Resume - I have over 30 years offshore experience and of those have worked in a senior po...

Misco Jobs

Resume #86274

CONTACT INFORMATION:
View contact information...

CAREER HISTORY:

Frontier Drilling ASA

April 09 to present Rig Superintendent

Drillship, Frontier Discoverer
Newfield NFX, China

Appraisal well drilling and DST appraisals.

Seadrill Deepwater Units

June 07 to April 8th 09 Drilling Section Leader

West Hercules
Husky Energy, China
Drilling Section Leader

* IWCF Certificate #ISS 0995 AU 309 2190 Expires 16/05/2010
* OPITO Huet Sea Survival Certificate #38214 Expires 26/05/2012
* Aker Kvaener, Human machine interface course on AKMH equipment:
* DDM(derrick drilling machine)
* Iron roughnecks
* Pipe racking system
* Off line tubular and casing make up
* Drillview.
* Aker Kvaener course:
* Active heave compensator (AHC)
* Crown mounted drill string compensator (DSC)
* Direct acting riser tensioners (DATS)
* Cameron course:
* Drilling system awareness
* Seadrill training
* Permit to work
* VAM maintenance and procurement system
* TQM total quality management system (procedures)
* TBRA's task based risk analysis
* Working at heights and lifting procedures
*

Frontier Drilling Asia

February 2007 – June 2007 Rig Acceptance Team
Subsea Equipment Installation Supervisor

Frontier Discoverer
Pan United Shipyard, Singapore
Initial hire as Rig Superintendent/OIM but due to Rig contract and working in US water of the coast of Alaska the position has now been filled by an American Citizen.
Moved onto the rig Project team.

Gaz de France

September 2006 – February 2007 Night Drilling Supervisor

Enafor 19, Land Rig, Algeria
Exploration/Deviated Appraisal Wells
Completion work over/Side track

Drilling report software (Peloton Well View)

Reliance Industries

June 2006- August 2006 Night Drilling Supervisor

Discoverer 534, Deepwater Drillship
Reliance headquarters, Mumbai

Assisted Drilling Superintendent and Drilling Engineers with program and equipment for pending drilling program offshore east coast of India.

Due to problems with the rig the program has been delayed till end of year possible Q1 2007, no other positions available at present with Reliance Industries, released from contract.

Daewoo International E&P

November 2005 – May 06 Night Drilling Supervisor

Nan Hai 2, Semi Submersible
Sub Sea appraisal wells
Directional drilling
Well testing
 Communicate to the Drilling Contractor and third party service contractors the work required of them by the Operator, so as to achieve the objectives of the Drilling Program or the work plan;
 Compile daily reports.
 Liaise with the drilling and service contractors. Plan ahead, determine and optimize future requirements for drilling equipment and consumables.
 Report to the Senior Drilling Supervisor on board if the program is changing due to well problems and or equipment problems and plan to accommodate the problems
 Monitor Drilling Contractor and third party that they are working to their HSE programs and assist them to achieve their goals.

Frontier Drilling Asia

April 2005 – November 2005 Rig Superintendent

 Drillship Frontier Duchess
 Oversee the daily operations and duties of the senior supervisors and their maintenance schedules.
 Track and monitor all safety issues with the crews and supervisors daily, and inform management of any major safety concerns and issues.
 Monitor on a daily bases the rig budget activities and warehouse inventory and to maintain rig and company goals.
 Co-ordinate with the operator's representative on the drilling program and pass on relevant information to contractor personnel.
 Area working: Myanmar (Burma).
 Drilling exploration and appraisal wells.
 Risktec: Major Emergency Management MEM completed 18th March 2005.

Transocean

June 2004 – April 2005 Safety Performance Toolpusher

 Semi-submersible: Jim Cunningham and Jack Bates.
 Work very closely with WSM (Well Site Manager) to plan the next phase of the operation, discuss next phase with relevant third party representatives to ensure their equipment is ready to go and procedures are in place.
 To give an independent view of the day-to-day operations and find were improvements could be made for an overall better performance between operator and contractor.
 Report the findings to the OIM and Senior Drilling Supervisor and formulate a plan to discuss them with the crews and Supervisors and upgrade the rig specific procedures.
 Be a focal point for the crews, and encourage any suggestions or idea's to enhance the safety and drilling performance. This can be during pre tour meetings, toolbox talks, safety meetings and any other time or place.
 To be at the worksite at all relevant times, assisting and supervising.

Areas Worked
 Offshore Egypt, deepwater BP
 Offshore Otway Basin, Victoria Australia, deepwater Santos Drilling
 Carnarvon Basin, North West Shelf West Australia, deepwater and Enfield subsea project Woodside Petroleum
 Batch drilling Enfield subsea project, planning open water completions and running FMC subsea trees.

