Resume - Over (3) years practical experience in surface and underground mining environmen...

Misco Jobs

Resume #87390

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Over (3) years practical experience in surface and underground mining environments. Experienced in short-range mine planning. Knowledge in weekly and monthly production planning to ensure continuous supply of ore, optimum utilization of equipment and personnel, and meeting long-range mine plan objectives. Familiar with production scheduling and phase sequencing using Net Present Value (NPV) method. Strong interest in economic evaluation and statistical data analysis of operations for continuous improvement. Proficient in relevant mine planning and geotechnical software. Good at exploring innovative techniques to improve productivity..
------------

OBJECTIVE:

To obtain a challenging position that will allow for growth and a chance to use my knowledge and experience to add value.
------------

WORK EXPERIENCE:

Open Pit Mine Planning
Assisted in short-range mine planning meeting weekly and monthly production targets, long-range goals, and continuous supply of ore to processing plant
Estimated ore-waste tonnage inventory on a daily, weekly and monthly basis
Participated in production scheduling and phase sequencing
Assisted in maximizing mine shovels utilization through effective scheduling and digging plan
Compiled and analyzed MineStar daily production report for performance analysis and budgeting
Investigated the applicability of Aquila database information in fragmentation improvement design
Conducted time study on mine shovel and truck fleet for equipment selection and budgeting
Carried out comparative study on haulage optimization software-Talpac, FPC (by caterpillar), and actual travel times recorded by dispatch system
Worked with the dispatch department to help maximize equipment fleet
Assisted in ore-control planning using mine planning software and CAES (Computer Aided Earthmoving System)
Participated in open pit slope and waste damp design

Strip Mine Planning
Assisted in strip mine planning ensuring uniform flow of ore to crusher
Participated in dragline production scheduling and cut sequencing
Responsible for ore-waste tonnage inventory estimation on daily and weekly and monthly basis
Monitored dragline auxiliary equipment performance to ensure maximum productivity
Assisted in spoil dump design
Assisted in cost analysis and design of best reclamation plan for the affected mined-out areas

Underground Mine Planning
Assisted in short-range underground mine planning to support long-term mine objectives,
Assisted in underground cut sequencing and productivity scheduling
Participated in underground ventilation survey and design
Assisted in underground roof support design
Worked with underground geology team in carrying out underground mapping, channel sampling, and reserve estimation

Borehole Drilling and Planning
Responsible for drilling projects planning, design and performance evaluation
Responsible for drilling equipment selection and drilling contract bidding
Carried out economic evaluation on drilling projects
Conducted well logging and geological sample identification on drilled wells
Performed hydrological, geophysical site studies and supervised pumping test for pump selection and ground water modeling
------------
EDUCATION & CERTIFICATION:

2007-2009 Geological Engineering- The University of Arizona, USA
2004–2006 Mining Engineering- Pennsylvania State University, University Park, USA
1992-1997 Mining Engineering- University of Mines and Technology, Ghana
------------
PROFESSIONAL AFFILIATION

Student Member, Society for Mining Metallurgy and Exploration Inc. (SME)
Northwest Mining Association (NWMA)
Associate Member, Ghana Institution of Engineers (1999 -2004)
------------
RELEVANT MINE PLANNING SOFTWARE

AutoCAD, MineSight, Gemcon, Survcad, Runge (Talpac and XPAC), Modular Mining Dispatch System, Rocscience software, Statistical Software (Minitab, SAS), Excel Spreadsheet, Access, Crystal ball (Simulation and optimization tool for design and forecasting)

WORK HISTORY

May 2008 to September 2008 Mining Engineer (Intern), Newmont Mining Corporation, Nevada, USA
June 2007 to September 2007 Mining Engineer (Intern), CEMEX USA, Pennsylvania USA
September 1999 to August 2004 Drilling Engineer, GWCL Drilling Unit, Ghana
September 1997 to May 1999 Mining Engineer, Bonte Gold Mines, Ghana
May 1994 to September 1994 Student Trainee, Kass Quarry, Ghana
December 1992 to June 1993 Student Trainee, Ghana Goldfields, Ghana

TRAINING RECEIVED

Mine planning software (MineSight) training at Minetec, Tucson Arizona 2008, 2009
MSHA training 2008, 2007
Interpersonal skills training 2000, 2003
First Aid and CPR Certification

REFEREES

Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6751 to 6800 of 10916)

Go to Search Parameters...

Brief Description

PIPING DESIGN ENGINEERING

Seek employment as a software development and database specialist for your organization. I'm an expert programmer with 10 experience in Oil and Gas industry. Designed Production systems, Safety and Controls, and Automation Systems as well as Business Intelligence apps.

Mechanical Engineer MSc. 5 Years Experience

all relevant skills and contact info

17 yrs experience - industrial & construction industries - mobile plant management Operations Manager - Oil Electro Ltd - Baku Azerbaijan Manager - BOC Gases - Solomon Islands Manager - Macfarlane Generators - Generator hire, sales & service Stock ordering & control Computer literate

Civil Engineer - looking for infrastructure work in the oil industry

Completions/Sandface Supervisor with 5 years relevant Experience.

I am seeking an international position as a petroleum geologist. I am an innovative thinker with a demonstrated ability to improve production and decrease down time. I have a strong computer and language skills. I have MS Petroleum geology and experience of 2 years.

More than 18 years (Around 8 years of International experience, which include Saudi Arabia, Dubai and Sultanate of Oman,Qatar) of experience in project planning, Scheduling, Resource Planning, Cost Estimating, Cost Budget, S-curve preparation, Project Co-ordination, Project Monitoring.

