Resume - A Safety Professional with a enthusiastic approach to Safety & Environmental iss...

Misco Jobs

Resume #87764

CONTACT INFORMATION:
View contact information...

March--2009---October--2009

Statoil GJOA Project Norway.

CONOCO PHILIPS Project Viking Norway

Castoro Sei Pipe laying semi submergible barge.

Details as below---More to follow as project progresses

October-2008—March-2009

Castoro Sei Pipe laying semi submergible barge

Off the coast of Spain—Ibiza-- Mallorca

Employed by Saipem for the Enagas project to construct and lay pipeline onto the sea bed from the mainland of Spain to hook up with Ibiza then to connect up with Mallorca. Duties to include, but not restricted to are Keeping a high visible profile while observing general day to day duties of the workforce. To liaise with Managers,
Superintendents and supervisors to ensure that the Company's HSE Procedures and Policies are implemented and worked to. To ensure personal follow the TBT, JSA's

May 2008--- October 2008

SAIPEM 7000 Deepwater J-Lay System
Frigg field contract------Then onto MEDGAZ project
Construction Safety Officer

Employed by SIAPEM as CSO on the maintenance of the 7000 J-Lay Tower and
A-Frame. Work carried out on the CASTORO X1 and the S42 Barges, berthed at
Schiedam Dock's Holland. I was responsible for the day to day Safety Issues as well as preparing The J.S.A. P.T.W. T.B.T. also Liaise with Project Superintendent, Supervisor's, to identify H.S.E. trends and issues in order to eliminate any potential Hazards. Create a good working Interaction with Saipem personnel, Contractors and Sub contractors working on the project. Maintaining a high level of visibility throughout the contract.
Have now joined The FAR SOVEREIGN as part of the Frigg contract, removing old pipe work from North Sea seabed. Then started MEDGAZ Project, in the Mediterranean. Observing the work being carried out by Saipem and Subcontractors, Personnel in performing there duties during the Mobilization and Demobilization, of the Project in Spain and Italy, also insuring that Saipem Procedures are followed to ensure a Safe Working Atmosphere amongst the Workforce.

March 2008—April 2008 (relief)

EXXON / MOBIL. SAIPEM

HSE Advisor

Employed by CTC Marine (offshore) on the Maersk Advancer (Sub-sea Utilities) off the Italian coast.
Daily Management Safety Meetings, Interaction with Sub Contractor Management in order to audit and evaluate Safety Systems of each Contractor
Safety Inspection and Reports, liaising with Client, Offshore manager and Supervisors.
Responsible for Risk assessments pertaining to the Permit to work systems and on site auditing of Permits to ensure all HAZIDs are correct and adherence to the Safety measures in place
Also responsible for Incident investigation and reporting where required.
Liaise with offshore manager to identify trending of HSE issue's and introduce and maintain a training matrix to reflect trends and eliminate potential hazards

April 2007- Oct 2007

Exxon / Mobil Limited Luanda spoolbase Angola

HSE Advisor

I was part of the Luanda Spoolbase HSE team for the construction of the Spoolbase and production of associated pipe stalks relating to the Saxi Batuque offshore project Angola.
I was responsible for but not limited to the day to day safety issues on the Spoolbase, weekly safety meetings, daily production meetings, toolbox talks, accident and incident investigations, Risk assessments, inductions and statistical collation and reports and maintaining a high visibility on site.

June 2006–Jan 2007 McNulty Offshore Const.
Maersk Oil Global Producer III
HSE Advisor

Employed as part of the Project Management team during the refurbishment and conversion of this FPSO. I was responsible for the day to day Safety issues, attendance of weekly client contractor safety meetings. Management inspections, Safety Audits, and Permit Audits, incident investigation and analysis and sub-contractor audits and evaluations, risk assessments, accident / Incident investigations and reports and maintaining high visibility presence on site throughout the contract. Also responsible for the co-ordination of training & induction of the workforce of 1100 on site personnel

2006-2006

GNM (Bio Fuels)

HSE Advisor

Employed to assist the companies HSE Manager in his duties on the Bio Fuels site duties which included helping with inductions, safety audits, and inspections, accident and incident investigation and reporting statistical collating and report writing and chairing weekly meetings with members of the management team and sub contractors.

