Resume - Geophysicist with over 12 years experience in various aspects of geophysical wo...

Misco Jobs

Resume #87568

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To obtain a long-term challenging career in international Oil and Gas industry where I can grow professionally and be rewarded financially.

PREFERENCE
Exploration/Development Reservoir Geophysicist

KEY COMPENTENCIES

* Twelve years of experience in Exploration/Development reservoir geophysics.
* Substantial experience as a Seismic Interpreter as well as broad geophysical experience, both 2D and 3D.
* Good understanding of petroleum systems, basin analysis and prospect evaluation.
* Extensive experience in reservoir characterization in carbonates and clastics environments.
* Good technical knowledge of qualitative and quantitative geophysical evaluation technologies.
* Broad knowledge in computation technology and its application in E&P.
* Have the ability and confidence to work with minimum supervision and support.

EDUCATION
B.S, Geophysical Engineering, Geology Department, Bandung Institute of Technology, Indonesia.

PROFESSIONAL EXPERIENCE

PTTEP International Ltd (November 2007 – Now)
Senior Exploration Geophysicist – Bangkok, Thailand

* 2D/3D Seismic Interpretation and Multi-Attribute Analysis using Landmark Applications Softwares for Block B, offshore Cambodia, Gulf of Thailand, targeting miocene fluvial channel sands of sequence IV and top of oligocene. This exploration project is involving other partners: Singapore Petroleum Company (SPC) and Resourceful Petroleum (Malaysia).

* AVO and Fluid Modeling Analysis

* Data Room analysis. Study all geophysical related data in offshore Cambodia Block-B to seek an opportunity of farming-in within the concession area.

* Proposed 4 wells locations. Two wells approved to drill. One well drilled. Result: not economic, but the progonosed petroleum system worked in the area of interest.

* Mentoring on daily basis to local junior geoscientists.

PETRONAS CARIGALI Sdn Bhd (May 2005 – October 2007)
Exploration/Development Reservoir Geophysicist – Kuala Lumpur, Malaysia

* 2D/3D Seismic Interpretation and Multi-Attribute Analysis using Schlumberger's PETREL, Veritas Hampson-Russell and Landmark Applications Softwares for various development/exploration project fields: Resak-Beranang (Peninsular Malaysia), PC4 (East Malaysia), Ledang-Anoa (Peninsular Malaysia), Malong (Peninsular Malaysia), Calub-Hilala (Ethiopia, Africa)

* Velocity Modeling using Veritas Hampson - Russell, Landmark Depth Team Express and Schlumberger's PETREL for Time-Depth Conversion

* AVO - AFI (AVO Fluid Inversion) analysis on the above Fields.
* Elastic/Acoustic Inversion on pre-stack (the output volumes are acoustic impedance, shear impedance and density) and/or post-stack seismic (the output will be a volume of derived acoustic impedance). The final results are then used to predict logs from other logs, predict porosity from logs, or to predict sonic log from inverted seismic volumes.

* FRM (Fluid Replacement Modeling) on Malong Field.
* Always use Neural Network method as the ultimate algorithm to calculate qualitative and quantitative correlation among Rock Properties and Seismic Attributes.

* Time-lapse seismic analysis using Pro4D on fields: Resak, PC4, Malong.
* Analysis and interpretation of Multi Component (MC) seismic data (PP and PS reflectivity) to help study on Malong Oilfiled on fracture detection, imaging through gas clouds, lithology definition and fluid identification. Also to improve time lapse interpretation by helping to resolve non-uniqueness between pressure and saturation changes.

* Mentoring on daily basis to 7 junior geoscientists.

LANDMARK GRAPHICS Indonesia - Halliburton Inc. Ltd (November 2002 – April 2005)
G&G Consultant, Jakarta – Indonesia

- Achievement: Contribute more than 150% of individual revenue target set by company.

* Full Field Review of Malong-Sotong-Anding of Petronas Oil Field
- The work includes: 3D Seismic volume-based Interpretation and detail mapping, Velocity Modelling, Time to Depth domain conversion.

* Data Migration Project from Schlumberger's Geoquest Database to Landmark's Openworks Database:
1. Pertamina Balikpapan – Indonesia
2. ConocoPhillips Indoneisa

* Instructor for Landmark Application suites Courses series: OpenWorks, Seisworks, GeoProbe, Depth Team Express (DTE), StratWorks.
* Data Room Support for Texas-based El Paso farm-out oil fields.
* Onsite Project Consultant for Medco Energi and ConocoPhillips Indonesia
* Application Support for Pertamina Donggi Study

CHEVRON INDONESIA Inc Ltd (August 1997 – Dec 2002)
Geoscientist, Riau, Sumatera - Indonesia

* 2D/3D Seismic Interpretation using Geoquest Software
Results:
* 28 successfull infill wells, with oil production ranging from 500 to 1500 BOPD
* Helping Drilling Engineers to land on best target on deepened wells

* Velocity Modelling using Chevron's Velocity Toolkit
Results: Better Time to Depth domain conversion, successfully identify bypassed zones

* AVO and Seismic Inversion using Hampson-Russel Software
Result: Successfully delineate shallow gas distribution to help drilling team reducing drilling cost by using 2 strings instead of 3 strings

* Well Logs Database Management and QC using Finder Software
Result: A solid, ready-to-use and updated well logs database for subsurface team members

* Earth Model Building using GOCAD Software
Result: The Model can be used to be an effective tool to help reservoir engineers to make a surveillance study in waterflooded field and to aid production technologist engineers in designing well completion strategy.

