Resume - Hand Millwright in Boiler Area there my responsibilities are Erection of forced ...

Misco Jobs

Resume #86894

CONTACT INFORMATION:
View contact information...

Charge Hand Millwright

Academic Qualification
Matric (Science) BISE Lahore 1998 60%
Ielts British Council Lahore(Pakistan) 5.5
Technical Education
Mechanical Fitter TEVTA(Technical Education & Vocational Training Authority) 1999 to 2002 85%

Computer skills
„« Windows 2000 Professional & Internet
„« Microsoft Word
„« Microsoft Excel
„« Microsoft Power point
„« 2D 3D drawings

Technical Skills

„« Diagnose the problems
„« Mechanical Power Transmissions
„« Fire fighting training of 15 days from ATLAS HONDA LTD.
„« Check the quality during erection of pumps/motors/gearboxes & bearings monitoring.
„« Maintain the preventive maintenance
„« Fire fitting training from Equate (Kuwait)
„« Rotary equipments alignment with Laser

Major Working Subjects
„« Gear Box Drives
„« Quality check with all measuring instruments
„« Pneumatic and hydraulic Control instruments
„« Technical Drawings

Experience
„« 03 Jan to prasent I am working in CCIC at Borouge EU2 Project Abodhabi as a Charge Hand Millwright in Boiler Area there my responsibilities are Erection of forced Draft Fan and Fuel Gas Recirculation Fan. Alignment of Fan, Clutch, Gear Box and Steam turbine with reverse dial indicator method.

„« I was working in Kuwait from 13-01-2007 to 22-06-2008 as a Millwright Fitter in CCC (Consolidated Contractor Company)in Equate acetylene gas project there my responsibilities were erection of rotating equipments steam turbines, pumps, compressor. Check and maintain the preventive maintenance of all rotary equipments. Alignment of all rotary equipments with dial indicator and laser.

„« I worked as a Millwright Fitter in Atlas Honda from 23-07-2002 to 18-05-2004 at Sheikhupura 500k project there my responsibilities were erection of compressors and generators as per drawing. Alignment of rotary equipments with dial indicator with the reverse dial indicator method. Check and balance of all equipments at monthly and yearly basis. Installations of new equipments and arrange all necessary requirements.

„« I worked as a Millwright Fitter in ICI Polyester from 20-05-2004 to 25-05-2005 at Sheikhupura plant there my responsibilities were erection of rotary equipment and alignment of rotary equipments with dial indicator.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5251 to 5300 of 10917)

Go to Search Parameters...

Brief Description

Total Eight and half years of Engineering, Commissioning and Maintenance experience of DCS/PLC in a petrochemical industry

Discipline leadership and management. Ten years experience in Oil, Gas, and Industrial Instrumentation and Control. Client based engineering experience. Major Projects include FEED, detailed design, construction, testing, commissioning of onshore and offshore facilities. Capital works projects.

14 years of successful work experience in Oil & Gas Reservoir and Production Engineering along with strong experience in Reservoir Management, Field Development and Field Operations

look at next resume

Assembles and installing conduit wire, power cables. Install control and distribution apparatus. Read labels manuals and schematic diagrams. Install electrical motors (0.25-850 kW). Work with power tools and measuring instruments.

7 months Trainee at the International Institute for Geo-Information Science and Earth Observation (ITC), The Netherlands. Educational assistant first-year practical “Rocks, Maps and Profiles” '02, Part-time field assistant '99-'01. Member of the board of the Geological Society of Utrecht,'99-'00

NTNU, Trondheim Norway, June 2005

piping designer, my expereince included piping design, piping stress analysis and purchase docs preparation

Post-graduate in Marketing Management from a reputed institute in India. Experience of 14.5 yrs in Sales and Marketing. Exposures in the areas of Rural Marketing, Product sales, launch of a new product, Sales promotion, design & develop various sales promotional strategies & Supply & trading

Experience summary: Mergers and Acquisitions Advisory, Investment Banking, Valuations, Strategy Formulation and Implementation, Quantitative Analysis, Budget Planning, Commerical Proposals, Business Development, Competitve Strategy

I’m a polyvalent engineer (Drilling engineering degree, Pipeline and fluid engineering degree, and technician in Mechanics (Engines)). Boarding a solid experience in onshore drilling horizontal conventional and UBD wells (Drilling operations, Engineering, planning…) in Hassi-Messaoud- Algeria.

Electrical

Master Data Management

Mechanical Applications : PVElite 2009 & Code Calc 2009, Compress 6261

Planning, Material Mobilization,Installation & Execution, Testing & Commissioning, Documentation and Reports, Operation & Maintenance.

