Resume - Process/Operations Engineer, with four years of Refinery (FCC) experience.

Misco Jobs

Resume #87659

CONTACT INFORMATION:
View contact information...

JOB OBJECTIVE: Middle level positions in Process Engineering, Technical Services/Operations.

PROFESSIONAL PROFILE

Technically accomplished & competent professional chemical engineer with 4 years of rich experience in Process Engineering, Commissioning, Operations, Stabilizing & HSE in refinery.
1. ESSAR OIL LTD- FCCU (May 2005 to May 2008)
* Joined as Graduate Engineering Trainee (Through Campus Interview) in May 2005 in Essar oil LTD's 10.5 MMTPA grass root refinery, Jamnagar, Gujarat, India.
* Promoted to positions of progressively higher responsibilities, based on sheer hard work, dedication and excellent performance.
* Has been the core member of the team which commissioned the FCC Unit.(S.S&W)
* Worked as Process/Commissioning /Panel Engineer.

2. HPCL-MITTAL ENERGY LTD- FCC & VGO HDT (June 2008- Till Date)
* HPCL-MITTAL Energy LTD is joint venture Company of HPCL & Mittal Energy LTD, involved in the setting up of 9 MMTPA refinery, Punjab, India.
* Working as Asst.Manager-Process for DCC & PRU (S.S&W) and VGO Hydrotreater (Axens).
* Responsibilities include review of Design packages, hydraulics checking, HAZOP, 3D model Review, technical analysis of vendor details for the equipments involved in the DCC unit.
* Preparation of strategies for startup and commissioning of the unit. Currently involved in DCS/OTS/APC development of the process units (DCC, VGO HDT, etc) along with Yokogawa.
CURRENT RESPONSIBILITIES
* As a Process Engineer, involved in process/project activities in co-ordination PMC/EPC/Vendors.
* Technical analysis of vendor documents before an order is placed for a particular equipment..
* Developing training modules (Operator Training Simulators) for operators for commissioning/operations.
* Carrying out hydraulic checking & calculations of the process equipments/lines.
* Relief load calculation and checking.

PROFESSIONAL EXPERIENCE/SKILLS
Process Engineering/ Technical Services

„« Experienced in Microsoft VISIO 2003 for preparing PFD & P&ID.
„« Knowledge of HYSYS 3.1, for process simulations.
„« Has co-ordinated PCS, Houston for the test run of RFCC unit, ESSAR OIL REFINERY.
„« Identification of hindrances in the process unit towards debottlenecking.
„« Calculation of HEAT BALANCE for FCCU & hence calculating the catalyst circulation rate, cat/oil ratio, coke on catalyst, etc.
„« Calculation of sulphur balance, Fuel Gas molecular weight, column tray hydraulics, etc.
„« Preparation of daily performance summaries to monitor plant by studying laboratory test reports, standard log sheets and other daily operating activity reports, and highlight abnormalities and suggest corrective actions to supervisor.
„« Close coordination with other engineering disciplines (mechanical, process control, rotating equipment and metallurgy etc.) for any process revamp and modifications.
„« To prepare pre-commissioning and post commissioning HAZOP study of process plants or any modification being carried out in running unit.
Commissioning Experience

„« Member of team that successfully commissioned Fluid Catalytic Cracking and Unsaturated Gas Unit, Essar Oil Refinery.
„« Started commissioning activities right from scratch; inclusive of study of process packages, BDEP review, Operating Manual review, process logic checking, Cause & Effect Charts, Logic Diagrams, DCS Configurations, ESD system functional specifications etc, for FCC/UGS unit.
„« Along with the vendor from MAN Turbo, Germany, has done the process logic checking, ESD, solo run, Surge test & start-up of Main Air Blower driven by condensing type turbine and Wet Gas Compressor, driven by back pressure turbine.
„« Preparation of fall back strategies for Compressors along with the vendor from CCC (Compressor Control Corporation of India) and has done the surge test.
„« Along with the licensor from ZEECO, UK, has involved in the finalization of logics for CO-Oxidiser & Waste Heat Boiler.
DCS PANEL Operation Experience

