Resume - Proficient in Integraph Plant Design System (3D PDS) and its software including ...

Misco Jobs

Resume #86969

CONTACT INFORMATION:
View contact information...

POSITION DESIRED

Piping Design Engineer/3D PDS Piping Designer

EDUCATION

Bachelor of Science in Mechanical Engineering
Mapua Institute of Technology
Muralla St., Intramuros, Manila, Philippines

PROFESSIONAL LICENSE

Registered Mechanical Engineer, RME
Professional Regulation Commission, PRC
PRC Licensed no. 0069036

SUMMARY OF EXPERIENCE

Has more than 5 years worked experience particularly in piping designs for petrochemical plants. Was assigned on a project as 3D PDS Piping Designer, capable of doing piping layouts, details, piping support and piping isometric drawings. Work involves equipment modeling, 3D PDS piping design (model) using Intergraph PDS, isometric extraction, and general piping arrangement using PD draw (drawing manager). Responsible in squad checking of civil / structural drawing, electrical cable tray and vendor data. Responsible in checking interference problem using Interference Manager. Extraction of PDS report such as equipment and nozzle location report. Complete understanding and application of technical principles, theories and concepts in the field. Coordinate and interface with other discipline and deals project carefully to complete at required schedule and capable of working different kind of people. Proficient in Integraph Plant Design System (3D PDS) and its software including Piping Designer, Equipment Modeling, Microstation, AutoCAD, SPR (Smart Plant Review), Batch Manager, Isometric Extraction and knowledge in Microsoft Windows.

SPECIFIC EXPERIENCE
FLUOR DANIEL, INC.-PHILIPPINES
3rd Floor, Asian Star Building
Asean Drive Filinvest Corporate City
Alabang, Muntinlupa City 1781

Saudi Kayan Petrochemical Complex Project
Al-jubail Saudi Arabia
Workshare with Fluor Saudi Arabia
Piping Designer

Prepares hydro-test packages & test flow based on fluor furnished hydro-test diagrams and coordinate all activities involved in the test packages and punch list. Review the P & ID in conjunction with the piping specification to verify pressure test package limits. Prepares sketches/revises construction drawing to reflects " AS BUILT " condition for preparation of line checking/punch listing through isometric drawing or P&ID. Reviews/approves test packages for completeness of content and for latest revision of documents used. Keep all relevant documents and records of completed works. Prepare line check reports and record as required. Uses PROARCWEB for clients/vendors documents verifications

VOC Abatement Project
Workshare with Fluor South Africa Office
Piping Designer

Responsible for the layout and design of piping and equipment modeling, It also includes the modification and re-modeling of piping that deals with resolving clashes and piping design using Plant Design System (PDS). Prepares flow diagrams of existing equipment, pipings, Perform design checks on all piping and equipment @ designated areas and see to it that the materials are within the specification requirements and also ensure that the process requirements and design criteria are complied.

Dow Corning
3rd Pillar Phase II Project
Office Location: 7F Dawning Center
No. 500 Hong Bao Shi Road
Shanghai 201103, China
Piping Designer

Was assigned in Shanghai China, Worked as a primary designer responsible for initial 3D piping and equipment modeling and initial layout of pipelines based from piping plans. Check, back check and correct assigned piping models, drawings and isometrics including plant equipment against latest vendor drawings and standards. Included in my tasks is production of piping isometrics. I am also tasked with the squad checking of shop and fabrication drawings of equipment as tanks, vessels, pumps, exchangers and the other equipment for design and procurement. Check isometric Material Take Off against standards and specifications for both project and company. Layout equipment plot plans and principal pipeline routing design.

LDK Polysilicon Project
Technology Co., LTD
(May2008 - Feb2009)
Project Location: Xinyu, Jiangxi, Peoples Republic of China, PRC
Piping Designer

Worked as a piping designer in Tri-chlorosilane Tank farm (TCS) and HCL Absorption Drying Unit doing detailed design engineering using 3D Plant Design System (PDS) Intergraph, was assigned in sump pump, tempered water skid and doing a layout of utility stations, responsible for piping design developments and lay-outs, equipment modeling, review of vendor documents and the production of piping isometrics and piping general arrangement drawing. Perform other task such as Stress Sketch issuance and MPS (Miscellaneous Pipe Supports) sketch, updating Model Status Records, squad checking the equipment vendor and other information from other discipline. Performed clash checks using Interference Detection Process(IDP) and resolving all that clashed. Provide self checking, back drafting, and correct assigned piping models, drawings and isometrics. Provides solutions to a wide range of complex problems under general direction.

