Resume - ISO/ASNT certified Vibration analyst ,More than three years of engineering exper...

Misco Jobs

Resume #87105

CONTACT INFORMATION:
View contact information...

A talented Mechanical Engineer with experience in Condition based maintenance and Vibration analysis. looking to improve my skills and my experience in an international organization

Summary
******
-ISO/ASNT certified Vibration analyst
-More than three years of engineering experience.
-Analytical skills and self learning ability.
-committed to any work unconditionally.
-Able to work under pressure.
-Able to liaison between technical groups.
-Proven ability to improve efficiency.
-Hard working and detail oriented.

PROFESSIONAL EXPERIENCE
***********************

Arab Swiss Engineering Co. ASEC, Cairo, Egypt June 2007 – Present
Condition Based Maintenance (CBM) Engineer.
"Vibration Analyst" ISO/ASNT Certified

-Collect data and analyze vibration signature using all analysis techniques such as Cross Phase analysis, ODS, Run up and Cost down tests, Bump test, Peakvue …etc. to detect and diagnose any problem before it leads to failure in several cement manufacturing plant such Helwan, NCC, Sinai and Masr Bani Swif plants.
-Using CSI analyzers 2120 and 2130 Pro Consultant and its software "AMS".
-Correct mechanical unbalance problem by applying in-filed balance jobs "multi plan and multi speed" using different balance techniques such as "static-couple balance" and flash angle "one shot balancing".
-Writing monthly technical reports about the machinery health with clear explanations and professional recommendations and supervise applying these recommendations.
-Built up a data base for the equipments and select the equipments which go into the route.
-Built up proper case studies.
-Measuring and diagnosing faults of Bearings, Gearboxes, Electric Motors, Air Blowers, Fans, Air Compressors, centrifugal pumps, piston pumps.

Egyptian Engineering Co., EEC, Cairo, Egypt November 2006 – May 2007
Site/Office Mechanical Engineer

-Mange the operation of building water treatment stations, job involved designing and mechanical drawing skills.
-Designed water treatment units and stations and select the layout of these stations

--------------------------Total years of Experience: 3 years-----------------------------

EDUCATION
*********

Helwan University, Cairo, Egypt
B.S.C in power Mechanical Engineering, 2001- 2006 Grade Good
Graduation project Studying the performance of centrifugal compressor at variable speed.
Grade Excellent

Mobius Institute, Victoria, Australia
Vibration Analyst ISO/ASNT certificate Category II May 2009
Certificate Number 080704

TECHNICAL SKILLS
****************

MS Windows (98, 2000, xp and vista), AutoCAD, Swish, MS Office, Machinery Health Manger "AMS"

LANGUAGES
*********

Arabic Mother tongue
English Very Good "writing, speaking and understanding"

ADVANCED TRAINING
*****************

-Mobius Institute – Natcom –Advanced vibration training III - 2009
-Mobius Institute – Natcom –Intermediate vibration training II - 2009
-SKF - Vibration Analysis and condition monitoring level 2 - 2007
-TCC Technology Competency Center - Operating and maintenance of pumps - 2006
-TCC Technology Competency Center - Hydraulic & Electro hydraulic system - 2006
-Suez Oil Processing Company- Summer training - 2005
-Egypt Air Company – Summer training - 2004

PERSONAL INFORMATION
********************

Date of birth October 21st 1984.
Nationality Egyptian.
Marital Status Single.
Military Service Exempted.

Keywords: Mechanical Engineer, Condition based maintenance engineer, Vibration analyst, Design Engineer
Certificate online reference: http://www.mobiusinstitute.com/mi/CategoryIIStudents.html
Last update: 22nd July 2009

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9101 to 9150 of 10917)

Go to Search Parameters...

Brief Description

BSc Chemistry and Minor Analytical Chemistry , MSc Petroleum Engineering

IT/Business/Analytical professional with experience in the Gas, Safety, and Welding industries as well and inventory planning and forecasting in the auto industry.

Amos RAST Database builder, PMS Engineer, Marine Engineer Liscensed, Support, Maintenance, Planning

Word packaging

10 years experience in oil and gas projects including contract review during bid stage, negotiate terms and conditions of Contract, prepare, negotiate and finalize of sub-contract terms and conditions, contractual correspondence, preparation of change orders, preparation of delay, contract claims.

Civil/Structural/ Architectural Designer with extensive knowledge of petrochemical and oil and gas industry. Expertise in 3d Bentley Structural and knowledgeable in Staad Pro

Develop and Execute marketing strategies/plans by analyzing current business situations in order to meet group's business objectives and also to maintain and increase sales. (Advertising/PR/Events/Promotions/Exhibitions/Market research)

Material Controller/ Expeditor

Mechanical Engineer, technical support

Experienced Property Manager and Landman

Security Officer, Gold mine experience. Security, Explosives and Drug Dog Trainer/Handler

E&I Construction Supt.,Inspector, Commissioning Eng. 30 years plus experience, in various industries, at various supervisory levels.

