Resume - Inspection of piping.pipelines,offshore structures,welders qualification,pqr,int...

Misco Jobs

Resume #85058

CONTACT INFORMATION:
View contact information...

QA/QC ENGINEER.
WELDING/MECH
BODKE SACHIN SHARADCHANDRA.

Academic Records
Diploma in Mechanical Engineering
Higher Secondary School (Science)

Summery of experience:

Performing Hold, Witness And Surveillance inspection and tests for Piping, pipelines, pressure vessels, jacket installations, sub skid installations, riser spool fabrications, internal coating by CRTS and Offshore Structures at manufacturing facilities, construction sites and on Pipe Lay barges, Drilling rigs to ensure compliance with requirement and project specification.
* Inspect material and equipment such as Pipes, valves, skids, consumables, plates, shapes as applicable to ensure compliance with requirements for proper handling, storage and protection at construction sites.
* Monitoring contractors Quality system, records such as welder performance, weld repair data, root cause analysis, corrective and preventive actions, consumables, ndt, hydro test.
* Depth knowledge of API standards,ASME B31.3,31.1,31.4,31.8,AWSD1.1
* Project expediting.
* Job completion approval, certifying and verifying jobs as per project, owner and international standards requirement.
* Witness testing activities like welder test, mechanical test, PQR, and other test.
* Third Party Inspection for mechanical, piping, structural, pressure vessels, painting, welding, lifting etc.
* Review and approve the documents, procedures, and certifying activities on behalf of owner side.
* Attending to inspections and tests, according to the approved ITP, verifying the inspection reports and validating the results.
* Attending industrial inspections on call out basis and certifying the work.

Certification & Qualification:

o CSWIP 3.1(28168)
o AWS-Certified Welding Inspector (05071591)
o ISO 9001:2000 Lead Auditor course IRCA Approved.
o ASNT Level II- Magnetic Particle, Liquid Penetrant & Radiographic Testing o Diploma in Mechanical Engineering

Attended Courses & Training record:

* Work Permit course at PDO
* Supervising Safety Course at PDO
* Fire Fighting Course at PDO
* First Aid Course at PDO
* H2S Awareness and Escape at PDO
* Scaffolding course at PDO.
* HUET(Helicopter under water escape)& Sea Survival

Career Record:

ABS Group Inc. (Consulting)
Client: SAUDI ARAMCO
* Working as a client representative on OFFSHORE BARGES, DRILLING RIGS.
* Knowledge of going jobs like Laying of pipelines, Piping, Jacket installation, Platform modifications, Riser spool fabrication, Sub sea skid installation
* Witnessing at different stages on welding, internal coating, external coating, tapewrap, nde, Hydrotesting, and Lay-up procedures.
* Monitoring the on going jobs to meet the client standards and procedures.
* Incoming material inspections such as pipes, plates and shapes as well as welding consumables. Review of material certificates, batch certificates, expiry dates and verification of mechanical, physical and chemical composition values as per project specifications
* Review and approve the documents, procedures, and certifying activities on behalf of owner side
* Witness testing activities like welder test, mechanical test, PQR, internal coating coupon by CRTS methods, Auto UT procedures.

* Inspect material and equipment such as Pipes, valves, skids, consumables, plates, shapes as applicable to ensure compliance with requirements for proper handling, storage and protection at construction sites

ABS Group Inc. (Consulting)
Client: KUWAIT OIL COMPANY.
* Incoming material inspections such as pipes, plates and shapes as well as welding consumables. Review of material certificates, batch certificates, expiry dates and verification of mechanical, physical and chemical composition values as per project specifications.
* Inspect material and equipment such as Pipes, valves, skids, consumables, plates, shapes as applicable to ensure compliance with requirements for proper handling, storage and protection at construction sites
* Inspections of piping, offsite, yard piping and irons.
* Call out basis inspections.
* Project expediting.
* Job completion approval, certifying and verifying jobs as per project, owner and international standards requirement.
* Witness testing activities like welder test, mechanical test, PQR, and other test.
* Third Party Inspection for mechanical, piping, structural, pressure vessels, painting, welding, lifting etc.
* Review and approve the documents, procedures, and certifying activities on behalf of owner side.
* Attending to inspections and tests, according to the approved ITP, verifying the inspection reports and validating the results.
* Attending industrial inspections on call out basis and certifying the work.
* Lifting items inspecting and certifying.

