Resume - Instrumentation and Control Engineer

Misco Jobs

Resume #87310

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Automation: Automation course on PLC's using S5, Simatic S7 with Windows NT
& PCS-7 CEMAT V6.0, ABB 800xA and Honeywell DCS (Experion).
Operating System: Microsoft Windows 95, 98, 2000, ME, XP and Dos 6.0.
Programming Languages: C-Language & Assembling Language and MATLAB.
Technical Tools: Auto Cad, Orcad.
Applications Packages: Office 2000

OBJECTIVE:
------------
Professional, highly qualified Electronic Engineer with excellent organizational and team working skills.
Ideal candidate for position requiring drive, initiative, responsibility and challenge.

WORK EXPERIENCE:
------------
1. Worked as Trainee Engineer in Bestway Cement, Hattar (07.12.2003 to 11.06.2004) in its Instrument & Control department. It's a PLC Process controller plant, so beside introduction to field instruments, I got a chance to understand the hardware/software essentials of Siemens DCS (S5 155U), (CEMAT V4.1) systems.

2. Worked in Thatta Cement Company Ltd, Thatta from June 15, 2004 to September 30, 2007 as Assistant Manager (Instrument & Control) and following were my JOB RESPONSIBILITIES
ƒá I was looking after DCS matters and development of new changes in plant software program and HMI, checking of PLC Hardware, fulfilling PLC signal testing and commissioning jobs, provision of DCS solutions in case of urgency.
ƒá I was responsible to maintain the records, data log of daily checking and routine faults history according to the ISO standards. Also responsible to check on all general maintenance work and maintain their records.
ƒá To supervise the team and utilize their services in the best of the works. Also extend full co-ordination with Mechanical and production departments on scheduled maintenance of the plant.
ƒá Responsible to diagnose faults and maintenance of the filed instruments. Calibration of pneumatic, electronic instruments, weighing based automatic dosing systems and maintenance of other plant equipments.
ƒá Designing and work on MV switch gear, MCC, transformer control and circuits to improve plant performance and to minimize the production losses.
ƒá Responsible to organize and manage planned and preventive maintenance schedules for up-keep and maintenance of instruments and control systems.
ƒá Responsible for indenting to make possible availability of new spares, instruments and materials pertaining to my department as and when required.
ƒá Also responsible for training arrangements for new technical manpower. Also any duty assigned by HOD from time to time.

* Attended an exhaustive training on Siemens S7 DCS system programming during my stay as Assistant Manager in Thatta Cement Co. LTD., as well.

3- Working as Instruments & Control Engineer in Raysut Cement Co. Ltd, Oman since October, 2007.
It has 8000 TPD capacity round the clock running state of the art plants located in Salalah, Oman.
Raysut Cement is using latest version of ABB control systems for plant control as well as optimizer level controls for kiln, Raw mill proportion and pre-blending (Cross Belt analyzers) linked to the latest office IT (Knowledge Manager). I am working independently and able to handle following systems of this plant.
o ABB, 800xA DCS Control.
o ABB, ADVANT AC450 DCS Control.
o Expert Optimizer (Link man) for Pyro process controlling.
o Raw Mix proportioning Control.
o Cross Belt Analyzers for PreBlending controls.
o Siemens PLC S7-300, 200, Pro Tool.
o Different HT relays softwares, ABB VVFD software, o Have keen idea on different OPC interfaces for data exchanges.
o Familiar with the roller press hydrolic controls (Worked on KHD Pyrofloor cooler and grinding press).
o Familiar with SAP operation module.
o Planned and corrective maintenance job execution for smooth instrument operational execution.
o Planning for the spares to be procured for the continuous operation.

EDUCATION & CERTIFICATION:
------------
Secondary School certificate (S.S.C)
Public School Sukkur 1996 1st division

Higher Secondary School (H.S.C)
Atta HussainShah Degree Science College,Rohri 1998 1st division

Bachelor of Electronic Engineering(B.E)
NED University of Engg. & Technology. 1999-2002
(4 ¡V Years) 1st division
ƒá Member of Pakistan Engineering Council (P.E.C. No. ELECTRO/6650

ADDITIONAL INFORMATION:
------------
Reading books, Watching Science fiction movies, Travelling, Playing games
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9151 to 9200 of 10924)

Go to Search Parameters...

Brief Description

I have 2 1/2 years experience in the pumping industry working as an acid and cement pumper operator and 4 1/2 years experience as an acid and cement supervisor. I am knowledgeable in acidizing primary and remedial cementing. I am looking forward to furthering my career internationally.

Working as Technical Instrument Custodian offshore North Sea for Shell. Previously worked as Specialist Systems Engineer for Honeywell for 4 years.

Paralegal

Familiar with all steps of equipment, structure fabrication and piping installation as pertinent specification, document control, subcontractor management knowledge, claim representation and site safety conception.