„« Has done start-up, shut down of FCC unit at the level of Panel Officer. (9 start-up & 8 shutdowns of FCC unit).
„« Has handled emergency situation as panel officer such as HP steam failure, WGC trip, MAB trip, etc.
„« Preparation of Start-up & Trip related Graphic pages for DCS in Microsoft Visio and involved in implementation of the same.
„« Has the ability to study the logic pages and comparing the same with Cause & effect drawings and control narrative.
„« Preparation of SOP, logic reports and conducting class room sessions for the operation staffs.
„« Has played an efficient role at the level of panel officer in the logic checking, dry-out and commissioning of all fired heaters (FEED HEATER, DIRECT FIRED AIR HEATER & CO_OXIDISER) & reactor regenerator in the FCC unit.
TRAININGS, ACADEMIC CREDENTIALS & PERSONAL DETAILS

TRAININGS & ACADEMIC CREDENTIALS
„« Has participated in DCC unit HAZOP and contributed towards the modifications required for safe and smooth operation of the unit.
„« Has got appreciation letter from head of the refinery for my performance, stating, "Performance Significantly Exceeds Expectations", continuously for two financial years namely 2006-07 & 2007-08.
„« Undergone 45 days training in "REFINING TECHNOLOGIES" at Indian Institute of Petroleum, Dehradun.

„« Undergone 2 month training in Hydro cracker unit at Mangalore Refinery & Petrochemicals Ltd, Mangalore.(MRPL)

„« ABB simulation & Panel operation training.

„« Participated in 3 day program on FCC SIM, simulation Package for FCC provided by KBC, USA.

„« Has participated in the 38th FCC Activity Committee meeting conducted by Centre For High Technology- India.

„« Participated in 2 day seminar conducted by AXENS in New Delhi.

„« Has undergone two day training program on THE SEVEN HABITS OF HIGHLY EFFECTIVE PEOPLE by FRANKLIN COVEY.

EDUCATION
„« B.Tech (Chemical Engineering), from St.Josephs College of Engineering, Anna University in 2005, Chennai, first class with Distinction (83.25%).
„« PG Diploma in Petrochemicals & Refining, Cheminformatics institute of India 2006, first class (68.5%).
„« H.S.C. (10+2) from N.S.N Matriculation higher Secondary school (Chennai) in 2001. Secured 90.25% marks.
„« Emerged out has the best outgoing student in school and college.
„« Has been the Tamil Nadu state Leader for Bharath Scouts Troop during schooling.

PERSONAL STRENGTH & DETAILS
„« Ability to adapt quickly.
„« Quality oriented, Goal oriented and a perfectionist
„« Excellent Leadership qualities and communication Skills
„« Date of Birth: 16th October 1983
„« Marital status: Married

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8651 to 8700 of 10910)

Go to Search Parameters...

Brief Description

Wimax Engineer-Alcatel Lucent, ZTE

Lead Auditor in ISO 9001, 14001 and 18001 by IRCA

Experienced procurement professional skilled in managing material and equipment needs for $6-8 million dollar construction projects, controlling inventory, overseeing operation of distribution centres, and maintaining and scheduling a fleet of construction vehicles.

With a Petroleum Engineering degree and more than 12 years experience in E&P industry

Experienced Safety Professional

SPCC,AUTOCAD,GIS,MICROSOFT OFFICE,FRENCH,AIR POLLUTION MONITORING,ORGANIZED,TEAM PLAYER,QUICK LEARNER.

Senior Project Site Manager HVAC - FIRE PEOTECTION - PLUMBING - SPECIAL FITTINGS

Knowledge in operating the electrical equipments

Office Automation, Server Support, IT Helpdesk, IT Setup

Diploma Chemical Engineer with 13 years of experience in Petrochemicals(Ethylene/propylene/Ethane/Propane/Gasoline),Gas(LNG,Natural Gas, Refrigerant),Wiped Film Evaporator, Filter, Filter-Dryer etc

I have 3-years diploma of Associate Engineering in "Electrical Trade. Presently "FRIENDSHIP TEXTILE MILLS (PVT) LTD" Kaachi-Pakistan, doing work as Sr-Executive Officer in power generation department

Technical Author, Trainer, Project Manager

I am an engineering specialist having more than 19 years of experience, graduated from M.I.T, the most reputed Institute in India for Instrumentation. At present I am working as the Associate General Manager (Projects) for one of the leading Zinc producer in the world.

