Resume - SUMMARY I have been involved in the Drilling and Work over Industry for the pas...

Misco Jobs

Resume #85553

CONTACT INFORMATION:
View contact information...

NATIONALITY: INDONESIA
PLACE OF BIRTH: Palembang, 22-June -1964
GENDER: MALE
AVAILABLE: SHORT NOTICE
EDUCATION: SENIOR HIGH SCHOOL

TRAINING COURSE:

1985 DRILLING PROGRAM BY GLOMAR DRILLING COMPANY
1997 ADVANCED WELL CONTROL AT JAKARTA BY PULUNG MAS
2004 AUTOMATIC DRILLING SYSTEMS AT HOUSTON TEXAS.USA
2006 DIRECTIONAL DRILLER I-II. IN HOUSTON TEXAS.USA.
2006 SURVIVAL HUET BY SAMSON INTERNATIONAL
2006 H2S AT JAKARTA. AND 2008 KDC KUWAIT
2008 SCBA BY KDC KUWAIT
2008 AP III AT CEPU FOR TOOLPUSHER LEVEL LAND RIG
2009 FIRE FIGHTING BY KDC KUWAIT
2009 WELL CONTROL IWCF VALID 2011. LEVEL SUPERVISOR

SUMMARY

I have been involved in the Drilling and Work over Industry for the past 26 years. With experience on Tender and Drill Ship & land rigs, both Mechanical and Electrical, ranging from 6,000 to 20,000 feet, as well as Sea crest and Eastern Queen off-shore Indonesia. I have worked in various locations around the world, including, VIETNAM, SUDAN, KUWAIT SAUDI ARABIA.OMAN, Indonesia, Desert Drilling and Walkovers Kuwait. Also worked with KDC. As a Sr.Rig Manager, Rig Superintendent in Petro china Indonesia. Specializing in under balanced Drilling, both vertical and horizontal wells, gas & oil wells. Using a number of different flow régimes. Including Nitrogen, Natural Gas, Methane, Water, Diesel, Have been involved in New Drills.
I have held the position of Drilling Supervisor In Sudan and Vietnam, to prepared logistics in remote locations. Worked on horizontal/directional wells, experience working on remote locations. Held the position of Directional Driller for W'ford for an Exploration company drilling, HPHT well in a semi remote location in Indonesia.
I can work with both metric and standard units fluently.

Familiar with MS. Office (Word, Excel, PowerPoint and Email);. good working knowledge Of the English language

EXPERIENCES OF JOBS:

2008 - 2009 Work in KDC Kuwait as a Sr.T.Pusher Land Rig 2000 HP Cyber Rig
Job Description: Work at Rig Site supervising Drilling Operation, safety, crews and logistics
And daily reporting. Report to Co man and Drilling Superintendent

2007 - 2008 Work in Saudi Arabia for Parker Drilling Land Rig as a Sr. Rig Manager Cyber Rig
Job Description: Work at Rig Site supervising Drilling Operation, safety and crews and logistics
And daily reporting. Daily reporting.

2007 - 2007 Working in the function of Drilling Supervisor for WNPOC SUDAN
Job Description: Supervising Drilling Operation, Control Well Depth, Safety, Environment, Cost control
Prepared Logistics for Starting Drilling and Control Mud system and Tripartite Contractor

2005 - 2007 Working in the function of Directional Driller Supervisor for Weatherford International
Job Description: Make it BHA Design, Supervising While Drilling, Control Well Depth and Parameter Mud
System Well Plot and survey

2003 - 2004 Working in the function Drilling supervisor in Petro Vietnam Investment –Thai Binh Vietnam.
Well Depth 9000-12000 FT. Exploration and Development Well.
Job Description: Supervising Drilling Operation, Control Well Depth, Safety, Environment, Cost control
Prepared Logistics for Starting Drilling and Control Mud system and Tripartite Contractors.

2001- 2003: Work at Petrochina Indonesia as a Night drilling Supervisor for land Drilling Rig International Jambi. Indonesia.
Job Description: Work with Night ship at the Rig site to supervise crews rig operations, safety and cost control. Mud, well depth and parameter while drilling, assist of drilling supervisor.