TEKFEN Construction & Installation Company
Ras Laffan to Mesaieed Ethane Transmission Pipeline Project Qatar
Client: Qatar Petroleum
QA/QC WELDING INSPECTOR

RESPONSIBILITIES

* RAW MATERIAL INSPECTION
* INSPECTION OF PLANT PIPING,OFFSITE,YARD PIPING,CROSS-COUNTRY PIPELINE FOR LIQUID AND GAS.
* CONTROL AND WITNESSING NDE TEST
* FIT-UP INSPECTION AS PER ISOMETRIC DRAWING
* WELD VISUAL INSPECTION (SS,LTCS, CS)
* WELDER QUALIFICATIONN TESTS
* QC RELATED ACTIVITIES DURING FABRICATION OF PIPING SUCH AS JOINT PREPARATIONS,FIT-UPS,DRAWINGS.TREACIABILITY.
* WITNESSING HYDROTEST ACTIVITIES
* PREPARATION OF PUNCH LIST
* PREPARING TEST PACKS

Consolidated Contractors International Company (CCIC)
Project: 3rd RNGL Train Project Ruwais U.A.E
June 2006 to June2007
Client: GASCO
QA/QC Inspector

RESPONSIBILITIES

* RAW MATERIAL INSPECTION
* INSPECTION OF PLANT PIPING,OFFSITE,YARD PIPING,CROSS-COUNTRY PIPELINE FOR LIQUID AND GAS
* CONTROL AND WITNESSING NDE TEST
* FIT-UP INSPECTION AS PER ISOMETRIC DRAWING
* WELD VISUAL INSPECTION (SS,LTCS, CS)
* WELDER QUALIFICATIONN TESTS
* QC RELATED ACTIVITIES DURING FABRICATION OF PIPING
* WITNESSING HYDROTEST ACTIVITIES
* PREPARATION OF PUNCH LIST
* PREPARING TEST PACKS

GALFAR Engineering & Contracting LLC OMAN
December 2003 to May 2006
CLIENT: Petroleum Development of Oman (PDO)
QA/QC WELDING INSPECTOR
RESPONSIBILITIES

* RAW MATERIAL INSPECTION
* FIT-UP INSPECTION AS PER ISOMETRIC DRAWING
* WELD VISUAL INSPECTION (SS,LTCS, CS)
* WELDER QUALIFICATIONN TESTS
* QC RELATED ACTIVITIES DURING FABRICATION OF PIPING
* WITNESSING HYDROTEST ACTIVITIES
* PREPARATION OF PUNCH LIST
* PREPARING TEST PACK

SAI SERVICE STATION
May 2001 to November 2003
QC MECHANICAL INSPECTOR
RESPONSIBILITIES

* INSPECTION FOR FABRICATION AND ERECTION OF STRUCTURAL WORK
* PREPARING MATERIAL REQUIASITON AS PER DRAWINGS
* MATERIAL IDENTIFICATION
* MARKING INSPECTION
* FIT-UP INSPECTION
* WELD VISUAL INSPECTION
* DIPENETRATING TESTING
* OFFERING FOR NDT
* HYDRO TESTING OF PIPE SPOOLS
* FINAL DIMENTIONAL INSPECTION
* DOCUMENTATION AS PER CLIENT REQUIREMENTS

METASTRIPS Ltd.
August 2000 to April 2001
WORKED AS A JUNIOR ENGINEER IN CASTING

THIS COMPANY IS A FIRST PLANT OF ZINDAL GROUP IN GOA ENGAGED IN MAFACTURE OF DIFFERENT TYPES OF BRASS STRIPES USING BATCH PRODUCTION
RESPONSIBILITIES

