Resume - More than 2.5 + years of experiences in the field of Planning as a Planning Engg...

Misco Jobs

Resume #87399

CONTACT INFORMATION:
View contact information...

Carrier Objective:

To set my steps firmly into this world with confidence, with desire to excel in any field of my job responsibility, learn and mould myself from various challenges around me and evolve into a better competent professional and a better human being. Truly quality conscious on building up quality within the system on par with the National and International Standards.

Job Profile
More than 2.5 + years of rich, in-depth, varied experiences in the field of Project Planning & scheduling for Engineering, Procurement, and Construction (EPC) of Pipeline (Oil and Gas - Refinery) projects. Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of Engineering, Procurement, & Construction (EPC) deliverables and activities for Pipeline (Oil and Gas - Refinery) projects.

Professional Experience:
Organization: PUNJ LLOYD LTD, DOHA, QATAR. (DEC 2007 – Till date.)
Designation: Planning Engineer.
Project: 18"x42Kms Multi Product Pipeline Project.
Description of the project: The project comprises of the new 18" Multi-product pipeline from QP Refinery at Mesaieed to Doha Depot consist of 42 Km, and emergency loading system for the multi-products and LPG at the QP Refinery. Pipeline block sectionalizing valves which are to be installed along the pipeline within BSV-3.The project also envisages decommissioning and demolition of the existing multi-product emergency loading system inside Mesaieed QP Refinery.
Client: Qatar Petroleum.
Consultant: Nama Mott-Mac Donald.
Industry: Oil / Gas.
Department: Project Management.
Project Cost: 110.5 Million USD
Responsibilities:

Responsible for the planning, supervision of all activities comprising the project.
Schedule the preparation for construction in primavera project planner with resource loading.
Determines actual project accomplishment and evaluates general contractor's billings and Project Closeout.
Preparation of Planning Documents, Construction Schedules and budgets, Billing Schedule, cash Inflow/outflow.
Preparation of Daily Progress Reports, Weekly Progress Reports, Look-ahead schedule and Recovery plans to achieve the targets.
Construction progress updating on monthly basis in primavera.
Tracking, following-up and reporting the project progress.
Working on web paged ORACLE 11i for processing Project Invoices and generating Standard Purchase Order.
Co-ordination with Engineering consultants and Procurement department.
Presentations in Project Review Meetings for Client.
Monitoring variations orders and ensure changes are updated in the project manual.
Submission of Specifications and procedures to Client for review/approval.
Preparation of Manpower and Equipment List.
Preparation of the Project close-out Report and the schedule.
Preparation of Productivity feed-back data to Project Control Department and Commercial Department.

Organization: AYOKI FABRICON PVT LTD,RAIPUR, INDIA (APR 2007-NOV 2007)
Designation: Planning Engineer.
Project: Ambuja Cement Thermal Power Plant project.
Description of the project: Construction & Installation of three Thermal Power Plants (70TPH, 80TPH & 135TPH).
Client: Ambuja Cement Ltd.
Consultant: Thermax India Ltd.
Department: Project Management.
Responsibilities:

Responsible for the planning, supervision of all activities comprising the project.
Project execution, dealing with clients for necessary approvals and deviations.
Preparation of planning documents and construction schedules.
Preparation of Daily Progress report, Weekly Progress Report and Monthly Progress Report.
Generation of Progress Curves, Manpower Histograms and Key Quantity Curve.
Establish project material requirements.
Preparation of Monthly manpower productivity analysis and manpower histogram.
Plotting Progress S-Curves Planned Vs Actual.
Educational Qualifications:
QUALIFICATION UNIVERSITY YEAR OF PASSING
B.E. Mechanical Anna University, Tamil Nadu, India 2003 - 2007
12th Kerala State Board, Kerala, India 2001 - 2003
10th Kerala State Board, Kerala, India 2000 – 2001

Additional Qualification:
ASNT Level II - Radiography Testing.
ASNT Level II - Ultrasonic Testing.
ASNT Level II - Magnetic Particle Testing.
ASNT Level II - Liquid Penetrant Testing
Technical Skills:
Proficient in PRIMAVERA PROJECT PLANNER (3.1, 5.0 e/c, 6.0 e/c).
MS Project Planner.
ORACLE 11 I for generating Standard Purchase Order.
Application Software's: MS Word, Excel, PowerPoint, Auto CAD 2006/2007 and 2008.
Achievements:
Member of ASME (9464173) (American Society for Mechanical Engineers).
Conducting H2S/BA Awareness course from Qatar Petroleum.