Oil & Gas Exploration Project Manager - Spring Creek, Nevada resident - Forest Service, BLM , Tribal, State & Federal liason experience

NIOSH certified HSE, worked in oil and gas oon/offshore EPCI projects in Asia/South East Asia regions as Project HSE Manager/ Senior Offshore HSE Advisor/ HSE Coordinator/ Yard Project HSE/ Offshore INstallation HSE/ Offshore Drilling Safety Advisor.

Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Petroleum Engineer, 4 years industry experience in Logging, reservoir and drilling fluids.

Programming VB6, ASP,COBOL,Oracle,MS SQL server,MS Access, Lotus Notes R5,

Sales, Engineering Project Manager

12 Years of experience in the Project Management, Planning, Controlling, Production and Material Management

15 years experience in erection commissioning and maintenace of field instrumentation , DCS, PLC, SCADA ,VFD, LT PANELS , in petrochemical, steel, pharma,copper plants

I am Mechanical engineering graduate with 18 years of experience with the Project Management & execution, Procurement & Contract Management. Executed Tendering, Commercial Evaluation, Negotiation, and Contract Administration for mega projects in Hydrocarbon and Oil & Gas sector. Involved in Concept

CV for AutoCAD Operator, Document Controller & Technical Assistant

Mining and geological engineer from the university of Liege with a specialization in geophysical methods and geotechnics.

Project Manager, Field Engineer, Commissioning Electrical Switchgear

ISO/ASNT certified Vibration analyst ,More than three years of engineering experience ,Analytical skills and self learning ability,committed to any work unconditionally,Able to work under pressure,Able to liaison between technical groups ,Proven ability to improve efficiency

I have 3 years experience in the Design industry. I self taught myself on AutoCad and Microstation.

Ellipse Business Analysis Skills in the Area of Asset Management, Work Management, Purchasing, Warehouse, Catalogue, and others.

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Have been a rigger/ironworker for 10 years+. Have experience in welding and have done this on/off for 8 years.

Mechanical Engineer having 8 years experience in Petrochemical, Oil&Gas sector as Project Planning Engineer, looking for suitable position with family staus

I have more than 5 year of experience under valve manufacturing company.I worked with gate, globe, ball, NRV valves mostly with forged steel, cast steel, and stainless steel. But I have a experience of manual valve only.

Total eleven years of experience in Refineries/Petrochemicals, Chemical & Oil Port Terminal, Offshore Platform projects etc. Presently working with Foster Wheeler, Singapore and Previously worked for prestigious organizations like, Technip-France, Snamprogetti SpA-Italy, Indian Oiltanking, Indo Gulf

Experience in Instruments of PERKIN ELMER and applied bio-system, installation, commissioning, maintenance, and calibration of various instruments;

Electrical Engineer with wireless, optical and integration expertise

Electrical Engineer with previous hands-on experience in electrical and mechanical equipment maintenance

Applying for the post of safety officer in your esteemed concern

I am I.T.I Diesel mechanic with some knowledge of computer. Want to join industry as a trainee for good future

Purchaing, Procurment, Supply Chain Management, Materails, Inventory

Over 20 Years Industrial, I&E Commissioning Field Service Engineer /Electrical Start-up Engineer

I have worked as a chef in extreme conditions in the past. nothing i can't handle big or small jobs.

Mechanical/Manufacturing Engineering, Project/Program Management, Supply Chain Management

I am Tank and piping/pipeline / structure Superintendant

A Buyer /Expeditor with 18 years Gulf experience

Welding Engineer, ASME,AWS D1.1, Welding Inspection, Welding supervision

PhD (Geology), Post MSc Diploma (Hydrogeology), MSc (Applied Geology). Working as GIS Professional and previously worked as Geologist, Lecturer in Environmental Science and GIS Professional.

Internationally Experienced Document Controller.

Skilled in Ms word, excel, power point. I have an SSCE/WAEC from Dom Domingos college Warri, an OND in Mineral Resources Engineering, Federal Polytechnic Ado Ekiti, Ekiti State, Nigeria and HND Pet. Engineering, Petroleum Training Institute Effurun, Delta State Nigeria. With maintenace culture.

I have 2 1/2 years experience in the pumping industry working as an acid and cement pumper operator and 4 1/2 years experience as an acid and cement supervisor. I am knowledgeable in acidizing primary and remedial cementing. I am looking forward to furthering my career internationally.

Working as Technical Instrument Custodian offshore North Sea for Shell. Previously worked as Specialist Systems Engineer for Honeywell for 4 years.

Paralegal

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 [ 183 ] 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out