Resume - Oil and gas production, well testing, gas lift wells performance, Gas lifting op...

Misco Jobs

Resume #87198

CONTACT INFORMATION:
View contact information...

OBJECTIVE

To obtain a challenging position in the Oil & Gas field as Production Supervisor that will fully utilize my talents and technical skills and help me reach higher echelons.

CORE COMPETENCIES

„Ï Process engineering
„Ï Normal Operation and Production
„Ï Gas lift Optimization and Automation
„Ï Reservoir Depletion Study
„Ï Effective EOR Study
„Ï GOR Calculation
„Ï Well Management
„Ï Handling Revamping Jobs
„Ï Chemical Injection Implement Study
„Ï Well Testing and well shutdown plan preparation
„Ï Optimizing the Plants and Equipments
„Ï Trouble Shooting
„Ï Dynamic /strategic Planning
„Ï Production Calculation

TRAININGS AND CERTIFICATIONS
„Ï Diploma in Petroleum Exploration
„Ï Diploma in Industrial Safety
„Ï Distribution Control System and Plant Automation
„Ï Process Control System and implementation.
EDUCATION

B.TECH with specialization in Chemical Engineering from Bharathidhasan University in 2001
MBA with specialization in Operations from Madurai Kamaraj University 2008.

SYNOPSIS
Young, energetic and result oriented professional with 9 years of comprehensive experience in Oil and Gas Field (Both onshore and Offshore) as Production Supervisor; Deep understanding of technology with focus on delivering business solutions; Self motivated, hardworking, dedicated with ability to understand and meet the time lines; Highly ambitious and very good understanding of the organizational needs: Extended expertise in oil and gas production platform operation, onshore production station operation and control, Oil and Gas projects.
CAREER HIGHLIGHTS

„Ï Successfully completed QG £L£L offshore platform Commissioning and Test Run.
„Ï Coordinated Nitrogen Helium Leak testing, filling volume calculation and executing the testing.
„Ï Successfully Completed MAERSK oil Qatar onshore jobs for 3 process platforms, ready for sail out
„Ï Involved in the HAZOP review for all three platform
„Ï Involved in implementation of new online Water injection skid and skid automation, in PDO
„Ï Study and implementation of Chemical Injection to improve the production
„Ï Study and improve the well production and minimize the oil loss
„Ï Study and improve the efficiency of Dehydration unit and minimize the glycol loss.
„Ï Study and improve the Gas sweetening unit efficiency.
„Ï Well testing and reservoir depletion study and well management.
„Ï Production calculation and report to the Production coordinator.
„Ï Trouble shooting the unit to meet the production and product specification.
„Ï Gas lifts optimization and automation.
„Ï Equipment analysis and improve the capacity to reach the maximum production.
„Ï Conducting yearly shutdowns to improve the equipment efficiency.
„Ï Revamping the unit and commissioning.

AREA OF SPECIALIZATION
Oil and gas production, well testing, gas lift wells performance, Gas lifting optimization and automation, Gas sweetening efficiency, improve chemical injection to better water separation and minimize the consumables, giving training of local operators and engineers. Operation and production technology, Monitor well performance and sharing with production operation for solving any problem, preparing work program budget(WPB) for short term production forecast(STPFC) and long term production forecast (LTPFC),Lead /participate in multi discipline terms and provide technical advise and guidelines, troubleshooting production operation and wells integrity, work in team to successfully implement production enhancing projects and initiatives, follow up the well test and well operation, gathering stations activities etc where appropriate, analyze and interpret a verity of well monitoring survey and gas lift survey, preparing troubleshooting programs for artificial lift wells such as ESP and gas lift, water injection and gas injection, monitoring of field production and injection data for evaluation of its performance.

PROFESSIONAL EXPERIENCE

NATIONAL PETROLEUM CONSTRUCTION COMPANY, Abu Dhabi (July 08 - Present)
Lead Process Engineer (Commissioning & Start up)
(Reporting to Commissioning Manager)
Working as Lead Process Engineer (Technical, onshore and offshore commissioning and start up) for on going project MAERSK OIL Al Shaheen Field Development project Qatar.