1999 - 2001: Work at Sinopec as a Rig Superintendent on Land Rig 1500 HP. China rig ZJ 50 Electrics System. For Petrochina Indonesia
Job Description: Work at the Rig site to supervise crews rig operations, safety and cost control. Prepared equipt

1997 - 1999: Work at PT. INPETRO as a Rig Superintendent on land operation with Land Rig.National 610.1000 HP. Duri field CALTEX. Indonesia
Job Description: Work at the Rig site to supervise crews rig operations, safety and cost control. Prepared Equipment

1995 - 1997: Work at PT. PULUNG MAS as a Sr. TOOL PUSHER for Work Over Drilling Land rig #09 Bow Valley. South Kalimantan
Job Description: Sr. Toolpusher in charge of drilling and logistics operations.

1993 - 1995: Work at HUGHES TOOL CO as SALES SERVICE ENGINEER for Tri Cone Drilling bits.
Job Description: Promotion, sales of Drill Bits and services to customers in the oil & Gas industry in Indonesia.

1991 - 1993: Work at PT. MEDCO E. KALIMANTAN as a Toolpusher on Drilling Land Rig # 05 VICO Badak Field.
Job Description: Work at Rig Site supervising Drilling Operation, safety and daily reporting.

1987 - 1991 Work at Sea crest offshore Drill ship as a Driller.
Job Description: Work at Rig site / Rig Floor to supervise floor activity while drilling, maintain drilling parameter, mud, safety and report to Tool pusher

1985 - 1986: Work at GLOMAR OFFSHORE DRILLING COMPANY as a Assist Driller on Rig Grand Easel #125. TOTAL INDONESIA E. KALIMANTAN.

1982 -1985: Work at PT. TIGA PUTERA KALTIM as a Roustabout - Derrick man for MEDCO RIG #01.

If more information is required don't hesitate to contact me. References are available on request.

Can Operate Any Top drive like a: TESCO, VARCO

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1651 to 1700 of 10816)

Go to Search Parameters...

Brief Description

A qualified mechanical engineer having a litany of professional courses with 11+ years of extensive track record in heading key engineering divisions and technical operations/maintenance, across diverse geographical locations in the Oil & Gas industry, seeking a managerial/engineering position with

“Petroleum and Gases” University Ploiesti, Romania

To obtain the position of Instrumentation Technician/Production Operator.

Over 6 years of experience in analysis and design of steel and concrete structures

Engineering Graduate( B.Tech. Chemical Engg. – 4 years degree course) with 16 ½ Years Experience in Work Over Operations / Supervisor / Completion

Presently working as Safety Engineer (Contract Hire through agency) for Abu Dhabi National Oil Company, ADNOC- Abu Dhabi, and U.A.E from March 2006.

15 Years Geospatial Experience. Oil/Gas, Pipeline Design/Engineering, Land Management, Geospatial RDMS

I am an Instrument Designer with more than 25 years experience, predominantly in the Oil and Gas Industry. I have extensive supervisory experience in multi-discipline and multi-national working enviroments.

Lead Auditor - ISO 9001:2000 Series; CSWIP 3.2 Senior Welding Inspector; CSWIP 3.4 Radiographic Film Interpreter for Group A & B materials; CSWIP - BGas Grade 2 Painting Inspector; 28 years of oil and gas industry experience both onshore and offshore. 5 years Refinery experience as Plant Inspector.

Talented and accomplished Naval Architect with extensive FPSO, FSO Conversion, Ship Design and Shipbuilding background particularly in the areas of trim and stability, strength of ships and ship structures. Proven ability to design FSO, FPSO and various types of ships. Able to liaison between tech

Well established Petroleum Exploration and System Analyst with over 15 years of experience in the international petroleum industry combined with a PhD in Petroleum Geochemistry.

I am a fully qualified and experienced Health, Safety and Environmental professional with 14 years upstream Oil & Gas industry experience working around the world for International Oil companies

Registered Professional Engineer in Ontario, Canada, Mechanical Engineer BSc. & M.Eng.

See resume below for details of career path from a qualified engineer with 5 years offshore engineering to a position of Contracts Manager within Subsea 7 looking after the UK business and providing support to West African projects , managing a team of more than 17 contract specialists

Project Management and General Management Professional

Thirty-two years of successful senior-level public and private sector programme management experience, with a core focus in Community and Social Development, Institutional Strengthening & Capacity Building, Strategy, Local Economic Development, and Small & Medium-Enterprise (SME) Development.