Personal Details:
DOB - 19th December 1985
Languages Known - English, Hindi, Tamil and Malayalam.
Nationality - Indian.
Sex / Marital Status - Male / Single.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7901 to 7950 of 10884)

Go to Search Parameters...

Brief Description

B Sc. Chemical engineering • Over 3 years experience including in process development

I'm petroleum and Gas Engineer in specilty Development and Exploitation of Oil & Gas fields,taking my degree from Kuban State Technical University Krasnodar Russian Federation in 1999.From this university done 1 year advance course in the same specialty

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

Knowledge Of Autocad, Pro-engineer, Catia, Unigraphics, Ideas

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

More than one and a half year of hands-on experience in Instrumentation and Project and Sales.

Control & Instrumentation Engineer with 5 year Exp in Detailed Engineering

I'm a geophysicist.

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Senior piping designer

Turbine tech.

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

It is my intention to secure a career in the field of Health and Safety on an oil/gas platform. However, since I am new to the industry, I will consider any position.

B. Eng. Petroleum & Gas Engineering University of Port Harcourt, Rivers State, Nigeria.

I can work floors, motors, and derricks.

I have a very strong back and am not affraid of hard work. I am very punctal

Geology, To be graduated.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

chemist, AUC english course, computer course, 2008 graduation

I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

Knowledge & exp. in Electrical and Instrumentation products, in PLC, SCADA and HMI systems, drives, field instruments, Allen Bradley - Micrologix, SLC, ControlLogix, Compact Logix, Flex Logix PLC’s, Panel View Panel view plus Families, in Controlnet, Devicenet, RSView32, RSView SE Redundant

Microcontroller Application, Interfaces Application - PLC (SCADAPACK,OMRON,GE Fanuc, etc), ADAM RTU,EXPERT Module,Flow Compute (OMNI,Sybertrol,AutoExec), Compact PLC (MOXA ioLogik)

Skills: semi skilled fitter & turner, horizontal boring mill, veritcal borer, central lathe, fitter, oilmaker, piefitter, milling machine. I will be finishing my N2 early March to be qualified.

I am very much interested in Oil Gas Exploration.

I've studied chemical Engineering. I passed some curses in drilling fluids, well log, zagros formation studies, and also water treatment

I am a female geologist who is currently doing my masters in geology. I finished from the University of Port harcourt, rivers state In Nigeria. I am a team player and still able to work independently with minimum supervision.

More than three (3) years experience in Mechanical Engineering in offshore/ onshore Oil and Gas Production.Application of Incident and Injury free approach in project, HAZOP study in project.

Chartered Accountant with three years experience in Oil and Gas Industry

I would like to work with a company that is well established and stable.. I enjoy working in the Oil & Gas Industry because of the people I have meet and worked with...I want to learn more about different aspects of the Industry and look forward to moving up with a good company.

8+ years in the field of Cost Analysis (Estimation & Cost Control Function) for Refineries, Petrochemical Complexes, Oil & Gas Pipelines / Terminals and Fertilizer Projects

I work at present servicing a fuel storage depot as a Maintenance Electrician, Leading Hand. I have 6 years experience of this type of work and many specialised qualifications in this area.

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

Mechanical engineer B.Tech. 6 yrs experience.(UAE) exp in dealing with contractors, sub contractors etc , contacts with major oil companies like adco,etc in UAE, excellent knowledge of UAE market .

can apply any job which you think I am fitting for

I am looking for a job in Oil Industry. I'm willing to "Hard work" and work with "Any entry level position" with your concern. I certainly would appreciate it very much if you could give me an opportunity in your company. I am confident of doing a good Job with your concern.

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

Chemical Process Engineer, Aspen Plus, HYSYS, MATLAB, CHEMCAD, Reviewing PFD, P&ID, Design Specifications

I m Final Year Student of Mechanical Engineer and will be pass out upto december 2006. I want utilize my knowledge and skills for an organization, which offers opportunities for personal growth and career development.

Icorr paint inspector/rope access technician

Experice engineer with project engineering and project managemnt

Mechanical Engineer

working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.

To continue employment in the field of oil & gas operations. I will bring dedication, good work ethics, and teamwork to your company.

Hard Working, faster to learn, Capable to working by individually or as a team and Capable to working in any different area

All qualifiations are posted on my resume exept that i have a passport.

First Prev 151 152 153 154 155 156 157 158 [ 159 ] 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out