Apache Energy Australia & BHP Billiton Australia

January 2004 – June 2004 HSE Coach

Joint Deepwater Project, West Australia – Semi Submersible: Atwood Eagle

 To be present at pre-tour meetings and any risk assessments.
 To help and encourage the crews with safe working practices.
 To be a focal point for any suggestions that will enhance the safety performance of the rig and personnel.
 To coach people in the best use of the STOP program and relevant safety programs onboard.
 To be at the worksite at all relevant times, assisting and supervising.

Area Worked
 North West Shelf, West Australia

Agipkco, Kazakhstan

November 2003 – December 2003 Well Operations HSE Advisor – Shore Based

 Worked with Agipkco Drilling Manager and his staff to improve HSE and operations with drilling contractors.
 Evaluate emergency response drills and ensure that all personnel are familiar with the Emergency Plan
 Monitor onboard operations with regard to all aspects of safety and to advise Management on safe working practices.

Apache Energy Australia

June 2003 – November 2003 Night Drilling Supervisor

 Jack up Ensco 56.
 Communicate to the Drilling Contractor and third party service contractors the work required of them by the Operator, so as to achieve the objectives of the Drilling Program or the work plan.
 Compile daily reports using the DIMS software.
 Liaise with the drilling and service contractors. Plan ahead, determine and optimize future requirements for drilling equipment and consumables.
 Report to the Senior Drilling Supervisor on board if the program is changing due to well problems and or equipment problems and plan to accommodate the problems.
 Monitor Drilling Contractor and third party that they are working to their HSE programs and assist them to achieve their goals.

Areas Worked
 Carnarvon Basin West Australia exploration and appraisal wells in water depths from 8M to 50M, well depths to 3000M.
 Work over and development on platforms.
 Exploration and appraisal wells using auto track steerable systems and OBM.

Transocean

December 2000 – June 2003 OIM
Relieving Rig Manager

 Semi submersible: Actinia
 Oversee the daily operations and duties of the senior supervisors and their maintenance schedules.
 Track and monitor all safety issues with the crews and supervisors daily, and inform management of any major safety concerns and issues.
 Monitor on a daily bases the rig budget activities and warehouse inventory and to maintain rig and company goals.
 Co-ordinate with the operator's representative on the drilling program and pass on relevant information to contractor personnel.

Areas Worked
 Spain, Malta, Tunisia and Egypt
 Repsol YPF, Spain; The development of the Chiperon subsea completion and tie back to Casablanca platform was performed with Cameron trees and equipment.
 Malta and Tunisia; Exploration and appraisal wells in water depths from 100m to 550m
 Egypt IEOC; Exploration and appraisal wells offshore Port Said

Transocean Sedco Forex

April 1996 – December 2000 Rig Superintendent/OIM

 Semi Submersible: Sedco 708
 Oversee the daily operations and duties of the senior supervisors and their maintenance schedules.
 Track and monitor all safety issues with the crews and supervisors daily, and inform management of any major safety concerns and issues.
 Monitor on a daily bases the rig budget activities and warehouse inventory and to maintain rig and company goals.
 Co-ordinate with the operator's representative on the drilling program and pass on relevant information to contractor personnel.

Areas Worked
 Angola, Cabinda Gulf

History
 Set 12 well subsea templates in 150M water, drilled all wells directional and horizontal for future platform and development.
 Exploration on block 15 working in 300M to 400M of water, three new discoveries and appraisal drilling.
 Completed the Kuito subsea project, this consisted of batch drilling all 12 wells horizontal and deviated wells to TD.
 Batch ran Vetco subsea trees and completed the wells; all wells completed with chrome tubing, Halliburton frac and gravel pac.
 The rig run all the flow lines and control lines from all subsea trees to the manifold.
 The Sedco 708 was moored on the Kuito field using a preset mooring system to allow it to maneuver safety over each well.
 The project was completed before schedule and under budget and to add to the success of the project there were no major incidents and or LTA's.

Maersk Drilling

1995 – 1996 Driller

 Floating production vessel Nanhai Tiao Zhan, South China Sea.
 Maersk Drilling had the labor contract and were working for Amoco on the Luihai 1-11 subsea development and completion field in the South China Sea.
 The operation consisted of running all the subsea wellhead bases, drill the horizontal well complete and run the subsea tree.
 Assisted in running all the subsea umbilical control lines for production with ROV operator.
 All completions were run with reda submersible pumps and controls.