Project /construction director/manager FPFO, Jacket and decks, Modules, loading terminals (shallow and deep water)

Has proven ability in design engineering, fabrication drawing detailing, material quantity estimation, fabrication, and installation & commissioning supervision. Familiar with international design codes, standards, procedures, and engineering practices.

I having overall 11years experiance in production/manufacturing field and currenty looking for better future where i can exploure more my knowledge and experiance.

Highly Skilled and conscientious B Welder/Vessell Fitter for the last 17 years. Dedicated and organized, able to prioritize and meet company deadlines.

Sr. piping design

Dedicated, enthusiastic and diligent individual with excellent organisational skills. I perform at a consistently high standard in a very demanding and pressurised environment. My maturity and professional manner exudes a sense of confidence and calm in a very demanding environment.

Professional Civil Engineer with over 11 years of experience in the oil and gas industry focused in the analysis and design of different types of structures, such as frameworks, pipe racks, bridge trusses, operation platforms, vertical tanks supports and their foundation, and retaining walls.

I have over 30 years offshore experience and of those have worked in a senior position 25+ years, have worked in a senior position on some large scale sub sea completions worldwide, I have very good equipment knowledge and are looking for a shore base position with logistics or projects.

Over 35 years Drilling, Africa, ME, Russia, USA

A geologist with experience in the oil industry involving exploration and development projects in Guatemala South Peten basin, geological information database management, mud logging in oil drilling activities, oil tanks gauging(1996-2004). Logging geologist in USA (Nov 2005-Mar 2009)

I have 8 years of designing experience with a good knowledge of P& ID, fabrication, welding, material selection and manufacturing process worked on the designing software like Auto CAD and Pro/E both in 2D and 3D for almost 5years from concept stage till the mass production of the component.

Seeking mechanical supervisor/mechanic position

Experienced and motivated Ph.D mechanical Engineer

Oilfield Experience 34 years. 33 years with Well Services. I began my career as Well services Technician and my last jobs with Well Services as a Team Leader responsible for Slick Line operation in both Gas and Oil wells.

SUMMARY I have been involved in the Drilling and Work over Industry for the past 26 years. With experience on Tender and Drill Ship & land rigs, both Mechanical and Electrical, ranging from 6,000 to 20,000 feet, as well as Sea crest and

Civil engineer/pipeline precommissioning

multi-disciplined autocad designer

Performing work as per international standards following operational excellence management system

Extensive 20+ year’s professional experience in instrumentation, control and automation for Oil, Gas and Petrochemical industries.

Extensive experience in power, petrochemical and utilities plant startup, operation and training

I have sufficient exposure in dealing with International Audit and Inspection like MCA-UK., U.S.F.D.A., MCC - South Africa, WHO Etc. Man Management is my proven skill for years. Maintain focus on achieving bottom line result while formulating and implementing the advanced technolog and productivity.

To secure a full-time position with an industry leading company world-wide in IT – Manager / Project Manager / Project Coordinator / Senior Planner

Experienced Drilling and DHS Supervisor

M.Tech Geo-Engineering, 9 years of proven industry experience in Geology, GIS, RS, Image processing, QA & Testing, Performance Engineering on Financial, Accounting, CRM, ERP, Retail, B2C Web & Client Server applications like ESRI arcGIS, ERDAS, MapInfo, AutoCAD, Java, J2EE & .Net, Data Warehousing

Perform all oil and gas estings, envirmental testings, wwtp testing, utility relating testing, chemical preprations, well testings, auxlery fireman, first aider, isorelating working, hse relating working, master in chemistry,

Instrumentation and Control - FEED, Detail Design, Construction, Pre-Commissioning, Commissioning

12 Years of Experience in Oil & Gas, Industrial & Construction Safety (HSE Training)

I am senior Information management engineer with 12 years experience in the Petroleum and IT industries. I have a Bachelor of Mathematic / Information technology

I have been working as an executive engineer(inspection) in chittagong urea fertilizer ltd. since 2nd april,1997 to till date.I have to supervise all on-stream and shutdown inspection activities of different vessels,tanks,pipe lines etc to ensure plant integrity &reliability .

Senior HSE advisor

Electrical Engineer, Planner

cartography_gis_mapping_drafting

110KV/11KV substation equipments like Isolators, Circuit Breakers, Current transformers, Potential transformer, Lightning arresters, Neutral Grounding Resisters & Battery charger, etc.

Chemical engineer OCP MCAD

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [ 34 ] 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out