Resume - Extensive experience on drilling as Wellsite Supervisor, Senior Well Engineer, W...

Misco Jobs

Resume #85504

CONTACT INFORMATION:
View contact information...

Nationality:
Turkish

Qualifications:
Bachelor of Science in Petroleum Engineering - METU Petroleum Engineering Department, Ankara, Turkey - 1989-1993

CAREER HISTORY
Senior Well Engineer-Team Lead July 2009-Present
Schlumberger IPM Hassi Messaoud, Algeria

Being a degree qualified WSS, decided to go back on engineering where I proved that I can integrate design-execute-evaluate cycle. Well supported internally and by client. Main responsibility will be automation of drilling process, on opportunity evaluation.

Wellsite Supervisor April 2006 – July 2009
Schlumberger IPM Hassi Messaoud, Algeria

A Performance improvement contract. 4 rigs in Hassi Messaoud area. Deep wells, total losses at top hole, high pressure shales and salt water flow, complex reservoir character. Loss-kick cycles. Hard rock drilling. Long radius horizontal wells in excess of 800-1000 m drain. Implement complete QHSE system from scratch. No LTI over 1.5 years. Additionally drilled 4 exploration wells in different areas with same complexity. Last exploration well 9 days ahead of curve beating the best performance among 300 wells in area. Received IPM Personnel Pro Award Q1 as per excellence in execution from Headquarters. In absence of Superintendent and Senior Well engineers sit in place many times. Prepared risk register and contingency planning on exploration wells. Received many congratulations from client and internally. Mentored Junior engineers of Client and IPM over 3 years. My mentees are top performers in courses and Client Junior Supervisors are standalone supervisors in exploration wells. Recognized as SETC Senior- A Schlumberger system for recognizing lead technical contributor in a project or sub geomarket level. Made technical engineering presentations to client

Lead Drilling Engineer April 2002-April 2006
TPOC Libyan Branch Tripoli, Libya

Assisted the drilling manager in the preparation of contracts for services, material planning, AFE analysis, tender preparation and evaluation. Prepared detailed drilling budgets and tender documents for third party services. Also, evaluated and negotiated contracts as a team member and was required to follow up the material procurement, drilling performance and AFE; actual against planned. Furthermore, requirements of the position included the coordination of main service contractors at the rig-site, and the supervision of operations from office. Completed two wells to 11800 feet and 11350 feet respectively in NC 188 concession, saving 15% in well savings from the approved budget in the first well, and 20% in the second well. In addition, worked as acting operations manager during off times. 3 exploration concessions very remote to office 400-1200 kms. NPTs well below targets.Covered Superintendent position as well.

Turkish Petroleum Company December 1999 - April 2002
Turkey

Lead Drilling Engineer November 2001-April 2002

Worked as a lead drilling engineer in TPOC's offices in Ankara as a member of the drilling team for an upcoming Libya project, and assisted the drilling manager in all phases of preplanning.

Drilling Engineer December 1999 - November 2001
Turkey

Worked as a drilling engineer at base for Adiyaman district wells. The role involved the organisation of rig moves and crew, and the planning of long and short term material and equipment according to annual drilling programmes. Furthermore, requirements included the coordination of repair and maintenance of F200 and F300 Romanian rigs.

Drilling Engineer April 1999 - December 1999
TEPCO LLC Kazakhstan

Worked as a night drilling supervisor as a member of TEPCO (A BP Amoco-TPOC joint operating company) drilling team. The responsibilities of the position, before spud, were the planning of AFE and drilling programme with team, and responsibilities at the rig-site included the supervision of night drilling operations, preparation of daily reports and making cost analysis according to AFE, as well as planning logistics and training local engineers.

In addition, drilled a high H2S risk well to 3500 m with no major problems and within the expected AFE, and supervised contractors from 16 different nations.

Drilling Engineer April 1999 - December 1999
TEPCO LLC Kazakhstan

Worked as a night drilling supervisor as a member of TEPCO (A BP Amoco-TPOC joint operating company) drilling team. The responsibilities of the position, before spud, were the planning of AFE and drilling programme with team, and responsibilities at the rig-site included the supervision of night drilling operations, preparation of daily reports and making cost analysis according to AFE, as well as planning logistics and training local engineers.

In addition, drilled a high H2S risk well to 3500 m with no major problems and within the expected AFE, and supervised contractors from 16 different nations.

Drilling Engineer-Drilling Supervisor September 1998 - April 1999
Turkish Petroleum Company Turkey

Worked as Drilling Engineer for Adiyaman and Batman District wells and supervised drilling contractor operations which were conducted in development wells.

