Resume - I am a Mechanical Engineer with work experience basically in Oil & Gas and Refin...

Misco Jobs

Resume #87284

CONTACT INFORMATION:
View contact information...

Mr. Alberto Trujillo is a Mechanical Engineer with a Master Degree in Mechanical Engineering and 32 years of professional experience, mainly in the Venezuelan Oil & Gas Industry. Work responsibilities in the areas of Refining and Production have included Rotating Equipment Engineer; Operational Projects Engineering, Procurement and Construction Coordination Engineer; Effluent Treatment and Utilities Projects Lead; Mechanical Engineering Lead; Gas Compression Complex Maintenance Manager; Process Safety Manager; Orinoco Belt Extra Heavy Oil Project Engineering Manager; Engineering and Projects Technical Support Manager; and Corporate SHE Manager for the Engineering and Projects Division. Mr. Trujillo's most recent experience has been in the International Projects Management area, designated as Project Manager for a Catalytic Naphtha Hydrotreater Unit, and as Resident Project Manager for two Ultra Low Sulfur Diesel Hydrotreater Units. His management style is basically results-oriented and team-work-focused, with the ability to work under pressure and provide adequate direction to his collaborates in the integral development of industrial infrastructure projects. Mr. Trujillo has dual citizenship from Venezuela and the United States of America, and is fluent in both Spanish and English. He is also founding associate and Director of the Venezuelan consulting company HTF & Asociados, C.A.

EDUCATION
1991, Executive Development Program, University of Houston, Texas, United States
1978, M.Sc., Mechanical Engineering, University of Aston, Birmingham, United Kingdom
1976, B.Sc., Mechanical Engineering, "Simón Bolívar" University, Caracas, Venezuela

EXPERIENCE
Since 2003 Founding Associate and Director of the Company HTF & Asociados, C.A.
Responsibility in the direction and execution of Engineering Consulting activities in the area of industrial projects development.

HTF & Asociados, C.A.

04/2007 – 05/2009 Resident Project Manager for two Ultra Low Sulfur Diesel Hydrotreater Units, CITGO Lemont and Corpus Christi Refineries, USA
Resident Project Manager in representation of CITGO, to oversee the development of the Detail Engineering performed at the Inelectra Offices in Caracas for two commonly designed Ultra Low Sulfur Diesel Hydrotreater Units, for construction one at the Lemont Refinery and the other one at the Corpus Christi Refinery. The design of these Units was performed with support from Mustang Engineering in Houston acting as Technical Lead, to comply with EPA Regulations of maximum allowable sulfur content in road diesel of 15 ppm by 2010. The Engineering Contract dimension was $18 MM and 295,000 man-hours.

11/2004 – 10/2005 Project Manager for a Catalytic Naphtha Hydrotreater Unit, CITGO Corpus Christi Refinery, Texas, USA
Project Manager responsible for the development of the Detail Engineering and Procurement support, for construction of a Catalytic Naphtha Hydrotreater Unit at the CITGO Corpus Christi Refinery, performed at TIVENCA Maracaibo with support from Jacobs Engineering in Houston, designed to comply with EPA Regulations with respect to the maximum allowable sulfur content in gasoline of 30 ppm. Responsible for the administration of an Engineering Contract of $7.5 MM and 165,000 man-hours, and a procurement effort of $20 MM.

Petróleos de Venezuela, S.A. (PDVSA)

10/2002 – 12/2002 Corporate Safety, Health and Environment (SHE) Manager, Engineering and Projects Division
Development and management of the Integral Risk System for the Engineering and Projects Division, based on PDVSA SHE corporate policy and procedures, applicable to projects during the engineering, procurement and construction phases.

01/2000 – 09/2002 Technical Support Manager, Engineering and Projects West Region
Management of activities related with technical assistance and quality assurance of Crude Production projects during the Engineering, Procurement and Construction phases, utilizing applicable Recommended Practices to identify opportunities to optimize designs and potential benefits.

06/1995 – 12/1999 Engineering Manager, VEHOP (Venezuela Extra Heavy Oil Project) Upstream Facilities, PDVSA-CONOCO Joint Venture (PETROZUATA)
Management of the Engineering, Procurement and the Construction Plan for the production facilities (Main Station and Clusters), to produce 120,000 BPD of 9.3 API bitumen. Responsible for leading a PDVSA-CONOCO Project Team and executing a $25MM and 500,000 man-hours engineering contract, and a $120MM procurement effort.

07/1994 – 05/1995 Process Safety Manager, Production Division
Development of the plan to implement Process Safety Management in the Production Division. A baseline audit was performed based on API RP to establish a benchmark. Continuous work relationship with the SHE organization and production operations was required to implement findings and recommendations.

03/1993 – 06/1994 Compression Plants Maintenance Manager, Production Division
Responsible for planning and execution of the predictive and preventive maintenance programs of 10 gas compression plants (900 million SCFPD) located in Lake Maracaibo, required to achieve the equipment reliability needed to meet the target production, including budgeting of overhauls and routine maintenance, planning of required spare parts and troubleshooting activities.

