Resume - Worked as Material Engineer for Saudi Aramco Material Standardization Division f...

Misco Jobs

Resume #87813

CONTACT INFORMATION:
View contact information...

OBJECTIVE

To pursue and share my knowledge and expertise in the field of engineering which is directly involve with maintenance, repair, procurement, technical review and evaluation of equipment specification, spare parts and construction materials.

PROFESSIONAL EXPERIENCE:

SOFCON/ICCL CONSULTING & ENG'G. CO., AL-KHOBAR, KSA 2007 - 2009
Material Engineer I

ESP Cataloguing Project, Aramco Material Standardization Division (MSD)
* Conduct detailed technical review of Spare Parts Data Package (SPDP).
* Identify in the Review Sheet all outstanding information and documents and submit to Saudi Aramco MSD Coordination Engineer for evaluation, follow up and approval.
* Ensure timely submittal of relevant information and documents such as equipment manufacturer's specification sheets, recommended priced spare parts list, assembly drawings, catalogue cuts and material test certificates.
* Ensure that all technical information and certified copies of documents (NMR 602 & 603) submitted by project proponents and contractors are in conformance with Saudi Aramco's engineering standards.
* Review of quotations from local and international suppliers.
* Closely expedite with procurement for timely delivery of zero balance items and those maintenance items which are classified as high priority.
* Monitor and update the list of spare parts items which are included in Parts Management Program.
* Extract technical data on Spare Parts List and Interchangeability Record (SPLIR) for required materials (by referring to technical drawing, equipment data sheets, manufacturer's catalogue and materials certificates) for an accurate and comprehensive technical purchasing specification.
* Analyze technical specification of the materials in order to create generalization (generic nature of items such as bearing, belts, gasket, valves, flanges, stud bolts, electronic controllers, circuit breakers, etc) without detrimental technical impact.
* Classify the spare parts according to its usage (e.g. consumables, wearing items, etc.).
* Establish minimum and maximum order points of the material.
* Identify and analyze using SAP R3 (by viewing Basic Data 1&2, Accounting 1&2, etc.) all existing equipment and spare parts information such as plant location, part numbers, description, unit price, interchangeability, and availability.
* Perform SAP extension for equipment which is already catalogued in the system.
* Create and assign codes for new equipment, vendor ID, and new primes for new spare parts.
* Catalogue equipment and spare parts information using Saudi Aramco's legacy-based Material Cataloguing System (MACs) software.
* Estimate the required quantity of each spare part to be entered in the system as per Saudi Aramco Cataloguing of Equipment Template (COET) Guidelines.
* Prepare and submit Saudi Aramco's SA-1149 documents to MSD Coordination Engineer for approval and uploading of all information in the database.

As-Built Project, Saudi Aramco Berri NGL Plant
* Report to the Project Manager.
* Lead the Instrumentation as-built team.
* Conduct field inspection and collate nameplate detail information to verify instrument specifications, locations, and field wiring terminations for necessary updates and revisions.
* Review and update instrument-related drawings such as P&IDs, ISS, Instrument Loop Diagrams and Logic Diagrams.
* Coordinate with other discipline engineers all changes and revisions in the drawings.
* Submit marked-up drawings to Saudi Aramco's Project Engineer for review and approval.
* Submit to the Project Manager all approved marked up drawings for consolidation and make necessary updates and revisions using Smartplan.

ABV ROCK GROUP KB, BURAIDAH, KSA 2006 - 2007
Equipment Spare Parts (ESP) Cataloguing Engineer

Saudi Strategic Storage Program (SSSP), Site 3
* Conduct detailed review of Technical Data Books Packages submitted by the proponent.
* Ensure timely submittal of relevant information and documents such as equipment manufacturer's specification sheets, recommended priced spare parts list, assembly drawings, catalogue cuts and material test certificates.
* Ensure that all technical documents and information provided by proponent are in conformance with Saudi Aramco Standards (SAEP 3101 and 3102).
* Review of quotations from local and international suppliers.
* Identify in UNIX database system those existing spare parts information such as part numbers, description, price, interchangeability and availability.
* Create and assign codes for new equipment, vendor ID, and new primes for new spare parts.
* Catalogue spare parts information such as part number, material of construction and unit price using Saudi Aramco Equipment and Spare Parts Data Entry Application Version 4 (ESP4) software.
* Estimate required quantities of equipment spare parts as per Saudi Aramco Copy of Equipment Template (COET) Guidelines.
* Establish minimum and maximum order points of the material.
* Submit a copy of the complete set of the Technical Data Book to SSSP Project Engineer for approval and close out of the package.

