Resume - Knowledge & exp. in Electrical and Instrumentation products, in PLC, SCADA and ...

Misco Jobs

Resume #87073

CONTACT INFORMATION:
View contact information...

PROFFESSIONAL OBJECTIVE

An Automation Engineer who is keen to work in a culture that requires talent, encourages innovation, promotes growth and where I can prove my technical competence and creative thinking along with my experience as an individual and as a team member.

FIELD EXPERIENCE

* Currently working with FOCAAL AUTOMATION (p) Ltd (System integrator of Rockwell Automation), Chennai. As a Senior Project Engineer (Engaged in industrial automation projects with PLC, SCADA and DCS systems).
From: 18/01/2006 To: till date

* Worked as a customer support engineer in Selectron Process Control (p) ltd. From: 05/09/2004 To: 11/01/2006

* Worked as a Instrumentation supervisor trainee in C S Alloys pvt ltd.
From: 05/02/2003 To: 04/09/2004

FIELD OF INTEREST

* Industrial automation
* PLC, SCADA, DCS

RESPONSIBLITIES

* Control system designing, testing, logic development, HMI programming
* Direct interaction with customer for technical clarifications, getting approval on drawings, Logics, HMI graphics, conducting FAT.
* Preparation of inspection reports, FAT procedures, I/O chart, cause & effect, FDS
* Testing & commissioning at site.

TECHNICAL SKILLS

* Knowledge & exp. in Electrical and Instrumentation products.
* Knowledge & exp. in PLC, SCADA and HMI systems, drives, field instruments.
* Allen Bradley - Micrologix, SLC, ControlLogix, Compact Logix, Flex Logix PLC's
* Panel View and Panel view plus Families
* Knowledge & experience in Controlnet, Devicenet and Ethernet (Netlinx comm)
* RSView32, RSView SE Redundant SCADA Server.
* MS Access, SQL server, VB (Basic) for data logging and view.
* Exp. In GE Fanuc (Versamax, series 30-90), Siemens-(S7 200, 300).

PROJECTS HANDLED

1. Power plant automation – WELSPUN POWER & STEELS LTD, Gujarat

Description: 12Mw CAPTIVE power plant automation (includes 4 waste heat Boilers, 1 FBC boiler and one steam turbine) using Allen-Bradley's Controllogix 5561 Redundant Processor with point I/O's are Connected through control net network. HMI using RS view 32 with 1500 tags.

Also MODBUS serial Communication is used to get the data's from Energy meters, governor, vibration monitoring system and other controllers used in Boilers and power plant to display the status of equipments in SCADA.

2. Control system for FBC Boilers (CVPL)

Description: Single & three element control, Auto Combustion control, temperature control, De-aerator Pressure & level control using PLC & SCADA.

Engineering & Commission:
22 TPH – Glaxo Smithkline
30 TPH – Gwalior Distilleries Ltd.
28.7 TPH – JK Tyres

3. Up-gradation of Air Separation Unit:

Description: Up gradation of the air separation unit using Allen Bradley's Compact Logix controller (controller redundant using Devicenet com).

Customer: BUZWAIR INDUSTRIAL GASES FACTORIES - DOHA, QATAR.

4. Modification in the Fire & gas detection system in buildings and safety operation system in oil storage Tanks.

Customer: ADMA-OPCO, Das Island, Abu Dhabi.

5. AVIATION FUEL FARM AUTOMATION

Description: Scope of project is to automate the fuel farm process, which starts from product receiving from the truck to delivery of the product to the Aircraft bay. System hardware consists of redundant Controllogix L62 processor, RSView SE redundant HMI server with 3 clients, PF400 drives and E3-plus relays. Netlinx (Controlnet, Devicenet & Ethernet) architecture is used to link the field devices in plant-floor to the top-floor system. Motorized valves are controlled thru' MODBUS communication (interface with the PLC using PROSOFT module) from the HMI system.

Customer: RAJIV GANDHI INTERNATIONAL AIRPORT, HYDERABAD.

6. Synchronization, load sharing & Energy monitoring system - ORCHID CHEMICALS P LTD., Chennai

Description: synchronization & load sharing of 3 x 3Mw DG sets and Grid system using PLC-5 processor and LSM module. Monitoring the power consumption of the chemical plant using Enercon make energy meters communicated to a PC (with MODBUS RTU protocol) installed with kepserver and collected the data from kepserver to RS view 32 SCADA Software.

7. Energy Monitoring System – Nokia Siemens Network

Description: Energy monitoring and breaker control system for 2 x 33kv SS
Customer: Sterling & Wilson, User: Nokia Siemens Network

8. Synchronization & Auto load sharing – JTCL, Coimbatore.

Description: synchronization, Auto Load sharing and load shedding of grid supply and Two generators (2.7mw each) using Allen Bradley's - PLC-5/20E processor With Line Synchronization Module. And also SLC-5/05 used to control the HFO Engines.