Tasnee SPC Polypropylene Expansion Project (petrochemicals)
(July 2007 - May 2008)
Project Location: Al-jubail, Kingdom of Saudi Arabia
Piping Designer

Designing of piping system of Carrier Gas Compressor Area and Dry Flare Header based on P&ID, Check, back check, and correct assigned piping models, drawings and isometrics. Generating Quality Isometrics in line with project standards, projects specifications, ASME B31.1 and ANSI. Resolve model review comments as per Client, Home Office and Internal Office. Prepares material take-off/bill of material from P&ID's, piping drawings, and isometric etc. Designs components or portions of systems, and modifies existing designs to develop or improve them.

Review project specifications, administrative and technical practices, design instructions, plot plan, flow diagrams and supplier information. Squad checking of vendor Information on Equipments and Tie-In Pipings.

Tesoro Project Golden Eagle Refinery, 150 Solano Way, Martinez, California
(January 2007 to July 2007)
Project Location: 150 Solano Way, Martinez, California
Piping Designer
Drafter IV

Assigned as PDS Designer for the Coke Drum Structure. Reviews project specifications, administrative and technical practices, design instructions. Prepares special support and submit to structural group. Production of piping isometrics. Identifying the locations for the utility stations. Studied specifications in preparation of design drawings. Gathered informative data pertinent to the piping plan. Prepared layout of equipment and piping system in accordance with the approved and most current information. Assisted equipment engineers in finalizing the equipment layout. Interpreted stress sketches. Communicated with area supervisors for vital client information. Prepared and completed piping drawings, isometrics. Performed other task as may be assigned by superiors.

Tesoro Project Golden Eagle Refinery, 150 Solano Way, Martinez, California
(August 2006 to January 2007)
Project Location: 150 Solano Way, Martinez, California
Piping Designer
Drafter III

Worked as a piping designer responsible for the Coke Drum Structure particularly in process lines and steam purge lines, responsibilities include the development of detailed design project piping model. Prepares, isometrics drawings, stress and material sketches. Check, back drafting and correct assigned piping models, drawings and isometrics. Check other department design drawings and supplier equipment drawings. Update master P&ID and location control plan as directed by the supervisor. Resolves piping clashes using Interference Detection Process (IDP) and updates Pipe line Status Report (PLSR) regularly. Prepares material take-off/bill of materials from P&ID's, piping drawings and isometrics, etc. Reviews project specifications, administrative and technical practices, design instructions, plot plan, flow diagrams, and supplier information.

Equate Petrochemical Company, (DOW/PIC-OL2K PROJECT)
(October 2005 to August 2006)
Project Location: Shuaiba, Kuwait
Piping Designer
Drafter II

Worked as a piping designer doing detailed design engineering using 3D Plant Design System (PDS) Intergraph, was assigned in CW/SW(Cooling Water/Sea Water) Plate and Frame Exchangers, responsible for piping design developments and lay-outs, equipment modeling, review of vendor documents and the production of piping isometrics and piping general arrangement drawing. Perform other task such as Stress Sketch issuance and MPS (Miscellaneous Pipe Supports) sketch, updating Model Status Records, squad checking the equipment vendor and other information from other discipline. Provide self checking, back drafting, and correct assigned piping models, drawings and isometrics.
Resolves piping clashes and coordinate with counterparts and other engineering disciplines to resolved queries.

Process Graphics Designer
Drafter I
June 2004 – July 2005

Worked as a Process Graphics Designer, has a experience in the Detailed Engineering and Design, developing and updating Piping and Instrumentation Diagram/Process Flow Diagram (P&ID/PFD's), involves interpretation and revision of P&ID and PFD in various projects, propagates drawing and resolved existing errors. Knowledgeable in using various softwares such as PDS2d, AutoCAD with rebis, Microstation.
Had undergone training in the mechanical discipline, designing and sizing a vessel using software called Compress. Also, software called FD Vessel is an AutoCAD based drafting program, developed by Fluor, which can be used to generate full-scale mechanical engineering drawings.

PROJECTS INVOLVED:

Valero Refining Company-Texas
(June 2004 – August 2004)

Involved in the development of P&id's, done drafting and backdrafting, works in the Process Graphics including mark up drawings of P&ID's using AutoCAD w/ rebis.

Conoco Phillips – Lake Charles/Sweeny ULSD and BP Toledo Ohio, U.S.A.
(Sept. 2, 2004 – Sept 30, 2004)

Involved in the project as part time designer, updating and developing P&ID's / PFD's using AutoCAD.