* MANTAINING THE REQUIRED TEMPERATURE FOR MOLTEN METAL
* MAINTAINING THE COPPER TO ZINC RATIO

FINOLEX ESSEX Ind. Ltd.
August 1999 to August 2000

PRODUCTION ENGINEER (TRAINEE)
RESPONSIBILITIES

* INCHARGE OF COMBUSTION SECTION
* KEEPING TRACE ON VARIOUS COMBUSTION PARAMETERS
* MAINTAINING THE REQUIRED TEMPERATURES OF THE DIFFERENT FURNACES
* MAN POWER HANDLING AND MAINTAINING DAY TO DAY PARAMETERS

ATLAS GEARS
February 1998 to November 1998

TRAINEE INSPECTOR
RESPONSIBILITIES

* RAW MATERIAL INSPECTION
* DIMENTIONAL INSPECTION OF FINSHED GEARS
* QUALITY DOCUMENTATION
* SETTING OF LATHES
* MAINTAINING THE PROCESS PARAMETERS

Other Skills:

o Secured Certificate in AutoCAD 2000i (Basic)
o Working knowledge in M.S-Excel, M.S-Word o Valid GCC Driving LICENSE.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8851 to 8900 of 10902)

Go to Search Parameters...

Brief Description

fresh graduate from mechanical engineering University of Indonesia. I am a ambitious and hardworking person. My GPA is 3.17. In addition, I am a easy to adapt to new environment.

I am looking for an entry level job in the oil and gas industry. I will graduate with a B.S. in Geology from Kansas State University in May, and will be ready for employment at the end of June.

I am working as a Member of a petrochemicals company of much repute at Haldia, India for the last 4 years. Prior to that I had been working with Coates India Ltd, a chemical company based at Calcutta. I have total 6years experience in the field altogether.

I am working with Engro Chemical Pakistan Ltd., since start of 1999, as a Chemical Plant Operator at Urea Unit, and wish to join else where in the world.

branch=EEE fresher location=anywhere

Seeking possible internship/future employment

Recently graduated Petroleum Engineer from the University of MO-Rolla, seeking full time employment in the United States.

I have my IWCF DRILLER CERTIFICATE valid up to 2003. I am very much interested in joining the challenging offshore/onshore industry as an entry-level person.

I have completed Bachelor of Sciences in Mining Engineering. I want to start my career in Oil and Gas field. I am enclosing my CV. Subjects which I have studied in four years program are mentioned in CV. If you have any challenging job or post of trainee or apprentice, please do call.

Petroleum Geologist who has graduated in 1993 from Gadjah Mada University, Indonesia. Still reading several books about drilling, subsurface pressure and seismic stratigraphy until now. I learned Landmark's softwares like Seisworks and Stratsworks.

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

Mechanical Engineer, Project Engineer and Project Management Services

Safety, Environment, Industrial Hygiene, Loss Prevention, Security Program Management

I’m a good communicator who is able to work in a team and can handle pressure. . I am also willing to relocate, work over-time, after hours or/and be on stand-by if and when necessary.

Am instrumentation Engineer with 1 yr Exp in UAE.I am interested in service engineering or Operation side job

Inspection of piping.pipelines,offshore structures,welders qualification,pqr,internal audits,quality plans review,test packs review.

Project Management, Senior Mechanical Engineer, Mechanical & Piping Supervisor, Design Engineer

10 Years in Electrical, Instrumentation & Cathodic Protection. Specially in Erection, testing, calibration of instruments, loop checking, sequence checking, pre-commissioning, Commissioning, Design verification, QA/QC, Project management, Billing and handing over of various projects like EHV Sub-St

Exploration Geologist

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Planning Engineer, BS Industrial Technology, SAP PM Module Expert, Primavera P3/3e Hands on Experience.

HSE Specialist

Proficient with Leica RTK GPS, Total Stations & survey specific computer programs; Microsurvey, Autodesk Land Desktop, Leica Geo Office & Excel. Experienced pipe line & fibre optic locator.

Safety Officer/Adviser. Cert IV OHS level, Cert IV Training & Assesment. Qld WHSO accredited. 5 years experience - resource, retail industries. Hands on proactive professional to facilitate Safety /Environmental/Risk Management plans/systems to Australian Standards.

