Resume - I have experience with rotating equipment such as turbine, compressors, motorrs,...

Misco Jobs

Resume #86276

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

To secure a challenging position in an organization that would allow me to use my extensive experience in operations, maintenance, and troubleshooting for maximum plant availability.

EDUCATION:

1982-1988 Polytechnic Institute of Belarus former USSR.
Electro-Mechanical Engineering & Master of Science in Power Plants.
WORK EXPERIENCE:
2008-Present. GE Energy, Mechanical field Engineer. Installation and repair of rotating equipment also repair mechanical drive steam turbine, hydro-generator, turbine-runner, gearbox, compressor and fans. Electromechanical Engineer to provide leadership and technical support of activities for the power generation plants within the region as needed regarding technical issues. Some of the responsibilities include to participate and/or lead teams that focus on specific problem areas or needs for generating units, to initiate/participate in continuous improvement planning and implementation in assigned area of responsibility, to coordinate activities with Vendors/Contractors, to perform field inspections and take field measurements, to analyze technical performance of plant systems and equipment, to perform root cause analysis of system and equipment problems, to develop and evaluate alternative solutions to engineering problems, prepare studies/scope statements outlining alternative solutions, and recommend least cost solutions, etc. Responsible for both phases of the projects - tendering and construction. Responsible for developing detailed specifications for the main process equipment (boiler, turbine, air-cooled condenser, fuel handling). In charge of developing datasheets and specification for mechanical balance of plant equipment (pumps, tanks, heat exchangers, de-mineralized water, compressed air, etc…). Responsible for the preparation of the request for proposal for mechanical equipment, request for proposal for mechanical contractor, selection and follow up with suppliers and the mechanical contractor. Responsible for interfacing with the civil, electrical and Landscape engineers on support requirements.

2006-2008. Advanced Drainage Systems, Inc- Logan Twp. NJ. Plant Services Engineer: Installation and maintenance of Heavy equipments, Corrugators, extruders and downstream equipment for plastic manufacturing of HD-polyethylene PIPES for drainage. Also installation of new facilities at nationwide and international.

2000-2006 Linc Facility Services – FEDEX, Newark International AIRPORT, NJ
Maintenance Engineer: Duties included, coordinating and directing the 52 maintenance CREW and repair of all equipment including conveyors, lifts, instrumentation and controls, Pumps, blowers, boilers and compressors. Implements preventative maintenance programs, evaluating potential new equipment for purchase, manage the parts and supply inventory. Ensure all related maintenance records are accurate and current. Supervisor the activities of 52 assigned maintenance personnel, and keep management informed of all activities.

1996-2000 Waste Management – Elizabeth, NJ
Foreman: Duties included Supervising and hands-on maintaining and troubleshooting of conveyor sorting system, hydraulic system, welding machine, etc.

1992-1996 Automated Recycling Technologies – Newark, NJ
Maintenance Supervisor: Duties included, creating a predictive and preventive maintenance program for the conveyor system. Shift scheduling, repairing and maintenance of conveyors, blowers, shakers, hydraulic system, and welding.

1990-1992 Dominican oil Refinery
Electromechanical Engineer: Duties included Engineering and supervision of installation and start-up activities of work on-site. Support and coordinates construction interface activities in accordance with Management Plan.

1988-1990 Dominican Power and Light Corp. – Dominican Republic
Project Engineer: Duties included, Engineering and Construction, including directing and coordinating multiple disciplines from incepting of engineering through start-up, testing of equipment, site and equipment layout, technical design review, process engineering, instrument and control systems, vendor equipment selection and negotiation, troubleshooting and problem resolution, coordination of installation activities. Supervision and start-up activities, employee training, documentation and executive reporting.

ACHIEVEMENT: Low Pressure Boiler License (Black Seal)
I hold a TWIC card.

COMMUNICATION SKILLS:

Speak English, Russian and Spanish fluently.

REFERENCES:

Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 10816)

Go to Search Parameters...

Brief Description

I am a post graduate in chemistry working as Senior Chemist in KOC.Well experience in crude oil, Gas and Water analysis. Handling of all kind of Lab Instruments,Calibration ,standard chemicals preparation, reports making are the responsibilities.

Lead/Senior Mechanical Engineer- Oil & Gas, Chemical, Petrochemical and Energy Industries

Free! Oil and Gas Industry onshore construction civil engineering Superintendent with 20 years experience in overseas projects.

I am a B.Sc Chemistry degree holder and have totally 24 years of very good experience in PROCESS FIELD / PANEL operations in oil/gas treatment plant. This is one of the biggest oil processing plant in India. SOUTHERN PETROCHEMICAL INDUSTRIES CORPORATION LTD., (SPIC).

Twenty plus year's progressive experience in heavy industrial design, development, and construction for petrochemical refineries, upstream petrochemical, waste water treatment, power generation, chemical demilitarization facilities, Microchip facilities, LPG gas transitions, and the food & beverage

I am very talented and a hard worker. I have a good eye for any type of construction.