Key Deliverables:

„Ï Preparation and review of operational test procedure (OTP).
„Ï Preparation and reviewing of Operational control narrative for the Process platform.
„Ï Hazop review and logic implementation according to the MOQ requirement.
„Ï Preparation and executing the onshore testing.
„Ï Preparation of project hand over documents.
„Ï Preparation of individual system sub system operating manual and plant start up.
„Ï Preparation on Initial plant start up safety check list (PSSR).
„Ï Preparation and executing nitrogen/helium leak testing.
„Ï Nitrogen/Helium filling volume calculation and test pack preparation.
„Ï Executing Onshore / Offshore commissioning job.
„Ï Preparation of Test run and performance test documents
„Ï Executing the performance test and test run at offshore.
„Ï Giving training to the company employees based on the project.
„Ï Giving operational training to the UAE Nationals.
„Ï Giving training to the operators before start up.
„Ï Handling Sr. engineers and engineers when the time of onshore and offshore commissioning.

PETROLEUM DEVELOPMENT OF OMAN (Nov¡¦ 06 - Jun¡¦ 08)
Production Supervisor, Yibal North Oman.
(Reporting to Production Coordinator)
I have been worked as a production Supervisor in Petroleum development of Oman, handled various type of oil wells like gas lifting wells, ESP wells, Beam pump wells, water injection wells in a onshore facility producing 12000 BBLS of oil per day with Enhanced oil production, handled six gathering stations and one pumping station.

I have supervised 6 Oil gathering stations operation & control, Production operators and 1 oil pumping station operation, CCR and individual station control room operators. Include gas injection facility, water injection facility, gas dehydration unit, gas sweetening unit, Fuel gas plant, gas lifting, ESP pumps, Daily production calculation and reporting to the cost (Muscat), planning for the integrity jobs and maintenance jobs, trouble shooting in the turbines and compressors, maintain the HSE and safety in all gathering stations. Handled new projects like Yibal KUFF plant revamping and operation, ALHUWAISHA condensate recovery plants study and execution of the project, new water injection skid implementation project (SGS) study about the logic review and implementation, commissioning and start up for the new plant and projects.
Key Deliverables:
„Ï All station operation and control
„Ï Daily production calculation and reporting to the production coordinator and Muscat.
„Ï Preparation of individual equipment history for future data.
„Ï Handling and technically solving the turbine trips to minimize the production.
„Ï Failure analysis to improve the operation and minimize the production loss.
„Ï Well testing and individual well characteristic analysis to analyze the production loss.
„Ï Trouble shooting of individual equipments to maximize the production.
„Ï Study about TEG dehydration unit to minimize the Glycol loss
„Ï Reservoir depletion study based on the well testing.
„Ï Handling the wells to workover like CTU, well survey and perforation jobs.
„Ï Handling the plant under critical situation like power failure and utility failure.
„Ï Successfully completed online water separation and injection project in Yibal field, Oman.
„Ï Study to improve compressor performance to minimizing the trips.
„Ï Study of Separator gas/liquid handling capacity to improve the production
„Ï Calculation for predicted production based on well testing.
„Ï Giving training to the trainee operators and contractors
„Ï Giving individual equipment operation training to the operators and maintenance team.
„Ï Consumables yearly budget preparation.
„Ï 90 days work planning, 30 days work planning and 2 week work planning, current job planning.
„Ï Conducting safety audit and implementing the STOP card actions.
DCS EXPERIENCE
„Ï Experience on Siemens DCS system
„Ï Experience on Field bus control system on Windows NT server based Emerson Process Management (EMERSON-DCS DELTA V),
„Ï Experience in DCS on Honeywell TDC 3000
„Ï Experience on SCADA (IFix, TEXT inc)
„Ï Experience on FOXBORO I/A series 9.1 with Tryconix
„Ï Experience on PLC (Allen Bradly)
„Ï Operating, monitoring and controlling of process plant parameter through DCS and observe any abnormalities, malfunction and take immediate measure to rectify the problem
„Ï Safe star ups and shut downs of the plant and stabilizing the plant during emergencies and trouble shooting.
„Ï Updating of all control room and field reading, preparing daily production report and reporting production supervisor
„Ï Monitoring plant Fire and gas equipment through F/G panel (HIMA)
„Ï Monitoring and controlling of Gas Lift, ESP, Water Injection and Disposal Well through Fieldware Services System.
GAS TURBINE HANDLED
„Ï experience in Gas Turbine engine Rolls Royce AVON engine, GEC Power Turbine, Solar Turbine (Centaur 40) and Ruston Gas Turbine (TB 5000)
„Ï Experience in Centrifugal compressor of Dresser Clark, Elliot, Pognone Solar compressor
„Ï Operation of Honeywell FSC control system, HIMA control system, Turbotronic control system, Petrotech control system,.
„Ï Star up and trouble shooting Gas turbine and compressor, hand over turbine and compressor maintenance
„Ï Commissioning of gas turbine and centrifugal compressor

