penetrate testing (PT)
„³ Magnetic particle testing (MT)
„³ Ultrasonic testing (UT)
„³ Radiographic testing (RT) [by a contractor through Projects Dept.]

*Previous Employment(June. 2002-March 2003)

ABU ZAABAL ENGINEERING INDUSTRIES COMPANY (Hot & Cold Rolling Mill)

Job Title: Condition Monitoring Engineer (Rotating Equipment Vibration Engineer)
Nature of Jobs & Responsibilities
* Vibration analysis for rotating equipment and giving technical support for breakdown diagnostic.
* Review technical performance of existing, and evaluate and implement new, plant/equipment technologies to improve reliability and reduce maintenance costs.
* Plan necessary actions to ensure that maintenance and repairs for all rotating machinery including (Centrifugal pumps - (Ingersoll -Dresser, Goulds, Sulzer, Allweiler, Grundfos), Reciprocating pumps (Lewa, Ingersoll - Dresser, Wheatley Dresser).
* Provide consultancy for purchase & installation of all mechanical aspects of rotating equipment - i.e. advise, review& approve.
* Monitoring of mechanical erection and commissioning steps of cold rolling mill plant with SMS DEMAG Group in terms of rotating equipment
* Provided technical and spares support to mechanical maintenance group and implementation of site wide rotating equipment vibration (and other 'condition based') monitoring programme.
* Develop and maintain rotating equipment engineering information library and management systems via SAP
* Managing of the mechanical manpower & assigning specific responsibilities according to their experiences and skills.
* Good experience in dealing with NDT inspection methods:
„³ Liquid penetrate testing (PT)
„³ Magnetic particle testing (MT)
„³ Ultrasonic testing (UT)
„³ Radiographic testing (RT) [by a contractor through Projects Dept.]

Local training

2008
Training MAN TURBO AG Schweiz.
Compressors Operation and Maintenance

2007
Training RITEC vibration corp. as a vibration institute representative, USA
(Machinery vibration analyst for rotating equipment)

2006
Training Material Engineering Office.
Failure analysis & non destructive test

2005
Training RITEC vibration corp.
Balance, Alignment And Vibration Analysis

2003
Training Badr petroleum company.
Condition monitoring of rotating machinery
2001
Training Cairo Oil Refining Company.
Heat Exchanger &Power Plant Maintenance

2000
Training The Egyptian pump company (RODAN co.)
Pump training course.
Training Abroad from 19th ¡V 27th February, 2004 SMS DEMAG co.
Theoretical & practical training courses for the plant area Cold rolling mill ( in Germany)

from 1st ¡V 12th March, 2004 LAMINOIR DE DUDELANGE (Arcelor Group).
Theoretical & practical training courses for the plant area Cold rolling mill ( in France)

from 15th ¡V 19th March, 2004 LAMINOIR DE DUDELANGE (Arcelor Group).
Theoretical & practical training courses for the plant area Pickling line (Cold rolling mill) ( in Luxembourg)

EDUCATION

2002 Bachelor of engineering, Ain Shams University, Mechanical Power Department

Grade: Good

Graduation Project: Design of Air conditioning systems Goals:
1-Automatic calculation of cooling and heating Load
2-Automatic duct sizing of any HVAC system
3- Using Carrier E20-II and Block Load Programs for:
Cooling load estimation.
Duct design.

Project Grade: Very Good

MISC.
INFORMATION

Computer Skills:

AutoCAD (various versions) 2D and 3D engineering Drawing.
Competent in use of Windows based applications (spreadsheets, word processing, web authoring and presentation packages), SAP (Plant Maint.), and SKF MICROLOG CMVA60 condition based monitoring software.
Familiarized with SAP maintenance-planning programs. This is used to generate all notifications and work orders as well as activities and provide history and feedback information to management.
Office applications (Word, Excel, PowerPoint,
PhotoShop).
Good Knowledge of the Internet applications.
Carrier program (E20-ii) (cooling load, duct sizing).
Good Knowledge of computer hardware (maintenance and troubleshooting).

Languages:
Native language Arabic.
English (reading-writing-speaking): Very Good

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5401 to 5450 of 10926)

Go to Search Parameters...

Brief Description

I had a diploma of INTERNATIONAL WELDING ENGINEER in central metallurgical researches and development institute under certification of IIW (international institute of welding). Certificate no IWE AT 0708.. I worked in EMEC as a Drilling fluid Engineer in syria from 3/2009 till now.

BE Mechanical, Good surveying and project management skills, Sales and Marketing

My unique mix of previous work experience combined with my completion of the Associate of Applied Science Degree in Process Technology makes me an ideal candidate for employment with your company.

I'm 31 years old working as a condition monitoring engineer in Badr Petroleum Company joint venture with SHELL company where my nature of job is to manage and develope predective maintenance programme for rotating machinery through vibration analysis, lube oil analysis and thermography

I am a petroleum engineer from UT-Austin. I want to go offshore for my first full time job. I enjoy being in the field over the office. I will be up to any task that is required.

Key responsibility of Marketing and selling our Products like ATC, Auto Loader, Chillers & Coolers, Hypoid Motors, Telescopic Covers, Rotary Tables, Spindles for south India Region.

