Resume - I am a qualified analytical chemist, possessing extensive experience in internat...

Misco Jobs

Resume #87489

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
To secure contract employment in a senior level position and be afforded an opportunity to apply 17 years of experience to contribute to the growth of the company. I am a qualified analytical chemist, possessing extensive experience in international aspects of operations (U.S. EPA regulations, ISO 9001/14001/17025 standards, Project Safety Management PSM/OHSAS) with a wide range of technical proficiency in Health Safety Environment, waste management and document control.

WORK EXPERIENCE:

Training Partners Limited (QatarGas Operating Company LTD)
Ras Laffan, Qatar
Procedure Writer/Laboratory Subject Matter Expert
(3/08 – Present)
DUTIES / RESPONSIBILITIES:
As the laboratory subject matter expert I am required to generate analytical operating procedures and training manuals based on applicable ISO/ASTM methodologies and PSM/OHSAS safety regulations. I work directly with the client to determine sampling points and protocols throughout the LNG plant. I have also developed laboratory control tracking charts in compliance with ISO 17025 to monitor analytical trends using 3 sigma software.

ABS Consulting Group (Kuwait Oil Company, KOC)
Ahmadi, Kuwait
Technical Procedure Writer / Laboratory Consultant
(4/07 – 3/08)
DUTIES / RESPONSIBILITIES:
As the lead laboratory procedure writer, I developed analytical procedures in accordance with ASTM, ISO, OHSAS and PSM guidelines for all analyses performed in the crude oil labs and salt water treatment labs. I generated training manuals designed to safely guide bench-level technicians through sampling and analytical procedures while ensuring compliance with local and international protocols. I also performed risk assessment studies for all employees working in laboratories associated with downstream petroleum operations. Additionally, I worked directly with the client to perform risk assessment studies for all laboratory and field tasks.

Kellogg Brown & Root
Iraq
Chemist/Process Control Analyst
(10/05 – 4/07)
DUTIES / RESPONSIBILITIES:
While serving in the Iraqi theatre of operations, I assisted in commissioning 2 water purification plants and performed laboratory analyses to ensure that drinking water quality standards were being maintained. I established a laboratory QA program in accordance with ISO 17025 protocols and implemented QC procedures to ensure legal defensibility of all data.
ManTech International (NELAC Certified)
Athens, GA
Senior Pesticide Chemist (contractor to Region IV EPA)
(3/02 – 5/05)
DUTIES / RESPONSIBILITIES:
My duties as a senior chemist included the analyses of PCB's and pesticides by GC/ECD and volatile compounds by GC/MS. I maintained laboratory equipment through routine and demand maintenance, performed instrument calibrations as necessary, prepared stock and working level standards from neat or vendor solutions as required, assisted junior chemist and supervised the organic extractions lab.

Accura Analytical Laboratory (NELAC / CLP Certified)
Norcross, GA
Senior Chemist
(6/98 – 2/02)
DUTIES / RESPONSIBILITIES:
My duties as a senior chemist included the analyses of semi-volatile compounds by GC/MS, PCB's and pesticides by GC/ECD-NPD, petroleum hydrocarbons by GC/FID and gross alpha/beta particles. I maintained laboratory equipment through routine and demand maintenance, performed instrument calibrations as necessary, prepared stock and working level standards from neat or vendor solutions as required, assisted junior chemist and supervised the organic extractions lab.

CH2M Hill (CLP / AFCEE certified)
Redding, CA
Senior Chemist
(7/96 – 4/98)
DUTIES / RESPONSIBILITIES:
My duties as a senior chemist included the analysis of petroleum hydrocarbons using GC/Hall-PID and PCB's and Pesticides by GC/ECD. I maintained laboratory equipment through routine and demand maintenance, performed instrument calibrations as necessary, prepared stock and working level standards from neat or vendor solutions as required, assisted junior chemist and supervised the organic extractions lab.

