Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #87456
next resume »»
CONTACT INFORMATION:
View contact information...
Carrer Objective:
To work in a challenging and dynamic environment and to keep adding value to the Organization that I represent and serve, and to myself, while concurrently upgrading my skills and knowledge.
Education:
B.E. Chemical Engineering with Distinction and aggregate of 76.00%.
Work Experience:
Essar Oil Limited:
May 2008-Till Date
Post:Assistant Manager (Shift field Engineer)–CDU/VDU Operations
RESPONSIBILITES:
SOLVING OF PLANT TROUBLE SHOOTING AND EMERGENCIES
* Solving of process upsets and analysis, start-ups, shut downs, incident reporting and providing suggestions for improvement.
OPTIMIZATION OF VALUE ADDED PRODUCTS
* Continuous monitoring the yield of value added products, adjustment of process parameters if required.
* According to market valve optimize the production of LPG,ATF, Naphtha.
DESIGN AND MODIFICATION OF PROCESS FOR BETTER OPERATION
* Finding out the changes to be done in the plant for its smooth running and preparing the Plant Change Notices which includes detailed engineering, equipment data sheets and HAZOP reports.
* Preparation, Correction and Reviewing of PFD, P&ID of CDU/VDU (Crude distillation Unit).
OPTIMIZATION OF POWER, CHEMICALS, UTILITIES etc.
* Daily monitoring of chemicals, lube oil, utilities consumption and its optimization.
PLANT OPERATIONAL
* Experience in handling the Fired Heaters, Pumps, Compressors, Heat Exchangers and Distillation columns.
* Start up, Shutdown and Changeover of various equipments and unit operations.
* Carrying out the daily job and coordinating with the panel operators for the smooth running of the plant
* Line Sizing, Pressure Relief valve sizing, Equipment list Preparation etc
* Deluge system F & G system, ESD system, and Interlock system
* Internal inspection of vessels and tanks
* Loops and logic checks at site and field.
* Detailed knowledge about control instruments like FT, I/P Converter, Pressure transmitters, level transmitters, RTD etc.
* As a team member in shift team for CDU/VDU & SGU, coordinating and managing both internal and inter-discipline work interfaces, and executing activities cost effectively.
TRAININGS:
* HAZOP Study.
* DCS Control panel & APC Training by ABB.
* Permit to work.
* On Site Emergency training.
* Safety audits.
* Risk assessments.
* Fire & safety training.
ACHIVEMENTS:
* Successfully involved in major turnaround of refinery.
* Successfully taken major shut down for revamp and start up of refinery in 18 days.
* Successfully handled major fire and emergency shut down due to power failure.
* In first year of college was the topper of branch in college and in other years
* Were top three positions of class and in University.
* Awarded many certificates for obtaining highest marks in many of the
* Subjects in university which I studied in engineering.
* Taken active part in Debates and Elocution competitions in college and in school and won prizes.
* Only student in Class who obtained throughout Distinction in engineering.
ACADAMIC PROJECT AND TRAINING DETAILS:
* Done a project on the topic Manufacturing of Chloromethanes as
Fulfilment of curriculum. Done the feasibility of process, material balance,
Energy balance, process equipment design and cost estimation.
* Taken In Plant Trainings in Gujarat Alkalies and Chemicals Ltd, Vadodara and
Diamaines and Chemical Ltd, Ranoli for Duration of 6 Weeks as fulfilment
Of curriculum.
Computer Skills:
* MS Office and Visio
* C and C++
* Aspentech Ip-21 and Hysys
* Matlab
* LIMS
* SAP
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 8951 to 9000 of 10903)
Go to Search Parameters...
Brief Description
Electrical Engineer/Manager in Petrochemical Industries and Electrical Power Companies in Testing, Commissioning, Design, Projects, Plant Engineering, Maintenance, Operation, Technical Services, Training. Developement, System Improvements, Problem Solving, Analysis, System Study, etc
Well-rounded background in planning and scheduling. Experienced user in project control software applications such as Primavera P3 and Microsoft Project. Extensive knowledge and experience in all Microsoft Office applications. Adept at analysing detailed low level project control data and trans
Very experienced Welder, Pipe fitter, Foreman
Construction Engineer/Construction Specialist/Electrical Specialist/Construction Manager
A multidiscipline Engineer with over fourteen years experience within the petrochemical, Oil and Gas industry. I have extensive hands on experience on a variety of machinery and have managed multi ethnic; multi disciplined teams on a variety of jobs. I can work to strict timescales and budgetary con
I have over 16 years experience in Health, Safety, and Environmental (HSE) and have 4 years experience working overseas with employees from various cultures.