Diamond Offshore

1988 – 1995 Driller/Rig Superintendent

 Semi submersibles Ocean Epoch, Ocean General and Ocean Bounty.
 Consult with Operators Drilling Supervisor on drilling operations and ongoing operations.

Areas Worked
 West and East coast of Australia, exploration and appraisal drilling in water depths from 200M to 500M.

Semi Submersible, Ocean Bounty, Australia

February 1994 – March 1994 Toolpusher

Equipment worked with
 National 12-P-160 Mud Pumps
 Varco TDS-4 S Top Drive
 Varco RBS System
Achievements:
Well Control Certification
Advanced Stability and Ballast Control Courses at the Diamond Offshore Training School
Varco Top Drive and B.J. Drilling System Course, Singapore
Stop Safety Training Observation program

Semi Submersible, Diamond M. General, Australia

June 1988 – February 1990 Driller
February 1990 – June 1990 Toolpusher

Equipment worked with
 Oilwell E 3000 Drawworks
 Oilwell Ap-1700 Mud Pumps
 Vetco Motion Compensator
 Varco TDS-4 Top Drive
 Varco RBS System

Sedco Forex

Semi Submersible – 708 Australia

January 1988 – June 1988 Driller

Drilled - Timor Sea for B.H.P.
 Equipment worked with
 Oilwell E 3000 Drawworks
 Oilwell AP-1700 Slush Pumps
 NL Shaffer Motion Compensator
 Cameron 18 ¾ BOP
 Baylor Scr. Drillers Consol.


Martech Ocean Systems, Australia

1987 – 1988 Driller on Drillship
Toolpusher on Jack Up
Jackup Rig (Hykuru 8)
Drillship (Energy Searcher)

Equipment worked with Jackup
 National 1625 DE Drawworks
 National 12-P-160 Slush Pumps
 Mitsubishi Elect Cranes
 Mitsubishi Scr. And Drillers consol
 Mitsubishi Jacking System
 Cameron Type U BOP and Koomey BOP Accumulator System
 Serviced Rig from Stack Mod. To Drilling Mod.

Equipment worked with drillship
 Gardner Denver 3000 E Drawworks
 Gardner Denver PZ-11 Slush Pumps
 NL Shaffer Motion Compensator
 Cameron 18 ¾ BOP
 Drilled in Timor Sea for B.H.P.

Westbridge Drilling Company

July 1987 – November 1987 Toolpusher

Land Rig 220 Australia.
Drilled on Lowendal Island for Bond Pet.

Equipment worked with
 National 80-UE Drawworks
 National 27 ½ Chain Driven Rotary
 National 8-80 Slush Pumps

Global Marine Drilling Company, Australia

June 1982 – December 1983 Driller
December 1983 – October 1985 Toolpusher
Jackup – Glomar Main Pass 3 Australia

Drilled – West Coast Australia
Arafura Sea Bonaparte Gulf

Equipment worked with:
 National 1625 De Drawworks
 National 12-P-160 Triplex Slush Pump
 National Rig Jacking System
 Ross Hill Scr. Drillers Consol
 Halliburton Cementing Unit
 Surface Cameron Type U BOP and
 Hydril Diverter System
 Type 80 Koomey BOP Accumulator System
 National Cranes.

Achievements with Global Marine
 Brat – Well Control School Sept. 1982
 University of Queensland Aust.
 Dept. Of Mining and Metallurgical Engineering
 Well Control 1983
 Supervisory Effectiveness Training Program – Global Marine Training Centre 1982
 Global Marine Drillers O.J.T. March 1983
 St. Johns Ambulance Assoc. Short Course in Basic Life Support Sept. 1983
 Global Marine Jackup Stability Sept. 1984
 U.S. Merchant Marines Document for an Able Seaman, Lifeboatman Sept. 1984
 International Drilling School – Well Control Course July 1985

Global Marine Drilling Company, International

October 1985 – March 1987 Toolpusher

Jackup Glomar Main Pass 3

Area's drilled
Java Sea, Malacca Straight INDONESIA.
Achievements
Well Control Course at the University of Queensland.

Petromarine Drilling Company

November 1981 – June 1982

Driller/Toolpusher

Drillship – Petromar North Sea

Drilled – Bass Strait and West Coast Australia.