* Wellsite Geologist for more than 30 Development/Directional Wells. The work included:

1. Performing wellsite works i.e.: identify lithology and hydrocarbon show from cutting/sidewall core/core chip samples, control MWD/LWD, supervise mud logging unit and wireline logging job, performed coring job, correlation – set casing / TD.
2. Post drill well reporting and development well evaluation.

MAXUS SouthEast Sumatera Inc. Ltd (May 1996 – August 1997)
Geophysicist, Jakarta - Indonesia

* 2D/3D Seismic Interpretation
* Well Logs Database QC & Data Management

WRITING SKILL:

* Poster on PTTEP 12th Technical Forum 2008: Seismic Data Compression Methodology
* Computer Network Vulnerability: Security Risk – CPI Internal Team
* New Method of soft-Digitizing Old Hardcopy Maps for Annual Reserves Book Preparation – CPI Internal Team
* Using Neural Network for Time-Depth Conversion and Extracting Rock Properties – CPI Internal Team
* Preparing Digital Images for an Efficient Presentation – CPI Internal Team

EDUCATIONAL EXPERIENCES:

* June 1993
Field Geological Mapping at Karang Sambung District, Igneous- Metamorphic-Sedimentary Area, Central Java, Indonesia.

* September 1993
On the job training in Seismic Data Processing, Nusantara Sistem Informasi (NSI) – Western Geophysical, Bandung, Indonesia

COURSE/TRAINING:
* Integrated Interpretation in Landmark Environment, Kuala Lumpur Malaysia
* Building Earth Model using GOCAD, Duri – Riau, Indonesia
* Geophysics School by Dr Peter Morse, Duri – Riau, Indonesia
* Geoframe: IESX and CPS3 for Advanced User, Jakarta Indonesia
* Reservoir Geomechanics: Earth Stress and Rock Mechanics Applied to Exploration, Production and Wellbore Stability, by Dr David Castillo, Duri – Riau, Indonesia
* Geolog for Formation Evaluation, by Dr Robert Gulco, Pekanbaru Indonesia
* Seismic Stratigraphic Interpretation and Modeling, by Prof. Norman S. Neidell, Jakarta Indonesia
* Subsurface Mapping Technique, Duri Riau, Indonesia
* Geostatistics for Reservoir Characterization by Dr Mohan Kelkar
* Coring & Core Analysis by Dr. Robert A. Skopec, Duri Riau, Indonesia
* 3-D Seismic Interpretation Advanced Technique, Duri Riau, Indonesia
* Voxelgeo Introduction & Workflow, Duri – Riau, Indonesia
* Sequence Stratigraphy Workshop, Duri – Riau, Indonesia
* Seismic Attribute for Reservoir Characterization, Bandung Institute of Technology, Bandung Indonesia
* Seismic Inversion for Reservoir Characterization, Bandung Institute of Technology, Bandung Indonesia
* Seismic Sequence Stratigraphy, Bandung Institute of Technology, Bandung Indonesia
* Jason Geosystem: Generating Acoustic/Elastic Impedance Map, Jakarta, Indonesia
* Decision Analysis, Duri – Riau, Indonesia
* Technical Writing, Duri – Riau, Indonesia
* Test of English as a Foreign Language (TOEFL), Grade 570
* Total Quality Management, Duri – Riau, Indonesia
* Presentation and Facilitation Skill, Pekanbaru - Indonesia

PROFESSIONAL
Member of SEG (Society of Exploration Geophysics)

LANGUAGE
Indonesian, English, Sundaneese

NATIONALITY
INDONESIAN (passport number: P686679)

BIRTH DATE
15 August 1971

MARITAL STATUS
Married with 2 children

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 10926)

Go to Search Parameters...

Brief Description

Over 20 years experience in the petrochemical and industrial gas maintenance, capital projects and construction field. Specializing in the repair and alignment of mechanical rotating equipment, pumps, compressors, turbines, valves, process piping and tubing. Management, scheduling and planning of w

Senior Piping Designer

25+ years experience in piping design of power plant,refinery, and chemical plant exoeriences. Field experience included.

I am presently the Subsea Toolpool manager for a major Oil operator's Subsea Wells dept operating in Angola.This work is combined with an ROV interface engineering workscope.

Diesel mechanic and maintenance on all generators, trucks, cats and vehicles. I also know welding and boat engines( inbord and outbord).

QA/QC NDT and RT Interpreter Coordinator 5 Years QA/QC Welding and Fabricating Inspector Lev 2 8 Years Welding Instructor /Team Leader 3 Years Supervisor/ Superintendent / Piping-Mechanical-Structural 7 years

Electrical Design, Drafting, Construction and Procurement

Autocad, microstation, frameworks 2-d and 3-d cad structural designer

Quantity Surveyor - Estimator for Oil and Gas, Petrochemical, Hydro Power Plant, Fabrication Shop, 24 yrs. exp.

