Resume - petrololeum

Misco Jobs

Resume #87599

CONTACT INFORMATION:
View contact information...

British National

ANALYTICAL CHEMIST (Fuel Section) May 2007 to present
Intertek Laboratories at Sunbury Technology Centre (ITS)ENGLAND,part of Intertek(plc)group.

My role is to conduct routine analytical testing to a wide range of companies and industries. Performing both accredited and non-accredited analysis and helping our clients to solve their quality, process and related technical problems.

Duties involve;
* Conducting laboratory physical / chemical tests on crude oils, Residue & distillates, lube oil samples, fuel oils, kerosene oil etc, using standard test methods (ASTM/IP/BP) adopting wet chemistry techniques operating sophisticated, computerized Laboratory equipments such as NMR,Titrators,MCRT,CFPP,Pour,Cloud & Flash Point, viscosity etc.
* Participating in laboratory safety inspections as part of ongoing safety improvement culture.
* Conducting small-scale projects independently, reporting and assessing results of tests on behalf of tech specialists / consultants.
* Following up all instructions given by tech. specialists / Consultants and assisting in the day-to-day testing of Crude Oil Assays.
* Assisting in the installation and calibration of newly acquired lab. equipment.
* Maintaining all relevant files and records, good housekeeping of lab. equipment & premises and managing stock inventory of the Lab.
* Good understanding of LIMS for booking, entering /reporting of samples.

Summary of Previous Employment

PAKISTAN STATE OIL LTD (PSO) from Sept 2002 to 30th June 2004
Worked as a Quality Control Analyst in PSO central laboratory (Pakistan).
Duties involved;
Using modern analytical instruments like TBN, AA, CCS, FT-IR & Spectroil etc
General testing & Quality Control of
„« All kinds of Fuel Oil
„« Lube Oil / Base Oil
„« Chemical and Additives etc

* Maintaining quality management documents & records.
* Preparing samples for testing, writing reports for analysis as per GLP.
* QC testing of incoming products such as fuel oil / chemical tankers (ships)
* Generate and record QC technical reports for customers.
* Responsible for maintaining STOCK INVENTORY for the laboratory as per QMS.

ZAHABIYA CHEMICAL INDUSTRIES (Pakistan)
(From November 2000 to September 2002)
Worked as a QUALITY CONTROL OFFICER
Duties involved:
* Complete physical & chemical testing / inspection of incoming raw materials & outgoing finishing products.
* Maintaining & keeping all records of inspection & testing in accordance with ISO 9002 / HSE.
* Responsible for all laboratory testing, reports, documentations as per GLP.

Certificates of training courses:
* ISO 9001:2000 Environmental management system standards
(Five days exam based course)
* Environment and safety course modules
* Basic manual handling training course (DLC, Ergonomics)
* FT-IR spectrometer
* Rotary bomb oxidation (ASTM D2272)
* Water separatbility tester (ASTM 1401)
* Air release value (ASTM D3427)
* Cold cranking simulator (CCS 2100)
* Metrohm instrument 702 TBN apparatus
* Auditing to ISO 9000

Education
MSc PETROLEUM TECHNOLOGY with 1st division (August 2000)
BSc CHEMISTRY (June 1998)

SKILLS & STRENGTHS
* Excellent communication & management skills
* Can work under pressure environment with efficiency
* Good analytical approach working in petroleum lab.
* Good team player

COMPUTER LITERACY
* Word Processing
* Excel and PowerPoint literate
* Regular use of internet /e-mail & Outlook etc

MAIN INTERESTS
* Playing cricket
* Reading scientific books/articles
* Travel

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 10816)

Go to Search Parameters...

Brief Description

International logistics

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

Worked for several drilling companies, service and maintenance organizations during my career. Managed large numbers of personnel in most of these companies. Known for effective time and cost saving procedures. Excellent safety record, proficient in human relation skills, self-starter, task orientat

Extensive experience as a Project Manager with a focus on facilities design & construction, oil and gas regulations and environmental concerns. Responsible on all projects for design, material specs, P&ID ‘s and coordination of construction.

B. Tech in Metallurgical Engg, 27 years experience in Corrosion & Inspection function in refineries

With 20 years experience in all types of Construction especially in Oil & Gas.

Total of 27 years experience in Inspection, Quality Control and Non Destructive Testing of Pressure Vessels, Heat Exchangers, Piping and Structures for Petrochemical Plants, Power Plants, Rigs, Ships and Storage Tanks both at the time of fabrication and on-stream stage.

Senior Piping Designer with experience through both contract and direct work assignments, with major emphasis in the areas of Specialty Chemicals, Pharmaceuticals, Petrochemicals, Sulfur Recovery, Heavy Industry, Gas Turbine & Power Generation.

B.sc Petroleum Engineering, Model 204, SAS, Oracle, Oil and Gas Database Conversion, Production Engineering, Reservoir Engineering, Supported Petroleum Engineering application (Pipeflow, Pipesim)

Senior Petroleum Engineer with long experience in Oil & Gas Industry

Experienced LNG & Petrochemical plant commissioning and maintenance activities in Electrical field. Petrochemical and Utility plants instrumentation experience is an additional experience

I am a certified professional engineer with MBA and having 17 years of Contracts & Procurement experience in Oil & Gas and Powers sector.

