Resume - Maintenance & Mechanical Commissioning Supervisor

Misco Jobs

Resume #85759

CONTACT INFORMATION:
View contact information...

Date Of Birth: 29th January 1970
Marital Status: Married
Nationality: British

PROFILE
Physically fit, safety minded and a mentally active person possessing considerable experience gained with international companies on and offshore in industries such as, mechanical & pipeline commissioning, gas compression, power generation, open cast quarrying and large-scale construction. This is also combined with 4 years service with the Territorial Army (Parachute Regiment). Very keen to find a position offering good prospects and one where my skills, qualifications and experience already acquired may be used to the benefit to an employer and myself.

LANGUAGES: English is my first language and I can also speak very basic Russian which I want to improve on.

EDUCATION, TRAINING AND QUALIFICATIONS

June 08 Sakhalin Energy Permit To Work (PTW) & Permit Authority
SEIC-Shell (PA) course

March 07 BP Permit To Work (PTW) & Permit Authority (PA) course
BP AIOC

06-08 Feb 07 BOSIET – Basic Offshore Survival Induction & Emergency
ETSDC Training

06-07 June 1999 Microsoft Word 97 Introduction
Execu Train

13-14 June 1999 Microsoft Excel 97 Introduction
Execu Train

1987-1990 Diploma in Maintenance & Repair of Construction Institute of City & Guilds Plant Equipment.

1981-1986 CSE passes in mathematics, English language,
Laurence Jackson School Physics and Motor Vehicle Technology.

EMPLOYMENT HISTORY

2008: Hydrotest & Completions coordinator – Shell Sakhalin Energy
Coordination of, caliper runs, hydro testing, dewatering, pre-drying & drying, caliper runs and inerting on both the 48'' and 24'' lines, mechanical commissioning activities at the OPF pig trap station and AGI locations, also assisting with ops going live preparation and handover to operations.

2007: Senior Mechanical Commissioning Supervisor – BP AIOC
I was recruited by AIOC BP in Azerbaijan to assist with the commissioning of Phase 3 of Sangachal Terminal Expansion Program (STEP). My mechanical commissioning activities including raising relevant Permits To Work (PTW) for my crews, overseeing & coordinating with the N2 leaking / bolting contractor, supervision of a 30 man crew of Russians, Pilipinos and locals. Other responsibilities and involvements included plant start-up, controlling the Flash Gas Compressor N2 clean-up runs on both trains, P&ID Green Lining, Tri-Party walk-downs, Comms Punching, Pneumatic Line Air Blows, No Load & Loaded Motor Runs, coupling alignments, belt tensioning, pump & cooler runs and GOC certification from MM1 through to SH1.

2004-2006: Maintenance Supervisor - BJ Services
Returned to BJ Process & Pipeline Services in Baku Azerbaijan. My role included starting and controlling a preventative maintenance program for up to 7,000 BHP of Process & Pipeline commissioning equipment. I also controlled the day-to-day support for their N2 leak testing & Process Commissioning programs, bolt tensioning and commissioning activities, also including base management, procurement and logistic activities and relief work for the Project managers whilst out on leave.

2004: Freelance Compressor Commissioning Engineer.
Worked freelance in Indonesia for Universal Compression Inc (UCI) commissioning two 16V-AT27GL Waukesha engines driving 3 stage JGC-6 Ariel compressors each producing 25 MSCM per day.

2002-2004: Maintenance Supervisor BJ Services
Hands on roll for BJ Process and Pipeline Services based in Kazakhstan. My responsibilities included all day-to-day Base & workshop activities, supporting the daily N2 leak testing, bolt tensioning activities, setting up and running a PM system, controlling the spare part, major rebuilds of several N2 pumps, winterization of all equipment, operational logistics and local and international procurement..

1999-2002: Commissioning / Service Engineer – GSI Weatherford
My normal day-to-day responsibilities included commissioning and start-ups of new and reconditioned reciprocating gas compressors and Waukesha and Caterpiller gas engines. Site visits to trouble shoot & rebuild client owned equipment was a large part of my roll, traveled extensively throughout the Middle East, Africa & Asia commissioning new compression packages supplied by GSI, and on occasion for Universal Compression, undertaking all mechanical, electrical & instrumentation tasks. In the summer of 2001-I Project Managed the remanufacture of two RDS-4 compressors driven by Waukesha L7042GSI engines for Oxidental of Oman.

June 98-Aug 99: Senior Mechanic – BJ Services
Joined BJ Process & Pipeline Services in Dubai. There I supervised all repairs, rebuilds, overhauls & any mechanical or electrical upgrades to all their rotating and nitrogen equipment. My duties also included the day-to-day management and supervision of all the workshop TCN.