Quanterra Environmental Services (AFCEE certified)
Tampa, FL
Senior Chemist
(4/91 – 5/96)
DUTIES / RESPONSIBILITIES:
My duties as a senior chemist included the analysis of petroleum hydrocarbons by GC/Hall-PID-FID, all parameters of classical wet chemistry and organic extractions. I maintained laboratory equipment through routine and demand maintenance, performed instrument calibrations as necessary and prepared stock and working level standards from neat or vendor solutions as required.

EDUCATION:
Associate of Science degree
Environmental Science
Santa Fe Community College (University of Florida affiliate)
Graduation Date: 4/1991

Associate of Arts degree
Core Biology
Santa Fe Community College
Graduation Date: 5/1988

CERTIFICATIONS:
* ISO 17025, Laboratory Operations
* OHSAS 18001, Safety Auditor and Implementation
* ISO 9001:2000, Quality Management Systems
* ISO 14001:2004, Environmental Auditor and Implementation
* 40-Hour HAZWOPER (29CFR 1910.120)
* HM-181 DOT/IATA Hazardous Materials Shipping
* Total Quality Management (TQM), Corning Laboratories
* Technical Procedure Writing, American Bureau of Shipping (ABS)

PROFESSIONAL AFFILIATIONS:
* Member of Standard Methods for the Examination of Water and Wastewater
* Florida Society of Environmental Analysts

SKILLS / ABILITIES:
Expert in the following software applications:
* MS Excel
* MS Word
* MS PowerPoint
* Adobe
* HP Chemstation
* PE Turbochrome

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8001 to 8050 of 10816)

Go to Search Parameters...

Brief Description

Date of Birth : 29th February 1980 Branch : Electrical Engineering Institute : Jaipur Engineering College & Research Centre, Jaipur Languages Known : English, Hindi

See below.

Entry level petroleum engineer with strong background in reservoir modeling/simulation, well logging/correlation, production engineering and petrophysics. Excellent knowledge and experience with various computer applications and packages. Excellent problem solving and analytical skills.

To Become employed as a Instrument Designer

Three years of project controls experience in estimating, costing and scheduling/planning.

Over 8 years experience in the field of Lifting Equipment Inspection, QA/QC activities, Welding inspection, Product Inspection and Material Inspection.

I see basic understanding of geology, pore pressure prediction, procurement and bid process, drilling and rig equipment, well control, safety and risk analysis, well construction. I can work in teams or independently.

Resevoir Engineer

TO SECURE A POSITION IN WHICH MY EXPERIENCE AND SKILLS AS A REFINERY/CHEMICAL PLANT PROCESS TECHNICIAN WILL BE OF VALUE TO YOUR ORGANIZATION.

I am a 4th class Steam Engineer with 4 years experience in the Ammonia Refrigeration field. I am currently looking for employment in the oil and gas industry. I am very interested in furthering my career as a Steam Engineer.

Qualified E&I Technician with full understanding and experience in the installation, calibration, repair, testing and maintenance of nucleonics, various control systems, measurement equipment, fire & gas systems, fiscal metering, motor control, distribution and electrical installation.

Graduate Mechanical Engineer with a passion to work in an oil and gas platform.

Ambitious, enthusiastic and career-conscious, I am keen to acquire new skills and form part of a successful team. I would like to travel and apply the skills learnt during my Geophysical Sciences degree. Seeking to embark on a long and successful career in geophysics.

Engineering graduate with electrical branch

To pursue an excelling career in an organization that provides challenging and responsible opportunities where my analytical and functional skills and abilities will be an asset.

I am a Petroleum Engineer with a degree from the University of Oklahoma. I have two and a half years of experience working on offshore rigs in the Gulf of Mexico in drilling operations. I am interested in opportunities in the fields of drilling, reservoir, well or operations engineering.

Condition monitoring Engineer

Mechanical Engineer

Graduated in B.E. (Chemical Engineering) from Gandhi Institute of Engineering and Technology (GIET), Gunupur, under Berhampur University With 69.32% marks

Four and a half years of production stimulation experience in the oilfield, including job design, execution and evaluation. Proven proficiency in fracturing, gravel pack and matrix acidizing with knowledge of logistics and operations management.