Free! Worked as a roughneck for Nabors Drilling USA and had the opporunity to go Directional for Baker Hughes INTEQ where I had been employed as a DD IV until just recently. Was laid off due to lack of work and would really like to get back to work ASAP. I am very responsible and hard working.

Lead Mechanical Piping Engineer Gas and Power Plant site office testpack hydrotest pipe support punch list

Six years of experience in execution of maritime jobs like Construction of Rubble mound breakwater (for Naval Base & LNG Project ) Jetty ( Ethylene Terminal & LNG project) and Berths ( for LNG loading )

Production Manager, Process Engineer, Project Engineer, Metallurgist

Ten years experience in design, construction, water, wastewater treatment plants, buildings, roads, Certified in Occupational Health and Safety Canada, AutoCAD, B.E. Civil, and ME Environmental (Public Health) Engineering, Valid Ontario class G drivers license, Water Treatment Plant, Water Distri

-Installation the Network’s and maintenance,Interface Between systems, Corrective and Preventive Actions of Hardware and Software, Adviser in applications Maquila Systems, Customer service Maquila’s Systems. wireless communications, two way Radios,

i'm 26years old, i hold a B.ENG Degree in Petroleum Engineering from university Portharcourt, with 2 years in petroleum production operation with shell petroleum. Beside my experience i need a company who can employ me IN ANY kind of petroleum engineering JOB.

Dynamic leader and team builder, consistently motivating others toward success.

Seeking an analyst position. Highly innovative graduated offering more than 2 years in business and credit analyst experience and a proven ability to go beyond expectations. Willing to travel and relocate

Five years increasing responsibility and leadership in Power Plant, Analytical Chemistry, Mechanical Operations and Maintenance. Expert in the fields of Water Sampling , Maintenance Planning, and Record Audits

I would like to introduce my self as young ,enthusiastic Mechanical Engineer working currently with M/s Hasan Juma Backet Trdg. & Contg. LLC Oman for last two years in Water & Waste Water field. I can assure you if given a chance i can come up to the expectations of my seniors.

Marine Engineer with an experience of around 5 years at sea, looking for an opening in the oil fields.

please see below

More than 4 years experience in Oil & Gas Refinery in Construction to Start-up Worked in 3 different projects with International Companies. Installation of equipment, Precommisioning & Commisioning system

Would Like To Work In O&G Organization Where In I Can Leverage My Knowledge And Thereby Add Value To The Company. Would like to work on Onshore rigs.

ROV Pilot Training, BOSIET, HUET. Offshore Medicals, STCW 95

diploma im mechanical engineering,able to handle all kinds of equipment s

Graduate in Civil Engineering and Post Graduate in Information technology. Having over 10 years of experience in Marine Civil Construction projects internationally.

Machinist,C.N.C. / Manual 20+yrs. experience

Chemical Engineer, Project and Quality-Security-Environmental Management

34 years in instrumentation industry.

Class 1 Drivers License, High School Diploma, Fortlift, Variable Reach( Zoom Boom),Confined Space Entry,Ground Disturbance Advanced, Standard First Aid- Level A CPR, H2S ALIVE, OSSA, CSTS, Q Endorsment( Air Brakes),TDG, WHIMS, Opeator, Oil and Gas, Construction.

Goal-driven & result-oriented Oil and Gas Engineer with a strong mechanical, pipeline, facilities & project engineering background and over five years experience in the E&P industry.

Hardworking, Dedicated, trustworthy and have the ability to work with others. Acquired Bsc in Mechanical Engineering. Reliable, Honest, responsible, work well independently and on a team. Prepared to do extra work and can work during emergencies. Single with an excellent health. I enjoy interact

11 years experience in the field of surveying and believe that my background and experience would make me a valuable asset to any organization that is looking for a hard working, trustworthy, and professional field surveyor

Heavy equipment operator,heavy mechanic,pre-employment floorhand(roughneck) training

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 [ 178 ] 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out