Sr. Interpretation Geophysicist w/exploration & reservoir development experience

Instrumentation Engineer, Detailed Engineering for offshore, FPSO, oil/gas,steel plants

Over 25 years experience in the oil & gas and heavy engineering industries involving all contractual and commercial aspects of project controls works covering:- proposals management; contract preparation / tendering / administration; capital budget / forecast / cost control; and contractual claims.

Mech Engr with 22 yrs exp in power plant projects, working with Thermax Babcock & Wilcox Ltd.

Expert in Industrial Gas & oil separation plants (GOSP), Gas Terminals and Stations.

Significant record of managerial and administrative contracts experience in the petrochemical, power and telecommunications industries consisting of development, drafting, negotiation, execution, management and administration of contracts and licensed technology agreements.

MANAGEMENT Able to make sound prompt decisions encompasing a diversity of areas: From design and implementation through to resources and progress strategies.

Experience in reliabilty centered maintenance and Mechanical Integrity. Extensive experience with Project engineering.

17 years experience in procurement and supply chain management in Marine, gas, oil field. Post graduate in materials management from IIMM Bangalore India. Worked with majors viz. Halliburton Inc Houston TX, supreme food service AG Ziegelbruckestrasse, Switzerland , Dubai dry docks Dubai UAE

I introduce myself, i am an Electrical Engineer worked in IRAN under Hyundai Engineerung & construction co. for South pars Field Developement Phase 4 & 5 and before Phase 2 & 3 also.

I am wireline supervisor and consultant - I have a long experience

More than 30 years on operations,pre-commissioning and commissioning

at present working on cyberbase rig totally computerised

Experiences: Oil / Gas Field Facilities, Pipeline and Production Plant Operations, Commissioning and start up

Professional Drilling Consultant

Welding Suprintendent / Supervisor

PIPING DESIGN ENGINEERING

For the past 15 years I have been employed in petrochemical piping & Power Plant design & drafting utilizing Autocad, Microstation, 3D CADWORX, Plant 4D Programs and Field surveying using Total station and 3D Leica ScanStation 2, using Cyclone and CloudWorx programs to obtain as-builts of existing f

Studying M. Sc I Year (Environmental Science) in Distance Mode B. Sc Diploma in Occupational Safety Health and Environment ,First aid training

Free! An MBA graduate with 6 years of work experience in the oil and service-related industries. Experience in ESP, HPS, VSDs, PLCs, HMIs, and SCADA systems. Additionally, I have experience in project management.

Planning Engineer, Workshop Management, Maintenance and Material control, Safety Officer, AutoCAD, Fleet Management System Software(FMS),IVMS Download, Internet Skill, MS Word, Ms Excel, Corel Draw, Primavera Project Planner (P3), Ms Project, Power Point, Ms Dos, Publisher, Page Maker, Etc

9 years of rich work experience in Project Controls, Planning & Scheduling functions in the field of Oil & Gas, Petrochemical/Chemical Plants.

Having more than Twenty (20) years of experience in the field of Supervision and Inspection of Welding, Piping Fabrication and Installation in the Heavy Industrial construction such as Oil and Gas Plants, Power Generating Plants, Petro-Chemical and other Industrial Insta

Fifteen years of rich and cross cultural experience in Instrument Construction Supervision, Instrument Inspection, Commissioning and Troubleshooting Maintenance Work of all types of Instruments.

Radio Operator / AB Seaman

B. Sc. with Chemistry along with the 14.5 years of professional and project in petrolium refinery . Precommissioning & commission assistance in, LPG RECOVERY , ACID GAS REMOVAL , FUELGAS/NAPTHA RECOVERY

Free! All round drilling expertise from driller up to management. Managed on- and offshore drilling campaigns world-wide. Shell Round II. Currently head of drilling rig planning, acquisition and divestment for Shell Malaysia. Analytical and problem-solving capabilities. Broad engineering background.

Experienced Land/Right of Way Agent

petrololeum

Subsea systems (Controls, Trees and Wellheads). Service and Manufacturing of downhole drilling tools, BHA components, DD equipment & fabrication. Project team, QS, FAT, MC & ITP. Internal/external Audits, Procedural writing and MRB’s. ISO 9001:2008. UT, MP & UT Level 2.

self starter, great communication skills, great with microsoft programs, familiar with oilfield environment

13 years of experience in Engineering Projects & Maintenance, design engineering, construction and commissioning of instrumentation in petrochemical and chemical industries involving detailed engineering including, project estimation, preparation of instrument specification, comparison statement ,pr

18 years petrochemical experience, senior engineer

10 Year experience in FEED & Detail engineering of Electrical System in Oil & Gas, onshore Plat-form, Petrochemical Plant, Automobile sector and Pharmaceutical Industries

HSE Executive

Numerical Simulation (Eclipse/Petrel RE), Analytical tools(PROSPER/MBAL), Well testing, reserves estimation, material balance,decline curve analysis, production testing

10 yrs in safety management

Chemical Laboratory Analyst / Chemical Process Technician.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out