Resume - Commissioning, Start up Specialist, Operations Supervisor, OJT, Proactive multi...

Misco Jobs

Resume #86304

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:

HND Chemical Engineering.
SVQ L11/L12 Coaching and training Process Operations.
Qualified 1st Level Auditor for PTW Systems Electronics (Credits & Distinctions)
Qualified Permit-to-Work Issuer - Qualified 1st Level Auditor for PTW Systems
Incident Control & Emergency Issues – Fully Trained
Practical training in Laboratory Testing Backer Petrolite and - Honeywell TPS,
Honey well Plant Scape, Emerson Delta V and ABB control operations DCS,
Allen Broadly PLCs, Triconex and Autronica F&G control system

COURSES
OSRL&EARL Oil spill response course fro supervisors IMO Level 2.
STCW 95 certified cources on Coxswain,HUET,PST,PSSR, FF&FF, OTFC, and First Aid.
STOP Safety Training Observation Program by Dupont.
NP, GE and Arial Compressor training programs.
Solar, Siemens and Dresser Rand Turbines Training Programs,
Certified Gas Chromatography Course by Varian.
ULYSIS Certified Computer Operation Systems in Windows (Micro Soft Office, Project) etc
NORMS for Radiation.
Safety at Off Shore certified by STRATEX, Australia.
CMMI from Bench Mate, AMOS, Uni Saap and Star IPS.

OBJECTIVE:

To grow along with the development of the company; To acchive an Optimum Production with a Hazard free Operation and To minimize environmental pollution such as emission, oil in water, lowering the consumption of chemicals and waste management.

WORK EXPERIENCE:

1) From Oct 2006 to Aug 2009
Employer: BW Offshore As Client: PEMEX Mexico, Ku, Mallob & Zaap field
Project: FPSO Yuum Kak Naab Position: Production Supervisor.

FPSO Yuum Kak Naab is the first FPSO in GOM water and the first FPSO owned and operated by BW offshore (Top side process modules and Utilities). I am being with BW offshore since 2006 Oct from the pre-commissioning and conversion stage of the FPSO Yuum Kak Naab at Sembawang Shipping Yard SSPL Singapore); worked with the multi-national work force all over the globe From East to west and North to South (Japanese to Canadians and Norwegian to NZs) mending with vendors of various process, utility and safety equipments and systems.
We have the first oil at June 16, 2207 and as of now we produced 36 000 000 API 13 bbls oil; Offloaded some 200 000 000 bbls and exported 42 000 MMSCF gas.
We trained the nationals as per oper-cab and some of them are well settled for the control room operation. BWO planning to train spanish mexican at Yuum Kak Naab so as the Spanish can operate the near future FPSO projects at GOM as well as south atlantic.

Responsibility and authority
Implement Production Objectives for Unit Production Facilities Operations personnals;
Prepare the Production planning, Preparing the Production crew Planning,
Optimize production and use of chemicals, Ensure and follow –Up Hazard free operation
Assist and Mending with Clients and BWO Commossioning while in pre-commisioning and commisioning. Witnessing all CTRs, NCR and all Commissiong dozziers for acceptance.
Assist in the "on-the-job-training" (OJT) of all subordinates under supervision of the Production Supervisor.
Follow-up and updating of operating documentation and SOP
Ensure the PTW system is controlled and adhered to as per requirements of the system.
Ensure that all tests and inspection routines are carried out.
Ensure that vendors and contractors are managed safely and effectively
Provide maintenance personnel and service personnel with adequate and suitable information.
Prepare required reports. Assist in budgeting/planning of production activities.
Mangement Member of Emergency Response Management Team.

2) From Aug 2005 to Sept 2006
Employer: 5CE Abudhabi Client:Total ABK /OKGD - Admaopco
Project: Offshore Kuff Gas Development Position: Commissioning and Start Up Coordinator.