2004-2005

C.B.M.S (Turks and Cacaos Islands

Site Manager

To ensure the erection of the cement batch plant, loading areas, access and egress, runs to schedule to maintain all staff and visitors comply with site safety procedures. Order and check materials delivered to site.

2004-2004

TRINITY ENG

Safety Advisor

I was employed to work alongside the platers and welders as a Safety Advisor to monitor day to day duties of fabricating, erecting and dismantling old work stations, replacing with new steelwork. I was also tasked to carry out Risk assessments, accident incident investigations and reporting, weekly HSE meetings, Audits and Inspections.

2002-2004

ERS SCAFFOLDING LTD

Safety Advisor

Working for a scaffolding company within the oil and gas Industry I was charged with the day to day health and safety of all employees which included but was not limited to Working at height training, Audits and inspections, Accident and incident investigation and reporting, weekly and monthly meetings and statistical collation and reporting.

2001-2002

PIRELLI CONSTRUCTION

Safety Advisor

I worked as a safety advisor on several construction projects and was in shared control of the health and safety on these projects which included but was not limited to accident and incident investigation and reporting, audits and inspections, toolbox talks, weekly and monthly safety meetings and statistical information collating and reporting.

1999-2001

UK CONST LTD

Pipe Fitters Mate (safety rep)
Working with pipe fitters-welders in all aspects of prepping steelwork ready for erection on various sites in England and Wales. Assisting in the stores where required. Liaise between Management and Personnel on Safety issues

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5501 to 5550 of 10917)

Go to Search Parameters...

Brief Description

Marine Electrical with electronics & Automation Exp. (off - shore, Oil Rig, FPSO, Drill Ship, OSV) 21 years exp.

Over twenty-six years experience in the Oil Industry. The last sixteen years involved in pre-commissioning, commissioning, startup, and continuous operation

Journeyman Pipefitter, Journeyman Gasfitter (Class GB-00018470), Journeyman Plumber - Red Seal (IP #M-16-00616) Since starting my apprenticeship in 1988, I have gained experience in many aspects of the mechanical trade, such as construction, shut-downs, and maintenance...

Am a fresh directional driller with background in well planning and borehole survey, i have ten years experience in various drilling position.

Automation engineering experience in oil and gas sector. Programming experience Hardware and software knowledge

Chemical Engineer with 11 years Experience in Process Engineering, Production in chemical industry

Job Objective To pursue a career with a major international industry. The position should offer career opportunities, expansion of knowledge and an immediate challenge

My qualifications are reinforced by over 20 years of Industrial Insulation as a front line supervisor. Multi-tasking for the past 5 years as a Painting Supervisor as well as Insulation Supervisor, has expanded my talents to a broader range that may well serve you better.

Engineering, cadd designer, autocad, microstation

Industrial Engineer, with more than 9 years Experience in Planning and Cost, in EPC and developmental projects, both onshore and offshore. Worked in Oil,Gas,Petroleum and Automotive field.

13 years Completion/Workover experience. Completion, sand control, fracturing, matrix acidizing design. Extensive project management experience including three assignments in operator's offices. Operations and engineering management experience.

Hands on experience in Vibration Monitoring & Analysis of Plant Rotating equipment by the use of SKF Microlog 60 with SKF Prism4 1.35 & SKF Machine Analyst 2.2 vibration analysis and data management software. Familiarity with the data base creation, modification and report preparation using SKF MA

i m the student of BS GEOLOGY 7TH semester nd looking for job.

More than 8 years HSE experience.