QATAR PETROLEUM DEVELOPMENT CO. LTD, JAPAN, QATAR OFFSHORE (Mar¡¦ 05 - Nov¡¦ 06)
Production Supervisor, QPD Japan, Offshore.
(Reporting to Production Manager)
Qatar petroleum development offshore process platform worked as a capacity of Production Supervisor for Commissioning and Initial startup and stabilization of the plant.
QPD is an Complex its having Crude oil stabilization unit, Gas Dehydration unit (Tri Ethylene Glycol- TEG), Oil Dehydration (Electrostatic Oil Theater), Gas injection unit Glycol Regeneration Unit, Gas Sweetening Unit (MDEA), Amine Regeneration Unit, Process Gas Compression Unit (Solar Gas Turbine), Crude oil Pumping Unit, Crude oil Metering and Export Facilities, SCADA Controlling system (TEST Ins.), Produce Water Treatment, water injection facility and Gas injection facility,
Key Deliverables:
„Ï Responsibility of are authority commissioning and startup and development of process system
„Ï Preparation of risk assessment of activity needed
„Ï Coordination /monitoring and reporting the plant activity
„Ï Failure analysis when the time of initial start up and plant stabilization.
„Ï Gas compressor initial start up and stabilization of gas injection.
„Ï Prepare the production platform for performance and execute the performance test
„Ï Prepare the production platform for Test Run and execute the Test Run.
„Ï Trouble shooting of dehydration and gas sweetening to maintain the specification.
„Ï Make recommendation to improve the effectiveness of all equipments and total plat operation
„Ï To analyze operation problems, develop solutions and follow up for implementation of corrective action
„Ï Trouble shooting of individual equipments to maximize the production.
„Ï Study about TEG dehydration unit to minimize the Glycol loss
„Ï Well testing to prove the performance of test separator.
„Ï Well maximize production to prove the line capacity and production separator handling capacity.
„Ï Preparation of daily and monthly operating report, utility report and chemical consumption report
„Ï Finding the DCS problems and solve it.
„Ï Perform the control logic test to prove the production platform control.
„Ï To conduct test run /plant evaluation to determine process efficiency
„Ï To conduct economic study for optimization of production rate and cost
„Ï To prepare study proposal/project proposal and prepare performance specifications, coordinate and follow up until the commissioning complete.
„Ï Giving training to the trainee operators and contractors
„Ï Giving individual equipment operation training to the operators and maintenance team.
„Ï Giving shutdown training before yearly shutdown.
DCS EXPERIENCE
„Ï Experience on Siemens DCS system
„Ï Experience on Field bus control system on Windows NT server based Emerson Process Management (EMERSON-DCS DELTA V),

INDIAN OFFSHORE EXPERIENCE IN MUMBAI BASIN OFFSHORE PRODUCTION PLATFORM WITH BRITISH GAS EXPLORATION AND PRODUCTION INDIA LIMITED, MUMBAI HIGH OFFSHORE (Jan¡¦ 01 - Mar¡¦ 05)
Joint as a Graduate Engineering Trainee then promoted to Assistant Production Supervisor, India
(Reporting to Offshore Installation Manager)
Joint as a GET (Graduate Engineering Trainee) promoted as a Production Supervisor looking production / Wellhead Operations in British Gas Exploration and Production India Limited (BGEPIL) at Panna Production Process Complex and unmanned Satellite Wellhead platform in Mumbai Basin offshore. Handling total 63 oil wells (Self Flowing Well + Gas Lift Well ) in a Offshore facility producing 38,000 BBLS per day. Handling 7 Satellite unmanned wellhead platforms and one Main Offshore Production Process Complex
Key Deliverables:
„Ï Operation and controlling of separator (Two and Three Phase), Tube and shell type heat exchanger, monitoring and adjust separator level for give good oil and water separation. water cut sampling.
„Ï Experience in Oil Dehydration using Electrostatic oil Treater, Dry oil heat exchanger (Plate Type) and Dry oil Tank
„Ï Equipment handling separator, Heater, Slug Catcher, Glycol Contactor, Amine Contactor, Re-boiler, Flash Drum, Scrubber, Filter separator, inter stage cooler, Shipping pumps.
„Ï Well experience in start ups and shutdown and process Trouble shooting of Gas Dehydration unit, Glycol Regeneration unit (Tri Ethylene Glycol- TEG) capacity unit: 180 MMSCFD and Gas Sweetening unit and Amine Regeneration unit (Methyl Di ethanol amine -MDEA) Capacity of unit: 25 MMSCFD
„Ï Experience on Fuel Gas Treatment plant. Start up and shut up operations
„Ï Experience on Produce water treatment, operating of Water Skimmer, Hydro cyclone, backwash of hydro cyclone, maintain the oil content in disposal water to sea below 40ppm. Handling of water 55000 bbls/day
„Ï Operation of Export crude oil pumps and monitoring of flow, pressure and BS&W in export line
„Ï Familiar of F&G panel, Fusible plug, Sprinkler System, Fire water pump, override for calibration of Detector like H2S, Gas detector, Smoke Detector and heat detector in Det-tronicis Panel.
„Ï Co-ordinate with offshore supply vessel, location and unloading of material.
„Ï Co-ordinate with offshore wellhead team, maintenance, instrument and electrical team
„Ï Checks all production operations parameters, flow rates, pressures temperature and read adjusting and tuning as required detect abnormalities and assist in remedial actions.
„Ï Monitors all plants operation conditions through displays, graphic and trend logs
„Ï Monitors control panels or on site instruments in accordance with standard plant operating procedures and instructions, thus ensuring a continuous check on the efficient running of the plant and equipment in his assigned area.
„Ï Control chemical consumption by proper application of dosing rate and maintain adequate inventories onsite.
„Ï Ensures proper/safe housekeeping after completion of any maintenance job keeping work area clean, tidy and safe to work.
GAS TURBINE COMPRESSOR EXPERIENCE
Start up and shut up of Centrifugal compressor driven by Gas Turbine Engine. Well experience on Solar Turbine Mars 100 Engine and Solar Gas Compressor, Allen Bradley PLC, operating by Turbotronic Control System. Compressor capacity 90 MMSCFD. Commissioning of compressor, Start up trouble shooting and hand over to maintenance, monitoring compressor parameter, maintaining of compressor daily log book