Description of Responsibilities:

OKGD is an 650 MMSCFD gas process plant a Dual in a train four deck offshore plant with Electro heater TEG facility, Mitsubishi centrifugal fuel recover compressor, Rolls Royce gas Injection Compressor, Nuevo Pignone gas recover compressor Alsthom (Siemens) Turbines powered by ABB SACE and Automated with Honeywell TPS - Triconex in Persian Gulf Designed by ABB Luminous Global BV and commissioned by ADMAOPCO.
As a commissioning and Start Up Coordinator my responsibilities to report Commissioning and Start Up Site Leader about:-
Witnessing As built Isometric check up of the pressure vessels and flow lines equipments,
Functional and Loop check up of all instrumental and electrical equipments check ups.
Pre-commissioning and Commissioning of complete platform and sub-system.
Flushing, Hydro testing and Pneumatic pressure testing of piping and vessels.
Chemical cleaning and preservation of piping.
Preparation of protocol for all commissioning activities with third party
Operational testing of sub system and equipments.
Process and Instrumentation drawings updating in line with actual work carried.
Baroscopic internal inspection of piping and recommend appropriate remedial action.

3) YEAR 2001 - YEAR 2005 Aug

Employer: MSI – (GMOS) Gray-Mackenzie Oil field Services, Gibraltar; UK
Client: Conoco Phillips Syria Project: Conoco Syria Dez Gas (LPG)Ltd
Position: Sr Operations Supervisor

Description of Responsibilities

CSDGL a 450 MMSCFD capacity LPG Plant with a dual train gas liquefying facility -one with JT depreciation and another with mechanical cooling - producing 850 MT LPG per day as product, 35 000 BBLD condensate and 120 MM SCFD lean gas as associate product, 240 MMSCFD Gas for re injection and Gas lift. CSDGL gets feed stock of 150 MMSCFD ᤢ BarG associate gas from six compressor field stations which boost ups the multi stream multi pressure associate gas got from eight Al-Furat (Shell) Petroleum Co., and two Dez (Total) Petroleum Company CPFs,PPFs & Gathering Stations, and 300 MMSCFD rich gas @ 90 BarG from five High Pressure Tabiye (Total) Wells. Sending the lean Gas for the Total's Dez Petroleum Gas lift. It is an integrated sophisticated project operated by ConocoPhillips.

Reporting to the Head of Production about the daily production, the up stream flow details, planning and preparing for proactive and reactive maintenance, inventory controlling, preparing MOCs and commissioning the modification jobs at appropriate time so as to boost the production and controlling the cost of production. As a Field Production Sr Supervisor liaison between Mechanical maintenance, Electrical and Instrumentation Supervisors to responding for any MOC which ease the process. Liason with vendors in all area to control the quality as well as the cost; Act as a team leader for all preventive any breakdowns as well as minimise the down time in the field area. Reporting in weekly meeting on planning as well as actively participating fortnightly safety meeting to reduce the incidents, near miss in the work area. Trained the National SPC operators in all areas including Monitoring Controlling and Trouble Shooting the over all process with DCS Honeywell Plant Scape a hybrid with Allan Bradley PLC.

Conducting Technical Class Room Teaching, In Plant Teaching and On the Job Training to the SPC National Operation Technicians, evaluating their skills in monthly, mid year and annual basis, as per evaluation developing their skills where ever they are in lack.

4) YEAR 1995 – year 2001

Employer: Oil Field Services Ltd, Bombay. Client: Enron-Oil and Gas India Ltd. ( EOGIL)
Project: Mukta and Panna Gas Project, Position: Junior Supportive Tech – Production.

GAS PROCESSING

Well experience in platform operations, controlling the operating parameters accordingly to achieve optimum production, maximum safety and environmental protection. Experience in efficiently handling the gas-dehydration system. Familiar with Glycol re-generation systems. Monitoring and adjusting the different parameters in the system to achieve minimum moisture content and recording the data for the de-hydration performance of the unit, controlling the parameters to re-generate lean glycol as good as possible.

WELL HEAD OPERATIONS
Familiar with day to day well head operation as a team leader in operation. Responsible for establishing the baker, autocon, ruelco well control panels. Periodical checking of emergency shutdown and fire shutdown system. Routine functional checking of S.S.S.V and S.S.V, Manifold valve operations, checking and calibration of pressure switches high and low. Individual separator study of wells and monitoring test reports 3 phase as well as 2 phase testing. Familiar with different well activation methods, operation of X mass tree valves, controlling the well flow with variable or fixed choke according to the production requirement. Experience in gas lifting operation. Servicing and maintenance of different types valves (Manual & Pneumatic). Assisting in slick line operations during B.H.P survey, carrying out multi rate well tests. Assisting rig personals during drilling and post drilling operations such as well flow back, supervising the satellite platform while conducting hot work.

