Resume - Fifteen years of rich and cross cultural experience in Instrument Construction S...

Misco Jobs

Resume #87763

CONTACT INFORMATION:
View contact information...

INSTRUMENT COMMISSIONING SUPERVISOR

PERSONAL DATA:

Date of Birth: November 30, 1969
Civil Status: Married
Citizenship: Filipino

EDUCATIONAL BACKGROUND:

Computer Literate Program
September 22, 1989
(graduate)
SUMMARY OF JOB DESCRIPTION:

Fifteen years of rich and cross cultural experience in Instrument Construction Supervision, Instrument Inspection, Commissioning and Troubleshooting Maintenance Work of all types of Instruments.

* Hands on experience in construction, Inspection and commissioning activities at Oil and Gas Project (Petrochemical Plants, Refineries, Gas Exporting Upstream Projects, Tank Farm and Sulphur Recovery Units and upgrading the projects).
*
* Working as a Commissioning Instrument Supervisor for Upstream and Down Stream Compression Facilities Project / Utility Area/ Export Gas Compressor Units /Acid Gas Removal Unit /Slug Catcher Unit and Stream 1 & 2 Process Unit / Chemical Loading Area and testing Commissioning activities.

* Distribution of jobs to the Instrument Foreman/Technicians/Monitoring the Progress and Coordination with the Commissioning Crew's and Loop
Checking Crew's.

* Performing all duties related to Instrument Inspection, QA/QC procedure. Punch list Inspection

* Coordinated with the Client's and Vendors of the Project.

* Prepared Work Permit for the task.

* Commissioning activities handling for Calibration/Loop checking and Start-up and Shut-down of all kinds of Instrument.

* Supervision and checking the workmanship of technician and skilled craftsman to conform with codes and standards such as calibration, installation loop checking, pre-commissioning and commissioning of process control instruments (pneumatic, hydraulics, electronics) such as Foxboro, Masoneilan, Bentley Nevada and others.
* Carry out corrective and preventive maintenance of instruments and controls for Oil and Gas Well, Fire and Gas Detection System, Air Compressor System, Chemical Injection, dew point Analyzer, Computer Assisted Operation CAO, Glycol Regeneration System, Hydraulic Control for Wellhead and potable Water Generator, Export Gas Compressor EGC.
* Assist operation Personnel during plant shutdown and start-up of Oil and Gas Platform.
* Survey existing installation for revision and expansion, prepares bill of materials and estimated man hours required for minor projects and submit recommendations as required.
* Routine check and corrective work on DCS, ICSS, ESD, SCADA, F&G, GAS turbine driven main power generator, turbo expanders, recycle gas compressor, wellhead control panels and telemetry system.
* Carries out open pre-commissioning loop checked from distributed control system "DCS" (Centrum Yokogawa) to final element and understand commanding DCS.
* Assisted ASD/ESD vendors (Triconex) and understand function to the system.
* Carry out calibration check of all Rosemount transmitters (Level, Pressure, Flow and Temperature) and configuration on line "DCS" using Smart family interface (275,268,375 Hart communicator protocol).
* Lay-out and installation of process tubing from instrument panel thru different kinds of instrument in field.
* Line checking and termination of control cable of an instrument using millimeters tester.
* Basic skills developing of plant instrumentation standard, Impulse Lines, Calibration, Trouble shooting, routine preventive and corrective maintenance, co-ordinate with mechanical electrical process technician and instrument engineer in order to maintain optimum plant operability, personal safety, participate in stand by duty to maintain 24-hours coverage with maintenance personal for the assigned operation facilities.