OFFSHORE HSE
„Ï Good familiar on offshore HSE and all type offshore safety equipment.
„Ï Weekly conduction Mock Drill participating as a Emergency Responsible member(ERT)
„Ï Raising safety suggesting, Conducting tool box talk before job start,
WELL / FIRE / ESD SHUTDOWN PANEL OPERATION
Unmanned wellhead platform shutdown normalizing through AUTO CON, BRISCO, OTIS, RUELCO panel board. Opening and closing of SCSSC and SSV from hydraulic cum pneumatic panel board. Handling of pneumatic KASKAL pump (Start up and Primary), Handling of all shut down activity like ESD,FSD and PSD

SAFETY TRAINING COURSES
„Ï Personal Survival Techniques - Gulf technical & safety Training Center LLC, Abu Dhabi.
„Ï Helicopter Underwater Escape Training (HUET) -Gulf Technical & Safety Training Center LLC, Abu Dhabi.
„Ï H2S Awareness & Escape - National Training Institutes Co LLC - Oman & NPCC Abu Dhabi.
„Ï Basic Gas Testing- National Training Institutes Co LLC - Oman & NPCC, Abu Dhabi.
„Ï Basic Life Support and First Aid-National Training Institutes Co LLC - Oman & NPCC, Abu Dhabi.
„Ï Initial Fire Response and Fire Fighting- National Training Institutes Co LLC - Oman& NPCC, Abu Dhabi

PERSONAL DETAILS
Date of Birth: 14th June, 1980
Languages Known: English, Tamil and Malayalam

References: Available on request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 10917)

Go to Search Parameters...

Brief Description

Looking for and Field Operating Position / Production Coordinator, Can also Well Service

Repair, maintenance and troubleshooting onshore and offshore units (ONCC, OLU), Generators, Compressors (WAC-SS22, WAC-QB), Hydraulic units (EHPS, DAPS, OSU,OSLC), HVAC. Hook – up, setup and installation offshore & onshore equipments Corresponding with Customers and Suppliers I have

I am someone who is highly motivated and organized. I have over 20 years in the construction industry, including work in Western Canada and time in Angola as a Construction manager, where my duties were tto evaluate and implement new processes to achieve cost certainties in an exploration environmen

I have extensive supervision and management experience (including QA/QC) on contracts valued from £30 million to £3 billion in the fields of Oil & Gas related work, military airfields, Power plant construction, water provision and dam construction in the Middle East, Africa and the Caribbean.

Reservoir or Production Engineer

Social Responsibility Specialist

Mechanical Engineer, with +30 yrs experience in Quality Assurance Management and Engineering Management, executed more than 10 projects in Fertilizer, Refinery and Petrochemical industry

Petroleum engineer with 20+ years of diverse experience. 4 years of multi cultural supervisory experience in North Africa. References available on request.