Apr 97- June 98: Senior Service Engineer - Aggreko
Recruited by Aggreko Power Rental in the UK. I was then sent to Oman in the Middle East. My function was to undertake all maintenance and repair work both mechanical and electrical on their generator packages. Aggreko had only operated in Oman since September 1996, so I was also responsible for locating suppliers for all electrical and mechanical items required to keep a fleet of generators totaling 25 MVA running. Approximately 50% of my time was spent working in the interior of Oman working alongside PDO providing power to their down hole electrical submersible pumping equipment in remote locations. I also commissioning projects such as 5 MVA synchronized with the grid, and 4.2 MVA synchronized as an island for the local Government.

Dec 95 – July 96: Workshop Supervisor – Steven Rock
Offered and accepted a three month contract with Stevin Rock Joint
Venture in Ras-Al-Khaimar U.A.E. After the completion of this a further three months was offered and accepted. Duties included the organization of manpower within the workshop, ensuring that both maintenance and preventative maintenance and repairs were carried out to the large static and mobile plant equipment. Also responsible for all equipment involved within the 24hr barge loading operations including grabs, shovels, off highway dump trucks and tugboats. Further to this I oversaw the inspection and repair of their tugboats and barges whilst in Dubai Dry Dock for repair.

Feb 95 – Dec 95: Plant Supervisor – Wimpey International
Joined Al Futtaim Wimpey in Dubai working on three major projects.
These consisted of a major roads and interchange project at Karama, the construction of the Deira City Center and an oil tanker berth in the Jebel Ali free zone. I subsequently left Wimpey due to the company take over by Tarmac.

1994-1995: Heavy Plant Fitter – Short Bros Plant Ltd
Subcontracting to Short Bros Plant Ltd in British Steel's Redcar plant in the UK. I worked unsupervised on all aspects of plant equipment used by British Steel and Short Bros such as off highway dump truck, loading shovels, screens and crushing plants.

1987-1994: Plant Fitter – Wimpey PLC & Wimpey International
Four-year apprenticeship in Engineering Plant Equipment Maintenance with
George Wimpey PLC and successfully gained City and Guilds in this discipline Fully qualified and skilled covering the hole of the North East of England. Worked on major projects such as the Enron Power Station caring out on site repairs then went overseas to Jordan where I worked on all plant equipment involved in the construction of a potash treatment plant and supervised up to 40 Indian / Arab Nationals.

Countries Worked in:
Angola, Australia, Azerbaijan, Equatorial-Guinea, India, Indonesia, Jordan, Kazakhstan, Kuwait, Nigeria, Oman, Pakistan, Qatar, Russia, Singapore, Turkey, U.A.E, Yemen.

Territorial Army:
1989-1993 Member of the 4th Battalion of the Parachute Regiment of the Territorial Army. Fully qualified military parachutist and attended and passed courses covering skills at arms and marksmanship.
Left in 1993 due to work commitment in Jordan (see above).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 10816)

Go to Search Parameters...

Brief Description

I am a post graduate in chemistry working as Senior Chemist in KOC.Well experience in crude oil, Gas and Water analysis. Handling of all kind of Lab Instruments,Calibration ,standard chemicals preparation, reports making are the responsibilities.

Lead/Senior Mechanical Engineer- Oil & Gas, Chemical, Petrochemical and Energy Industries

Free! Oil and Gas Industry onshore construction civil engineering Superintendent with 20 years experience in overseas projects.

I am a B.Sc Chemistry degree holder and have totally 24 years of very good experience in PROCESS FIELD / PANEL operations in oil/gas treatment plant. This is one of the biggest oil processing plant in India. SOUTHERN PETROCHEMICAL INDUSTRIES CORPORATION LTD., (SPIC).

Twenty plus year's progressive experience in heavy industrial design, development, and construction for petrochemical refineries, upstream petrochemical, waste water treatment, power generation, chemical demilitarization facilities, Microchip facilities, LPG gas transitions, and the food & beverage

I am very talented and a hard worker. I have a good eye for any type of construction.

Outstanding background of knowledge’s into oil and gas processing and utilities, more then 14 years experience into commissioning and process activities from which more than three years offshore, working into an multicultural team and with all disciplines engineers, proactive and disciplined

24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:

20 years experience. Executive with proven management, operations, P&L management, and business law experience. Communicator, negotiator, and capital raiser. Global, regional, and country specific business expertise.

Challenging job related to oilfield, where I can capitalize on my 23 years of oilfield experience with Schlumberger in management, sales, marketing and contracts negotiations. No geographical preference. No schooling constraints.

20+ years experience in private/public sector contract, program/project mgmt. Domestic & international E&P and technology development with major/independent/service companies. Identified significant oil/gas reserves through innovative mgmt. of multidiscipline teams.