Drilling Engineer May 1998 - September 1998
TEPCO LLC Kazakhstan

Seconded to TPAO for TEPCO as a member of the TEPCO drilling team. Pre-qualified all of the contractor rigs in Kazakhstan. Prepared a report for the operating committee, the tender documents for rig tender, and the final report and evaluation memorandum for Management of TEPCO. In addition, evaluated the bids for TEPCO.

Drilling Engineer-Wellsite Supervisor November 1995 - May 1998
Turkish Petroleum Company Turkey

Worked as a drilling engineer in various districts within Turkey. Drilled wildcat wells down to 4300 meters and gained experience on solving shale, high pressure, and unconsolidated zone problems. Supervised varying fishing operations and gained experience on lignosulphanate, salt saturated, oil based and polymer mud. Furthermore, worked in many severe loss circulation wells, drilled medium to long radius wells with directional drilling companies such as Becfield and Baker Hughes INTEQ, and supervised many mounting and demounting operations mostly on Romanian rigs like F-200 and F-320 and American rigs like Emsco 350-550 and National.

Protocol Officer August 1994 - November 1995
Turkish General Staff Turkey

Completed the compulsory military service as Protocol Officer at Chief of Turkish General Staff (TGS). Prepared detailed official party visit programmes for several Chief of General Staff of various countries.

Drilling Engineer-Wellsite Supervisor October 1993 - August 1994
Turkish Petroleum Company Turkey

Worked as a drilling engineer and supervised mostly appraisal and wildcat wells in the Adiyaman district, also worked as a company man for Arco-TPAO joint venture in Ozan Sungurlu field. Drilled long to medium radius directional wells with Sperry Sun, Becfield and Baker Hughes INTEQ directional drilling service companies.

TRAINING / CERTIFICATES

Trainee Engineer Programme, Mobil, Batman-TURKEY
Trainee Engineer Programme, TPAO Production Group ANKARA-TURKEY
Orientation Training on Drilling Operations VARIOUS
Drilling Fluids Course, TPAO Research Group-ANKARA-TURKEY
H2S Training, Total Safety-AKTYUBINSK-KAZAKHSTAN
TRUE Training, BP-Amoco Team AKTYUBINSK-KAZAKHSTAN
Innovations on Cementing Technology, Schlumberger TRIPOLI LIBYA
PDC Bit Technology, Reed Hycalog,TRIPOLI LIBYA
IWCF Well Control Certificate-Surface BOP Stack)
PWC-IPM Well Control, Slb IPM,DUBAI,UAE
IPM STUCK PIPE PREVENTION,MUSCAT-OMAN
QHSE FOR MANAGERS,TUNIS-TUNISIA
Various QHSE courses. List available upon request

MEMBERSHIP

Member of the Chamber of Petroleum Engineers, Turkey
Member of Middle East Technical University Graduate Club, Turkey.

LANGUAGES

Turkish; Native
English; Fluent
French-Arabic; Basic
COMPUTER SKILLS

Can use all kinds of windows applications word, excel, powerpoint
Schlumberger Drilling Office suite to cover all drilling applications

TECHNICAL PAPERS

"Effect of Perforation Phasing on Pressure Drop Along Horizontal Wells." Offshore 93 Student Paper Contest. Aberdeen, Scotland. September 1993.

"Selection of Drilling Contractor at Kazakhstan." 13th Petroleum Congress. Ankara, Turkey. June 2001.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 10902)

Go to Search Parameters...

Brief Description

Highly experienced and successful management professional with a demonstrable record of accomplishment; currently seeking a challenging role, within a multi national environment. Offer a range of transferable skills within the areas of strategic management, business process re-engineering, etc

Foreign Exploration Country Manager, Oil Exploraton

Well completions & workovers. Sand control, stimulation. Domestic & international. Onshore & offshore.

Petroleum Engineer with postgraduate studies in System Engineer and Operations Research, over 20 year of experience, working in projects in Peru, Venezuela, Brazil and Argentina, in Offshore and Onshore areas. Involved in secondary, pressure maintenance and horizontal wells recovery projects.

Total 18yr of experience in Piping FEED, Design and Detailed Engineering, Having good expousure of 3D engineering software.