Operations, Purchasing, and Sales Manager
mining foreman and operator: 11 years experience; Mine operator Certification; Miner's Safety Training Fire and Aide Crew; Emergency Medical Technician; Experience running hydraulic excavators, motor graders, bull dozers, front end loaders, electric shovels, etc...surface mining
Good manager- exact-lovely-like travel-profetional in supporting in surface and tunnel excavation-english and arabic and farsi -hard worker
22 years heavy equipment operator
Inspection, Record Keeping, Supervision, Lighting, Fire Alarm and Communication Installations in all the buildings, Cable pulling/arrangement/terminations, Panel Installations, Cable tray and Assorted Fabrications, Piping( PVC and Galvanized Steel), Pre and Post Termination Tests, Maintenances.
Experienced professional in Accounting
Piping Draughtsman with 2 years experience
Geologist with 5 years experiences, with a blend of strategic and operational experience in coal exploration, with the combination of hard skill in geological mapping and drilling with soft skill in geographic information system, geological database up to geological modeling.
Mechanichal Enginnering Diploma,AWS Certified Welding Inspector, Level 2 in RT,UT,PT,MT,VT
Piping Designer / Draftsman
College education and master's degree in civil and environmental engineering within the research area of construction engineering and management
Petroleum Engineering – (Exploration & Development) Diploma
Experienced with Electronic Flow Computers along with having the basic knowledge of gas chromatographs, samplers, moisture analyzers and ultra-sonic flow meters. Along with experience installing and troubleshooting 900 MHZ, cellular, microwave, satellite and two-way radio systems.
A highly motivated individual who strives for success. Detail oriented with limitless learning capabilities. Capable of working under stressful measures while always committed to meeting deadlines. Exhibits strong leadership abilities.
Dear Sirs, i want to find any job possibilities with your company
I am looking for full time employment in a general labourer capacity
Fifteen years experience in management, manufacturing and engineering with emphasis on quality assurance, environmental and safety.
Sr. PDS Piping Designer, Chemical, Petrochemical, Slurry esperience. Very strong in ALL elements of PDS including administration and support.
Knowledge of engineering theories and practices and an understanding of environmental principles involves with exploration, drilling, production and development operations.
Completion - Well Testing supv, Wireline logging engineer
Good understanding of power/load calculation, drawing of wiring diagram, trouble shooting, installation of electric motor, contactor circuit, transformator and PLC
Sales, Marketing,Business development,Automobiles, Spare Parts, Lubricants, ,Pipes, Construction Machinery,Trucks Concret Pumps, Tyres etc.
HSE 6 years experience in the field of oil and gas industries, petrochemical industries :operation and construction .worked as COW ( control of work coach ) , PERCO (Permit To Work Coordinator ), safety Advisor , And Safety Inspector Able to work in Site Supervision, preparing reports, coordinati
I am looking for a full time position within the oil and gas industry preferably as I am studying land administration in school.
10+ years expereince in accounting, tax, audit. Expert in implementing MYOB Accounting
Over Two years of experience in Petroleum Refining & Downstream process, and Chemicals in the Field of Continuous Process plant Operations as a Asst. Manager and Shift Feild Engineer, Troubleshooting of process and equipments handling, vendors co-coordinating, and Commissioning and Trunaround Exp.
An M.Tech(Electronics) graduate with work experience in Industrial Automation, Embedded programming and teaching.Key skills include:SCADA, C, C++, Embedded C, VHDL, Verilog, MATLAB, Communication Protocols.At present, working for ABB India and has successfully completed a number of projects.
Microsoft Office, HRMS, Windows XP, Professional, other administrative softwares
Modeled and prepared detail engineering drawings for the projects executed interference checking and subsystems interfacing for the entire equipment.
Engineering
Materialsman/Coordinator with 10 year experiance of oil field, Supply base, Offshore Rig and Land Rigs
Power Transmission Line & Lighting of Highways, Electrical Design & Low Voltage, Electromagnetic Field
Experienced involved problem solver with more than nineteen years of progressive experience, offering significant expertise in project management, manufacturing and oil and gas accounting management, and focused on management operations and am able to continue to learn new processes and apply them.
I am an advanced Scaffolder (CISRS), Advanced Scaffold Inspection, Risk Assessment Trained, and am Computer Literate. I have an extensive understanding of scaffolding and design, the importance of health and safety and the best ways to achieve the goal of supplying clients with a cost effective and
As evidenced by resume I am extremely skilled in sales management and business development. I have extensive knowledge and experience in electrical, mechanical, mining ans sales/service management.
Very flexible, Diverse experience. Looking for a place to excel.
I have over 10 years as a driller and derrickhand
17 years safety experience, Grad Dip OHM, MSIA, (RSP Australia), Trainer
Piping designer
Experience in pipeline, Power Plat Installation
Technical Writing with 15 Years of Experience in the UAE
Electrical engineer, Constraction, Control & Instrument, Coal, Oil & Gas projects,
Seeking Managerial or Supervisory position in Logistics & Transportation.
instrument supervisor 5 year experiance
First
Prev
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
[ 180 ]
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
Next
Last
Seach Parameters
Change search parameters...
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com