Resume - Has been working for an EPC company for eight (8) years with experience in handl...

Misco Jobs

Resume #87072

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE:
FLUOR DANIEL ENGINEERS AND CONSTRUCTORS, LTD. (July 14, 2008 to August 13, 2009)
80 Robinson Road #02-00, Singapore 068898

CONTROL SYSTEMS DESIGN ENGINEER II
REC B&I Project – Renewable Energy Corporation – Tuas, Singapore
Actions / Responsibilities
Review and detail check field instrumentation deliverables, (Instrument specifications and datasheets, Bid Evaluation, Supplier Documents) and Construction Design Drawings in accordance to project requirements.
Involvement in Inter-disciplinary squad checking of either engineering or vendor documentation.
Assist the Lead Engineer in the preparation/planning of Engineering Punch list, Deliverables List, Control Schedule and Progress reporting to Project Controls.
Interface with Client, Supplier, Procurement and Expediting.
Review supplier documentation (i.e. Test reports) and conducts incoming and shop inspection for issueance of Inspection Release Certificates/Supplier Quality Surveillance to Suppliers.
Extending support to the Construction Team.
Duration
9 months

CB&I LUMMUS PTE. LTD. (April 2007 to July 13, 2008)
2 Ayer Rajah Crescent, Singapore 139935
MONTARA VENTURE FPSO (Vessel Conversion) – Coogee Resources – Jurong Shipyard
Function
Instrument Engineer
Actions / Responsibilities
Review and detail check field instrumentation deliverables from subcontractors, (Instrument specifications and datasheets, Bid Evaluation, Supplier Documents) and Construction Design Drawings in accordance to project requirements.
Attended Factory Acceptance Test (FAT) for the Cargo Ballast Control System.
Duration
4 months
PETROBRAS FPSO Project (Topside Modules) – Prosafe Production Services – Singapore
Function
Instrument Engineer
Actions / Responsibilities
Involved in the instrument design & engineering of Topside modules for Petrobras Generic FPSO.
Preparation of RFQ (Instrument Specifications, Data Sheets and Requisitions) for the following: Choke Valves, Shutdown Valves, Control Valves, Safety Relief Valves, HPU/WCR/TUTU; Electronic Transmitters, Gauges, Pig Signalers, Level Instruments and Orifice plates.
Initial Instrument Sizing for Control Valves and flow elements using InstruCalc.
Preparation of Bid Evaluation and Review of Vendor Documents
Interface/coordination work with Client and other discipline (Process, Mechanical Electrical, Piping and Civil/Structural)
Checking of Design Deliverables such as Hook-up, Cable Layout, Cable Schedule, Location Plans, MTO/BOM, Cable Block and Termination Diagrams.
Progress reporting
Duration
12 months
JGC SINGAPORE PTE. LTD. (Mar. 2006 to Mar. 2007)
International Business Park {One year assignment}
Singapore
SI Group Asia AP Project - SI Group – Jurong Island, Singapore
Function
Instrument Engineer
Actions / Responsibilities
Prepares Instrument engineering database (Index) taken from P&ID prior to the preparation of board and local Instrument Specification and other related engineering design outputs.
Responsible for the detailed engineering (field instruments) and procurement support (technical evaluation of vendor proposals and vendor document review for field instruments; recommends the most suitable/compliant vendor in accordance to project requirements, Licensors, codes and standards).
Initial Instrument Sizing for Control Valves and flow elements using InstruCalc.
Review of Vendor Documents
Interface/coordination work with other discipline (Process, Mechanical Electrical, Piping and Civil/Structural)
Duration
12 months
JGC PHILIPPINES, INC (Aug. 2001 to Mar. 2006)
Madrigal Business Park, Ayala-Alabang
Muntinlupa City, Philippines
Bapco LSDP and Revamp Project - Bapco – Bahrain
Function
Instrument Engineer II/Assistant Key Person
Actions / Responsibilities
Prepares Instrument engineering database (Index) taken from P&ID prior to the preparation of board and local Instrument Specification and other related engineering design outputs using Intools
Responsible for the detailed engineering (field instruments) and procurement support (technical evaluation of vendor proposals and vendor document review for field instruments; recommends the most suitable/compliant vendor in accordance to project requirements, Licensors, codes and standards).
Initial Instrument Sizing for Control Valves and flow elements using INtools.
Review of Vendor Documents
Prepares design information / requirements of Instrument to other discipline at the early stage of the engineering design.
Prepares I/O Function list, and Alarm set-point list
Prepares list of Instrument wiring and termination diagrams using INtools.
Prepares Instrument Electro-pneumatic/Impulse Tubing/Wiring hook-up drawing.
Prepares Bill of Materials and Bill of Quantity (MTO) based on Instrument layout drawings, detail installation drawings and material specifications.
Prepares Instrument Loop Diagrams using INtools.
Duration
21 months
Sohar Refinery Project - Sohar – Oman
Function
Instrument Engineer I
Actions / Responsibilities
Prepares Instrument engineering database (Index) taken from P&ID prior to the preparation of board and local Instrument Specification and other related engineering design outputs using Intools
Responsible for the detailed engineering (field instruments) and procurement support (technical evaluation of vendor proposals and vendor document review for field instruments; recommends the most suitable/compliant vendor in accordance to project requirements, Licensors, codes and standards).
Review of Vendor Documents
Prepares design information / requirements of Instrument to other discipline at the early stage of the engineering design.
Duration
12 months
Western Libya Gas Project – Libya
Function
Junior Instrument Engineer
Actions / Responsibilities
Prepares Instrument engineering database (Index) taken from P&ID prior to the preparation of board and local Instrument Specification and other related engineering design outputs using Intools
Responsible for the detailed engineering (field instruments) and procurement support (technical evaluation of vendor proposals and vendor document review for field instruments; recommends the most suitable/compliant vendor in accordance to project requirements, Licensors, codes and standards).
Review of Vendor Documents
Prepares design information / requirements of Instrument to other discipline at the early stage of the engineering design.
Prepares Instrument Loop Diagrams using INtools
Prepares Hook-Up Drawings using INtools/AutoCAD.
Duration
17 months
K2U Project- Map Ta Phut, Thailand
Function
Cadet Instrument Engineer
Actions / Responsibilities
Prepares detailed location layout/ plan of electronic and pneumatic field instruments based on information from P&ID, piping layout drawing.
Prepares routing layout of instrument main and branch cables, conduit pipes, air supply lines and pneumatic signals.
Duration
6 months
TOOLS / SOFTWARE EFFICIENCY

