Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #86596 next resume »»
CONTACT INFORMATION:
View contact information...

Classifications: Licensed Journeyman Electrician of Oklahoma- Lic# 64828
Licensed Journeyman Electrician of Colorado- Lic# 13526
Licensed Journeyman Electrician of Wyoming- Lic# J-17270
Licensed Journeyman Electrician of Utah- Lic# 7061058-5504
Licensed NCCER - Lic# 463642
Certificate NFPA 70E
OSHA Certification, for 10hrs.
MSHA Certification
US Passport

Certifications: Rough terrain forklift, Scissor lift, Boom lift, CPR and first aid training.
Backhoe (case, john deer)

Years of experience: 28 years. Industrial 80%, Commercial 15%, Residential 5%

Education: High School @ Charles Page, Sand Springs, Ok
College @ OSU Technical school, Okmulgee, Ok
ABC @ Tulsa, Ok
IEC @ Tulsa, Ok

References:
Jeff Edwards, Electrician, 918-697-8444
Dan Brown, Electrical Contractor, 918-437-8423
Rick, Construction Contractor, 918-284-7618
Jack Hill, Construction Contractor, 501-831-1946
Erick Fausett, Electrician, 918-812-0718
Jim Lewis, Electrical Contractor, 918-317-2403
Ronnie Raines, Electrical Contractor, 972-272-5595
Jimmy Strawn, Field supervisor, 214-9261364
George Karanaoff, Field Supervisor, 432-894-6699

Employment History:

KBR, Houston, Tx

Job Type: Army Electrical support, Iraq
Position: Journeyman Electrician
From 1/09 to Present
Rate: $21.63hr.
Work performed: electrical up keep on panels, army barrages, generatered
Electrical systems and back up systems.

T I C, Steamboat, Co. ( Climax mine Project- Mine Closed down)
719-395-8932

Job Type: Surface Mine
Position: Journeyman Electrician
From: 11-3-08 to 11-08
Rate: $28.00 hr
Work Performed: Installation of electrical equipment, pull wire, terminate

Hettinger Welding, Big Piney, Wy
307-276-4170

Job Type: Compressor Station
Position: Journeyman Electrician
From: 10-02-08 to 10-27-08
Rate: $30.00hr
Work Performed: Install conduit, terminate wire of all sizes, Controls

Unity Electric, Seattle, WA (Olivian Project)
206-940-3236

Job Type: Commercial
Position: Journeyman Electrician
From: 8-5-08 to 10-08
Rate: $32.00hr.
Work Performed: Working on high-rise Condos, Installing Panels, running
Mc and terminations

Utah Valley Electric, Salt Lake City, Ut
801-294-2602

Job Type: Commercial
Position: Journeyman Electrician
From: 7/14/08 to 7-29-08
Rate: 30.00hr.
Work Performed: Working on commercial buildings (motels and condos)
Terminations, installation of electrical equipment, terminations, installing
New service, running backhoe.

Hettinger Welding Electrical Division, Big Piney, Wy
307-276-4170

Job Type: Compressor Station
Position: Journeyman Electrician
From: 6-2-08 to 7-1-08
Rate: 30.00 hr.
Work Preformed: Installation of Electrical equipment, High Voltage
Terminations, Transformers, conduit rigid, and controls

Sea-Tac Electric, Seattle, Wa. ( Safeway Project)

Job Type: Commercial
Position: Foreman
From 3-24-08 to 5-30-08
Rate: 33.00hr.
Work Preformed: Planning and layout of job, order material as needed,

Saulsbury Electric, Odessa, Tx ( Cortez, Co. Kinder Morgan Job )
432-366-3686

Job Type: Compressor Station
Position: Foreman / Journeyman Electrician
From 1-08 To 3-19-2008
Rate: $27.00 hr.
Work Preformed: Planning and layout of job. Assign tasks. Go over prints,
Loop drawings, interconnect drawings. Over see the Terminations of stress
Cones. For MCC gear.