Seismic data processing /reservoir simulation software developer

19 years Experience in Instrument during construction, commissioning, start-up and Maintenance in many different Oil & Gas, Refinery and Petrochemical Projects

PDMS Administration

Civil/steel structure supervisor

Extensive experience on drilling as Wellsite Supervisor, Senior Well Engineer, Wells Superintendent

Project Management

Control Systems Specialist

17 years of post qualification experience in Detail Engineering of Pressure Vessels (Oversized & Shop Fabricated), Reactors, Separators, Drums, Columns, Spheres, Tanks (Storage & Low Pressure), Flare Stack, Vendor Packaged Equipments, Emergency Diesel Generator and Overhead Cranes

Instrument supervisor / foreman

Highly Experienced Well Site Supervisor.Underbalanced High Pressure HighTemp Deep Horizontals

Thirty years experience as a drilling supervisor for an major international operating company. I have an Associate degree in Petrouleum Technology. I am currently consulting in Oman on a land exploration well. I have over 20 years international experience.

Certified Production & Inventory Management professional

25+ years experience in electrical/control system design for the petrochemical industry. Additional three years experience in civil engineering. Experience has included electrical/instrumentation design to NFPA, NEC and ISA standards, field engineering, as well as managerial experience and CAD.

Drilling fluid superintendent / supervisor ( mud, cement, waste management)

I am a knowledgeable Mechanical/Piping Designer with Project Engineering experience, capable of increasing degrees of responsibility.

I have twenty five years of piping design, 10 years of project leading with in the piping group, shop fabrication & field construction c/w PDS & AutoPlant soft wear experience. I have US work experience & posses a valid Social Security card.

Offering more than Fourteen years of Experience in Marine, Offshore, Oil & Gas Industry with a wide variety of projects involved in Electrical & Instrumentation Disciplines. Acquire extensive knowledge in a broad range of Computer programs & other Various E & I Engineering Field

Expert in managing conglomerates and applying strategic planning and control instruments

Instrument / Controlsystems Engineer

Driller / Tool Pusher (Onshore / Offshore)

Geologist geophysicist interpretation

EPCM Project Contracts Interface (Client-EPCM-Subcontractors)

Emergency Management professional with 28+ years of combined experience; managing teams, providing technical expertise and leadership in programs, projects, operations, and training; in both Fire Services, Training Academy’s and the Petrochemical Industry

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

To obtain a challenging position with an engineering firm where I can use my relevant skills and experienced as Interface Design Coordinator / AutoCAD Supervisor and be a contributing member in the growth of the company. Willing to work as a key player in challenges where I can put my committed atti

I am capable of achieving organisation¡¦s objectives and organic growth through effective contributions. I have over 13 years of experience in the areas of Health, Safety & Environment Management

Maintenance Supervisor/Security, Maintenance Supervisor/ I&C, Project Manager

20 years fire fighting experience.Now working in ADNOC Off Shore facility

Having 23 years of sound experience in piping and equipment design for Onshore / Offshore Oil and Gas, Petrochemical and Chemical Industries.

24 Years of experience in Piping/ Pipeline Design Engineering for Oil & Gas of Onshore and Offshore facilities.

Experienced land professional with a strong background in all phases of petroleum land management. Proven expertise in a variety of situations, as well as proven leadership skills as demonstrated in Land Manager positions with two companies and as an independent lease broker utilizing the services

Structure designer is make development basic design from engineer to make engineering drawing with make details, sections, connection types and discuss with other department like piping, civil, mechanical etc to make problem solve in engineering design or site.

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

25 years Petrochemical / Oil Process Operations Including 10+ years in Supervisory / Man Management positions Commissioning and Start-up Assignments (Overseas)

Team Leader Const/Maint. Oil/Gas Ind.Experienced in planning/execution of projects ,procedures , method statements , permit systems , progress rep. , reviewing change orders, QA/QC and HSE standards. Running multicultural workforces coordinating disciplines and subcontactors.

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Petroleum Geologist, having more than 22 years of experience. Presently working with Oil And Natural Gas Corporation Limited, India at Mumbai. Well versed in both development and exploration of hydrocarbon.

Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken

Over 14 years E & P and Service Industry technical experience with proven records of project deliverables. strong technical background as a Geoscientist, i.e.; Production and Development Geology, 3D reservoir modelling, Integrated Field Development study & Field Reviews.

More than fifteen years Experience, working with consulting engineering companies in Iran and Canada, with different assignments in variety of projects including EPC, R&D, master planning and feasibility studies

I am a professional process engineer with over 15 years experience

Free! Health, Safety & Environment Manager - Crane Inspector - OHSAS 18000 Lead Auditor - Senior Trainer - HSE Master Degree

Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out