Resume - Process Engineer - Oil&Gas - Sulphur

Misco Jobs

Resume #85551

CONTACT INFORMATION:
View contact information...

Personal data
Age: 31
Date of birth: October 20th, 1977.
Nationality: Argentine.
Married without children

Work experience

Techint E&C (Argentina) – Process Engineer

December 2008 – March 2009
Camisea Project (Pluspetrol Plant, Perú): As part of the owner engineer group for Pluspetrol I was involved in:

Ethane Recovery Project Conceptual Study where several alternatives were studied and evaluated using Aspen KBASE and in-company cost data.

Malvinas Plant debottlenecking study where the plant off-sites were analyzed and recommendations made to cope with future expansions. Additionally the Slug Catcher was studied to understand current limitations for future expansions.

June 2008 - November 2008
Nitrogen Rejection Unit (NRU). Client: PEMEX. Ciudad Pemex, Tabasco, México:
Two trains of 315 MMSCFD each (Licensor: Costain) at the time the largest installed capacity in world.
Performed Dynamic Simulation (Aspen Hysys Dynamics) to optimize plant control and improve control loops design and tuning. Train # 2 start up: site process engineer during initial start up, covering cool down of plant and liquids generation. Plant operation: Using dynamic simulation and equipment data, plant variables were optimized to prepare the unit for the performance test. Performance Test: Participated in the plant performance test, preparing reports and adjusting design simulations with plant data (The performance test was passed successfully).

December 2007 – January 2008
Camisea Project (Pluspetrol Plant in Cuzco, Perú): Developing of startup procedures, working together with plant operations personnel, for a liquids recovery plant (Depropanizer and DeButanizer).

April 2005 – December 2007
Sulfur Recovery Unit (Petrobras Refinery in Bahia Blanca, Argentina):
Three stage Claus Unit with a BSR-MDEA (WorleyParsons) type tail gas and a DGAASS degassing unit (Goar Allison and Associates) for treating the produced sulphur.
Participated together with SuplhurExperts' technicians and engineers in capacity determination.
Detail engineering, utilities and equipment design. Held P&ID reviews meetings with licensor (Parsons in Arcadia, EEUU). Participated in Hazop meetings with client (Petrobras) and technology licensor (Parsons).
Equipment inspection and pre-commissioning during construction and commissioning of the unit
Start up: As a Process engineer I was in charge of start-up, coordinating tasks between the client and the licensor. Also was in charge of operator training.

April 2005 – December 2006
Sour water stripper (Petrobras Refinery in Bahia Blanca, Argentina) (Project still ongoing): Basic & detail engineering - Equipment inspection, pre-commissioning, commissioning, start up and troubleshooting - for the unit's revamp (The revamp consisted in turning a non refluxed SWS into a refluxed SWS).

August 2003 – February 2004
Depentanizer Unit (Enap Refinery in Talcahuano, Chile): Detail engineering involving consistency check of basic engineering documentation of a depentanizer unit provided by Axens. P&ID's completion, equipment data sheets, flare system design, utilities design.

August 2003
Technical assistance for a wastewater plant at company owned steel mills.

Software used: TSWEET, HYSYS, HYSYS DYNAMICS, PROSIM, Promax, AUTOCAD, HTRI, HTC, B-JAC, ICARUS KBASE, ICARUS IPE.

CHEVRONTEXACO (Argentina) – Drilling Engineer
March 2004 – March 2005
* Work at the drilling engineering department, well planning for 100 development wells. Directional and conventional drilling.
* Near horizontal well drill string design.
* Technical limit study for development wells.

Tecna Argentina (www.tecna.com) – Process Engineer
June 2001 – July 2003
* Engineering company specialized in projects for the oil & gas industry.
* Conceptual engineering for surface production facilities (British Petroleum, Argentina).
* Flare stacks & KO drums design.
* Flare system conceptual & basic engineering for the largest refineries in Argentina, located at La Plata (Buenos Aires) and Lujan de Cuyo (Mendoza).
* Indirect Heater Study for British Petroleum, Argentina. I Studied efficiency and calculated fugitive emission for the system.
* Conceptual engineering design of a bio-oil production plant for Dynamotive (located in Canada, www.dynamotive.com).

