Resume - Pressure vessel design engineer, Proficient with: SolidWorks, Inventor, Pro/E, A...

Misco Jobs

Resume #87863

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE

Pressure Vessel Specialist
Air Liquide Process & Construction, Houston TX (5/2007-10/2009)
q Performed, reviewed and validated pressure vessel designs, drawings & calculations, both API620 and ASME coded cryogenic tanks such as liquid nitrogen (LIN) and oxygen (LOX) tanks.
q Performed sizing of pressure swing adsorber (PSA) vessel based on fracture mechanics and fatigue analysis to Appendix 5 of ASME VIII-2.
q Supported Project Procurement activities: Review Technical Bid from suppliers, Participate in kick off meeting with suppliers.
q Prepared procurement technical packages for pressure building up coil, manual valves, root valves and pressure vessels, and developed sketch for liquid nitrogen tank (LIN) API620 tank nozzle configuration and adsorber vessel pre-sizing calculations.
q Supported project procurement activities: prepared technical and commercial bid tab and reviewed the technical bid from suppliers, and participated in kick off meeting with adsorber vessels fabricator in projects.
q Reviewed vendor technical drawings and specifications against Technical Specification for in-line device and pressure vessels and updated technical specification to reflect as purchased basis.
q Supported procurement supplier qualification activities through supplier technical audits, such as helium leak test and manual valves.
q Coordinated with Project Engineer and System Engineer on comments and modifications to the project P&IDs.
q Provided technical assistance during commissioning, permitting, erection and start-up such as the test flange verification, cold box nozzle modification.

Project Engineer ASME Certificated Member (8733347)
Veolia Water Solution & Technologies, Santa Fe Springs, CA (10/2006-5/2007)
q Reviewed drawings and approval for fabricationq Prepared and tracked the project schedule q Sent drawings and engineering information to customers as required on contractsq Prepared requests for quotation package for all components q Prepared and revised drawing package and purchase order requisitionsq Worked in KD Edwards accounting system for tracking projects and purchases and q Checked ASME VIII-1 code calculations and vessel fabrication drawings from vendorsq Involved project of SUNCOR Canada SAC (Strong Acid Cation) Series Softeners and CRN registration applications q Responsible for project of three Auto-Jets for Summit Valley Inc.
q Responsible for project of two vertical SAC Series Softeners for AUGUST Inc.
q Completed stress analysis for a brine ion exchange piping system

Mechanical Design Engineer / Structural Analyst, ASME Certificated Member (8733347) Maxfield Inc., Calgary, Canada (4/2003- 10/2006)
q Stress analyzed and designed a fire tube under operating load (stress due to dead load coupled with thermal stress) by Appendix 4 ASME VIII, Div. 2
q Evaluated fatigue life of large vertical vessels due to wind and seismic vibration by Appendix 5 of ASME VIII, Div. 2
q Designed and interpreted the calculation of highway pressurized cargo transports to CSA B620, 49CFR and ASME VIII-1 & 2 codes for Transport Canada Registration Number (TCRN) and Department of Transportation (DOT)
q Designed and calculated storage horizontal and vertical pressure vessels by ASME VIII-1 & 2 codes for Canada Registration Number (CRN)
q Code calculated & verified a 140,900 USWG 140" ID Butane Storage Vessel by FEM
q Completed registration calculations (both ASME code calculation & FEA) for pressurized cargo transports: 8 Axel "B" Trains LPG/NH3/CO2, BOB Tails, and Tri Axle Trailers q Analyzed seismic and winding dynamic stress response of large vertical pressure vessels such as a large vertical vessel built by Chevron in Vancouver, BC
q Designed an 8,000 USWG 72 inch ID pressurized CO2 cargo transport for Calfrac Ltd.
q Designed & code calculated 42,000 USWG 140 inch ID LPG storage vessel for Ford Energyq Designed & code calculated 1,000 USWG 40 ½ inch ID vertical dispenser for SuperSave q Designed & code calculated 30M, 84M and 90.5M 129 inch ID LPG storage vessel for Encanaq Designed 36M, 63M and 105M 120" ID CO2 skidded storage vessel for Ferus Gas q Designed 36,000 USWG skidded storage vessel for Mutual Propaneq Designed & code calculated 90,500 USWG 129" ID storage vessel for Plains Marketing q Designed & code calculated 61,700 USWG 129" ID storage vessel for Plains Marketing q Analyzed hydrostatic testing collapse of a 156" ID 105,000 USWG NGL storage vessel and designed a new hydro-test skid q Designed and stress analyzed rig mats and support saddle extension for storage vesselq Designed and stress analyzed skid for storage vessel q Revised structure of vertical pressure vessels by FEAq Verified and modified attachment designs of vertical pressure vessels by FEA
q Designed sub-frames of pressurized cargo transporters by FEA
q Designed and analyzed a rectangular tank (TC44 tank in Canada and MC44 in US)
q Analyzed thermal transfer and dynamic stress response of N2 cryogenic pressure cargo transport q Piping design (B31.3) for CO2 pressurized cargo transports q Conducted a project research in explosive containment vessel & designq Piping (B31.3) design for 36,000 USWG 120" ID CO2 storage vessel for Ferus Gas q Piping (B31.3) design for 36,000 USWG 120" ID CO2 storage vessel for Canyon Service q Piping (B31.3) design for 64,000 USWG 120" ID CO2 storage vessel for Ferus Gas q Piping (B31.3) design for 30,000 USWG 120" ID LPG storage vessel for Mutual Propane q Piping (B31.3) design for pressurized CO2 cargo transport for Calfrac Ltd.
q Pressure vessel ladder and platform design q Pressure vessel bridle piping and bridle design