I C A T S, Broken Arrow, Ok (Rawlins, Wy Sinclair Project)
918-494-0969

Job Type: Oil Refinery
Position: Journeyman Electrician
From: Nov, 07 to 1-08
Rate: $32.00hr.
Work Preformed: Instrument Tech., Installation of conduit, cable tray,
Terminations of controls,

MMR, Batrouge,La. (Tulsa,ok Sinclair Project)
615-631-9577

Job Type: Oil Refinery
Position: Journeyman Electrician
From: 11-07 to 6-08
Rate of Pay: $20.00hr.
Work Preformed: Installation of Conduit, Terminations of controls and High
Voltage wires. Trouble shoot systems out. Read blueprints and carry jobs out.

ISC, Batrouge, La. ( Meeker, Co. Project and Opal, Wy Project)
225-756-8001

Job Type: Compressor Station
Position: Journeyman Electrician / Foreman/Instrument tech.
From: 2-07 to 4-07 (personal reasons at home) From 8-07 to 11-07
Rate of pay: $30.00hr.
Work preformed: Plan and layout, over see job, order material, time sheets.
Also terminated control wires as a tech.

Triad Electrical, Batrouge, La. ( Valliant, OK Project)
225-927-8921

Job Type: Paper Mill
Position: Journeyman Electrician/Instrument tech.
From 7-06 to 1-07
Rate of pay: $26.00hr.
Work preformed: Controls terminations, High voltage terminations,

MMR Group, Batrouge, La. ( Tulsa, OK job)
615-631-9577

Job Type: Oil refinery
Position: Journeyman Electrician/Foreman
From 12-05 to 7-06
Rate of pay: $20.00hr.
Work preformed: Installation of conduit ( rigid ), pull wire, pull thermal
Couple wire, fiber optics, terminations of all panels, and motors.

Colburn Electric, Broken Arrow, Ok ( Catoosa,OK job )
918-251-8765

Job Type: Commercial/ Industrial
Position: Journeyman Electrician
From 10-05 to 12-05
Rate of pay: $21.00hr.
Work Preformed: Installation of panels, distribution equipment and
Terminations.

Field Electric, Stillwater, Ok ( Stillwater, OK job )
405-372-5413

Job Type: School add on
Position: Job foreman and Journeyman
From 7-05 to 10-5.
Rate of pay: $21.00hr.
Work performed: Assigning task, keeping materials ordered as needed,
And attending weekly meetings.

Double R Electric, Garland, Tx. ( Mc Clester, OK and Fredricksburg, TX )
972-272-5595

Job Type: Commercial
Position: Job Superintendent
From 11-04 to 7-05
Rate of pay: $25.00hr.
Work Preformed: Assign tasks, go over jobs with foremans, hiring as needed for jobs require, attending weekly meetings,

TIC, Steamboat Springs, Co. ( Denver, CO. job )
970-879-2561

Job Type: Oil refinery
Position: Journeyman Electrician
From 9-04 to 11-04
Rate of pay: $20.00hr.
Work Preformed: Installation of conduit, panels, switchgear, pull wire,
Terminations of high voltage switchgear and low voltage.

W.W. Enterprises inc., Muskogee, Ok ( Catoosa, OK and Kansas job )
918-681-2100

Job Type: Dams in Kansas (Security Equipment)
Position: Journeyman Electrician
From 3-04 to 8-04
Rate of pay: $20.00hr.
Work preformed: Installation of electrical equipment, raeways, pull wire,
And terminations of main switchgear and panels.

Central Electric Co., Tulsa, Ok
918-437-8423

Position: Journeyman Electrician and Job foreman
Work preformed: Installation of electrical equipment, raceways, pull wire, and service work.
I also run jobs with this company, from small commercial to large jobs.