01/1991 – 02/1993 Mechanical Engineering Lead, Production Division
Oversight and guidance of mechanical engineering activities related to project execution, including basic and detail engineering, procurement and construction support for both onshore and offshore Oil and Gas Production facilities and utilities. The average budget handled was $80MM per year.

03/1987 – 12/1990 Effluent Treatment and Utilities Projects Lead, Production Division
Project Lead for effluent treatment facilities and utilities, including basic and detail engineering, procurement and construction support. Responsible for planning and execution of a Master Plan designed to treat and dispose of over 500,000 BPD of produced water in a period of 5 years, according to government regulations (MARNR). The average budget handled was $30MM per year.

04/1984 – 02/1987 Project Coordination Engineer, Production Division
Management of project interfaces between the engineering group and operations or any other clients, including the execution of project support activities related with planning, budget approval, procurement, contracting, permitting, and hook-up and commissioning. The average budget handled was $10MM per year.

08/1981 – 03/1984 Operational Projects Engineer, Refining Division
Lead Mechanical Engineer on rotating equipment related projects, including a flare gas recovery system and the replacement of the compressors in the CCU Unit. The average budget handled was $6MM per year.

02/1979 – 07/1981 Rotating Equipment Engineer, Refining Division
Development of specifications and data sheets for replacement of rotating equipment; execution of a mechanical seals installation program on process pumps; troubleshooting of rotating equipment; on-site balancing of power generators.

COMPUTER APPLICATIONS
Knowledge of Microsoft Office (Word, Excel, PowerPoint) and Internet applications.

PROFESSIONAL ASSOCIATIONS
Association of Venezuelan Engineers, 1976 – Present, Registration No. 17047

LANGUAGES
Spanish, English

WORK EXPERIENCE (COUNTRY)
United States, Venezuela

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 10924)

Go to Search Parameters...

Brief Description

Thorough knowledge in Primavera, MS Project, MS Office & EVMS

25 years experience in LNG/Refinery plant/panel operations/commissioning

I have done PG in Chemistry with post Graduate in industrial safety from India and also completed NEBOSH - General Certificate from UK

Senior Rotating Engineer

A Process Engineer with a Masters Degree in Chemical Engineering from the University of Waterloo, ON, Canada and 10+ years experience in natural gas and polymer processing industries. Specialize in process optimization, manufacturing and troubleshooting.

I have over 16 years of working experience as a QC Inspector in petroleum and petrochemical construction Industry. I have knowledge and experience as Q/C inspector in various inspection activity like raw material inspection, welding procedure / welder performance qualification,various methods of NDT

HSE Coordinator / Offshore Safety Officer

I've developed leadership qualities and a proactive attitude, all of these combined with my experience in Maintenance and Well Production Operations, supported with software and techniques on Equipment condition analysis, laser alignment, corrosion testing, boroscopic inspection and vibration analys

Mechanical engineer in Oil&Gas Feild 18 yrs Experience in Installation, maintenance, QC in Static, Rotating equipments.

Able to learn Work Process and new software with ease. Experienced in the refinery of Blueprints, Isometrics, and P&ID¡¦s, Hand Skecthes. Experienced in structural steel supports and familiar in estimating material take-offs. Trouble shooting installation of pipe and assist Engineers in the field.

PhD Petroleum Engineer (Production Technologist)

I have 15 years Lab experience such as 6 years of LNG plants, 7 years of Refineries and 3 years of Aromatic and PTA plant Labs experience with 5 new labs commissioned experience. I have a good knowledge regarding the dosing of corrosion inhibitor at wells side. I can conduct Oil & Gas analysis.

I have a strong ability to communicate and work effectively with co-workers and management. I am Self motivated, detail and goal oriented person. I am experienced in working with little to no supervision. I posses effective skills in communicating orally and in writing

Talent Management, Talent Acquisition, Talent Development, Change Management and Lean

M tech stctural engineer in Civil department, i am having expeerience in oil and gas as sr engineer in civil and structural department.

I am familiar with almost all of Pennsylvania. I currently have over 30,000 acres available to me for lease, most of it has been identified as being in the marcellas shale regions. this acreage also holds shallow oil and gas reserves. A substantial amount has current production which is available

Senior Piping Designer

Heavy equipment operator

Mechanical Fitter (Foreman) Maintenance Department. - 25 years experience

39 years experience running both surface & mineral titles & preparing reports

Assistant Driller - Main activities and responsibilities on the rig DRILLMEC HH - 220

I have been responsible for all aspects of mineral and royalty acquisitions that there are. I am also an experienced permit agent and familiar with most aspects of two and three-d seismic permitting. Negotiated damage settlements.

I am a motivated individual with a high degree of HSE knowledge and operations integrity & commitment, I have operations & maintenance experience working in the oil, gas & chemical industry (without an OSHA recordable incident)

Versed in plant operations and turnaround codination. Seeking short term contract assignment.