CHEMICAL INJECTION SYSTEM
Routine calibration of the chemical injection pumps (De emulsifier, GCI, scale inhibitor etc.).
Testing of sales Condensate samples for BS&W, Overboard water oil PPM, Salinity. Glycol analysing Lean and Rich glycol, pH probe, Form test etc.

FIRE & SAFETY
As a member in the primary emergency response term in the platform, well experience in the platform safety procedures and familiar with the different types of alarms and assigned responsibilities in case of any emergencies. Familiar with the different types of safety equipment for fire fighting and breathing apparatus etc. Checking and arranging of safety equipment for conducting various jobs in the platforms as per the work permit.Keeping a good housekeeping attitude to keep the platform tidy and safe.Well versed with Lock out tag out work system.Preparing work permits for hot jobs, vessel entries, etc.

5) YEAR 1989 – year 1995

Client: Oil & Natural Gas Corporation India Ltd
Projects: On Shore & Off Shore Petroleum Production facilities.
Position: Production / Process Operator.

Ensure smooth operation of Oil / Gas production, Gas lift compressors, and its utilities such as Air compressors, Glycol treatment unit, Amine treatment unit, Fuel gas treatment unit, Fuel oil purification, Power generation units, Chemical injection systems, Fire water system, Cooling water system, Potable water units, Demineralized water unit and Nitrogen generation units.
Monitoring the process parameters and updating in the daily computer logging system. Preparation of daily production report.
Monthly functional testing of Fire & gas monitoring system and Fire water deluge sprinkler system.
Functional testing of Emergency generators, and sequential operation testing of Fire water pumps.
Operational First level preventive maintenance.
Preparation and coordination for Planned / Emergency shutdowns
Work permits- Assisting to Hot, Cold, isolation (Mechanical & Electrical), Vessel entry and Diving Permits preparation and execution.
Pigging in the gas / Oil sea lines as per the Schedule. On line pigging, Intelligent pigging with third party.
Oil/Gas Well testing as per programmed schedule.

EDUCATION & CERTIFICATION:

B.Sc (Chemical) from M.K.University, Madurai with 58.5% Passing in year 1989.
B.Ed (Eng/ Phy. Sc) From M.S.University, Tirunelveli Passing in year 1996.
Member in Indian Institute of Engineering(Chemical).No:-140644/6

ADDITIONAL INFORMATION:
------------
Nationality: Indian
CDC Holer: Bermuda & Liberia
Visa: Mexican, US (C1D) and Schengan.
Reference: Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 10923)

Go to Search Parameters...

Brief Description

Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.

Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control

I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.

Petroleum Engineer

DSV with over 20 years experience.

Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic

I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.

Chemical Engineer with experience operations/erection/commissioning of Oil and Gas,Large Chemical Complex

Conceptual design, front end and detailed engineering of process plants including preparing piping layouts , equipment layouts ,plot plan,Preparing and checking PDS 3D/Auotplant models,Isometrics,Pipe support and stress analysis,MTO,BOM,Manpower Management,to complet project within budget and time

Commissioning, Start up Specialist, Operations Supervisor, OJT, Proactive multi-skilled Team Leader with detailed knowledge of process plant/man-management. HND in Chemical Engg; Valid Offshore Pasport Holder.

I have experience with rotating equipment such as turbine, compressors, motorrs, pumps and gearboxes.

12 years of experience in various design, training and project planning activities which involves Static and Dynamic Stress Analysis of different Nuclear, Petrochemical and Pharmaceutical Piping Systems, Selection and Design of Pipe Supports, Piping Layout design, Isometric Drawings, Integrated Pla

Maintenance & Mechanical Commissioning Supervisor

Proect control enginner cost control and senior planner for EPC projects

Having 15 years of experience as as Design Draughtsman / Autocad Engineer in Oil & Gas, Petrochemical & Manufacturing industries.

QA/QC Manager Welding Engineer Offshore and Onshore

Drilling Excelence Manager for BP Trinidad & Tobago. 10 Years experience in BP as DE/SDE/Org. Capability Manager & Drilling Excellence Manager. 9 Years in Service Company with experience as De/project Manager/Proposal Manager & QHSE Manager.

Project/Engineering Manager, 24 yrs Experience in Oil & Gas (Indian Oil Corporation Ltd.) for Development of Terminals & Gas Stations. Projects involve conceptualizing, engineering, budgeting, estimation, tendering, procurement, fabrication, installation, testing, pre-commissioning and commissioning

Piping stress analysis, finite element analysis using ANSYS, Mechanical design, etc.

