Resume - Process modeling simulation using "ASPEN HYSYS".,Pipe line design, sizing and op...

Misco Jobs

Resume #85424

CONTACT INFORMATION:
View contact information...

B.Tech(Chem)

Personal Data:
Date of Birth: 25/02/1981
Marital Status: Single
Nationality: Indian

1.0 CAREER OBJECTIVE

„« Looking for a suitable Challenging Position in the field of Chemical engineering especially in ¡* Process/piping field¡¨ with an EPC/Chemical/Oil and Gas company (Offshore/Onshore).
„« To work hard and achieve "Chartered Engineer" status.
„« To work in the field, which employs challenges in process design, project implementation, plant startup and shutdown activities.

2.0 SKILLS

„« Process modeling simulation using "ASPEN HYSYS".
„« Pipe line design, sizing and optimization with relevant safety requirements.
„« Exposed to the use of CAEPIPE software.
„« Knowledge of Codes & Standards
„« Calculation of Heat and Material Balance.
„« Mass & Heat Transfer operations.
„« Effectively Monitoring, Optimizing, Trouble shooting the Process units

3.0 WORKING EXPERIENCES

I. GULF EXPERIENCE

„« Name of the Organization: International Mechanical and
Electrical Contracting company, Abu
Dhabi, U.A.E, www.imeco.com

„« Designation: Chemical engineer for reverse osmosis
Plants.

„« Work Site: Marfa site

„« Client: Abu Dhabi Western Region
Municipality

„« Job Highlights: Operation and Maintenance of Reverse
Osmosis plants.

„« Duration: 16th Feb. 2007 to till date

II. Name of the Organization: Membrane Hi-Tech Limited,
(A division of CHEMFAB ALKALIES Ltd.,)
Chennai.

„« Designation: Shift Engineer in Waste Water

Treatment Plant (UF Section).

„« Work Site: C.P.C.L(Chennai Petroleum Corp. Ltd.,)
Site Zero Discharge Plant
(O & M by Membrane Hi-tech Limited)
Manali-Chennai.

„« Job Highlights: Preparing daily performance activities by monitoring plant, by studying the daily reports and by revising the previous shift activities and high light the abnormalities and suggest corrective actions for maintaining the Process
Standards.

Controlling the process parameters through PLC and VFD Operated Ultra
Filtration Unit,

Preparation of Daily and Monthly Production Details

Maintaining of Shift Log sheets.

Cleaning of UF membranes.

Checking the SDI values.

Trouble shooting in pumps.

„« Duration: Jul 2005 to Aug 2006.

4.0 EDUCATIONAL QUALIFICATION

„« Course:

Completed Chemical Engineering in FIRST CLASS with an overall C.G.P.A of 7.07 in may 2005 at Shanmugha Arts, Science, Technology & Research Academy (SASTRA UNIVERSTIY), Thanjavur-INDIA.

„« Course:

Certificate course on ¡* Advanced process modeling using ASPEN HYSYS¡¨ at ASPEN TECH Ltd., PUNE-June 2008.

„« Course:

Certificate course on ¡* Piping Engineering" at IIT -Bombay-May-2008¡¨.

5.0 TRAINING UNDERGONE

„« In-Plant Training undergone at PREM CHEMICALS LIMITED during Diploma.

6.0 PERSONALITY TRAINING

„« Undergone FEEL Employable programme by AIM INSIGHTS, the HRD Group-Mangalore conducted at SASTRA UNIVERSITY, Thanjavur.

7.0 COMPUTER PROFICIENCY

„« CAEPIPE -Piping design software
„« A course on ¡* VISUAL BASIC, MS OFFICE¡¨ at SASTRA
„« Languages known ¡* C Programming¡¨.
„« Operating System ¡* Windows 2000 and XP¡¨.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7651 to 7700 of 10816)

Go to Search Parameters...

Brief Description

B.SC.Mech.Eng., Welding Eng., Project Manager

Skilled MSc ME, specialization Control Systems and Mechatronics

Proven track record of ten years in Senior Management pertaining to broad base Logistical Support, Marine Control, Supply Chain Management, Procurement, and Warehousing fields I have met exacting deadlines of delivery ensuring continuum of multi-million contracts.

1 year experience in CAD package - Unigraphics NX at General Motors.

Summary of Experience

Experience in piping design/layout for industrial, refinery, petrochemical and power plants using CAD soft wares such as PDS, Microstation and AutoCAD.

My drilling fluid experience and Petroleum Engineering background has encouraged me to study numerous facets of the Oil & Gas industry.

Mechanical Engineer, pipe stress, pressure vessel, compress, caesar

1) Graduate in Mechanical Engineering with 12 years experience in Construction Planning in the power, petrochemical, oil & gas, chemical and industrial sector 2) Proficient in Primavera, MS Project, 3) Strong project management, technical, communication and leadership skills

Ten years experience in Mechanical engineering / Project Engineering of EPCM companies.