Outstanding background of knowledge’s into oil and gas processing and utilities, more then 14 years experience into commissioning and process activities from which more than three years offshore, working into an multicultural team and with all disciplines engineers, proactive and disciplined

24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:

20 years experience. Executive with proven management, operations, P&L management, and business law experience. Communicator, negotiator, and capital raiser. Global, regional, and country specific business expertise.

Challenging job related to oilfield, where I can capitalize on my 23 years of oilfield experience with Schlumberger in management, sales, marketing and contracts negotiations. No geographical preference. No schooling constraints.

20+ years experience in private/public sector contract, program/project mgmt. Domestic & international E&P and technology development with major/independent/service companies. Identified significant oil/gas reserves through innovative mgmt. of multidiscipline teams.

Geophysical modelling Rock physics, AVO, Pre-stack and Post-Stack Seismic Inversion, seismology, reservoir characterization, Interpreted seismic data (3D, 2D) & amplitude analysis using Seisworks, PostStack/ PAL, IESX, and EarthCube. Certified Landmark Graphics instructor

I have completed a BSc in Geology and a PhD in Petroleum Engineering. In the last 20 years working for BP I have worked as a Production Technologist, Completions Engineer, Reservoir Engineer and in Production Operations, both onshore and also offshore on an FPSO, in recent years as a Team Leader.

Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.

Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.

field appraisal, depletion, material balance, well test, reserve estimates, water injection, fractional flow, gas injection, reservoir evaluation, production forecast, reservoir and production monitoring, data acquisition, multilaterals, development projects, reservoir modelling and simulation.

7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .

I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.

Professionally Qualified Engineer / Manager, Harvard Business School Alumni, Certified Project Manager (PMP) - Now In General Management In Oil & Gas Up & Mid Stream

I graduated from Sultan Ageng Tirtayasa University, in Indonesia on October 2004, majoring Chemical Engineering Degree. I have experienced working in petrochemical plant. During 10th years I have ever been worked at PT. Asahimas Chemical Indonesia ( VCM/EDC Plant ) from 1997-2007

City and Guilds Motor Mechanical Technician Diploma and full tech certificate. Languages: English, Arabic and French Spoken fluently

PDS Frameworks, Autocad, Microstation

Objective. Seeking an increasingly responsible position with an opportunity for professional challenge and growth while combining my areas of experience in the field of electrical works to support and enhance corporate goals and objectives. Educational Qualification. 1.Diploma in Electrical Engineer

Trained Radiation Protection Officer & Health Physicist from India

I have sailed as Master on Tankers and have good experience in Oil / Chemical / Gas Tankers.

Skills: •Able to take proper and quick decision. •Very much interested to work in technical environment. •Excellent ability of producing and reading working drawings. •Able to work alone or in team very environment. •Able to manage all aspects regarding to engineering. •Electronics understanding

I am a dedicated, performance and goal oriented multi-tasker who will do whatever is necessary to help the company reach its maximum potential.

Applying for the post of HSE CO-Ordinator

Assist sales team in all technical challenges while meeting with clients, check & modify well plans,calculate Torque & Drag, drill string & BHA assembly,hydraulics,• Managed and maintained up to 45 jobs in Southern Manitoba, Southern Saskatchewan, all of Alberta and Northern British Columbia.

28+ years with broad experience in Petroleum Engineering (Facilities, Production, Reservoir, etc.). Onshore, offshore, international. Any location considered. Rotational position preferred.

A self starter, motivated and eager to learn new things, willing to provide guidance and help others become team players by setting an example and leading the way.

Seeking a challenging position in Chemical, Oil-Refining, and Petrochemical Engineering field where my technical, professional, and problem solving skills can best be utilized for the future growth of the company.

Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years experience.

Senior Offshore Structural engineer with 13 year of post graduate experience in analysis & design of offshore structures

Strong managerial and technical skills successfully proven in planning, executing and managing business process, projects and Drilling & Warehouse operations, delivering timely results. Analytical, client-oriented, problem solving, leadership and communication abilities complement my professional

20+ years experience as Piping Designer in FEED, EPC, EPCM, Detail Engineering in Oil & Gas, offshore,Petrochemical,and Refinery & Chemical industry.

Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.

Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control

I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.

Petroleum Engineer

DSV with over 20 years experience.

Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic

I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.

Chemical Engineer with experience operations/erection/commissioning of Oil and Gas,Large Chemical Complex

Conceptual design, front end and detailed engineering of process plants including preparing piping layouts , equipment layouts ,plot plan,Preparing and checking PDS 3D/Auotplant models,Isometrics,Pipe support and stress analysis,MTO,BOM,Manpower Management,to complet project within budget and time

Commissioning, Start up Specialist, Operations Supervisor, OJT, Proactive multi-skilled Team Leader with detailed knowledge of process plant/man-management. HND in Chemical Engg; Valid Offshore Pasport Holder.

I have experience with rotating equipment such as turbine, compressors, motorrs, pumps and gearboxes.

12 years of experience in various design, training and project planning activities which involves Static and Dynamic Stress Analysis of different Nuclear, Petrochemical and Pharmaceutical Piping Systems, Selection and Design of Pipe Supports, Piping Layout design, Isometric Drawings, Integrated Pla

Maintenance & Mechanical Commissioning Supervisor

Proect control enginner cost control and senior planner for EPC projects

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out