Resume - Currently working as a Civil/Structural Engineer in WORLEYPARSONS (ABU DHABI

Misco Jobs

Resume #87844

CONTACT INFORMATION:
View contact information...

Resume Summary
Total 6.5 years of design experience in Basic Engineering and Detailed Engineering of Structural & Civil works in Oil & Gas, Refineries and Petrochemical Industries.
Currently working as a Civil/Structural Engineer in WORLEYPARSONS (ABU DHABI – UAE).
Work experience is primarily in Analysis & Design of Stuctures in Petrochemicals and Refineries Plants e.g. Technological Structures, Pipe Racks, Pipe Bridges, Compressor House, Reactor Supporting Structures, Column, Exchanger and Vessel Supports, pipe culvert, vibratory foundations like compressors, Buildings like Administrative, Substation Building, Generator building etc. using Software like STAAD- Pro, Sacs, Foundation 3D, Mat 3D, other softwares and using International codes like AISC, ACI, ASTM, BS etc. Expertise in manual design using excel.
During the projects, coordination with Client and inter-disciplinary coordination has been an intrinsic part of responsibility.
Presently interested in a long-term association with a reputed organization in the field of Industrial Engineering.

Work Experience:

1. Working as a Civil/Structural Design Engineer in WORLEYPARSONS, ABU DHABI (UAE) from 11th May 2008 to Till date.

* Working for Taweelah-Fujairah gas pipeline project for Dolphin Energy (Detailled Engineering)
i) Preparation of Design Specifications.
ii) Engaged in Preparation of GA & site grading drawings for the plant.
iii) Preparation of Architectural drawings for the Control Room Building & substation building.
iv) Analysis & Designing of Pipe Culvert Box.
v) Analysis & Designing of Control Room Building & substation building.
vi) Analysis & designing of Anchor Block.
vii) Design of precast foundations for pig launcher/receiver, filter & pipe supports.
viii) Analysis & design for access platforms.
ix) Analysis of communication tower.
x) Designing of steel piperack, trestles.

* Worked for Al Tajir Glass Factory (Feed Engineering.
i) Preparation of civil & structural MTO's along with designing.
ii) Designing of Pile foundations.

PAST EXPEREINCE
2. Worked as a Senior Civil/Structural Design Engineer Technip from 20th Dec 2004 to 7th May 2008.

* Worked for Essar Oil- CDU/VDU & DHDT project i) Design of precast piperacks.
ii) Involves Designing of Process structure.
iii) Design of Horizontal & Vertical foundations.
iv) Design of compressor shelter.
v) Design of compressor foundation using excel.

* Worked for Ras Laffan Project i) Complete Analysis & Design of Pipe Supporting Structures as per American Codes.
ii) Analysis & Design of Precast Piperacks.
iii) Design & Review of connections.
iv) Complete Analysis & Design of Technological structures.
v) Analysis & Design of Equipment foundation for Horizontal & Vertical vessels.
vi) Check & Review of drawings.
vii) Engaged in preparation of underground facilities.
viii) Design of Compressor shelter.

* CLOUGH Project: Oil and Natural Gas Corporation Ltd., (COMPANY), was engaged in expansion of Onshore Processing Terminal at Odalarevu, (AP). Basically it includes:
i) Analysis & Designing of Industrial Buildings, Piperacks.
ii) Design of foundations for Compressors, Generators, Vertical & horizontal vessels, Pig launchers, Water treatment units, Air Receiver, Air Compressors, Refrigeration unit, Pumps.
iii) Design of foundations for Stack structure, Flare tower, and Communication tower.
iv) Analysis & Design of structures supporting Bus Duct.
v) Analysis & Design of stack structure.
vi) Preparation of Design Specifications, Scope of Work & Schedule of Rates.

3. Worked as a Structural Engineer in Design Consultancy, New Delhi from July 2003 to 18th Dec. 2004.
Worked on designing of residential towers, each of 19th, 17th and 15th storeyed.
Responsible for designing, making structural drawings and their detailing work in a Design Consultancy.

Technical Qualification:
M.Tech. in Structural Engineering: Passed with Hons. (Secured 79 % marks) from Z.H. College of Engineering & Technology AMU Aligarh in Feb 2004.

Bachelor of Engineering (Civil): Passed with Hons. (Secured 79 % marks) from Z.H. College of Engineering & Technology AMU Aligarh in 2002.

Additional Qualification:
Qualified GATE - 2002 with 89.06 percentile

Computer Proficiency:
Packages: STAAD Pro, Sacs, SPR, Foundation 3D, Mat 3D, Excel, AutoCAD 2008, Adobe Acrobat, Office XP.

Personal Profile:
Date of Birt: 28th Nov. 1977
Nationality: Indian
Marital Statu: Bachelor

Time required for joining: One Month Notice Period

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 10902)

Go to Search Parameters...

Brief Description

Static Equipment Mechanical Engineer

Simulation studies, preparation of detail feasibility reports, FEED package, detail engineering, HAZOP, licensor selection, debottlenecking of existing units etc.

A highly creative, goal-oriented process design engineer with strong communication and presentation skills. Demonstrated experience in design, simulation and engineering calculations. A team player and computer professional.

Petrochemicals Marketing Consultant

Senior Petroleum Engineer with Six Sigma Master Master Black Belt Proviciency. Best for Oil Company who need to IMPROVE its PRODUCTIVITY. High production, safe, with lower cost.

Gas engineer, pipeline engineer, gas distribution, transportation, metering reducing gas, midstream/downstream gas, gas facilities.