Colburn Electric, Broken Arrow, Ok
918-251-8765

Position: Journeyman Electrician and Job superintendent
From 9-02 to 10-03
Rate of pay: $21.00hr.
Work preformed: Installation of equipment, raceways, pull wire, and
Service work.
I also run jobs on the Lowe's project.

Oil Capital Electric, LLC., Tulsa, Ok
918-317-3255

Position: Journeyman Electrician and Foreman
From 7-98 to 8-02
Work preformed: Installation of electrical equipment, raceways, pull wire,
And terminations. I also foreman at Williams tower in Tulsa, Ok
Under superintendent Ron Biffus.

Electrical equipment associated with:

Main switch gear, disconnects from 30a. to 1200a., transformers, generators,
ATS gear, UPS systems, switches.

Tools for the job: Hand benders, electric benders, auto benders, meters, meggers.

Material used: Rigid, robroy, emt, pvc, explosion prove boxes and seal offs.

I am currently working in Iraq, if you would please contact me thru my website.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 5151 to 5200 of 10926)Go to Search Parameters...
Brief Description
PLANNING ENGINEER: Liaison with Client, Consultant, Sub-contractors and Internal departments to get complete information on assignments for further instructions to Project Engineers. Conduct daily planning/production meetings with Site Manager/Project Engineers for discussing critical activities
Process Engineer in Refinery, Oil&Gas and Petrochemical Industries
Construction Mgr.- Piping Eng.
Senior Electrical Control Eng. / PLC Programmer / Scada System Specialist
Relay Protection coordination (by Captor software); motor starting, load flow, fault studies by ETAP software; DBs and MCCs selection; AFD selection and implementation; Frame6 power generation commisioning and maintenance; Switchgears up 110 kV commisioning and maintenance.
v A First class (60%) Bachelor of Chemical (B.E.) engineering graduate from Poona university in 1992, having a total (Cryogenic Air Separation/LNG Terminal & Regasification Unit /Refinery/Petrochemicals) industrial work experience of ~ 12 years.
aws cawi
PDS administration, Complete project setup and support on multiple large scale projects using PDS 7.2, 7.1,7.0 and 6.4 Microstation J/SE, PDS Piping specifications and RDB Support, Isogen setup and support, INTools support, SmartPlant Review Administration, and other 2D and 3D CAD tools.
Engineering / Construction Mgmt – Over 25 years combined experience supporting large domestic & international project assignments in both Home Office & Field locations. Business lines include Mining & Metals, Nuclear Power, Nuclear Waste Handling, & Refinery / Chemical (Oil / Gas, & Hydrogen) Plants
Industrial Journeyman Electrician-28 years
I have 18 years experience in the Oil Service Industry, involved in all aspects of Coiled Tubing, Nitrogen Services, Fluid Pumping, N2/He Leaktesting(HLD), Pipeline Pigging/Testing & Well Testing. My last permanent position was Service Supervisor II for Halliburton Coiled Tubing in Australia. Since
Experienced Senior Civil/Structural Designer with mostly Petro-Chem background
Present Bachelor of Petroleum and Natural Gas Engineering (Designing counstruction and exploitation of oil and gas pipelines,piping and storage facilities faculty )
Rotating Equipment Engineer
Chemical engineering degree in oil&gas field, experiance at project engineer and vice-project manager, control project, cost stimate, coordinate engineering desceplin, etc.
Senior technician instrument
I would like to announce my availability to any professional company in need of a Senior HSE Officer with an Engineering and Medical Degree. My vast experience and capabilities and the ability to get along with people will prove to be an asset to the company, client and workers. As a professional,
Linux, Ansoft designer, Auto CAD, C++ and Microsoft Office
MECHANICAL ENGINEER & QUALIFIED ASNT LEVEL II IN UT.RT,PT & MPT....
Welding inspector
Lease Acquisition
Dear Sir, I believe that I have the capabilities and the experience that enable me to match the requirements of this job. I have had a considerable experience in many companies and many domains.