AS PROCESS LEAD TECHNICIAN

* Crew consisting of production personnel are to carry out operation on offshore installation as directed by area supervisor.
* Posses good experience of working on F&G Instrument like IR/ UV Flame detector, Line of Sight Gas Detector, Point of Gas Detector, Manual Calls Points and Sounders etc..
* Well versed to calibrate & configured the Smart series Instruments with Hands held Communicator.
* Participation in up gradation during shutdown.
* Instrument and Corrective maintenance.
* The following task which are to carried out on a routine basis:

„« DAILY / EACH VISIT
* check radio is functioning accordingly
* Check station pressure are control system functioning accordingly.
* Check for leaks:
1. well head
2. flow lines
3. headers
4. vessels & process line
5. chemical / injection facilities and lines
* Check all the flowing wells are flowing.
* Check all the valves out going and incoming in riser are open.
* Check that lighting is functioning and wind sock condition.
* Check control -0- mantic units/well control module.
* Change charts on controller/recorder. Ensure inking properly.
* Well testing and changing of bean as per program issued.
* Run sum pump and take sample as required.
* Ensure pressure are recorder as per programming required.
* Visits jackets and satellite platform and carry out of the relevant items.
* Carry out general housekeeping to maintain that platform in a clean and
* orderly manner.
* Lay-out and installation of signal line, flow lines on instruments thru
* Christmas tree.

„« WEEKLY
* Drain test separator and strainer to prevent sand and debris accumulation.
* Check gas scrubber draining.
* Pump sump and service the pump when necessary.
* Record catholic protection rectifier reading.

„« MONTHLY
* Measure and record CHP of all wells
* Beans stock check
* Carry out test separator leak check
* Test station shutdown system and tripping each item in turn
* Services crude oil transfer pump test jacket safety shutdown devices
* Zero check D.P. cells
* Test for wire cutting effectiveness of SSV's with baker WC and HWC
actuators.
* Leak testing of SCSSV's (on in every 3 months)

WORK EXPERIENCE:

Name of Company: CHIYODA TECHNIP JOINT VENTURE
Address: Ras Gas, Ras Laffan Industrial City
Position: Instrument Supervisor
Date Employed: Nov. 06, 2008 up to Oct. 08, 2009

Name of Company: KENTZ, RUSSIA L.L.C.
Address: Sakhalin, Russia
Position: Instrument Supervisor
Date Employed: May 21,2008 to August 31,2008

Name of Company: JGC ME FZE
Address: Ras Laffan, Doha Qatar
Position: Instrument Supervisor
Date Employed: April 25, 2007 up to March 30, 2008

Name of Company: BECHTEL
Address: Tengiz, Kazakhstan
Position: Instrument Supervisor
Date Employed: June 20, 2006 to November 21, 2006

Name of Company: WIZ WINNER ENGINEERINGS &
CONSTRUCTION SERVICES
Procter & Gamble Philippines Inc.
Address: Cabuyao, Laguna
Position: Instrument Supervisor
Date Employed: February 24, 2005 to January 20, 2006

Name of Company: TSKJ Nigeria Ltd.
Address: Bonny Island ¡V River State, Nigeria
Position: Instrument Supervisor
Date Employed: August 1, 2004 to February 14, 2005

Name of Company: JGC / KBR
Address: Algeria
Position: Instrument Supervisor
Date Employed: September 18, 2003 to April 29, 2004

Name of Company: TSKJ Nigeria Ltd.
Address: Bonny Island
Position: Instrument Supervisor
Date Employed: July 29, 2002 to June 11, 2003

Name of Company: FLUOR DANIEL PACIFIC, INC.
Address: Cabuyao, Laguna
Position: Instrument Supervisor
Date Employed: May 03, 1999 to July 31, 2000

Name of Company: MIESCOR
Address: Sta. Rita, Batangas City
Position: Senior Instrument Technician
Date Employed: July 18, 1997 to March 5, 1998

Name of Company: DAEWOO HEAVY MACHINERY LTD.
ONGC-SHW Platform Offshore Project
Address: South Bombay India
Position: Senior Instrument Technician
Date Employed: October 1994 to November 1994

Name of Company: KAWASAKI /AG&P CORPORATION
Address: Bauan, Batangas
Position: Senior Instrument Technician
Date Employed: April 18, 1994