Full hands-on maintenance, Working under extreme conditions

M.Sc. Petroleum Engineer with excellent experience in Petrophysics- Specialist in Geolog Software_highly self motivated, Oriented and hard working, able to work in multidecipline, willing to travel internationally on mission

sr mechanical engineer

Linux/Storage Admin

Piping detail design isometric MTO and layout detailng etc

Highly skilled engineer with over 10 years experience undertaking electrical engineering projects as well as having an understanding of industrial automation

Currently authorized to work indefinitely in the United States (Green card holder). Have more than 6yrs work experience in the oil industry. Worked as a Petroleum/Reservoir engineer and well versed in EOR and secondary recovery techniques and use of commercial reservoir simulators

Currently working as a Civil/Structural Engineer in WORLEYPARSONS (ABU DHABI – UAE).

I am a fully qualified Electrical Engineer to HNC level, having served my apprenticeship with a multi-national company within the UK. I enjoy excellent health and am competent, dependable and hardworking. I am equally comfortable working on a solo project or as part of a team.

Mechanical Engineer with 12 +years expereince with experience in Front end Engineering and Detailed (FEED) Engineering, Project Management and supervision industrial projects in Petrochemical/Oil & Gas. Presently i am working in a Engineering Consulting Company in Saudi Arabia.

Having total 10 years of exp. in HSE-Safety field in Petroleum/oil/gas Project, steel, automobile plant and project at Oman , UAE, Qatar & India

Over 10 years experience in shipping industry mainly in estimation, project planning, building, design and purchase.

SENIOR PIPING / MECANICAL DESIGNER

Geotechnical Field Rep

•Extensive exposure to complex clastic environments. •Pick up formation boundaries and lithology changes; determine casing point.

A highly skilled Chemist Engineer with over 24 years experience in Oil and Gas Industry in Romania and abroad. QUALIFICATIONS: technical advisor, training supervisor, commissioning & start up engineer , shift supervisor

I have 20+ years experience in fire, safety, risk, design and testing. Of this 14 years were spent overseas.

Senior process engineer O&G; 20yrs exp. FEED, basic & detailed eng, operations. Troubleshooting, P&ID, C&E, risk assessment, HAZOP. Units: compression, dehydration, oil/water separation, cond. stabilisation, hydrates, gas/water injection. Computer skills: Hysis, ProII, Pipephase, HTRI, Flarenet.

Senior Mud Engineer as employee with Halliburton – Baroid at Port Harcourt Nigeria, working offshore Guinea Gulf in deep water Rigs.

Senior Lease Operator with 20+ years experience in Oil and Gas Operations.

I have been working offshore for the past 25 years, working my way up through all positions to Day Drilling Supervisor. Since August 2007 to present, I have been working onboard the ‘Wilcraft’ jack up rig first as Night Drilling Supervisor and as of September 2008 as Day Drilling Supervisor.

I´m WSG, I´d worked in Mud logging services & Geochem Lab in Brazil more than 8 years, my last 3 years working in Argentina as WSG

NAval architect

Motivated and capable in team or independent work setting , Strong problem solving abilities, Mechanical aptitude, Receptive to feedback, Attention to detail with strong sense of urgency and precision , Honest and hard worker, Quick learner, Supervisory skills (managed up to 60 people),

Rig Mechanic 32 years exp onshore and offshore with supvisory esperience also

28 safe years in the oi and gas/petrochemical industries. Worked in commissioning jobs throughout Canada and I am seeking an international placement with 28/28 rotation onshore

Free! Highly Experienced Operations Manager

iadc certified drilling supervisor with 25 years experience in the oil & gas industry. Strong knowledge of all aspects of drilling in both horizontail & verical wells

Extensive experience of installation and inspection & supervision of electrical equipment in hazardous and non-hazardous areas i.e. - Installation and commissioning of P.L.C. panels: switchboards: main circuit breakers: transformers: generators: 3 phase motors: 3 phase power supplies: marshalling bo

QA/QC Inspection Engineer

I am a Petrophysicist with 8 years experience in a major independant energy company. I have worked in exploration and field development. I have a masters degree in petroleum geology and undergraduate degree in geology. I have well developed communication and interpersonal skills.

A result-oriented Instrument/Control Systems Engineer offering over 11 years of experience in the Petrochemical, Oil, Gas and Refinery industry handling operations and maintenance.

Varied geographical experience and knowledge of most mud systems used by mud companies in the industry and all type of cement slurries.

With a passion for safety duties, the motivation to succeed, strong interpersonal and effective communication skills and a particular talent to forward-planning to develop effective and feasible solutions

My skills as a drilling foreman are Drilling, Work Over, Completion and Safety. I have 40 years of oilfield experience. I have an up to date Well Control Certification.

Pipeline & facility supervision

Looking for and Field Operating Position / Production Coordinator, Can also Well Service

Repair, maintenance and troubleshooting onshore and offshore units (ONCC, OLU), Generators, Compressors (WAC-SS22, WAC-QB), Hydraulic units (EHPS, DAPS, OSU,OSLC), HVAC. Hook – up, setup and installation offshore & onshore equipments Corresponding with Customers and Suppliers I have

I am someone who is highly motivated and organized. I have over 20 years in the construction industry, including work in Western Canada and time in Angola as a Construction manager, where my duties were tto evaluate and implement new processes to achieve cost certainties in an exploration environmen

I have extensive supervision and management experience (including QA/QC) on contracts valued from £30 million to £3 billion in the fields of Oil & Gas related work, military airfields, Power plant construction, water provision and dam construction in the Middle East, Africa and the Caribbean.

Reservoir or Production Engineer

Social Responsibility Specialist

Mechanical Engineer, with +30 yrs experience in Quality Assurance Management and Engineering Management, executed more than 10 projects in Fertilizer, Refinery and Petrochemical industry

Petroleum engineer with 20+ years of diverse experience. 4 years of multi cultural supervisory experience in North Africa. References available on request.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out