Structural Analyst / Mechanical Design Engineer
Institute for Space Research, Calgary, Canada (4/2001- 4/2003)
q Involved the project of Enhanced Polar Outflow Probe (e-POP), the first made-in-Canada multi-purpose small satellite mission financed by Canada Space Agency (CSA)
q Designed and revised electro-mechanical instrumentations q Analyzed thermal transfer and thermal stress for satellites and mounted instrumentations by FEM
q Simulated instrumentation vibrations of a micro-satellite in different launch phases q Designed a lifting arm for moving instrumentations into the calibration facility of ultraviolet vacuum tank q Package designed Suprathermal Electron Imager and Ion Rapid Imager used in exploring out-space environment in Venus and Mars q Revised micro-satellite mechanical design for Enhanced Polar Outflow Probe

Research Associate
Advanced Engineering Design Laboratory University of Saskatchewan, Saskatoon, Canada (5/1999-4/2001)
q Developed a new method for robotic inertia force and moment balance and the created new method was accepted by ASME and published in ASME Journal of Mechanical Design.
q Designed a re-configurable five bar robotic manipulator with two degrees of freedom q Supervised the manufacturing procedure of the five bar robotic manipulator and responsible for the purchase of electrical accessories such servo motors and controllers q Designed a PID control system to simulate trajectory tracking and vibration control for a balanced parallel manipulator q Conducted one project research financed by Natural Sciences & Engineering Research Council (NSERC)

Lead Research Engineer
CAD/CAM Research Center, Northeastern University, China (5/1992-4/1999)
q Helped an electric motor company in China customize a CAD applicationq Instructed engineers in the use of Solidworks, AutoCAD and Mechanical Desktop q Developed CAD/CAM system for Industrial Steam Boilers q Cooperated on the Chinese mechanical standard development of AutoCAD

Mechanical Manufacturing Engineer
Machine Shop of 17th Metallurgical Construction Corporation, China (11/1986-8/1989)
q Responsible for manufacturing processing procedure for mechanical parts q Supervised manufacturing processes at machine shop q Estimated time of manufacturing process and manufacturing cost q Responsible for handling OEM projects q Designed fixtures/jigs for the manufacturing of specific ordered components q On site technical assistance at machine shop

EDUCATION
q M. Sc. in Mechatronics (2000)University of Saskatchewan, Canada q Ph. D. in Mechanical Design and Theory (1998) Northeastern University, China q M. Sc. in Mechanical Design and Theory (1992) Northeastern University, China q Graduated in Mechanical Manufacturing (1986)Eastern China Metallurgical University, China

SKILLS
q Proficient with: SolidWorks, Inventor, Pro/E, AutoCAD, Algor, ANSYS, COSMOS, Matlab, Compress Codeware, Intuitive ERP
q Proficient with ASME Code VIII, Div. 1 & ASME Code VIII Div. 2, B31.3
q Skill at using the knowledge in WRC107 & WRC279
q Computer Languages: EXCEL VBA, VC++, VB, Matlab, Fortran, Autolisp