Name of Company: DAEWOO HEAVY MACHINERY LTD.
ONGC-SHW Platform Offshore Project
Address: South Bombay India
Position: Senior Instrument Technician
Date Employed: December 1993 to February 1994

Name of Company: S.A. KENTS/S.D.M.C.
Address: Jubail, Kingdom of Saudi Arabia
Position: Senior Instrument Technician
Date Employed: September 26, 1991 to April 29, 1993

Name of Company: BROWN & ROOT
Address: Manama Bahrain
Position: Instrument Technician
Date Employed: February 18, 1991 to July 26, 1991

Name of Company: BROWN & ROOT
Address: Abu Dhabi U.A.E.
Position: Instrument Technician
Date Employed: March 05, 1990 to June 15, 1990

Name of Company: BROWN & ROOT
Address: Manama Bahrain
Position: Instrument Technician
Date Employed: January 29, 1989 to April 14, 1989

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 10902)

Go to Search Parameters...

Brief Description

I am a HVAC /Electrical Lead technician with 22years experience 19 years in Multi-national oil companies both onshore and offshore for production platforms and perform preventive maintenance activities, job scheduling including preparation of JSA with relevant parties .

Electrical Engineer

Workover/Completion Consultant/Supervisor

Production foreman with twenty years of experience in oil and gas industry.

Occupational Health and Safety Engineer with Industrial Hygiene Background. Worked on Variety of Oil & Gas Project

Working with Multinational Oil Company HALLIBURTON WORLD WIDE LTD, in Pakistan as a Senior Service Leader.

Accomplished Engineer With 14 Years Of Diverse Experience In Production, Planning, Materials Management

Equipment handled are : Feed Treating, Reforming, Purification, Synthesis Gas Loop, Ammonia Refrigerant System.

I am a fully qualified Cost Engineer and Estimator and have contract claims experience. Please see resume for details.

Senior Executive with verifiable performance in the fields of Project / Operations Management and Techno-Commercial management in Shipyards and Oil & Gas industry.

Two Masters Degrees in Hydro-Geology and Geology from the top ranking university in India. Over 17 years of GIS and AM/FM/GIS working experience with leading companies in Asia and Middle East. Involve in large-scale projects with major clients across the Globe implementing GIS and AM/FM/GIS project

International logistics

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

Worked for several drilling companies, service and maintenance organizations during my career. Managed large numbers of personnel in most of these companies. Known for effective time and cost saving procedures. Excellent safety record, proficient in human relation skills, self-starter, task orientat

Extensive experience as a Project Manager with a focus on facilities design & construction, oil and gas regulations and environmental concerns. Responsible on all projects for design, material specs, P&ID ‘s and coordination of construction.

B. Tech in Metallurgical Engg, 27 years experience in Corrosion & Inspection function in refineries

With 20 years experience in all types of Construction especially in Oil & Gas.

Total of 27 years experience in Inspection, Quality Control and Non Destructive Testing of Pressure Vessels, Heat Exchangers, Piping and Structures for Petrochemical Plants, Power Plants, Rigs, Ships and Storage Tanks both at the time of fabrication and on-stream stage.

Senior Piping Designer with experience through both contract and direct work assignments, with major emphasis in the areas of Specialty Chemicals, Pharmaceuticals, Petrochemicals, Sulfur Recovery, Heavy Industry, Gas Turbine & Power Generation.

B.sc Petroleum Engineering, Model 204, SAS, Oracle, Oil and Gas Database Conversion, Production Engineering, Reservoir Engineering, Supported Petroleum Engineering application (Pipeflow, Pipesim)

Senior Petroleum Engineer with long experience in Oil & Gas Industry

Experienced LNG & Petrochemical plant commissioning and maintenance activities in Electrical field. Petrochemical and Utility plants instrumentation experience is an additional experience

I am a certified professional engineer with MBA and having 17 years of Contracts & Procurement experience in Oil & Gas and Powers sector.