Software used: HYSYS, AUTOCAD, PIPESYS, VISUAL FLARE

Buenos Aires Institute of Technology
 Act as Adjunct Professor of Unit Operations II (Heat Transfer Equipment Design) from 2002 to date and as Professor of Unit Operations I (Fluid and Solid Mechanics for Chemical Engineers) from March 2009.

Education

Postgraduate studies
Postgraduate Course in Crude Oil, Oil & Gas Institute (University of Buenos Aires). Beginning: August 2003 (Not Finished Yet).

Degree:
Chemical engineer. Buenos Aires Institute of Technology, Argentina (1997-2002).

Languages

Spanish: native language.
English: advanced oral, writing and reading.
Portuguese: basic oral, writing and reading.

Software/Programs

Capital Cost Estimator: Aspen IPE, Aspen KBase.
Process simulators: TSWEET, HYSYS, HYSYS DYNAMICS, PROSIM Promax, SULSIM.
Pipeline simulators: Pipesys, ASPEN UPSTREAM, Visual Flare.
CAD: (AutoCAD).
CFD: basics of CFD modelling (Using Ansys CFX)
Heat Exchangers: HTRI, HTC, B-JAC (Thermal)
Others: Excel (Programming), Word, PowerPoint, Outlook, Internet Explorer.

Training Courses & Seminars

* AspentTech User Group Meeting – April 2007 – Made a presentation about "using aspen hysys dynamic as an operating procedure developing tool" based on a study case of a SWS
* Sulphur Recovery Seminar – Bernkastel – October 2006
* Hysys Dynamics – Aspentech Buenos Aires – March 2006
* XXII Interamerican Chemical Engineering Congress – Presented a paper in a poster session "Impact on a refinery by the installation of a new SRU"
* Ansys CFX – Introduction to CFD modelling (2006)
* Pressure safety valves (Tecna. March 2003)
* Pipeline design (Dictated by Guillermo Cordero, Techint 2005)
* Control valves (Techint 2005)
* Actuators (Worcester 2005)
* Pore pressure (Drilling Training Alliance, Houston 2004)
* Extended reach (Drilling Training Alliance, Houston 2004)
* Drillstring design (Drilling Training Alliance, Houston 2004)
* Wellbore stability (Drilling Training Alliance, Houston 2004)
* Corrosion in wells and surface facilities seminar (Neuquen 2004)

References
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5451 to 5500 of 10917)

Go to Search Parameters...

Brief Description

I have the drive and the dedication that will bring a positive force to my position. My experience as an acid/cement operator has given me a vast knowledge of variety of different field operations. The knowledge I gained from SAIT has allowed me too bridge the gap between the office and the field.

i am a coiled tubing superviver

skills: analysis of cores from drill cuttings,acquisition,processing and interpretation of seismic data. B. Sc Geology, second class honours.. oct 2008

Mechanical engineer specializing in oil and gas pipelines and related facilities. Additional experience with Pulp and Paper and design of Cogen power plants.

5 Years Roughneck, 8 years Mudlogger, and 3 Years Geological Consultant

Reservoir Engineer with 6 years working in the Oil and Gas industry including

Seeking a position with strong emphasis in Industrial Automation & Control System with direct exposure to System Design, Configuration and Implementation where above six years of experience will increase efficiency. Additional skills in Project Engineering and Imparting Training

Oil & gas landman with experience in leasing, lease negotiating and writing, & abstract building.

Completed my BE (EEE) in india (tamil nadu) in the year 2003-2007.i did one year training in the electrical ,control & instrumentation department

Vacation Job for Graduated Mechanical Enginner

I have 08 years experience in QA/QC NDT, and Welding inspection Field.