Smart Plant Instrumentation 2007; INtools (versions 6.0, 5.3, 5.2) (Instrument Index; Process data & Calculation; Specification; Wiring; Hook-up; Loop Drawing; Browser ; Spec Binder modules; Import Facility and System Administration module)
AutoCAD 2006
Microsoft Office (MS Word, MS Excel, MS PowerPoint and MS Access).
Lotus Notes; Microsoft Outlook
Adobe PDF Writer
Basic knowledge of PDS (Plant Design Systems-Equipment Modeling), Microstation and Smart Plant viewer.
InfoMaker ver. 7

TRAINING
Smart Plant 3D Enterprise (Overview) by Intergraph
Smart Plant Instrumentation Training (June 2007)
ACONEX (Web-based Project Documentation)
Safety Induction Training

NON-TECHNICAL SUPPORT JOBS
Internal Quality Auditor for Control Systems
Organize Company Wide Events/Trainings for Knowledge Management.
Training Coordinator

EDUCATION
Degree in Bachelor of Science in Chemical Engineering
University of Santo Tomas - Manila
(1994-1999)

PERSONAL DATA
Age: 32
Marital Status: Married
Citizenship: Filipino
Religion: Catholic

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6451 to 6500 of 10902)

Go to Search Parameters...

Brief Description

Application for the Post In Engineering Department

Seeking a challenging career with in a reputed Company

This is essakkipandi, I have 6 years experiance in oil & gas industryI am working in Flour daniel India )p) Ltd,Delhi as Instrumentation Designer. I have studied Diplomo in Electrical & Electronics Engineering, Now i am lookink for Instrument designer join in USA.

More than 6.5 half years in Documentation with Oil and Gas Related Projects and have a very good expossure in Programming

Has been working for an EPC company for eight (8) years with experience in handling such projects of different magnitude both Onshore and Offshore, from grass roots to revamps, tender, FEED (Front End Engineering Design) then to engineering & procurement. Knowledgeable in INtools.

Total 9.5 years DOCUMENTATION experience including QA/QC, CERTIFICATION and PROJECT DOCUMENT CONTROL CENTER in GAS and OIL Projects with Multi National Companies.

Engg.graduate with exp.in projects at various Breweries in India

actual position: Senior well site geologist

Senior Qa/QC For Oil/Gas Projects

Qualification; B.Sc (chemistry), Skills; plant operation, precommissioning and commissioning

LP Modeling, Refinery Planning & Scheduling, PIMS, Process Simulation and Optimization

Certified PMP, with Onshore & Offshore Projects Experience with good Communication skills. Qualified Mechanical Engineer with Project Management skills & Leadership qualities.

Diploma in Chemical technology, 14 years oil field operations experience in onshore and offshore in India and State of Qatar

My working career is coverd with Petrochemical plant structural detail design and offshore jacket type platforms basic and detail design.In the field of offshore i am qualified in in-place, earthquake, dynamic, spectral and determinestic fatigue, transportation, lifting and lunch analysis.

Operating reciprocating compressors [5.3mw] and centrifugal compressors [3.5 mw], multistage centrifugal pumps, various types of dosing pumps etc. Handling various liquids such as LPG, naphtha, kerosene, gasoline and gases like refinery fuel gas, hydrogen etc.