Seeking challenging assignments as PDS Structural Designer and Senior Draughtsman with a reputed organisation in the Construction Industry.Based on my skills in Civil/Structural Designer Using Application PDS, SPR, AutoCAD, Microstation, I am confident that I would be a great addition to your team.
Apply for post of Electronics and Instrumentation engineering
i am graduate from electrical engineering and i,m good at computer . i have ability to work any time and any place
18 Years of experience in Electronics & Instrumentation field at supervisory level in Construction & Maintenance, including 3 ½ Years of Gulf Experience. Known for superior integrity, accommodative nature, sincere & honest team member.
In June 2003, I completed Diploma in Mechanical Engineering from M.S.University, and recently I passed NDT LEVEL II Examination from FLAWTECH INSPECTION SERVICES. And I have 3 years work experience in mechanical field.
strong drilling, geological, petrophysical, coring/core analysis, OH/CH log interpretation & reservoir studies background,worked with Halliburton,Reslab,QP & Schlumberger,Involve in Operations/Well Site/Petroleum Development,reservoir characterization,Image analysis, FMI/OBMI/MSD,Mentor &training
ROV Pilot/Technician with two years experience on workclass ROV
SKILLS: Pipefitting and related works.
drafting 3D and 2D modeling and design of some plans from field work, mechanical, structural in different applications such as Cadworxs P&ID 2009, Cadworx Plant 2009, Autocad 2008
Completions Engineer, Mechanical Engineer, Technical Sales Representative
Piping designer
Skilled in Electrical and Instrumentation Systems, associated with sensors, machines, electrical generating units and switchgear systems and programing and applications of PLC, DCS
Experienced Oil and Gas HSE professional
I am an Italian naval architect. I graduated from The University of Genoa specializing in Marine engineering and naval architecture
Bachelor in Chemical Engineering (Co-op option) (University of Ottawa, Canada) Hard worker, enthousiastic.
Major Course Work: Process Heat Transfer, Chemical Engineering Plant Design I, II, and III, Kinetics and Reactor Design, Process Dynamics and Control, Mass Transfer, Unit Operations, and Chemical Economics and Design
Exp.Mechanical & construction manager in Oil & gas , more that 26 years of work with big oil companies.High educated with MSc in Mechanical and offshore engineering from Robert gordon Uni /Uk.
7.5+ years of Control System Enineering experience with Global Control System leaders(INVENSYS-TRICONEX IPS/FGS,YOKOGAWA Prosafe ,CS3000,HIMA-IPS,EMERSON-DELTA V Systems)
As a Instrument supervisor to lead the work crew and holding the responsibility to complete the job with standard ¡§HSE¡¨ practices as per the strict ¡¥Shell¡¦ safety norms of Petroleum Development of Oman. And also involved in Installation, calibration, loop checking, Pre commissioning, etc..
Cementing Engineer
holding 3 yrs diploma in hotel management and catering technology with more than 8 yrs exp. in catering field
Working in QA/QC
Currently working in the North Sea as a Slickline Supervisor on an Ad-Hoc basis.
PDS &piping drafter
B.Tech Chem engg + MBA (marketing) with 10+ years in Project Management in O&G / Petrochemical Projects
QUALIFICATIONS : M.Sc. (Geology), Skill : Geologist, Mudlogger, Geotechnical Engineer
Good knowledge of Environmental Impact Assessment (EIA), HAZOP, Risk Assessment, Safety Audit, Environmental Audit, & Various Safety Techniques Like; International Safety Rating System (ISRS)-By DNV, Process Safety Management (PSM) etc.
Graduated Mechanical Engineer,Certified Caterpillar Engineer, Experience as a Field Engineer in the Gas & oil, Marine,Mining Industry
First   Prev   101   102   103   [ 104 ]   105   106   107   108   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   128   129   130   131   132   133   134   135   136   137   138   139   140   141   142   143   144   145   146   147   148   149   150   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com