Rigger Certificate, Crane Certificate - experience in handling crane

class A cdl, Can lift 80 pounds or better. fast learner

Mechanical Engineer - Fresher

As Mechanical/Piping Engineer with over 5 years of experience (India and abroad) in equipment erections, plant maintenance Including piping fabrication, erections, planning and pressure testing of complex piping systems, unit-piping as per ASME and API standard. Well conversant with P&ID, isometric/

Computer skills

supervision and inspection of piping jobs,review and acceptance of test packages, punch listing and other construction activities

I am working in Kuwait since 1995 in the five star hotel as a time keeper. I am high school level.

High potential, ready for work, field or office type, famiiar to petroleum softwares.

Control loops configuration and development of advanced control process schemes Physicochemical Water Treatment Plant Management Coordination of P&ID’s and PFD’s diagrams, experience with FCC, Oxygenate, Vacuum, BTX,etc

A safety practitioner ambitious to provide a meaningful contribution in the field of Occupational Safety, Health and Environment using acquired knowledge and skills.

I have done B.Sc. (physics,chenistry,mathematics)from HNBGU srinagar.i have done BCA from IGNOU. and now i m pursuing M.Sc. physics and also pursuing MCA from IGNOU.

i am hard working and innovative,a very effective team player with creativity and innovation as my watch word. i am also computer literate,proficient with the microsoft office. and very willing to undergo training for career development.

Almost 3 years post graduate experience in the Oil and Gas industry, working for chartership with in 3-4 years with excellent interpersonal skills, effective communicator of ideas, enjoys working as part of a team to achieve specific goals, enthusiastic and reliable.

Office Manager with over 5 years experience

Field professional skilled in management, operations, maintenance, safety. Seeking an international and/or domestic leadership assignment with a company who may challenge my abilities and use my versatile background and experience.

Power electronic and its applications. Industrial electricity. Programmable logic controllors (PLC):Allen-Bradley and Omron SCADA INTOUCH CAD software,AutoCAD Hydraulic and pneumatic controls installation of control system

I am entry level

Experenced equipment mechanic currenty working for a Caterpillar dealer

Process/Operations Engineer, with four years of Refinery (FCC) experience.

Broad experience of oilfield infrastructure, water,sewage treatment , gas turbine stations, oil pipelines, rig sites, industrial building, housing, earthworks, rail & general civil, mechanical & electrical works in UK, Africa & Asia. Project and Site Management in a variety of challenging locations

Engineering/Project Manager skilled in organizational/project management/business development. Highly skilled in client relations/development. Diverse experience in environmental consulting/nuclear power/regulatory compliance/facilities/systems engineering/infrastructure projects.

Bachelor of Engineering(first grade with distinction) in instrumentation.

Retired from PAF as “Chief Technician”

Certified Welder, Forklift/Crane Operator

Laboratory Techniques, computing skill, creativity, communication skill.....

manager

Field jobs and experiences in Joint Investigation Visits (JIV), EIA, to both onshore and offshore locations.

PIPING PDS DESIGNER

Aviation expert with 21 years in the maintenace arena. Track record of increasing productivity, improving quality while reducing cost and meeting customer needs. Skilled in scheduling, supervising &evaluating over 50 personnel. Successful in developing & executing operational policies and procedures

Telecom Field Engineer :- Having experience in telecom planning, field survey, telecom construction, testing, and maintenance of Telecom field & quality assurance. Installtion & testing of telecom equipment & networks.

Experience of more than 11 years in the sector of Oil and Gas , Petrochemical , Ship Building, High Rise buildings and expertise on planning and scheduling with prima vera soft ware , keeping track of records with prima vera expedition , involved in tender level programming as well as master level

AutoCAD MEP 2009; Revit MEP 2008, Civil Survey CAD programs

Planning, project engineering/management of Petrochemical/Oil and Gas plants with around 28 years experience with design and engineering consultants, EPC contracting companies and oil producing companies. Associated with planning and control of projects with international companies like Shell etc.

In well services Egypt co (Sperry sun drilling services),I was working as Directional survey engineer(magnetic single shot and magnetic multi shot).

Professional in Quality and HSE

Thirty Eight years in Material Handling, Purchasing, Logistics, Expediting and Management with a record of Reliability and Progressive Advancement. I have handled the entire Purchasing Process for as many as twenty projects at any given time involving m

Heavy equipment operator

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 [ 174 ] 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out