9. UF and RO plant – AQUA DESIGNS, Chennai.

10. Automatic packing machine – PACKLOCK MACHINES, Kerela.

11. Stacker and Reclaimer – Takraf, Chennai

Description: Engineering & testing of the control system and AC drives with MCC panel for the Stacker & Reclaimer. (End User: ACC, Wadi)

EDUCATION

Diploma in Electrical and Electronics Engineering (1999-2002)
N P A Centenary polytechnic, Kotagiri, the Nilgiris.
MARKS SCORED: 79%

CERTIFICATION

Advanced PLC programming and SCADA - PSG tech,Coimbatore

PERSONAL PROFILES
Date of Birth: 01-05-1984
Sex: male
Marital status: single

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7901 to 7950 of 10884)

Go to Search Parameters...

Brief Description

B Sc. Chemical engineering • Over 3 years experience including in process development

I'm petroleum and Gas Engineer in specilty Development and Exploitation of Oil & Gas fields,taking my degree from Kuban State Technical University Krasnodar Russian Federation in 1999.From this university done 1 year advance course in the same specialty

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

Knowledge Of Autocad, Pro-engineer, Catia, Unigraphics, Ideas

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

More than one and a half year of hands-on experience in Instrumentation and Project and Sales.

Control & Instrumentation Engineer with 5 year Exp in Detailed Engineering

I'm a geophysicist.

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Senior piping designer

Turbine tech.

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

It is my intention to secure a career in the field of Health and Safety on an oil/gas platform. However, since I am new to the industry, I will consider any position.

B. Eng. Petroleum & Gas Engineering University of Port Harcourt, Rivers State, Nigeria.

I can work floors, motors, and derricks.

I have a very strong back and am not affraid of hard work. I am very punctal

Geology, To be graduated.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

chemist, AUC english course, computer course, 2008 graduation

I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

Knowledge & exp. in Electrical and Instrumentation products, in PLC, SCADA and HMI systems, drives, field instruments, Allen Bradley - Micrologix, SLC, ControlLogix, Compact Logix, Flex Logix PLC’s, Panel View Panel view plus Families, in Controlnet, Devicenet, RSView32, RSView SE Redundant

Microcontroller Application, Interfaces Application - PLC (SCADAPACK,OMRON,GE Fanuc, etc), ADAM RTU,EXPERT Module,Flow Compute (OMNI,Sybertrol,AutoExec), Compact PLC (MOXA ioLogik)

Skills: semi skilled fitter & turner, horizontal boring mill, veritcal borer, central lathe, fitter, oilmaker, piefitter, milling machine. I will be finishing my N2 early March to be qualified.

I am very much interested in Oil Gas Exploration.

I've studied chemical Engineering. I passed some curses in drilling fluids, well log, zagros formation studies, and also water treatment

I am a female geologist who is currently doing my masters in geology. I finished from the University of Port harcourt, rivers state In Nigeria. I am a team player and still able to work independently with minimum supervision.

More than three (3) years experience in Mechanical Engineering in offshore/ onshore Oil and Gas Production.Application of Incident and Injury free approach in project, HAZOP study in project.

Chartered Accountant with three years experience in Oil and Gas Industry

I would like to work with a company that is well established and stable.. I enjoy working in the Oil & Gas Industry because of the people I have meet and worked with...I want to learn more about different aspects of the Industry and look forward to moving up with a good company.

8+ years in the field of Cost Analysis (Estimation & Cost Control Function) for Refineries, Petrochemical Complexes, Oil & Gas Pipelines / Terminals and Fertilizer Projects

I work at present servicing a fuel storage depot as a Maintenance Electrician, Leading Hand. I have 6 years experience of this type of work and many specialised qualifications in this area.

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

Mechanical engineer B.Tech. 6 yrs experience.(UAE) exp in dealing with contractors, sub contractors etc , contacts with major oil companies like adco,etc in UAE, excellent knowledge of UAE market .

can apply any job which you think I am fitting for

I am looking for a job in Oil Industry. I'm willing to "Hard work" and work with "Any entry level position" with your concern. I certainly would appreciate it very much if you could give me an opportunity in your company. I am confident of doing a good Job with your concern.

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

Chemical Process Engineer, Aspen Plus, HYSYS, MATLAB, CHEMCAD, Reviewing PFD, P&ID, Design Specifications

I m Final Year Student of Mechanical Engineer and will be pass out upto december 2006. I want utilize my knowledge and skills for an organization, which offers opportunities for personal growth and career development.

Icorr paint inspector/rope access technician

Experice engineer with project engineering and project managemnt

Mechanical Engineer

working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.

To continue employment in the field of oil & gas operations. I will bring dedication, good work ethics, and teamwork to your company.

Hard Working, faster to learn, Capable to working by individually or as a team and Capable to working in any different area

All qualifiations are posted on my resume exept that i have a passport.

First Prev 151 152 153 154 155 156 157 158 [ 159 ] 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out