A challenging and rewarding position as a Instrumentation Technician in the semiconductor or semiconductor equipment industry.

a team player, dynamic, can work under pressure and divers climatic condition and region, ready to learn and knowledgeable

Piping Engineer - Stress analysis specialist engineer high pressure and temperature piping. Worked with Babcock, Mitsui and presently working with UHDE.

Mechanical Engineer, with over seven years of experience in construction for Petroleum/oil/gas/power industry. I am certified associated welding inspector CAWI. QA/QC experience

My enhanced qualification & vast experience in developing motivational behaviour & team work among the personnel in the field of Industrial Security & Safety will be appropriate for your reputed organization.

Successful Project/Design Engineer experienced in cutting edge engineering technology. Outstanding record of achievement in managing projects from concept stage, to engineering design, to 1st prototype, to final product.

selling ABB Instrumentation Products Range, which includes the Installation, and commissioning.

An experienced geophysicist with a Master's degree in Exploration geophysics and a second-class upper degree (with honours) in geology with interests in field geophysical surveys, seismic processing and geophysical data interpretation.

Camp Supervisor Unit Manager English and French Teacher Sales Representative English Teacher (Sociology and Politics Departments)

With over 8 years of extensive experience in detailed piping design of oil & gas, petrochemical, refinery, onshore plants. Has the ability to do piping layout/design which include pipe support design, MTO check, generation/checking of isometric drawings (isogen)for fabrication.

I'm an apprentice trained Instrument Technician, trained by a major oil company. I have since gained a wide range of experience at technician and supervisor level in both commissioning and maintenance.

As you can see from my resume I am very familiar with engineering work through my education at the University of Pittsburgh at Johnstown and with my employment in different engineering fields after my graduation.

Seeking to advance my Mechanical Engineering career in the Oil and Gas Industry of the Houston, Texas area. I am a quick learner and detailed oriented.

Field Service Technician-National Oilwell Varco. Global installations, upgrades, maintenance, or troubleshooting of drilling equipment. I also served as a Pneudraulics Systems Specialist for the United States Air Force. I repaired and maintained numerous aircraft in adverse conditions.

Recent graduate with an MSc in Environmental Studies (Environmental Management Systems) and a BA(Hons) in European Business Studies. Extremely keen to have the opportunity of working within the any function in the oil and gas industry.

Please accept my resume for consideration.

Throughout the last five years I have gained valuable experience in both the academic and work related worlds and I am looking forward to applying my acquired skills to the position you have available.

Mechanical engineer.

Extensive experience in gas operations,vast knowledge of its systems and procedures.Considerable experience planning, putting together, maintaining and managing new facilities.Superior managerial, organizational and inter-personal skills that produce results.

Free! Experienced LNG and Gas commercial with strong analytical skills and overseas exposure

I am a first class degrees holder in BE (Mechanical) and M.Tech (Energy Systems) and I have 2.3 years experience in the field of piping design and pipe stress analysis engineering and looking for a job in a reputed concern

I want to work in your company to improve professional skills, to obtain an engineering position in a petroleum industry which will enable me to utilize my analytical and interpersonal skills. Engineer with broad experience in seismic exploration, especially in the sphere processing 2D/3D data.

Analysis and Design of various Structures Analysis and design of vessel

Early Career Petroleum Eng, with trilingual (Incl Arabic) and Dual Master's degree (Petroleum and Computer Science).

Heavy Equipment Operator

Radio Operator Offshore

Redress Downhole Service Tools for well testing job such as circulating valves, control valves and safety v alves involved. Function and pressure testing tools, cleaning and buffing tools, back load and unload tools from baskets and containers

I am working with Barrick Gold Corporation, the biggest gold mining company in the world. It is a Canadian company having 4 gold mines in my country. I work in one of the mines as a Mine Safety & Training Officer. I am looking for the job in the gas/petroleum company.

An international, multi-lingual, technically proficient Sales & Marketing professional

I wish to apply for the post of Supervisor Warehouse /Material Specialist or (Buyer) Procurement.

Position as Electro-Mechanical Designer. Open to full-time regular employment or long-term contract arrangement. Extensive experience on CADAM, CADRA and CatiaV4. Also experience with CADEX-CCD and AutoCAD 3-D Solid Modeling. Over 25 years experience.

Senior Instrumentation technical. Diploma in electronics.

I have approximately 12 years experience in oil & gas industry. I am presently considering a position change with a company offering greater responsibility and more career advancement opportunity.

More than three years of industry experience including asset evaluation, reservoir simulation, annual reserve reporting, long term depletion strategy, enhanced recovery evaluations, expert witness testimony, economic evaluation and forecasting.

Russian/English/French speaking SAP materials controller.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 [ 130 ] 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out