OPTIMUS INDUSTRIAL DEV. INC., LAGUNA, PHILS. 1998 – 2005
Plant Maintenance Supervisor

* Report to the Plant Manager.
* Lead the maintenance team during commissioning & start up of 10 MT Ballestra sulf(on)ation plant.
* Interpret and analyze technical drawings and equipment specifications sheets.
* Direct maintenance and concerned personnel in meeting cost and time schedules.
* Provide technical assistance and secures necessary vendor services for the final check out, turnover and commissioning of plant equipment.
* Review and classify the inventory based on movement and use of material (e.g. fast moving, slow moving, dormant, obsolete, capital, insurance etc).
* Establish Plant Maintenance Management System.
* Prepare and track down processing of purchase requisition orders to ensure that shutdown materials are available prior to start of shutdown.
* Closely expedite with purchasing personnel for timely delivery of zero balance items and those maintenance items which are classified as high priority.
* Inspect equipment and spare parts in their storage locations to ensure that they are not deteriorated/damage.
* Designate respective locations for equipment and spare parts received.
* Conduct research, study and implementation of maintenance cost saving programs.
* Establish an Equipment Directory System.
* Responsible for creating the Material Master Classification System by classifying spare parts based upon its application, type, material suitability, interchangeability and dimensions ( according to fit, form and function).
* Formulate Work Order procedures, maintenance guidelines and work instructions.
* Document, implement and maintain an ISO 9001:2000 standard quality system.
* Prepare and allocate budget and other resources for maintenance projects and upgrading of plant system facilities.
* Lead the production and maintenance department in the implementation of Plant TPM Program.
* Conduct technical trainings for production and maintenance personnel.

STEPAN PHILS. INC., BATANGAS, PHILS. 1996 – 1997
Senior Maintenance Engineer

* Lead the instrument team during commissioning & start up of 5 MT Ballestra sulf(on)ation plant.
* Operation and maintenance of GE Fanuc Programmable Logic Controllers (PLC).
* Repair and maintenance of stationary and rotating equipment.
* Repair, maintenance and calibration of process control instruments.

PROCTER & GAMBLE PHILS. INC., MANILA, PHILS. 1991 – 1996
Maintenance Planner & Scheduler

* Report to Operation and Maintenance Manager.
* Provide technical assistance and support to Engineering Manager during commissioning & start up of 5 MT Chemithon & Ballestra sulf(on)ation plants.
* Prepare maintenance activities and generate progress reports for special projects.
* Pepare weekly manpower schedules for maintenance personnel and contractors.
* Closely expedite with purchasing personnel for timely delivery of zero balance items and those maintenance items which are classified as high priority.
* Prepare long shutdown maintenance schedules.
* Monitor inventory of materials and spare parts and ensure their availability prior to shutdown.
* Verifies, checks discrepancies on spare parts quantities, packaging, quality and pricing.
* Classifies, reviews and input data in the system according to prices, manufacturers name, part number/model number and stock number of certain materials.
* Designate respective locations for equipment and spare parts received.
* Conduct follow-up on technical buyers and suppliers the purchase and delivery schedules of procured maintenance items.

Electrical and Instrumentation (E & I) Engineer
* Review and update of instrument-related drawings such as P & IDs and Instrument Specification Sheets.
* Generate database system for process control instruments.
* Operation and maintenance of Honeywell UDC 9000 Distributed Control System (DCS).
* Perform regular inspection and calibration of analytical instruments.
* Make recommendations for the proper instrument and material specifications required for the project.
* Performs preventive maintenance activities on all process control instruments.
* Installation of motor and control components.
* Installation and programming of Variable Frequency Drives (VFD).
* Insulation and winding resistance tests of industrial motors (AC & DC), bearing lubrication and replacement.
* Operation and maintenance of PLC controlled Rovema VPI-260E packaging machine.