Experienced Country Manager, skilled in change and open to multicultural environment.

Design skills in steel and concrete of petro chem and power plants.

Production Engineer resume

I working for Schlumberger Achievement as Crew Chief Wireline Operator. I perform jobs in location. Working in a Team is one of my compliances, most jobs in Cased Hole and Open Hole, and report to Field Engineer

Coatings & Corrosion Engineer "NACE"

I am 44years old and right now I am still working at PT Pec-Tech Indonesia (RGMI Group), current position as “Senior Process Engineer”. Business line of this company is Engineering/EPC As you can see from my enclosed curriculum vitae; I have long and wide experiences (± 19 years) in Operation Pro

Licensed professional engineer with over twenty-seven years of structural design and deliverables production experience for Industrial, Commercial, Residential, Oil and Gas, and Transportation projects

Upstream and mid-stream experience(27 years) plus underground waste water injection

earned master of science at the University of Oklahoma in the subject of rock mechanics. He has been a professor of production, drilling, completion and stimulation for more than 14 years, and he had earned more than 12 years of field experience.

Ph. D. level Materials Scientist looking for a position in research and development of new materials and novel processes for fuel cell, or hydrogen related industry to apply my broad materials working knowledge, materials characterization expertise, equipment design, and patents development skills.

I am experienced in reservoir simulation and numerical modelling, foamy heavy oil flow, well testing analysis, production forecast, horizontal and multilateral wells, thermal recovery, water flooding, PVT sampling and analysis.

I have a PhD in Logistics Management and over 20 years work experience in shipping, logistics, supply chain management, airfreight, sea freight, container marketing & operations, port development & expansion, ship and air chartering, project cargo handling, freight forwarding, etc.

Skilled, knowledgeable, and experienced in organizational assessment, strategic planning, business process reengineering, organization design, and change management in oil and gas related operations including production SBU's, upstream and downstream R&D, MIS, and Finance

I have outstanding experience in the design of high-pressure gas transmission line and its associated facilities in valve stations and also a fuel gas supply line plus governor station to 1800 MW combined cycle power plant in South Korea.

A Procurement/Logistics/Admin Manager of 25 years experience in the O & G industry particularly with FPSO's. Has contracted in Thailand/Singapore/Malaysia/Nigeria/Libya/UAE/Qatar/Scandinavia/Europe.

 Over 21 years of experience in the Petroleum exploration Industry.  Have broad experience in the area of drilling and completion fluid design and formulation in on shore as well as off shore wells.

Senior reservoir engineer: 30+ yrs experience in N. America, S. America, and Europe. Denver-based. Available for contract work, long-term or short-term. Fluent in English and Spanish.

Drilling Specialist for 35 years. Postings have included Worldwide Drilling Manager, In-Country Drilling manager, Drilling Engineer, On-Site Drilling Supervisor and Drilling Consultant. Skilled in foreign start-up operations and training of Nationals.

A versatile and Innovative Chartered Accountant of Nine Years post Qualification experience and Eighteen years on the Job Practical Experience

Over 22 years’ professional experience in Conceptual, FEED, Detailed engineering and project management in Oil & Gas, Refinery, Petrochemical and Chemical projects.

Over 12 years (over 4 Years in Gulf Countries) in pre-commissioning and commissioning, start up, daily plant operation and shutdown activities for large oil and gas, refinery and petrochemical plants.

Project Engineer with Australian education, canadian experience and with very good project management skills.

Pipeline, Facilities and Project Engineer.

12 years experience in Warehousing and Logistics operations from in-bound to out-bound w/ purchasing function

More than 18 years of design experience in oil and gas production, gas processing, LNG Production, and projects of refinery, petrochemical and chemical industries. Specific experience in front end and detail engineering, process engineering/flow schemes development, process data sheet preparations

Good working experience on Instrument and control system

Senior Mechanical Piping / Stress / Equipment Engineer BS in Mechancial Engineering USA National

8yrs of working experience in the field of HVAC & Duct Manufacturing. M.S. from KFUPM. B.E. (Mechanical). Areas of Interest Heating, Ventilation and Air-Conditioning. Indoor Air Quality. Facilities Management (Inventory, Space, Maintenance,

QA/QC Enginner

PMO, Planning, Project manager, Program Director

Reliability, Maintenance, Planning and Material Engineer- Mechanical

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out