Resume - Project Manager, Mechanical Engineer with 20 years experience in Gas Turbine Ind...

Misco Jobs

Resume #85272

CONTACT INFORMATION:
View contact information...

SUMMARY
Project Manager and Design Engineer with more than 20 years experience in gas turbine and aerospace industry. Solution Analyst in Software Company.

WORK EXPERIENCE

2008 – Present: HPI, llc, Houston USA
Project Manager
Power plants with gas turbine engines development, erection, repair and rehabilitation.
Project manager for mechanical part Karkh Power plant rehabilitation, Baghdad, Iraq contract with USA military administration (USACE). Participate in EPC project between Canadian and Ghana government, design and build cogeneration power plant in Ghana.

2007 – 2008: MXI Technology Ltd, Ottawa
Solution Analyst
Software development for aircrafts maintenance control.
Participate in software development for A330, A380 and business jets.

2002 – 2007: Magellan Aerospace Corp (Orenda Division, Advanced Materials, and Engineering Solutions Department), Mississauga, Ontario
Project Manager / Design Engineer
Project management
Management of the project world's first steam-injected gas turbine engine with water recovering system based on OGT2500 (Aquarius technology).
Duties and responsibilities:
* planning, directing, and managing assigned projects;
* preparation of initial technical requirements for all equipment ranges;
* ensuring that objectives were accomplished in accordance with outlined priorities;
* analyzing results of operations to discover more efficient ways of resource utilization;
* delegating responsibilities;
* developing time schedules;
* negotiating contracts;
* negotiating with customer and power plant equipment vendors;
* reviewing project status reports during each operational phase;
* preparing weekly project status reports for management.
Design Engineer (Bio-fuel project)
Gas turbine power and bio-fuel handling units design for industrial application. Control system algorithm development, equipment selection for OGT2500 Bio Fuel Power Unit. Test programs development. Heat balance calculations for different types gas turbine units for bio-fuel application. ORENDA OGT2500 power generation and fuel handling modules commissioning at ORENDA Mississauga test facility.

Design Engineer (Repair technologies development)
Repair technology development for aircraft gas turbine engines F404, J85, T53, and Allison 504. Tools for turbine parts repair design, drafting, fabrication. T-53 gas turbine engine modification for industrial applications, work with Magellan partner company Mashproekt, Ukraine. Equipment specification for gas turbine parts testing and evaluation development. Equipment selection, ordering, negotiates with vendors.

1990 – 2001: Mashproekt, Nikolaev, Ukraine.
Project Manager Deputy / Design Engineer
The management and supervision of development, design, manufacturing, and testing of Aquarius (steam injected gas turbine with water recovery system) power units. The power output of these units is 5 MW, 16 MW and 25 MW and efficiency 43%…45% ISO conditions.

Design Engineer in COGEN Project Management Group
In COGEN Project Management Group responsible for the COGEN power plant equipment specification preparation, equipment selection, and negotiations with equipment suppliers.
Participation in SPE Mashproekt UGT110 (power output 110 MW) gas turbine design, manufacturing, and development tests.

Design Engineer in turbine department
Gas turbine design Department (gas turbine hot section design: high pressure turbines, low pressure turbines and power turbines). Participation in UGT 2500, UGT 15000 and UGT 25000 gas turbine engines development, design, and manufacturing.

1987– 1990: Gasprom Co, Russia.
Gas Pumping Units Equipment Repair and Overhaul field Engineer.
Team leader maintenance, repair, and overhaul various gas turbines and other gas pumping equipment.