Diverse technical back ground including hydraulic power plant technician ,fresh water analyst, pump mechanic, maintenance coordinator, maintenance mechanic, and valve installation repair

Draughtsman

Available Immediately To Discuss A Challenging And Responsible Position Where My Background And Experience Can Be Fully Utilized To Our Mutual Benefit.

I am an Electronic Engineer and I have a short experience in Oil & Gas field. My dream is to get an entry level position in this field especially in instrumentation field.

I am a hardworking and honest person looking to have a new career in the oil industry. I am dedicated to my work and would be a good employee.

Pip in indistrial safety, working in ministry of elec & water ,kuwait.

Computer Technician

Principal Environmental & Safety Consultant, oil, gas, mining & major projects; EIA, EMS, Environmental risk etc, climate change, HAZOP, HAZID, Safety managment etc experience. Relocating to Vancouver. Has right to live and work in Canada

Cad Drafter/Designer

Automobile related

Mechanical Engineering Graduate EIT - experience at underground mine sites, maintenance planning, drafting in autodesk inventor, physical asset management, underground mine hoist ropes and lubrication, scheduling

Eight years of experience in the field of Mechanical Engineering Works that primarily concerns on overall mechanical system and details design as well as fabrication.

Instrumentation and Control Engineer

Electrical Engineering, Energy Systems, Power electronics

I am Diploma in Mechanical Engineering. I have adequate knowledge in Auto-Cad in mechanical engineering field. I also have confident experience in X-Steel & SDS2 in steel structure back ground.

Graduate Electrical with Power Electronics

Sub.: Power plant /Utility Electrical Maintenance Engineer

B.Com (Commerce, MS-Word, MS-Excel, Tally, Emails, Internet & Other Software

Shipping Supervisor

Pipefitter with supervisory and training facilitator experience

Experienced Reliability Engineer seeks overseas rotational position (i.e. 28/28)

At present doing a 2 year contract at a bulk fuel installation, in Basrah, Iraq, as an Operator. I have 25 years experience as a fire fighter and paramedic and the last 2 years have been doing aviation and road fuels at an Airport and bulk fuel installation

I have worked with all the various vendor representative from the manufactures as well as many after-market repair vendors from the UK, Germany, France, Italy, Canada, and USA.

Environmental Engineer and Senior Project Manager

I am graduated with M.Sc.Applied Geology with Specialization in Geophysics. I have completed my Internship with Oil and Gas development company (O.G.D.C) in geophysical data interpretation of oil well. I have also worked on different softwares like Golden software (surfer 8), Didger, QuickSyn.

A professional LNG Technician/Engineer is looking for a position where his skills and education will add value to operations.

Prevent / correct unsafe acts & condition.

Auto CAD 14/2000i/2004/2005/2006/2007,AutoCAD Map, CAD Overlay, Map Info7.0,Arc View3.2

Education:B.Tech (Civil), Pondicherry Engineering College, Pondicherry Univercity, in 1997. Skills: AutoCAD, MS Office, MS Project and Primavera. Trainings Undergone: Green & Red Code Accrediation program by CED, JAFZA

International field work resume(non-abbreviated)

Looking for work as an Industrial Engineer - biligual.

LOOKING FOR JOB IN ANY POSITION

B.E.(Electronics & Telecommunication) with good academic records. working as service engineer in R.K. engineering services private limited.

Over twenty years of experience

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

QA/QC Engineer & Inspector for (Welding, NDT, Piping, Structure, Mechanical, Painting, Coating, Storage Tank, Electrical & Instrument) , Construction Supervisor and Field Engineer

Safety, Health, Quality, Environmental, Waste management, training, investigations, incidents, orientations,contractors, oil and gas, chemicals, construction, hazop, hazards, emergency response, job observations, near misses, safety alerts, hazard communications

Procurement & Supply Chain Management

Area lead designer, PDS ,Microstation, AutoCad, Smartplant review, Peligan Forge Support moduler.

INSPECTION and SUPERVISION (Welding / Piping / NDT / QA/QC / Mechanical / Materials / Coating and Painting).CSWIP 3.2,ASNT Level 3,NACE Coating Inspector,ISO Auditor

Quality Management, ISO 9001, ISO 14001, OHSAS 18001, Lead Auditor of IRCA, TUV-CERT

Had been involved in diversified organization for more than 7 years as Document Control, Management Information and Records Custodian. Knowledgeable in administering exchange of documents used of Document Control System, proper retrieval of documents in line with the ISO Standard and Procedures.

Seeking Chemist, Laboratory, or Quality Control Position

Worked in an oil and gas industry and undergone an intensive training .

MS-GIS, International MBA, Fluent english and spanish, basic Arabic

Perform repairs on Ford automobiles electical systems, drivetrain, driveability. Extensive training through Ford Motor Company.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 [ 184 ] 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out