EDUCATION:

* PAMANTASAN NG LUNGSOD NG MAYNILA (PLM), Manila, Phils.
Bachelor of Science in Electronics & Communication Eng'g (BSECE), 1989

LICENSE / CERTIFICATION:

* Electronics Technician – PRC Registration No. 262

TRAININGS & SEMINARS:

IECEP - KSA
* Distributed Control Systems (DCS) & Programmable Logic Controllers (PLC)

PHIL. GEOANALYTICS CALIBRATION & METROLOGY LABORATORY
* Principles of Metrology & Measurement Uncertainty

UNIVERSITY OF THE PHILIPPINES, NEC
* Substation Engineering
* Maintenance Management Course
* Industrial & Commercial Power System Protection
* Maintenance of Electric Motors

UNIVERSITY OF THE PHILIPPINES, ISSI
* 9th Comprehensive Course on Instrumentation & Process Control

INSTRUMENTATION CONSULTANTS INC. (ICI)
* Industrial Instrumentation

FESTO DIDACTIC
* Introduction to Programmable Logic Controllers (PLC)
* Introduction to Electropneumatics
* Introduction to Pneumatics

MERALCO FOUNDATION INSTITUTE
* Micro Computer Hardware Servicing Training Program

PROCTER & GAMBLE PHILS. INC.
* Interpersonal Managing Skills

FIL-TRANE MARKETING CORP.
* Basic of Air Conditioning and Refrigeration

ORGANIZATION:

* Institute of Electronics & Communication Engrs. of the Phils. (IECEP) – KSA Chapter

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 10916)

Go to Search Parameters...

Brief Description

Instrument and Control Systems Engineer, WorleyParsons, Qatar

Field operations and producing technology, Workover & Completion, Production Optimization, Water Flooding, Well Test Design and Interpretation, Artifial Lift Design and montoring, Well Planning and Development drilling, Strong software skills

I have experience as a tool pusher and driller.

Free! Drilling Superintendent: 21 years’ of progressive experience in land drilling, including extensive experience in international environments, with comprehensive management background.

8 year experience in materials, corrosion, thermal insulation and piping for the oil and gas industry, including FPSO’s, Offshore production platforms, Offshore offloading buoys, Onshore plants, LNG terminals.

Rig manager(workover) - Sudan, Field supervisor(workover and completion rigs) - Egypt, Company representative - Libya/Canada. Project supervisor - Libya

A result-oriented professional with nearly 14 years experience in Piping Design, Operation & Maintenance, Quality Assurance and Relationship Management. Handled a varie

Skillful, energetic and dedicated Project Controls Planner/Cost Analyst with extensive international Oil & Gas experience. Seven plus years interfacing with engineering, procurement, manufacturing, finance and accounting plus one year marine construction; installation and vessel operations with emp

I am a Chemical Engineer and have a master's in Heavy Crude Oil Refining. i also have a master's in Work Health and Safety. I have extensive experience in Oil Refineries in the Construction and Maintenance of new plants. i am willing to travel.

Extensive work in Gas, Liquid and C02 Measurement

Automotive Painter

SEASONED MAINTENANCE AND PROJECT MGMT. PROFESSIONAL

Senior Drilling Engineer

8 years' experience in petroleum refining; process modeling; profitability studies; production planning; LP (linear programming); PIMS; HYSYS; Petro-SIM; CrudeManager; Spyro; ProcessBook; DataLink; MS Office; M.Sc. in chemical engineering (specialized in petroleum processing)

I am a petroleum engr, US citizen, with 20+ years experience as Drilling Supervisor, on & offshore, in drlg, completion, workover, testing, in the US and many other countries. Familiar with deviated drlg, horizontal, drlg underbalance, H2S, wkg in remote locs. Fluent English & Spanish.

Workover & completion supervisor

Extended experience in Supply Chain Management process and strategies development, Service integration packages, negotiations, tender exercises, purchasing, logistics, Inventory control and Warehousing.Dynamism, efficiency, objectivity and perseverance

Over 20 years of experience in Plant Operations or Maintenance.

I have 9 years experience as Material -Procurement/ Expediting/Materials co-coordinator, the assignment which included handling of all aspects of Oil and Gas Industry related SAP-SCM/ Oracle 11i5.9 based EBS, EAM,CPL modules.