EDUCATION
* 1981 - 1987 - Ukrainian State Shipbuilding Technical University in Nikolaev, Ukraine (former Shipbuilding Institute), Mechanical Engineering Department.
Master Degree in Mechanical Engineering, Mechanical Engineer.
Specialist in marine propulsions with gas turbine engines.
* 1997 - Course of using CAD/CAM CGTech technologies at Selicongraphic's European education center in the Theale, UK.
* 2003 - Course practical application Unigraphics NX, Siemens PLM Software (former UGS) Education Centre, Toronto, Canada
* 2003 - Course design application Unigraphics NX, Education Centre, Chicago, Illinois, USA
* 2004 - Course free form modeling Unigraphics NX, Education Centre, Toronto, Canada
* 2004 - Course drafting essentials Unigraphics NX, Education Centre, Cincinnati, Ohio, USA

TECHNICAL SKILLS
Software Applications:
* Unigraphics NX
* AutoCAD
* MS Office Suite
* MS Project
* MS Visio
* Lotus Notes
* Rational ClearQuest
Operating Systems
* Windows 95/98/NT/2000, Windows XP:

MEMBERSHIPS
Member of the ASME (American Society of Mechanical Engineers)

PUBLICATIONS
* ASME TURBO EXPO 2001, June 4 - 7, New Orleans, Louisiana, USA, 2001-GT-0111
Design, development, and testing of a gas turbine steam injection and water recovery system
* ADVANCED AEROTHERMAL & COMBUSTION TECHNOLOGIES IN ENERGY AND POWER SYSTEMS, US – UKRAINE WORKSHOP, KIEV, UKRAINE, 2001
The "Aquarius" technology: electricity production; power and heat generation; environmentally clean exhaust; all-the-year-round operation, http://www.triacon.org/Events/WS2001/main_en.htm

LANGUAGES
* English
* Russian

SECURITY CLEARANCE:
* Yes (Enhanced)

REFERENCES:
Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6801 to 6850 of 10916)

Go to Search Parameters...

Brief Description

I am candidate who has excellent research and development skills along with good manufacturing experience.

Dec 2002 Shift/ - Board Supervisor. Jan 2002 – Sept 2002. Shift Team Leader / Panel Trainer. June 2001 – Dec 2001 Start-up - / Shift Team Leader. Nov 1991 – June 2001 Panel Board Operator and Lead Operator.

Civil engineering graduate with 13-years of professional working experience as a Senior Document controller in gas and oil industry. A computer literate, familiar with EDMS, QVP and Plantdoc programs used in project documentation.

Profile Total of 6.5+ years of IT experience with 5.5+ years of SAP R/3 experience in ABAP Programming in the functional areas of MM, SD, PP, PM, FI & Payroll.

Proficient in physical and wet chemistry analyses using gravimetric, titrimetric, and spectrophotometric techniques. Computer Software knowledge in HYSYS,MAPLE, ASPEN, HP Chemstation, Microsoft Office, Microsoft NT.

Petroleum Engineer with 6+ years of experience in the Oil & Gas Industry. Specifically in Middle/Heavy Oil. Strong Knowledge in Production Asset Management, ESP and Gas lift Design and Operations, Horizontal and conventional wells, Cyclic Steam Injection and New Technologies for E&P Industry.

Certificates in H2S Alive, W.H.M.I.S., and class 5 airbrakes. Work history includes warehouse work, shipping and receiving, loading and unloading trucks, driving forklifts and pallet drivers, and customer service

Post Applied Document Controller

Main job is Seismic Processing Analyst The main Projects 2D, 3D (land &marine), AVO All Projects works include; pre-stack processing, post-stack Processing ,and migration(PSTM_some Projects) ,Velocity Analysis AND build modules , finalizing these projects by writing the processing reports

Geologist looking for employment in the Oil Industry

Training for Entry Position for Oil and Gas Industry (Floorman), Engineer Degree for Fisheries, Experience working for Major Projects and at the Sea, ourdoors and long hours

I am full confident about the any job of analyzer/instrumenation for detail see my resume

Good research aptitudes intellectual, potential and creativity.

Mechanical Designer Engineer

Profesional Employer with International acknowledge Certification

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

A Health, Safety & Environment (HSE) Professional with more than 12 years of extensive working experience in Oil & Gas Onshore & Offshore Project, LNG Construction, Commissioning & Start Up.