Process design for some of the largest Oil and Gas production systems (offshore/onshore) and pipelines (including Jamnagar Loni LPG) in India have been done directly by me in Engineers India (EIL) or withands on supervision (complete Process Design responsibility from concept to comm. of project).

I am writing to your goodselves wishing a reply to my present request. I would like to apply for the post of Production Operator or any other Board man . I enclose my resume with the name of referees.

Piping Designer

Petroleum Engineer with various and quantifiable exposure in production and reservoir engineering roles. Been involved in both onshore and offshore work environment, mature and new field development, heavy/light oil and gas wells.

Power plant project, O&M professional

Have surveyor, title abstractor, draftsman, networking and landman experience.

Static equipment like vessel, tank and heat exchanger

BS Ceramic and Cement Technology, my experience is working in the field of Refractories and insulation, i have about 12 years field experience.

12 plus years experience in the operation of various Hydrocarbon processing units located offshore (production platforms, and FPSO) and EPC company. My current position is that of Snr. Production Operations Lead with Sunlink Petroleum

corrosion and cathodic protection

Electrical Engineer with sea /offshore experience, familiar with automation, DP courses,PLC control,

Planning, executing & managing large projects involving implementation of Information & Communication Technology systems.

For the past 8 years, I have been working with Abu Dhabi Gas Liquefaction Co Ltd (ADGAS). I am well versed in all the LNG Sales Contracts like Heads of Agreement, Term Sheet, Gas Sales Purchase Agreement, Confidentiality Agreements, Sales and Purchase Agreement for both FOB and Ex-Ship sales.

Ph.D in Safety Engineering, looking simililar job either consultant, or mining, mechanical engineer or any safety related job

18 years experience the Business, Commercial and Supply Chain Strategy and New Business Development for a large range of organisations and business types. Experience in oil & gas and manufacturing (Head of Business Services Brunei Shell).

See resume body

Planning / Scheduling, Project engineering, Subcontracts administration, Primavera, Open Plan,MS Office,Pipeline design/construction/replacement

Objective: I would like to pursue a challenging position in the oil and gas industry working as a development geologist developing oil and gas fields along the Texas Gulf Coast.

Maint Planning, Materials management, warehouse, plant maint, turnaround, project

I am a Mechanical Engineer from Madras University in the year 1981. I have over 18 years of Offshore oil fields experience in production Operations of oil & gas and water injection.

Ph.D in Geophysics, over 12 years industry experience in offshore and onshore seismic 2D/3D data analysis, processing and interpretation

Reservoir/Geoscience Technician

Completion/Workover Supervisor

Oil and gas production, well testing, gas lift wells performance, Gas lifting optimization and automation, Gas sweetening efficiency, improve chemical injection to better water separation and minimize the consumables, giving training of local operators and engineers. Operation and production techno

I am a Chemical Engineer having 10 yrs of valuable experience in various areas of petroleum refining including unit operation, Revamp jobs, Process engineering, Process Modification, PFD/P&ID review, HAZOP study, Safety review, troubleshooting, Advance Process Control, Simulation Studies

Project Controls/Cost Engineering/Analyst

Mechanical Supervisor/technician

Mechanical Commissioning/Start-Up &Generation advisor engineer

Piping supervisor/ Project Manager

An Electrical Engineer having 10+ years of experience in Petroleum & Petrochemical Plants

10 yrs in fuels, postions held operator, supervisor, special projects, op's manager in USA, Iraq & Afghanistan

Experienced in land operations on small and large rigs. Team player. Works well in simultaneous operations to maximize results for the client. Speaks Spanish as well as mother language of English.

I have spent almost of my ten years experience in Petroleum Company that will give me deep knowledge to support my ability. My educational and computer literation background as described below will also support me to do my work.

DCS, PLC, Automation Specialist

A competent Fire Expert, with an extensive Fire & Safety background, and knowledge in corporate guidelines. A proven professional and Technical Communicator with expertise in Loss Prevention, Safety & Fire Protection support, safe work practices, fire systems and design reviews. He has been accounta

Free! Senior marine officer with extensive experience in the offshore oil & gas industry,Currently shorebased marine regional manager

Instrumentation ICSS commissioning specialist

I am a career driven individual with desire and ambition to succeed, grow and develop with a dynamic and professional company like yours, one that can afford good prospects coupled with challenge for professional achievement and satisfaction.

Sr. Designer with Autocad,Microstation, PDMS,AutoPlant, SmartPlant

DCS Operator with more than 15 years Experience

14 years in Details engineering, Control system, Construction, Operation and Maintenance works of Electrical and Instrumentation in EPC projects Oil & Gas, Hydrocarbon, Petrochemical, Refineries

Sr. Java developer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out