Geophysical modelling Rock physics, AVO, Pre-stack and Post-Stack Seismic Inversion, seismology, reservoir characterization, Interpreted seismic data (3D, 2D) & amplitude analysis using Seisworks, PostStack/ PAL, IESX, and EarthCube. Certified Landmark Graphics instructor

I have completed a BSc in Geology and a PhD in Petroleum Engineering. In the last 20 years working for BP I have worked as a Production Technologist, Completions Engineer, Reservoir Engineer and in Production Operations, both onshore and also offshore on an FPSO, in recent years as a Team Leader.

Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.

Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.

field appraisal, depletion, material balance, well test, reserve estimates, water injection, fractional flow, gas injection, reservoir evaluation, production forecast, reservoir and production monitoring, data acquisition, multilaterals, development projects, reservoir modelling and simulation.

7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .

I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.

Professionally Qualified Engineer / Manager, Harvard Business School Alumni, Certified Project Manager (PMP) - Now In General Management In Oil & Gas Up & Mid Stream

I graduated from Sultan Ageng Tirtayasa University, in Indonesia on October 2004, majoring Chemical Engineering Degree. I have experienced working in petrochemical plant. During 10th years I have ever been worked at PT. Asahimas Chemical Indonesia ( VCM/EDC Plant ) from 1997-2007

City and Guilds Motor Mechanical Technician Diploma and full tech certificate. Languages: English, Arabic and French Spoken fluently

PDS Frameworks, Autocad, Microstation

Objective. Seeking an increasingly responsible position with an opportunity for professional challenge and growth while combining my areas of experience in the field of electrical works to support and enhance corporate goals and objectives. Educational Qualification. 1.Diploma in Electrical Engineer

Trained Radiation Protection Officer & Health Physicist from India

I have sailed as Master on Tankers and have good experience in Oil / Chemical / Gas Tankers.

Skills: •Able to take proper and quick decision. •Very much interested to work in technical environment. •Excellent ability of producing and reading working drawings. •Able to work alone or in team very environment. •Able to manage all aspects regarding to engineering. •Electronics understanding

I am a dedicated, performance and goal oriented multi-tasker who will do whatever is necessary to help the company reach its maximum potential.

Applying for the post of HSE CO-Ordinator

Assist sales team in all technical challenges while meeting with clients, check & modify well plans,calculate Torque & Drag, drill string & BHA assembly,hydraulics,• Managed and maintained up to 45 jobs in Southern Manitoba, Southern Saskatchewan, all of Alberta and Northern British Columbia.

28+ years with broad experience in Petroleum Engineering (Facilities, Production, Reservoir, etc.). Onshore, offshore, international. Any location considered. Rotational position preferred.

A self starter, motivated and eager to learn new things, willing to provide guidance and help others become team players by setting an example and leading the way.

Seeking a challenging position in Chemical, Oil-Refining, and Petrochemical Engineering field where my technical, professional, and problem solving skills can best be utilized for the future growth of the company.

Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years experience.

Senior Offshore Structural engineer with 13 year of post graduate experience in analysis & design of offshore structures

Strong managerial and technical skills successfully proven in planning, executing and managing business process, projects and Drilling & Warehouse operations, delivering timely results. Analytical, client-oriented, problem solving, leadership and communication abilities complement my professional

20+ years experience as Piping Designer in FEED, EPC, EPCM, Detail Engineering in Oil & Gas, offshore,Petrochemical,and Refinery & Chemical industry.

Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.

Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control

I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.

Petroleum Engineer

DSV with over 20 years experience.

Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic

I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.

Chemical Engineer with experience operations/erection/commissioning of Oil and Gas,Large Chemical Complex

Conceptual design, front end and detailed engineering of process plants including preparing piping layouts , equipment layouts ,plot plan,Preparing and checking PDS 3D/Auotplant models,Isometrics,Pipe support and stress analysis,MTO,BOM,Manpower Management,to complet project within budget and time

Commissioning, Start up Specialist, Operations Supervisor, OJT, Proactive multi-skilled Team Leader with detailed knowledge of process plant/man-management. HND in Chemical Engg; Valid Offshore Pasport Holder.

I have experience with rotating equipment such as turbine, compressors, motorrs, pumps and gearboxes.

12 years of experience in various design, training and project planning activities which involves Static and Dynamic Stress Analysis of different Nuclear, Petrochemical and Pharmaceutical Piping Systems, Selection and Design of Pipe Supports, Piping Layout design, Isometric Drawings, Integrated Pla

Maintenance & Mechanical Commissioning Supervisor

Proect control enginner cost control and senior planner for EPC projects

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out