Senior Instrumentation and Controls Technician

Shaped Charge Engineer

Instrument supervisor / technician v exp construction commissioning start up HSE

I have 30+ years experience as a Mud Engineer, 18 years International experience. I have held positions as Country Manager, Ops. Manager, District Coordinator and Fluids Coordinator. I am experienced in all types of Water/Oil/Synthetic based fluids, Silods control and waste disposal.

Navigational skills, Stability, Mangement

Around 8.50 years experience in Electrical/Instrumentation Engineering and Maintenance in the Industrial sector, extensive experience in end-to-end execution of EPC Projects including supervision of Installation, Calibration, Testing, Pre-commissioning, Operation and Maintenance of Plant Instrumenta

I'm Tommon Mathew working with mott macdonald as a project engineer in oman for various oil and gas projects.

Obtain above position in fast growing IT organization offering challenge, responsibility and advancement opportunities while utilizing my best skills in System administration

Bachelor of Agriculture Science (Honors): 1995-1998 Major in Economics U of A, Excellent communication, trouble shooting skills and professional knowledge gained through interaction with public and running own business for the past 3 years.

EDUCATIONAL QUALIFICATION:DIPLOMA IN CHEMICAL ENGINEERING,job at present: SOHAR REFINERY COMPANY LLC, SOHAR, MUSCUT, OMAN,and actively involved in precommissioning and commissioinig activities.i have total 11+yrs of experience in refinery/petrochemical industries.

Electrical Resistivity geophysical investigation (ABEM Terrameter SAS-300), Topographic Survey (SOKKIA SET 5F), Global Positioning System (GARMIN), GIS

Autocad & Inventor Draftsman

I am an instrumantation and control system designer working with FLOUR INDIA , I am a Diploma holder in Electronics engineering , my working exprience is 03 year

Application for QA/QC Inspector job (Ready to work Offshore)

A Well Services company manager with almost 30 years of industry experience; my background includes working in the oilfield service sector with numerous postings in Canada, Russia, China, and New Zealand. Working with teams of talented people to achieve exceptional results is foremost on my list of

Effective knowledge and working with Microsoft windows based software like MS Office (word, Excel, PowerPoint) as well as in AutoCAD.

Management consulting professional with global consulting experience. Proven track record in executing strategy and operations consulting assignments. MBA, CFA Level II Candidate

I have experience on land drilling rigs and would like to obtain an offshore position.

I have completed a 2 year diploma program in electrical engineering technology. I graduated with honours because of my hard working and dedicated attitude.

Petroleum Landman and Abstractor.

Camp Attendant / General Help/ Administration

I am diploma marine engineer Working in Amsa Total solutions Pvt Ltd., as Quality Control for the past three years. I have completed AWS-Certified welding inspector. I have also completed SMAW -4G Welding course. I'm dedicated & highly motivated to accept challenges & pursue perfection in work

A skilled technical professional with influential leadership and management skills. Proven ability to work in the office and work in the field.

B.E. Petroleum, Working in Workover Department

Exploration, Development, Workover, Deviated Well Drilling Supervisor

I'm a Registered Electrical Engineer and experienced Safety Officer for more than 10 years. Presently am working with a US based Drilling Company as Offshore Rig Based Safety Officer in Saudi for their offshore project. I hope with my experience and initiative, I would be able to contribute positive

Professional Geologist with petroleum exploration and hydrogeological environmental experience

Project Manager, Mechanical Engineer with 20 years experience in Gas Turbine Industry

To seek a position that maximizes my knowledge and technical expertise in the field of Petroleum Engineering & technology, Electronic mechanic, Computer system application, electronic device assembly and trouble-shooting, Design & process engineering.

Offshore Field Engineer with 2 years experiance in shypyard and 3 years onshore/offshore.

Degreed Petroleum Engineer, Production, Workover, Completion, Planning, Programming, Procedure Writing, over 20 years hands-on experience, Field Supervision, Mentoring Local Staff, Excellent Communication and Human Skills, Good Overseas exposure, Adaptable to most current software and applications.

Piping design engineer having 4 experience in ,PDS,CADWORX 2008 AUTOCAD 2008.

Power Engineer 3rd class

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 [ 137 ] 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out