An energetic, enterprising and hardworking strategist

MBA (Finance) Bronze Medalist with strong financial & credit analysis and risk assessment skils.

sales, marketing, business development general management

Engineering and Management

Drilling & work Over Supervisor, Master degree, 5 years experience in Offshore & Onshore operations

Excellent analysis and problem solving skills and able to multi task in industrial sites, factories and refineries. Have knowledge of electrical utilities and power. Expert ability to resolve conflicts during all stages of a project.

Experienced Document Controller in FPSO industry. • Knowledge on Electronic Data Management System (eDMS). Proficient in Windows Application (MS Word, Excel, Outlook and Powerpoint)

to obtaian a job

I've been working in the diesel business for over 10 years. I do everything from general maintenance to major rebuilds. From office type work to operating equipment when need be.

27 years experience primarily in oil & gas EPC/EPCM Project controls, Contracts, project management and engineering.

PETROLEUM ENGINEER WITH 6 YEARS EXPERIENCE IN DRILLING, COMPLETION AND WORKOVER

I have several years of experience working in international trading (export and import), manufacturing, international shipping, and forwarding companies. During this time, I have obtained excellent knowledge of domestic and global logistics, and supply chain management.

16 years exp. in Design/Drafting, Softwares AutoCad 2004, Microstation J/V8, IRASB, AutoCad Overlay, HVAC system layouts Duct layouts, Equip,Layouts, Utility/Fire prot.sys layouts,Steel Structural detail drgs, Familiar in Int.stands.Exp.in High Rise, Industrial/Commercial Bldgs, Housing, Airports

I am a qualified analytical chemist, possessing extensive experience in international aspects of operations (U.S. EPA regulations, ISO 9001/14001/17025 standards, Project Safety Management PSM/OHSAS) with a wide range of technical proficiency in Health Safety Environment, waste management and docume

Bachelor of Engineering (Chemical), Bachelor of Engineering (industrial)

Many years of experience, very detailed orientated.

Mercahant marine

Senior Manager looking for a new challenge with expectations of executive advancement upon successful proof of capabilities

Electrical engineer with experience in oil field electrical construction works. Possess IRCA cerification for Quality Management System and MS project and autocad 2000 certification

Twenty plus years of experience in electrical construction, maintenance. International experience in Middle East and South America. Willing to discuss any and all opportunities available.

Chemical Engineer with experience in production with a reputed Petrochemical industry as Engineer (Production). Responsible for operation and maintenance of Production section which includes a Hydrogen plant using Catalytic steam reforming process and an Auto-oxidation plant for peroxide.

Commissioning, Testing and Maintenance of Generators, static excitation system , Protective Relays, 220kv Switchyard, Power Transformers, 6.6kv Switch Gear 415v Switchgear, 415VMCC

A B.Eng. degree, 2nd class honours (upper division) in Civil Engineering. He has worked with several copamies since his graduation and has acquired experience in his field of study. He is a good team player, honest, hard working and timely.

I'v the pleasure to present my c.v to all your respected well known organizations

An Oil And Gas Professional with an experience in handling technical and experience to coordinate with all related and responsible departments relating and involving to plants¡¦ operation and performance , to provide technical , service and commercial support to customers and end ¡V user¡¦s

Ten years working experience in the oil and gas industry, dispensing the role of QA / QC Inspector for Piping, Pipelines, Pressure Vessels, Steel Structures and Welding from fabrication and installation to pre-commissioning of oil production facilities, oil refineries, natural gas plants etc.

I&C Technician with geothermal experience

Petroleum Engineer with 3 years of experience in the Oil Industry, Production Supervisor (1 y), 230 wells SRP, PCP, ESP. Logging Engineer (2 y). Responsible, team player, work under pressure, team leader, analytic. Computational skills.Ready to be relocated. Toefl IBT 100/120

QC Engineer/Inspector (Piping/Welding) with CSWIP 3.1

A well organized, dedicated professional, developing, presenting, and implementing value added recommendations for the improvement to the companies overall goals and employee¡¦s performance.

First Prev 151 152 153 154 155 156 157 158 159 160 [ 161 ] 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out