Hand Millwright in Boiler Area there my responsibilities are Erection of forced Draft Fan and Fuel Gas Recirculation Fan

Diplomed petroleum engineer , interested in finding a you in this field

Seeking an opportunity in industrial painting where I can apply my past work experience and be an asset to the company.

Instrument Technician/Senior, 16 years exp - FPSO exp, Offshore survival and medical, seeking an offshore position on a rotating schedule. Ex Hazardous, SEP, STOP, A+ & N+ computer skills, calibration, faultfinding, troubleshooting,loop testing, foxboro, plc, dcs, scp.fire and gas, safety, drawings

Mechanical Engineer

A highly motivated Instrumentation Engineer, experienced in electronic, pneumatic & smart instruments having Ten years of experience with Oil companies & multi-national companies.

Wellsite Geologist (Geological Operation)

I’m Petroleum Engineer. I have Bachelors degree in Petroleum Engineering. From the beginning of year 2008. until now I work as Pipeline Engineer in company SAIPEM ( member of ENI group).

Mechanical Engineer, Project Manager

A highly talented designer in the area of pipe for petrochemical complex. Using the information supplied by engineers and equipment vendors. Experience to work on P&ID's, vessel structural detailing, GA's, isometric piping, 3D structure design.

Senior Estimation Engineer for oil and gas construction projects

Experienced Supply Chain and Strategic Sourcing Specialist with Big 4 Consulting firm

I have over 9 years of experience working in the major international oil and gas projects participating in the activities at the different phases of a project. The areas of my expertise are: Maintenance activities support, Implementation of maintenance data base in CMMS

Experienced with Microsost Office, ie Excel, Word, PP, Access.

25+ years Upstream Project Controls Management across all stages of Oil & Gas E&P Business Process Life Cycle:

Over 8 years of experience both as a QA Inspector and QC Inspector in Welding and NDT Inspection in different Sectors of Engineering & Construction like LNG tanks, LPG Spheres, Chemical plants, Power Plants, Fertilizers Manufacturing Industries, Refineries, Shipyards, FPSO Conversion projects, Oil R

PDMS,Auto Cad,Hypermesh,

Cementing Engineer, Technical Professional

I am currently a process operator at Hovensa LLC, a 495,000 bpd refinery, located in the U.S.V.I. I am certified to operate both crude and vacuum units and am training to certify on an amine reclaimation unit. Job skills and responsibilities are listed on attached resume.

Chemical Engineer from Venezuela with unfinished MSc, FLAIR Operator in Geoservices, marketing research experience on Plastic Industries, Reservoir Simulation experience from PDVSA-INTEVEP. Interested to work worldwide, specially Australia.

Passed out Diploma in Instrument Engineering through NATIONAL POLYTECHNIC from July’ 1993 to May’ 1995

I am a QA/QC Engineer with over 8 years experiences currently work in Saudi Arabia as a Senior QA/QC Engineer ( QC Supervisor ARAMCO SAP No. 70009461 in GAS Plant ( 3 Sulfur recovery units and 3 Gas Sweetening Units...) Kindly check the attached CV for all details.

Preparing quantity schedules and bills of materials managing project costs and performing cost analysis. Managing different project quantities related to the implementation of the project such as, materials, equipment and resources. Forecasting project quantities and ensuring that construction costs

Directional Driller 7 yrs Exp.

B.sc(Hons) chemical engineering with 7 yrs Experience in Drilling Fluids Technology

Material Engineer (Cathodic protection, corrosion, coating and painting)

Piping designer with 10 years experience of Oil & Gas, Petrochemical & Manufacturing industry.

Familiar work with computer office and internet

Electrical, Instrument, Electronics Engineering 20+ years

Working as: Heath Safety and Environmental Engineer for Snamprogetti S.A. Ltd At Saudi Aramco

ELECTRICAL & ELECTRONIC ENGINEER/SAFETY OFFICER

I am a graduate of Geology from Olabisi Onabanjo University,Nigeria.I have my Master's in poetroleum Geology/Sedimentology from the University of Ibadan.I am proficient in the use of Microsoft office Suite.

5 years working experience as Draughtsman in construction, Oil and Gas indutry and steel fabrication.

HND Elect/Elect. Engineering[Telecommunication option].

Most of my experience includes researching abstract and running title in Texas and Louisiana. My experience also includes working as both a mineral agent and perimit agent for 3-D seismic. I have 3 yrs total experience in the business. Most recently I worked doing field due diligence in Louisiana.

First Prev 101 102 103 104 105 [ 106 ] 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out