IIP TEAM (SLIC) Shanghai Lianheng Isocyanate Company Ltd., Shanghai, Peoples Republic of China (Huntsman)
(October 2004 - December 2004)

Worked as a graphics designer, involves interpretation and revision of P& ID's / PFD's (using PDS2D), drafting, backdrafting, backchecking, performs propagation and convert drawings to PDF file.

Equate Petrochemical Company, Kuwait (DOW/PIC-OL2K PROJECT)
(January 2005 – July 2005)

Involved in the FEED (front end engineering and design) phase of the project for utilities and infrastructure, responsible for updating p&id's/pfd's using Microstation.

TRAININGS:

Piping Design Course Phase I & Phase 2 - Basic Piping Training:

* Introduction to pipe
* Pipe Supports
* Simple Isometric & Ortho Projections
* Piping Material Specs
* Flow Diagram
* Material Take-off
* Stress Sketch
* Introduction to instrumentation such as:
* Flow Instruments
* Level Instruments
* Pressure Instruments
* Temperature Instruments
* Control Valve Manifolds
Automation Tools such as:
* Microstation V7.1
* 3D PDS (Piping Modeling, Isogen)
* Compress
* Smart Plant Review
* 3D PDS Equipment Modeling
* Autopipe Software Ver.8.50
* AutoCad
* Interence Detection Process, IDP

Basic Stress Engineering:
* Thermal Expansion
* Pipeway Study
* Support and Pipe Spans
* Equipment
* Piping Designer Stress Responsibilities

Advanced Stress Engineering (Autopipe Software Ver. 8.50)

During training, perform analysis and calculation of a piping system and give necessary recommendations regarding flexibility and supporting. Give requirements for reinforcing at branch connections, the design of special supports. Generates isometric drawings/sketches for stress analysis and analyze/interprets results. Generates results- report and document all necessary information per stress calculation package. Locates expansion loops, springs, anchors and guides. Calculates equipment nozzle loading WRC107.

* Other relevant training includes P&ID usage, Discipline Interface, Knowledge of Standard and Specs, Designer Self Check, Miscellaneous Pipe Support Procedures, Pipe Routing Lessons Learned, Interference Detection Process (PDS), Squad Checking (Vendor, Plan etc.), Schedule, Cost and Material Awareness.

PROFESSIONAL ASSOCIATION

Member, Philippine Society of Mechanical Engineers (PSME)
Member, National Association of Mapua Alumni (NAMA)

SPECIAL COURSE TAKEN

AutoCAD (Level I Rel. 14)

Advanced Business Consultancy Centre (ABCC), Phils., Inc.
Batangas City
June 19, 2001

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5901 to 5950 of 10816)

Go to Search Parameters...

Brief Description

11+ years of experience in Procurement, Materials, Inspection & Expediting positions

Management of QA (Quality Assurance), Planning, Scheduling & Project Control

Chemical Engineer, Drilling Fluids Engineer, Process Engineer

Procurement specialist with supply chain experience. I am versatile, bilingual(spanish),proven difference maker and leader.

Cost/Budget Controls Manager

Proficient in Integraph Plant Design System (3D PDS) and its software including Piping Designer, Equipment Modeling, Microstation, AutoCAD, SPR (Smart Plant Review), Batch Manager, Isometric Extraction and knowledge in Microsoft Windows.

I have completed my diploma & degree. I have completed my NDT ASNT Level 2, I have more than 5 years experienced in the field of NDT technician.

Troubleshooting Specialist with years of experience in installation, commissioning, regulatory documentation, project management, high-profile customer services, and a proven background in all aspects of electronics and control systems.

Instrumentation Graduate with hands on exposure in PLC programming and commisioning of PLC based Systems espescially,GE Fanuc,AllenBradelly,Beckener & Rainer (B&R).Hands on experience in Yokogawa DCS-CS 3000,System Engineering.

Having three years of experience in the field of process engineering, B.E, Chemical

Responsible for actively involvement in the pre-commissioning and commissioning of the worlds largest natural gas plant

As Instrumentation Inspector/supervisor fully involved in construction,precommissioning,commissioning,start-up activities

I have 13 years of oilfield experience as an operator of numerous gas and oil production facilities. I am an innovative thinker with a demonstrated ability to improve production and decrease down time very adaptable to changing projects and work schedules and have a proven ability .

Energetic, sincere and trustworthy

Master Technician (Mechanical)

Corrosion, Lab, Chemist, Oil & Gas

I have done my Bachelor’s Degree in Mechanical Engineering in Bharath Niketan Engg. College,anna university. The page following below contains my detail profile and responsibilities I can handle efficiently in your esteemed organization.