Experience 2D, 3D, and 4D land seismic surveys. Vibroseis, dynamite and airguns. Terrain derest, bush, swamp, transition, heliportable and urban

Anhydrous Ammonia production for 30 years

Over 22 years in Plant Operation in round the clock shift duties.

Oil Industry 37 years, Regulatory, Environmental, Safety 28 years,

Worked in Irak, and Afghanistan , still have valid Work Permit and visa for Afghanistan, Gen technician

Sr.PDS/PDMS Piping Design Engineer/Designer / PDS Administrator /Lead piping Engineer/Designer.

A Mechanical Engineer with 20 + years of experience in O&M of large Diesel engines and various machineries in power plant and marine industry

Senior Executive with more than twenty years of experience, many of them abroad.

Project / Engineering of facilities for the domestic and international oil and gas industry with emphasis on Structural and Foundation Engineering. Strong knowledge of processing, and construction of platforms, pipelines, platform drilling /workover rigs, etc.

Offshore Oil & Gas Paramedic

Fifteen years of experience in Refinery, Oil & Gas and Petrochemicals field as a Piping designer in producing plot plans, Equipment Layout, Piping General Arrangement Dwgs, Piping isometrics, Jacketed piping isometrics, M.T.O., Stress isometrics, Sketches, Nozzle orientation and as-built Drawing on

Servicing oil and gas wells; running/pulling tools ,well clean outs using nitrogen

chemical engineer in pakistan steel mills

I am an IRCA (UK) Registered QMS 2000 Lead Auditor, currently working QA/QC Manager with an EPC Company for Yemen LNG Project, Balhaf site, Yemen.

Operation Management for FPSO / FSO

Petroleum Engineer with extensive experience in Drilling, Operations, Drilling Management. Trained in: Offshore, Onshore, Inland-waters. HTHP wells, Gas wells, Horizontal drilling.

Engineering professional with 17+ years of experience within diverse oil, gas field, refinery and petrochemical industrial arenas. Expert level engineer for instrumentation and control disciplines.

Reliability / Maintenance / Rotating Equipment Engineer with 20+ years of experience in Oil / Gas / Petrochemical / Utility industries.

Experience with handling database and managing data. Very familiar with writing database queries in SQL, as well as developing database scriptings. Industry expert in data quality.

Over 13 years of solid experience in piping stress/pds design for Refineries,petrochemicals,fpso&power projects.

To present my background and what I can do in the company with my skills.

Saudi Aramco Approved Vendor Inspector SAP No. 70004827, Certified API-510, Cswip 3.1, NDT Level2, ISO 9001.

13 years oil industry experience,• Drill wells up to 6500 mt, High temperature gas wells, drilling of horizontal multi-lateral hole, sidetracks, H2S Environment,Run 5 1/2" expandable liner & Run 4 1/2" completion assy., with 4 1/2" liner cemented off bottom

Sales Professional

Analytical, communication, result oriented, and learning for development

Experienced Operational personell in the field of oil and gas / petrochemical with commissioning experience

Geophysicist with over 12 years experience in various aspects of geophysical works. Proven solid experience in: 2D/3D seismic interpretation, Velocity Modeling, Acoustic/Elastic Inversion, AVO/AFI analysis,Seismic Inversion

Designation project supervisor in higher risk environment

Mechanical engineer graduated in 1991 from Damascus university (machinery department)since that date (15 years experience in oil and gas industry in onshore and offshore)I have been in several companies(SPC,SCOT,Alfurat petroleum co with SHELL in their gas plant.

20 years experience in process and laboratory analyzers in refinery and Petrochemicals operations world wide. Graduate degree in analytical chemistry. Willing to relocate.

Sr. Civil Structural Designer

Working as Well Site Geologist for Oil Field Instrumentation, India. Our client is MEDCO international an Indonesian company. Presently I am working in Oman. I have worked in the following fields of Oman: Simsim, Warad, Basma and Irad.

PANEL AND FIELD OPERATION

CAREER SUMMARY : Vast experience in the field of industrial piping, i.e. petrochemicals, fertilizer, synthetic fiber, refinery, polyester and pharmaceuticals industries. Main responsibilities includes - model review, piping designing, supports, drawings checking, site survey and coordination.

I have worked in the Oil & Gas industry for over 20 years

HSE Manager with international experience. Nebosh certificate.

My career objectives, strengths and experience in the workforce I am a skilled, experienced and respected heavy equipment mechanic with substantial experience onshore & offshore Australia and overseas particularly here in Asia.

Experience in Supply and Demand Planning, Customer Service, Logistics and Purchasing

Drilling Supervisor / Drilling Foreman / Comapany Man/ Drilling Engineer

Working in the North Sea in UK, Norwegian and Dutch sectors. Projects for Seafox 4,Sean P, Clipper, Britania,Transocean Leader, Transocean Winner, Deepsea Delta, Njord A, Troll A B C, Ocean Vanguard

Client Representative QC navaigation,

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out