I POSSESS GOOD COMMUNICATION SKILLS AND I`M CAPABLE OF TEAM WORK.I`M AVAILABLE TO WORK FOREIGN COUNTRIES

I have a good practical knowledge to operate and trouble shoot the following instruments.Spectrophotometer . Gas Chromatograph. Flame photometer. Karl Fischer. Atomic Absorption Spectrometer.Auto Titrator .Flue Gas Analyzer.Ion Chromatograph.Ion selective Electrodes.Viscometer

Operate and maintain all aspects of a continuous process plant. This includes the operation of distillation towers under vacuum and pressurized systems with both trays and packing. Operate centrifugal pumps, hydrogen compressors, and thin film evaporators. Operate and maintain all aspects of a cru

Senior operator diploma of mechanical

Bachelor of Engineering, In Electronics and Communication Engineering , „« Currently Working as a Project Trainee Engineer for Bharat Electronics Limited,

Design Engineer with more than a year experience in basic design in ship buildign and boat building industry

oil and gas shutdown plant inspector and ndt technican

Experienced safety professional and proven leader in the Environmental Health & Safety environment. I've developed and successfully implemented several innovative injury prevention programs which has resulted in millions of dollars saved in Workers' Compensation expenditures.

Bachelor of Engineering (Mechanical)

A Mechanical Engineer with Vast experienced in ISO 9000,ISO 14000,QS 9000 and OHSAS 18000 Systems and experienced in Third party inspection and certification services.

For my 2 years relevant experienced in contracting and other related industries lately job projects in Oil and Gas , I encountered major job aspects in the field of Safety Laws and Regulations implementation internationally wherein I joined the company with the project of Sulf

Quality Assurance/ Quality Control Inspector

Skills in CadWorx P&ID Pro, CadWorx Plant 2008, Microstation V8. 3 years field experiance. 8 years AutoCad Experiance.

S1 Teknik Perminyakan UPN "VETERAN" Yogyakarta, IPK 2.76. Pernah bekerja di bidang IT selama 2 tahun. Saya tipe orang yang sopan dan sabar, cepat belajar, good listening, analitis. Karakter tersebut sangat membantu dalam pekerjaan dan tanggungjawab yang saya emban.

Last seven years working in the field of QA\QC & Non-destructive testing.

Mechanical engineer, fast learner, good communication skills, social and leadership qualities

HSE Management

Technical Competencies: Geological interpretation by well logs, description of cuttings and core analysis, mud/drilling fluids, porphyry and epithermal system, cementing (thickening time, compressive strength, rheology, fluid loss test), knowledge of Directional Drilling and Drilling Engineering ser

Drilling engineer, Drilling supervisor, Mud and Cement supervisor and Mud and Cement engineer

I am Nechifor Cristinel. I worked in power plant, refineries, oceanic platform with different operations for electrical maintenance, commissioning, construction as electrical technician , electrical inspector or electrical supervisor last time.

Project Construction Manager (Fabrication, installation, Offshore Hook-up)

Process Engineer - Oil&Gas - Sulphur - Refinery

Field Engineer with knowledge in petroleum and geology

Diploma Holder, Pdms Piping Designer, Design and modelling on Pdms, Piping Layout, Equipment Layout, Supporting.

Looking for a suitable job in a dynamic organization where opportunities are available to prove my mental responsibilities are challenging and chances to raise are plentiful.

Well rounded in Experience: Well Engineering, Production Engineering, Project Management, Performance Consultant, Completions experience

I have 4-yr degree education, I work more then 11 years in Oil&Gas in different position (tehnician, engineer and supervisor)

BGAS/CSWIP Painting Inspector Grade 2

Chemical plant operator, 17 years experience, 4 years as plant controller.

I have extensively worked with world renowned engineering firm

Effective comminication, Overall understanding of Technicalities pertaining to my day-to-day activities. Reporting to the Project Manager of SNGP (Saih Nihayda Gas Plant) and Associated Facilities. US$ 150 Million Project, for Petroleum Development Oman, being executed as a Joint Venture Project wit

I am presently working as Advanced Process Control Engineer in one of the leading APC company I am having hands on experience of DMC+,AspenIQ,InfoPlus21, Spyro,Aspen Blend and having a fair exposure of HYSYS simulation software. I am a chemical Engineer from India and worked in Oil refinery.

Good relationship with the work friends, easiness of creating friendships, taste of reading, to fish and to do pictures for besides practicing soccer.

I have worked as a Driller and Tour push for the last 27 years.

Coded pipe & pressure vessel welder with valid certification

Construction superintendent/construction manager

Automation, control engineering in industrial plants

Area Maintenance Static Supervisor

SCM Logistics and Materials Managment

First Prev 101 102 103 104 105 106 107 108 109 [ 110 ] 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out