Application For The Post Of Offshore Medic

I am formerly a Sr. Maintenance Engineer responsible for the Maintenance and Project implementation of several Petro Chemical Plants. My responsibilities included supervising anywhere fro 10 to 200 mechanics at any on time. I was also resposible for budget up to 7million US.

I am willing to gain the experiences and applied the knowledges learned at the school. I am interested to do job related in engineering field.

Skills Experience in Oil & Gas Industries & offshore oilfield.

An engineer from evergreen branch (Mechanical Engineering) ready to put the optimum use of my knowledge in any desire discipline.

Prefer well completion, wireline, drilling engineer

Autocad, Pro-e

Seeking a challenging career in leading Petroleum Company as a petroleum engineer, that ýmatches my field of interest in Petroleum Engineering, where my abilities and skills ýcan be developed and knowledge can be applied.

An engineering post-graduate with specialization in environmental engineering. Overall work experience of more than 14 years with majority in Petrochemical.Career Objective-To excel in the field of Industrial Environmental Management by virtue of knowledge, team work and self motivation.

3 years diploma in electrical engineering. Skills: involved in commissioning & maintenance of electrical equipment in upstream oil & gas /petrochemical industries.

Proficient in Excel and in Word. Proficient in Primavera Project Planning software.

Adaptable, Enthusiastic, seeks work in Aberdeen or UK.

A graduate of University of Port Harcourt, Faculty of Science, Department Of Geology (Bs.c Geology) Rivers State, Nigeria. Working currently as a contract staff with Shell Petroleum Development Company Nigeria Ltd.

Over 10 years of experience I have developed a good level of IT skills: I regularly use P3 (Primavera Project Planner), P5, P6 as well as Microsoft Office software.

Senior Pipe Stress Engineer

BS Electrical Engineering, 10 yrs experience instrumentation oil and gas industry, hardworking, computer literate: MS Word/Excel/Projects.

Electrical High Voltage Protection Technician

Specialist of Control System in Designation of Aromatic IV Plant in Borozouieh Petrochemical Complex in Assaluyeh and in consortium with LG E&C and Toyo, Preparation of DCS/ESD Loop/Logic diagram, Instrument Location Layouts.

I have over 13 years experience related to SCR drive Disel Electric Drilling Rigs, both in Service, Manufacturing, and Preventive Maintenance.

Nineteen years experience in mechanical and electrical work offshore Gulf of Mexico

B.com, C A (inter), D C A Having proficiency in the field of accounting and auditing for a period of more than 10 years .

I am currently in my 4th year (finish Sept 2003)of a Masters degree (Meng) in Mechanical & Offshore Engineering at The Robert Gordon University, Aberdeen. Since May 2002, I have worked as a Student Engineer for a large service company within the petroleum industry, Weatherford

Project Information Manager/ Intergraph PDS Administrator & Support

Ø Seeking a challenging position to utilize my education and experience in the field of Pipeline engineering profession. Ø To work in challenging environment and contribute the growth of the organization, to work professionally, honestly and for the prosperity of organization.

Have a lot of experience if field operation specifically with coiled tubing.

Vibration Analyst / Machinery Engineer. 9 Years Experience. Working on Bently Nevada ADRE and CSI RBMWare. Fluent in English.

I also have 7 years of experience in analysis packages like STAADIII & In these seven years of service, I have directly worked in multiple functions proposal Engineering & Detailed Engineering. CAESAR,CFD.I am conversant with packages PRO-E, IDEAS, CFX.

Planning and Cost control Engineer with 10 year experience in Oil, Gas and Petrochemical Industry.

I would like to apply for Network Administrator or Network Engineer post in middle east countries

A keen team player with more than 15 years experience in Project Document Management, solid background in IT support, accounts, project administration, Project co-ordinator, quality control co-ordination and project analysis. Expert in Documentum.

Production Operations Chief in an international oil company with strong experience in artificial lift equipment design and diagnostic, workover rig supervision, production follow-up, costs and investment control, as well as field crews supervision.

Control and instrumentation engineer with good experience in project management ,construction, commissioning in power plants and chemical industries.

I am a Chemical Engineer from Texas A&M University-Kingsville. I have my Masters degree in Chemical Engineering .I have earlier worked with BetzDearborn Ltd. in water treatment field for a 27000 MT refinery. At present I am looking for a job in the Chemical/Petroleum sector.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 [ 119 ] 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out