Sr. Interpretation Geophysicist w/exploration & reservoir development experience

Instrumentation Engineer, Detailed Engineering for offshore, FPSO, oil/gas,steel plants

Over 25 years experience in the oil & gas and heavy engineering industries involving all contractual and commercial aspects of project controls works covering:- proposals management; contract preparation / tendering / administration; capital budget / forecast / cost control; and contractual claims.

Mech Engr with 22 yrs exp in power plant projects, working with Thermax Babcock & Wilcox Ltd.

Expert in Industrial Gas & oil separation plants (GOSP), Gas Terminals and Stations.

Significant record of managerial and administrative contracts experience in the petrochemical, power and telecommunications industries consisting of development, drafting, negotiation, execution, management and administration of contracts and licensed technology agreements.

MANAGEMENT Able to make sound prompt decisions encompasing a diversity of areas: From design and implementation through to resources and progress strategies.

Experience in reliabilty centered maintenance and Mechanical Integrity. Extensive experience with Project engineering.

17 years experience in procurement and supply chain management in Marine, gas, oil field. Post graduate in materials management from IIMM Bangalore India. Worked with majors viz. Halliburton Inc Houston TX, supreme food service AG Ziegelbruckestrasse, Switzerland , Dubai dry docks Dubai UAE

I introduce myself, i am an Electrical Engineer worked in IRAN under Hyundai Engineerung & construction co. for South pars Field Developement Phase 4 & 5 and before Phase 2 & 3 also.

I am wireline supervisor and consultant - I have a long experience

More than 30 years on operations,pre-commissioning and commissioning

at present working on cyberbase rig totally computerised

Experiences: Oil / Gas Field Facilities, Pipeline and Production Plant Operations, Commissioning and start up

Professional Drilling Consultant

Welding Suprintendent / Supervisor

PIPING DESIGN ENGINEERING

For the past 15 years I have been employed in petrochemical piping & Power Plant design & drafting utilizing Autocad, Microstation, 3D CADWORX, Plant 4D Programs and Field surveying using Total station and 3D Leica ScanStation 2, using Cyclone and CloudWorx programs to obtain as-builts of existing f

Studying M. Sc I Year (Environmental Science) in Distance Mode B. Sc Diploma in Occupational Safety Health and Environment ,First aid training

Free! An MBA graduate with 6 years of work experience in the oil and service-related industries. Experience in ESP, HPS, VSDs, PLCs, HMIs, and SCADA systems. Additionally, I have experience in project management.

Planning Engineer, Workshop Management, Maintenance and Material control, Safety Officer, AutoCAD, Fleet Management System Software(FMS),IVMS Download, Internet Skill, MS Word, Ms Excel, Corel Draw, Primavera Project Planner (P3), Ms Project, Power Point, Ms Dos, Publisher, Page Maker, Etc

9 years of rich work experience in Project Controls, Planning & Scheduling functions in the field of Oil & Gas, Petrochemical/Chemical Plants.

Having more than Twenty (20) years of experience in the field of Supervision and Inspection of Welding, Piping Fabrication and Installation in the Heavy Industrial construction such as Oil and Gas Plants, Power Generating Plants, Petro-Chemical and other Industrial Insta

Fifteen years of rich and cross cultural experience in Instrument Construction Supervision, Instrument Inspection, Commissioning and Troubleshooting Maintenance Work of all types of Instruments.

Radio Operator / AB Seaman

B. Sc. with Chemistry along with the 14.5 years of professional and project in petrolium refinery . Precommissioning & commission assistance in, LPG RECOVERY , ACID GAS REMOVAL , FUELGAS/NAPTHA RECOVERY

Free! All round drilling expertise from driller up to management. Managed on- and offshore drilling campaigns world-wide. Shell Round II. Currently head of drilling rig planning, acquisition and divestment for Shell Malaysia. Analytical and problem-solving capabilities. Broad engineering background.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out