OVER 20 PUBLICATIONS, SUCH AS:
q "140,900 USWG 140 Inch ID Butane Storage Vessel Calculation and FEA Verification," 2005 ASME Pressure Vessel & Piping Division Conferences, PVP2005-71123, Denver, Colorado, USA
q "Dynamic Characteristics of Rolling Mill Drive Trains with Backlash-Mathematical Simulation and Results," 1999 ASME Design Engineering Technical Conferences, DETC99/VIB-8268, Las Vegas, Nevada, USA
q "Method of judging the self-excited vibration of rolling main drive system in rolling slippage," 1998, Journal of Vibration & Sound, Vol. 215, No. 5, pp. 1135-1143

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 10902)

Go to Search Parameters...

Brief Description

HYSYS/PROII/NGL/LPG/LNG/SYN GAS - CONCEPTUAL, FEED AND DETAIL - REFINERY, NATURAL GAS, CRYOGENIC PROCESS, SOUR GAS REMOVAL, ADVANCED PROCESS CONTROL (APC), GASFICATION (BtL, CtL and GtL). DISTILLATION AND REACTOR. HYSYS/PROII/ Distillation/Separation Sequence/Pinch Analysis.

HVAC FOREMAN

Drilling supervisor onshore with a good experience in multilateral wells.

22 years experience in maintenance , compressor , generator , pump , drilling equipment , machine shop service , manufacture , inspection service , production , wire line , fishing tools , welding work , commissioning.

Process/Commissioning/Start-up/Operation/Exploitation/Engineer

Condition Monitoring, Reliability Engineer

HSE-Engineering Graduate, P.G. Diploma in Industrial Safety, NEBOSH ,Ecology & Environment, Lead Auditor OHSAS 18001, specialized in Process and project Safety Management, Safety Auditor, Emergencies Planner, Advance Experience in the Management of Major Accident Hazards Controller and Trainer

Free! Geologist with 20 years experience in minerals exploration & oil and gas industries.

Pipeline, Piping & Mechanical Equipement design and construction support

Worked in exploration, production and academia

Pressure vessel design engineer, Proficient with: SolidWorks, Inventor, Pro/E, AutoCAD, Algor, ANSYS, COSMOS, Matlab, Compress Codeware, Intuitive ERP; Proficient with ASME Code VIII, Div. 1 & ASME Code VIII Div. 2, B31.3; kill at using the knowledge in WRC107 & WRC279

Highly skills reservoir engineer with 18 years E&P experience and a Masters in Petroleum engineering Degree. Experience includes reservoir simulation, water flood design and management, EOR techniques, Heavy oil development, reserves evaluation, well test design and analysis & reservoir management

19 years experience in the Oil Industry with both service company & operators in UK, Oman, Australia, Brunei, Saudi, and Malaysia. Experience in Field Development Geology and geocellular modeling.

Position: Senior Instrument Engineer / Qualification: Master of Science (Electronics) - Queen’s University of Belfast

Professional Engineer with 19+ years of experience in engineering and project management, including design, sizing, and specification writing of various static and rotating equipments.

A seasoned completion/well intervention/well test professional with 18 years of experience with expertise in sand control, intelli.

Sr. Geologist with strong project management experience

the position of Chemist and subsequently to put my contribution for the growth and development of the company by utilizing my best efficiency and skills and to achieve my further career advancement opportunity.

first class marine negineer

Experienced Principal/Senior Control Systems Engineer who can contribute significantly to your company.

I submit my application for the same.For the Eighteen years , I am working with Reliance Industries Limited Hazira Complex. During this period I was involved in setting up different laboratories , e.g.Water Laboratory,MEG Laboratory,PVC/VCM Plant Laboratory,Polyethylene Plant Lab,Polypropylene

MS in Petroleum Engineering, 20+ Years experience as Reservoir Engineer. Skilled in Reservoir simulation, Field Development Plans and Well & Reservoir Management.

A proactive and enthusiastic individual with 17 years of extensive expertise in the field of offshore positioning/navigation/geophyscial/pipeline/hydrographic survey.

Sailed for lasat 18 years on board Chemical, petroleum, OBO and Bulk carriers. Extensive experience on drydocking and repair yard. Completed conversion of a ship to FSO at Keppel Shipyard.