Instrumentation Engineer with 12 years experience of Instrumentation & control scope of project engineering and plant maintenance in Oil & gas,petrochemical and chemical industry.

Gas turbine component Design, GD&T, Performance, CFD, CFX, Fluent, LES.

A Senior Waste management/Environmental Protection Technician with a wide range of experience Documentation/Safety Permit issuance, Isolations Procedures, Operations & Maintenance of industries, Waste management plants. Able to work on own initiative and as part of a team. Proven leadership skills

NEBOSH, INDUSTRIAL SAFETY DIPLOMA

- Experience in managing a team at the work place.

A Design Specialist responsible for managing the setup, standards, training, design-team leadership, and coordination of Intelligent Data-centric CAD work within multiple offices and Engineering disciplines, both domestic and international. P&IDs, Piping, Smartplant, SPPID

Chemical engineer having more than 12 yrs. experience in petochemical in operation and design consultancy.Also having experience in precommissioning and commissionig of petrochemical plants.

Directional Drilling Supervisor with 18 years in Oil & Gas Industry

Ph.D. in Geophysics (2005), C++, Fortran developer, geomodeller, processor. 5 years of industrial experience, 10 years in academy - geophysics and applied mathematics.

15 years real estate experience with 7 years oil and gas experience.

Business owner, aerospace mechanical engineer, U.S. Navy military veteran.

More than 7 years experienced engineers with a PHD degree in technical construction can conduct strike-calculations and dimensioning of onshore marine constructions for oil and gas production. Skillfully use software like LS-DYNA, MARC, SESAM etc for the structural analysis.

Petroleum Engineer

Maintenance, Construction, commissioning for Refineries, FPSO, Offshore Platforms etc.

Preparation of companies to ISO 9001, 14001, API SPEC Q1, OHSAS 18001 or any other Management systems standard certification.

I was working at sea for 28 years, including 12 years as a Master. Though I have a quite large experience in the trading on tankers I would like to find the same position in offshore industry, such as FSO, AHTS, PSV w/ot DP.

Experienced Senior Drilling Supervisor • 29 years hands-on oil field experience, including cyberbased Jack-ups, semi-sub and platform rigs and all size land rigs.

I was directly responsible for all completing timely daily drilling and cost control reports required by the operator and regulatory agencies; ensuring equipment and materials meet project and regulatory requirements; ensuring project inventory requirements are met; enforcing company health, safety,

Msc in Safety, HND Safety tech. NEBOSH, ASP

I am a dedicated professional who understands the importance of retaining accounts. My ability to get the job done, including quickly and accurately diagnosing and troubleshooting technical problems, has solidified the loyalty of numerous clients. I assure you, these factors, as well as the skills i

I desire to maintain a safe and efficient work standard that will reach the client goals as well as keep moral at its highest between all service groups involved. I plan to do this through excellent communication skills and proffessionalism.

Have been a Project Manager/SCM for more than 10 years, also have been in charge of Permitting.

PDMS piping designer. PDMS modul design, draft, izodraft. Layout drawings and ISO sketch. Expeience in: piping design for power plants, Steam turbines, compressor plants, support design for chemical industry and refinery

I am actually working on behalf of ExxonMobil refinery in France as a system and network engineer. I have a good experience in control systems (PLC and DCs based systems) as well as in SCADA supervisory. You can find enclosed my CV with a brief description of my skills.

Accountant, Accounts, Finance, Financial

I am capable of all aspects of the oil field.

Over 8 years(1 Year in Kazakhstan) Professional Experience in Project Document Management, Administrative and Document Control of Engineering Procurement and Construction activities of Process Plants including Oil and Gas Installations (NGL and Sour Gas Facilities), Refineries and Petrochemicals. M

Worked as Material Engineer for Saudi Aramco Material Standardization Division for Equipment Spare Parts Cataloguing Project. Proficient in using SAP R/3, MACs, UNIX and ESP4.

Experienced derrick operator, floor hand, roustabout, and driller

Welding Engineer Specialist

23 years of experience in Oil & Gas production and maintenance for offshore and onshore facilities. Experience includes in monitoring Condensate Stabilization Unit, Crude Oil Processing, Gas Compressors and Gas Dehydration System.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out