Operator, Shift Production supervisor. Highly motivated & enthusiastic individual who has a broad range of life skills and experiences, including people skills; seeking for challenges. Extremely comfortable working within team environment.

Engineering: Civil Structural Mining and Project Management

I am looking for the opportunity to perform in this capacity for an Engineering company. In view of your company’s objectives and possible openings. I believe that my qualifications are an ideal match for position. I studied and attained A Diploma in mechanical ( Tools & Design )

10+2 with P.C.M. from UP Board and having G.M.D.S.S. Certificate from DG shipping, like to make the candidature for the same.

multi ndt technician ASNT level II

Logging engineer

I experianced in piping jobs about six years. My qualification is only high scool. & i have passed some standard courses(details in the below resume) regarding piping & safety in singapore.

B.S. in Chemical Engineering with a good background in Chemical Process environment .

Process Engineer and B.Tech Chemical Engineer from IIT, India looking for a bright opportunity in Oil and Gas Sector

Field Engineer for Schlumberger graduated from Sultan Qaboss University with bachlore degree in Telecommunication and Signal processing

I am an HND graduate in Petroleum Engineering, got the ability to work in an environment where innovation, integrity, implementation and impact are necessary ingredients of success, ready to work with the team,with little or no supervision and perform task even under pressure.

Senior Civil Structural PDMS AutoCAD Designer

IT Specialist with emphasis on Project Management, Technical Services and International Project Coordination

Metallurgist, Welding Inspector, CSWIP Radiographic Interpreter Level 2, ASNT Ultrasonic Testing Level II

Administrative Officer cum Sales Coordinator

Working as a process engineer in reputed company, Finished the B, tech., (chemical engineering)

Hydrocarbons measurement specialist (crude oil)

A person with 5 years extensive experience in making Design Drawings and Working Drawings for both Mechanical and Civil fields using Auto CAD and Micro station.

Growth with Profit (Marketing, Operations, Sales & Business Development)

Master Mariner/ULCC/VLCC/FPSO/Marine Bulk Oil/Port Captain/Marine Superintendent/Company Representative/Marine-Project-Operations-Manager/Oil Terminal Manager

MBA, 100% Spanish and English.

Executive management, business development, supply chain, IT, embeded system

B.Sc (Hons) Accounting. Ability to learn and assimilate, Good team player with analytical mind, Ability to adapt in any given situation, Good communication and problem solving skills

PRO-ENGINEERING Designing Software,3D Solid Works Designing Software,MS office, Basics of C language.

But I have directed groups of technical people as well as managed a mexican project in monterrey.

Cswip 3.4U Underwater Inspection Engineer CV

Over (3) years practical experience in surface and underground mining environments. Experienced in short-range mine planning. Familiar with production scheduling and phase sequencing using Net Present Value (NPV) method. Proficient in relevant mine planning and geotechnical software.

Planning Engr. + primavera + MS Project + AutoCAD

Goal oriented professional with experience in corporate and agency recruiting, customer service, training & supervision. Proficient at handling multiple tasks simultaneously, problem solving & articulate with strong interpersonal skills.

Dedicated material control and procurement specialist for piping, electrical and structural materials in the energy, oil and gas industries. Proficient in timely requisitioning of inventory items with outstanding verbal and written communication skills.

Electronics Engineer with more than 10 years of combined experience Instrumentation and control, Electronics, Software, PLC, DCS working as Electrical and Instrumentation Engineer in an EPIC Project with proven abilities in Configuration, Calibration and testing, Pre-commissioning, Loop Checking

1. Petroleum Geology and Geophysics. 2. Knowledge of global Drilling Practices, equipment, and methodology, drilling Flude, Cementation, and Casing. Primary, Secondary and Enhance Oil Recovery Techniques. 3. Different kind of well logging. 4. Reservoir modeling. 5. Magnetic, Gravity and Seismic Surv

Qualified for Piping Stress Analysis Static and Dynamic knowledge with CAERSAR II Stress analysis software certification by COADE, ASME B31.3 Piping Process Standard knowledge, International codes & Standards such as ASME, ASTM, API, ANSI, DIN etc, Piping Engineering knowledge,

I finished Masters in chemical and process engineering in Otto-von-Guericke University, Magdeburg, Germany and I did Bachelors in Mechanical Production and Industrial Engineering in Andhra University, India. I am skilled to learn the new things easily and perfectly.

Stress analysed all of the critical piping systems in which are under critical conditions in onshore and offshore projects including PSV''s, piping connected to rotating/static equipments/1200 kW reciprocating compressors, piping subjected to tank settlements, bridge movements and etc.

B.Sc. (chemistry) 13+ years experiencei in oil/gas &petrochemicals plantoperation. Experience to work with contract resourses(USA), UOP(USA), planttech(india)COSDEN(USA) people in enert entry in vessels for catalyst replacement jobs. DCS /PLC experience, fire trainning, first aid trainning attended

Control Systems Engineer

Confident and experienced engineering professional.Skilled communicator and determined influencer. Computer literate.

Knowledge in Autocad 14, LT2000, 2002, 2004, Pipe Designer 3D.

I have a stable work history having spent four years working as a Mechanical Engineer within the Teyseer Group in Qatar. I have a broad range of experience including project management, site and field works, tender preparation, etc. On Sep 2004, I graduated as a Petroleum Engg (Masters Degree).

Over 15 years experience as a instrumentation & control engineer in oil/gas , petrochemical industries. For the past seven years , I have been also involved in SCADA system in detailed basic engineering, integrating, commissioning and maintenance.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 [ 136 ] 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out