Project Engineer & System engineer along with detail design experience and product development expertise gained from 20+ years working for NASA.

I am a Mechanical Engineer with work experience basically in Oil & Gas and Refining Project Management, Gas Compression Plant Maintenance, and Process Safety Management. Currently I live in Venezuela and planning to relocate to the United States. I have dual citizenship and fluent in both languages.

25 years of professional experience in the Front-end and Detailed Design and Engineering, Projects Engineering, PMC, Factory & Site Acceptance Testing, Supervision of Installation, Testing and Commissioning of state-of-art DCS, SCADA, Safety Shutdown and F&G Systems and field instrumentation

TQM facilitator & instructor /Lead teams to resolve to improve process/ 4 yrs offshore Maintenance Supervisor /2yrs manager offshores field/ 4yrs CMSM coordinator/6 yrs contol management stocks

Field Acquisition QC. Over 20 Years experience in Land Seismic. 3D Design by OMNI and MESA. Field processing of 2D/3D land seismic data (MicroMax,ProMax, VISTA, APEX) . Creating and verification of SPS files. Static correction.

Working as In charge OIL/GAS LABORATORY TESTING OF LPG/C2C3/NAPHTHA/OIL ETC. PROCUREMENT/CALIBRATION/MAINTENANCE OF EQUIPMENTS

OBJECTIVE: Add value by leading people and projects, solving problems, bringing order from chaos, turning dysfunction into productivity, in a petroleum exploration or development geology management position.

Contracts Int. Experience in Construction, Management and Administration (EPC), Materials Manager (PMC), Materials Control, Procurement & Expeditor; Fluent in English, conversational in French, Russian. Seeking to continue professional career effectively utilizing my skills and gained experience.

More than(18) years in piping design & construction. Specialize in stress analysis of piping system using Caesar 11. Worked in oil refineries, onshore & offshore, gas plant & petrochemicals e.g. Saudi Aramco & Saudi Basic Petrochemicals ,Petromin Shell & Jeddah Oil Refinery.

More than 10 years’ experience of coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore and onshore industries.

Working as a Rotating Machinery Specialist with specialist skills in machinery Componenant condition monitoring by Vibration analysis (CSI RBMware), Bentley Nevada DM2000 online monitoring system, Adre data collection, Flexware performance analysis, Ultrasonic check by CSI sonic scan and etc.

Strengths: detail oriented, flexible, analytical, self-motivated, adaptable, effective communicator and articulate. Experience in field drilling operation management with extensive hands-on technical, administrative and managerial functions; drilling technology assessment & implementation, contract

An accomplished and result-driven Management Executive with multi-faceted marketing experience. Exceptional communicator with demonstrated success interacting with people at all levels.

Lead Process Engineer for Oil& gas Offshore/Onshore projects for Conceptual, Basic /FEED and Detail Engineering, Optimization and De-bottlenecking

I have a total of 13 years of experience working as an Engineer in the Petroleum Industry. For the last 10 years I have been working as a Process Engineer handling all aspects from Conceptual Engineering through to the Detailed Engineering Phase. I am seeking work as a Senior Process Engineer.

Involved in commissioning and pre-commissioning activities.

To secure a long/short-term contract, or permanent position. In Construction, Maintenance, Commissioning etc. My current position is as an Electrical/Instrument Engineer (as to the above position I am negotiable).

Fourteen years of combined experience in petroleum engineering and G&G (U.S. & international.) Experience includes integrated 3D reservoir modeling, numerical simulation, reserves assessment, field development, and reservoir studies.

„Ï A thorough understanding of risk engineering and Health Safety and Environmental (HSE) management systems in petrochemical, chemical, oil & gas industries, gained in a consulting environment. „Ï Consulting experience related to Process Safety Management & Fire Audit, Dust Explosion

Health, Safety and Environment Specialist/Instructor with National (CIED-PDVSA) and International (North Sea) Certification. HSE and H2S Instructor. 20 years experience in Drilling, Production and Crude Oil Transportation in Safety related areas with National and International Operators and Contract

Professional Oil and Gas Geologist (Masters Level) with 10+ years global Wellsite and Operation Geologist experience. Experienced in pre-planning, supervising and post-well wrap-ups of multi-well/multi-rig programs.

Chemical Engineer, P.E. Petrochemical Design Background Experience

 11.0 years exp. normal Operations in a petrochemical & Gas plants mainly in operation of centrifugal compressors (cooper, kobelco & Elliott),reciprocating compressors ( IR ,SULZUR & Burckhardt ) ,all type of pumps (mainl

Rotating equipment / mechanical maintenance technician / Commissioning technician

Experienced, results oriented, safety minded manager

Oil & gas consultant with 29 years of experience and supervision on land, platform, jack-up and semi-submersible rigs. Proactive leader with strong communication skills, both verbal and written. Effective problem solver and decision-maker.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out