Equipment worked with
 National 1625 De Drawworks
 National 12-P-160 Triplex Slush Pump
 Western Gear Motion Compensator
 Lay down Pipe racking system
 General Elect. Scr. Drillers Consol
 Vetco Subsea System
 Halliburton Cementing Unit
 Link Belt Cranes.
Atwood Oceanics

January 1977 – August 1977 Floorman
August 1977 – December 1978 Derrickman
December 1978 – June 1979 Assistant Driller
June 1979 – November 1981 Driller

Drillship – Regional Endeavour. North West shelf

Equipment worked with:
 National 1320 UE Drawworks
 National 12-P-160 Triplex Slush Pump
 B.J. Pipe Racking System
 B.J. Cementing Unit
 General Elect. Scr. Drillers Consol
 Vetco Motion Compensator
 Vetco Subsea System

Achievements during my term with –Atwood Oceanics

 IMCO SERVICES
 Well Control School Oct. 1979
 SANTA FE DRILLING CO.
 Well Control School Jan. 1979
 University of Queensland Aust.
 Dept. Of Mining & Metallurgical Eng.
 Well Control School on a Digitran
 Rig Floor Simulator July 1981
 Industrial Foundation for Accident Prevention
 Course Nov. 1980

Atwood Oceanics

October 1975 – December 1975 Floorman

Drillship Regional Endeavour. Drilled – East Coast of Australia and Bass Strait.

Salveson Offshore Drilling Co

January 1975 – October 1975 Roustabout/Floorman

Drillship Dalmahoy. Drilled – West Coast of Australia.

TRAINING AND CERTIFICATES:

IWCF Certificate #ISS 0339 AU 3081375 Expires 16/05/2010
OPITO Huet Sea Survival Certificate #093701204 Expires 26/05/2012
Risktec: Major Emergency Management (MEM) completed 18th Mar 05
Diamond Offshore permit to work system.
ODCAA Well Control School (IADC Approved)
Hazard Awareness Course
Helicopter Survival Course (HUET)
Job Safety Analysis Course
H2s training
Fire fighting and BA training.
Stability/Ballast control training

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1651 to 1700 of 10903)

Go to Search Parameters...

Brief Description

I have practiced my knowledge and expertise in these fields: Gas Measurement, Gas Plant and Gathering Operations, Management, Safety and Environmental awareness.

Skill: 11 Years Structural designer ( Including 2 Y rs. in PDMS , 2 Yrs. in PDS & Micro-Station ,3 Yrs. in X-Steel , 4 Yrs. Auto-Cad ) Qualification: B.E Production Engineering - First class – April 2009 – MIT Anna University, Diploma in Mechanical Engineering – First class - April 1998.

Results-driven manager backed by 8 years proven record of accomplishments and responsibilities in Business Analysis, Project Engineering and Management of various oil and gas.

I start my profession life from Techno Agriculture when I done Agriculture machinery repairing. After that I went to Saudi Oger and work on Hydraulic

Total 7+ years of experience in Refinery, Petro chemical, Power Plants (steel & RCC structures) and Industrial Buildings.

14 years of oil&gas,petrochmical QC and construction experience

Managed Wind farms relevant IPO project for the listing on Singapore stock exchange on behalf of Arcapita Bank;

Project Engineer with filed experience in Marine industry, oil & gas and renewable energy industry

I AM SCIENCE GRADUATE HAVING 12+ YEARS OF PRODUCTION EXPERIENCE I REFINERY AND CHEMICAL INDUSTRIES

A qualified mechanical engineer having a litany of professional courses with 11+ years of extensive track record in heading key engineering divisions and technical operations/maintenance, across diverse geographical locations in the Oil & Gas industry, seeking a managerial/engineering position with

“Petroleum and Gases” University Ploiesti, Romania

To obtain the position of Instrumentation Technician/Production Operator.

Over 6 years of experience in analysis and design of steel and concrete structures

Engineering Graduate( B.Tech. Chemical Engg. – 4 years degree course) with 16 ½ Years Experience in Work Over Operations / Supervisor / Completion

Presently working as Safety Engineer (Contract Hire through agency) for Abu Dhabi National Oil Company, ADNOC- Abu Dhabi, and U.A.E from March 2006.

15 Years Geospatial Experience. Oil/Gas, Pipeline Design/Engineering, Land Management, Geospatial RDMS

I am an Instrument Designer with more than 25 years experience, predominantly in the Oil and Gas Industry. I have extensive supervisory experience in multi-discipline and multi-national working enviroments.

Lead Auditor - ISO 9001:2000 Series; CSWIP 3.2 Senior Welding Inspector; CSWIP 3.4 Radiographic Film Interpreter for Group A & B materials; CSWIP - BGas Grade 2 Painting Inspector; 28 years of oil and gas industry experience both onshore and offshore. 5 years Refinery experience as Plant Inspector.