1yr Apprenticeship in BHEL,Trichy

A focused team oriented Petroleum Technologist who brings with a varied work experience in production line and Electrical and Electronics troubleshooting able to work in ambiguous and demanding situations with positive results.

marine engineering steam ship,maintenance fitter,malaysia maritime academy

Good communication skills; Microsoft and Programming skills; B.Eng in Mechanical Engineering.

Electrical and electronics engineering

Working knowledge of PLC's

A Safety Professional with a enthusiastic approach to Safety & Environmental issues, excellent communication skills, able to plan & prioritise busy management schedules while ensuring high visibility and involvement

I am a skilled solid tradesman with a solid family looking for interesting ,rewarding employment.

I am a B.Tech. (Applied Petroleum Engineering) from University of Petroleum and Energy Studies, Dehradun (India). Though I am not experienced but i have certain skills like I work well as part of a team andI find it easy to get on with people.

Senior Weld Mgr / Engineer. I have for decades specialized in providing management support for the implementation of Best Weld Practices and the establishment of Weld Process Controls. I

Proven record of growth and success building businesses from start-up to profitable operations in highly competitive environments. Very skilled at identifying market opportunities and creating strategies to effectively exploit them. Proven success record setting strategic direction, executing to pl

POSITIVE ATTITUDED, HARD WORKING

I have a post graduate degree in Petroleum and Gas Engineering; while preparing my thesis based on secondary oil recovery (Niger Delta),I work in collaboration with SPDC Nigeria. They provided me with data.I have skills also in drilling Engineering in areas of casing design and mud Engineering.

Electrical Engineer with experience in Engineering,Procurement and Construction

Experience in Mound storage pressure vessel construction, fabrication. ERP software application experience, Project execution, commissioning and operations.

I have a TWIC and Safety card, currently looking for offshore and overseas posistions.

To obtain a full time career that will enable me to utilize my skills and abilities. To also have the opportunity and availability for advancement with the company.

I am process engineer for vertical batch annealing line have 7 years experience, Training Courses(communication skills - business writing - problem solving and decision making - fundamentals and statistics analysis)

I’m currently on an M.Sc progamme in Petroleum Engineering at Heriot-Watt University, Dubai campus, I hold a B.Sc. Degree in Geology from the University of Legon, Ghana.

Indonesian Citizen healthy, 32 year’s of age, Certified Welding Specialist for last of ten (10) years, GTAW-SMAW: SS, CS, Duplex SS.

Qualified electrician - Electrical Technician - Diploma - Busy with btech degree

Mechanical engineer and a well engineer

Offshore Drilling Materials and Logistics Supervisor. with experience of 4 + years.... looking for better opertunity

In oilpatch for 7 years

10 years drilling experience

Process Engineer’ holding a capacity of Shift Incharge/Supervisor in Power Plant (Co-Generation), Offsite & Utilities operations at TATA CHEMICALS LIMITED (Urea Fertilizer Complex) Babrala (Budaun), Uttar Pradesh, INDIA

10 years of experience oil&gas upstream and downstream

Exp. driller, toolpusher, and directional driller with flex and joystick exp

Diploma of Associate Engineer in Chemical Technology in 2001.

Electrical Engineer with strong hands on soft skills like Auto CAD and experince in hand

Catering manager/site administrator seeks job

Heavy equipment operator with experienced in ARAMCO, Saudi Arabia

Experienced Overseas Work. Past Projects in Algeria, Chad, Iraq now in Kosovo

CWI(AWS) plus ASNT Level II

Respected sir, I am NCVT 3 year technical exam passed in plant operation & minor maintenance. Presently I am working in Reliance Refinery Jamnagar, India, in FCC complex and taking charge in propylene recovery unit and shp-tame unit.

10 years Process Engineering Experience in Oil & Gas and Petrochemical industries. Working for Established Company. Familiar with international code and standard e.g API, ASME, etc as well as COMPANY general practices e.g SHELL DEP, EXXONMOBIL DIM, PETRONAS PTS, etc.

First Prev 101 102 103 104 105 106 107 108 109 110 [ 111 ] 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out