International civil engineer with fluency in English, German, and Spanish language, with exprience in construction (supervision and design) of power plants, oil & gas projects, infrastructure projects (sewage plants), and dams seeking for jobs worldwide

Geophysicist Seeking a challenging research position in the field of Geophysics where I can prove my capabilities.

I have eight years experience in major civil works projects such as,bridges and metro rail projects.

Software engineer

Skilled in PVR, Roughneck PM, Smart Alek, great written and communication skills, ability to troubleshoot and take corrective action on projects, Extensive background in the design, installation and service of satellite communications equipment; VPN, VoIP, networking and great computer knowledge.

I am HSE professional having work experience of chemical industry and drilling , my education level is masters also completd courageous leadership course in health and safety,management of change, IOSH managing safely,ISO internal audit course,OSHA 18001 internal audit course.

Document Controller, Coordinator, Hr, Admin, IT

High-energy administrative, dependable professional with good judgment and wisdom. Excellent knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, HR information systems, human resources modeling, leadership technique,

Over 17 years of rich & effective experience in Instrumentation maintenance of DCS based controls & instrumentation. Core competence in installation & commissioning field instrumentation, design & logics/programming of DCS / PLC- Honeywell make & Modicon make

QC, NDT, PIPING & WELDING INSPECTION, RTFI, MT, PT, PMI, FERRITE NO,H ARDNESS TESTING, PWHT, PRE HEAT, HYDO/PNEUMATIC TESTING, LINE CHECK, FABRICATION, ERECTION,C OMMISSIONING

International Project, Construction, and Contract Management

Focused well-defined skills in engineering, program/project management, industrial and commercial construction, financial systems, profit and loss, proposals and negotiations.

I am a dedicated and hardworking Materials Coordinator / Controller with an excess of 10 years experience in oil and gas industry.

CV_Ainur Sharipova

Welder Helper / Rigger

Enviromental Geological Engineer and Regulatory Affairs Manager

Recruitment Specialist/HR Generalist

I am an environmental professional with 20+ years of experience in private industry, county government and non-profit marine research. Areas of expertise include management and development of technical and non-technical staff; development of outreach programs, budget planning and management.

M.Sc. (Geology),Reservoir Simulation, PVT analysis, EOR, WSO, Data Management, Reservoir Field Operations, Well Test Analysis, Material balance, Field monitoring.

Experience in handling and Interpretation of Satellite images (LISS and PAN) Working knowledge of ICP-Atomic Emission Spectrometry, Xraydiffractometer (XRD), Digital Spectrophotometer and Digital Flame photometer. Detailed field works carried out in the preparation of Hydrogeomorphology and St

Senior Planning Engineer - 13 years Oil&Gas experience

Strongly involved in pollution prevention, management and control. Participated in pre-treatment of drilling oily wastewater/mud waste treatment in Agip-Saipem Rig -23. Presently exhibiting level 1 standard in Environmental protection. Good knowledge of design/fabrication of engineering facilities

Telecommunication, Health, Safety, Environment and Security Coordinator

Oilfield trucks mechanical technician

ASE CERTIFICATIONS: Drive Train / Engine Repair / Manual Drive Train / Axles / Suspension / Steering / Brakes / Fuel Line Distribution / Heavy / Medium Truck Technician.

Power Engineering at Grande Prairie Regional College, Pipefitting, Equipment Operating, Welders Helper, Willing to start at any entry level position, take any training required. Hold all tickets.

Field Technician

I have long work experience in both tech and service related positions. Such as liner man on the countryside, - an all-weather work, -digging and raising telephone piles. Connecting telephones and represented company in peoples homes.

Geologist

Project Engineer (Instrumentation & Control)

System Administrator, Server Support, Network Administrator, Desktop Support, ADS, DHCP, CCNA, MCSE

Process modeling simulation using "ASPEN HYSYS".,Pipe line design, sizing and optimization with relevant safety requirements,Knowledge of Codes & Standards, Piping engineering

Construction Electrical and Instrumentation Engineer

Geochemical analyses on, and interpretations made for, source rocks and oils; biomarker interpretations; 1-D basin modeling

Qa/Qc Inspector

3 + Years of experience in petrochemical industry-Electrical Engg

Marine mechanical engineer with good HSE and safety asspects

Petroleum Eng., Reservoir Eng., Highly Computer Skills, OFM Program and Eclipse Simultor, Well test Analysis, Open &cased Hole Logs Interpretation

Trouble-shooting and responsible to develop, coordinate and implement maintenance projects, understand customers, competitors and suppliers, from both an information and strategic viewpoint. Developing and mentoring technicians and also provide support for hardware and software maintenance.Exp:4yrs

First Prev 151 152 153 [ 154 ] 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out