Working at SUI FIELD GAS COMPRESSOR STATION (SFGCS), having daily throughput of 600 MMSCFD

Hands of experience with good knowledge of engineering (standards) & trouble shootings working with one of the major such as Qatar Gas, other than working with petro power plant, oil/gas industry & Heavy metal industry

To work in a challenging and stimulating environment envisaging personal growth and career development by associating with an organization, which provides an ambience for learning and growth, where my problem solving talents and designing skills can be utilized.

Panel operator with over 10 years experience in gas receiving facilities, looking for overseas experience

Senior Drilling Engineer & Supervisor

Maintenance, Repair, Overhauling of static and rotating equipments, turbo machineries in Petrochemical plants (Turbines, Centrifugal and reciprocating compressors, Diesel engines, Pumps, Strippers, Distillation Columns etc), Safety permits, Shut down works, etc.

WELDING INSPECTOR CERTIFIED WITH B.E MECHANICAL

Bachelor of science degree holder with skills in mineral exploration

2 yrs exp in piping engg and pdms ,mechanical engineer

.Bacholar Degree In Chemical Engineering. Two Year Experience As Drilling Fluid Engineer.

Mechanical, Fitter, Basic Welder and Electrical

8 years comprehensive experience as a Senior Condition Monitoring Technician in Oil & Gas / Petrochemical / Fertilizer Industries in Middle East, like RasGas LNG Company Limited Qatar, Kuwait Oil Company (K.O.C), Kuwait, Fertilizers and Chemicals Travancore LTD (FACT) Cochin, Petrochemicals etc.

Ship Design Engineer - Piping & Machinery

Independent Professional Landman with 8 years of experience in running title, lease acquistion, due diligence, curative, surface damages, ROW and easements , permits and environmental issues with Federal and State regulatory agencies, including Phase 1,2 and 3 ESA and remediation.

Eight years of experience in Oil and Gas industry and Stimulation positions with experience in drilling, tools, and cementing. Strengths include knowledge with all Frac fluid systems, frac equipment, stimulation techniques, coordinating, and teamwork.

Strong backgroun in all asspects of Integrated Petrophysics from data acquisition and qyality check, Open and Cased Hole formation evaluation and reservoir monitoring, formation pressure analysis, to petrophysical parameters and Core Analysis skills.

Project Manager

Experienced sandblaster/painter/foreman/safety tech

Engineer (Insulation, Painting, Fireproofing, Hvac, Scaffolding & Refractory)

Control room operator-process operator-gas-lift operator-gas dehydration-..

Total Experience 14 Years – [Gulf 10 Years & India 4 Years]

November 1998 - Present at Reliance Industries Limited [Refinery Complex]

I have retired from the US Army so I am not looking for a benefit package, ie… medical and dental. Don’t waste my time with Alcohol and tobacco work to improve all situations job related tasks. Always give 110% to the company that work for. Currently working abroad 5th generation Drillship in Africa

Fire Marshall or fire Captain

Ten(10) years of experience in analysis, design and detail engineering of offshore structures and onshore structures associated with Oil & Gas Sector, Petro-Chemical and Petroleum Industry.

Reservoir engineer (BSc Petroleum Engineering ) with 4+ years of experience in the field of designing of reservoirs exploitation. Also, strong background and skills concerning petroleum engineering. He is looking for a worldwide employment opportunity.

I believed to be a dynamic responsible and autonomous person. I am very polyvalent. I present a high degree of adaptation to accomplish new tasks. I worked on team my entire research and teaching career. I communicate easily with different culture using different languages.

I have M.Sc. (Masters) Degree in Petroleum Geology, have total experience of 7-8 years, have experience mainly in Petroleum and also mineral Exploration. Have worked in BP and BHP. exploring for a job as I am working no where now a days.

Reservoir development, geologic modeling Landmark

I am currently employed as Marine Technical Manager for ASCO Plc in Aberdeen.

14 years with Texaco. ChevronTexaco. Sales & marketing professional. concentrating on downstream, fuels, retail lubricants. Educated to MBA

More than 11 years business consultancy, project management, professional engineering and supervisory experience primarily within the oil and gas industry

Experienced about fourteen years in Refineries,Gas,Petrochemical and industrial units including teaching.

UNIX / LINUX / AIX Systems Administrator

A position with strong emphasis on Industrial Automation & Control with direct exposure to System Design, Configuration and Implementation. Support responsibilities utilizing strengths in the areas of project management and system architecture.

I am looking to be a part of a succesfull drilling team.

Oil and Gas Professional with expertise in Operations and Finance developed over a seventeen year period in foreign countries

I am a well seasoned naval architect experienced in SPAR, FPSO, TLP, and Semi-submersible design and analysis.

Highly competent, experienced HSE professional seeks overseas project

Process operator/technician. Had experience and knowledge in process operation, both in petrochemical and oleochemical industries

calibration, Mentinence, Installation, And wired the all kinds of control panels.Undestand all kinds of drawing.

Project Manager-Oil & Gas: 8+yrs. experience in Fortune 500 Oil & Gas Company

5 yrs of exp in research and instrumental analysis

I have been working in the oil field since 1999. I have worked on onshore fields in the south of Algeria for SONATRACH company and her drilling and cementing department as drilling supervisor.

First Prev 101 102 103 104 105 106 107 108 [ 109 ] 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out