Talented and accomplished Naval Architect with extensive FPSO, FSO Conversion, Ship Design and Shipbuilding background particularly in the areas of trim and stability, strength of ships and ship structures. Proven ability to design FSO, FPSO and various types of ships. Able to liaison between tech

Well established Petroleum Exploration and System Analyst with over 15 years of experience in the international petroleum industry combined with a PhD in Petroleum Geochemistry.

I am a fully qualified and experienced Health, Safety and Environmental professional with 14 years upstream Oil & Gas industry experience working around the world for International Oil companies

Registered Professional Engineer in Ontario, Canada, Mechanical Engineer BSc. & M.Eng.

See resume below for details of career path from a qualified engineer with 5 years offshore engineering to a position of Contracts Manager within Subsea 7 looking after the UK business and providing support to West African projects , managing a team of more than 17 contract specialists

Project Management and General Management Professional

Thirty-two years of successful senior-level public and private sector programme management experience, with a core focus in Community and Social Development, Institutional Strengthening & Capacity Building, Strategy, Local Economic Development, and Small & Medium-Enterprise (SME) Development.

Project /construction director/manager FPFO, Jacket and decks, Modules, loading terminals (shallow and deep water)

Has proven ability in design engineering, fabrication drawing detailing, material quantity estimation, fabrication, and installation & commissioning supervision. Familiar with international design codes, standards, procedures, and engineering practices.

I having overall 11years experiance in production/manufacturing field and currenty looking for better future where i can exploure more my knowledge and experiance.

Highly Skilled and conscientious B Welder/Vessell Fitter for the last 17 years. Dedicated and organized, able to prioritize and meet company deadlines.

Sr. piping design

Dedicated, enthusiastic and diligent individual with excellent organisational skills. I perform at a consistently high standard in a very demanding and pressurised environment. My maturity and professional manner exudes a sense of confidence and calm in a very demanding environment.

Professional Civil Engineer with over 11 years of experience in the oil and gas industry focused in the analysis and design of different types of structures, such as frameworks, pipe racks, bridge trusses, operation platforms, vertical tanks supports and their foundation, and retaining walls.

I have over 30 years offshore experience and of those have worked in a senior position 25+ years, have worked in a senior position on some large scale sub sea completions worldwide, I have very good equipment knowledge and are looking for a shore base position with logistics or projects.

Over 35 years Drilling, Africa, ME, Russia, USA

A geologist with experience in the oil industry involving exploration and development projects in Guatemala South Peten basin, geological information database management, mud logging in oil drilling activities, oil tanks gauging(1996-2004). Logging geologist in USA (Nov 2005-Mar 2009)

I have 8 years of designing experience with a good knowledge of P& ID, fabrication, welding, material selection and manufacturing process worked on the designing software like Auto CAD and Pro/E both in 2D and 3D for almost 5years from concept stage till the mass production of the component.

Seeking mechanical supervisor/mechanic position

Experienced and motivated Ph.D mechanical Engineer

Oilfield Experience 34 years. 33 years with Well Services. I began my career as Well services Technician and my last jobs with Well Services as a Team Leader responsible for Slick Line operation in both Gas and Oil wells.

SUMMARY I have been involved in the Drilling and Work over Industry for the past 26 years. With experience on Tender and Drill Ship & land rigs, both Mechanical and Electrical, ranging from 6,000 to 20,000 feet, as well as Sea crest and

Civil engineer/pipeline precommissioning

multi-disciplined autocad designer

Performing work as per international standards following operational excellence management system

Extensive 20+ year’s professional experience in instrumentation, control and automation for Oil, Gas and Petrochemical industries.

Extensive experience in power, petrochemical and utilities plant startup, operation and training

I have sufficient exposure in dealing with International Audit and Inspection like MCA-UK., U.S.F.D.A., MCC - South Africa, WHO Etc. Man Management is my proven skill for years. Maintain focus on achieving bottom line result while formulating and implementing the advanced technolog and productivity.

To secure a full-time position with an industry leading company world-wide in IT – Manager / Project Manager / Project Coordinator / Senior Planner

Experienced Drilling and DHS Supervisor

M.Tech Geo-Engineering, 9 years of proven industry experience in Geology, GIS, RS, Image processing, QA & Testing, Performance Engineering on Financial, Accounting, CRM, ERP, Retail, B2C Web & Client Server applications like ESRI arcGIS, ERDAS, MapInfo, AutoCAD, Java, J2EE & .Net, Data Warehousing

Perform all oil and gas estings, envirmental testings, wwtp testing, utility relating testing, chemical preprations, well testings, auxlery fireman, first aider, isorelating working, hse relating working, master in chemistry,

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [ 34 ] 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out