Sequence Stratigraphy, tectonic, pre/post-stack seismic attributes, petrophysic, static reservoir modeling, fracture modeling

I have 18 years experience in Oil & Gas Industry.Experience in completion execution: Completion activity and workover operation, Well Testing (Oil / Gas), Gravel Pack, Gas Lift, Submersible Pumps, Perforating Technique, Well Stimulation (Acid / Frac), Cement Squeeze Operation.

Well-developed interpersonal skills.

Senior Process and flow assurance engineer with full project cycle experience.

HSE / Terminal Operations / Construction / Turnaround

I am a licensed Canadian engineer with M.Sc. degree and 28 years experience in Instrumentation & Control Systems (DCS&PLC) design, instruments specification (InTools), purchasing, commissioning, start-ups, maintenance, and training. In past twelve years I worked with major EPC offices in Calgary

I am an MBA with an engineering degree and over 18 years of experience in oil and gas industry across various disciplines like HSEQ management, offshore opeartions and construction projects. Currently, I am employed as the Head of HSEQ at a large organization.

Administration & Finance Specialist in Most Fields of Oil & Gas Industry

With over 28-years of procurement and logistics related experience in the Oil & Gas (Domestic, International Field and Office). Well respected by service and supply companies worldwide, I am currently seeking a challenging position in an international company. Whereby, I can utilize, enhance, and co

Piping Stress Oil/Gas, Off/Onshore, FPSO's and Nuclear - Caesar,Autopipe and PSA5

A committed and professional with over 27 years of progressive and varied experience in the field of Mechanical Engineering in the areas of Operations, Maintenance & Inspection of Petrochemical, Oil and Gas Equipments, Marine equipment. Expediting of equipment for oil and gas industry

I am a positioning specialist/navigator with over 19yrs post qualification experience. I have worked in various countries including USA, Saudi Arabia, Nigeria, Chad, Egypt, and UAE. I am experience in both marine, land, desert operations seismic surveys. I have also worked as a consultant client rep

Highly competent contracts administrator with extensive experience administering multi-million-dollar-dollar contacts for major projects in the power sector. Expertise includes managing pre-award contract management as well as post bid contract management incl. expediting.

I am Petroleum Geologist with +20 years experience in subsurface projects. These experiences cover mostly production geology, drilling operations and a few exploration projects. I was also involved in heavy oil projects, including drilling operations, well geostering and geocelular 3D geologic model

- Coordinating services e.g. directional drilling, fishing, drilling tools, liner hangers, packers, cementing, stimulation, wire line, geology, gyro survey, electro logging, etc. - Implementation of logging operations and witnessing the same. - Monitoring well profiles as per requirements (both Ge

Experience 14 years in Refineries (Fuels & Lube) as a Process Engineer to Technical Services Manager in India. 9 years in KNPC as a Process Design Engineer, in Project Department, implemented minor and major projects in 3 Refineries. 3 years in EPC Company, Canada, Designed SAGD utilities and SRU.

B.Sc. in Petroleum Engineering, 28 years work experience whereof 16 years in drilling supervision and operations, 4 years drilling engineering and planning.

Rigging & Lifting Specialist

Worked on onshore Oil collection & processing plants, Gas Plants, Offshore Platforms & FPSO during pre-commissioning and commissioning levels.

Over 30 years experience in Oil and Gas Petrochemical Industries onshore and offshore in the UK and overseas. Experience gained on various onshore projects, i.e. Power Plants, Chemical Plants, Pumping Stations, Alumina Plant, and Petrochemical Refineries ;BSc Mech. Eng..

Free! I am an International Sr. Well Engineer with a wealth of worldwide experience and knowledge. I have a Petroleum Engineering degree and 27 years in the industry. I want to continue to contribute to the technological challenges of the energy arena, particularly offshore, subsea and deepwater.

Over 25 years of international oil/gas industry experience as a professional Geologist, I worked on Africa, Middle East, Canada, North Sea, India, Kazakhstan, Trinidad & others. Proven track record in geological exploration & development venues: prospect generation, new ventures andplay fairway

Marketing Leader

Qualification : B.Sc. Accounting and MBA Accounting and Finance. Experience : 18+ years experience in contracts and procurement (C&P) for oil and gas industry. Manages and executes all steps of the contracting processes, i.e tenderings to contract closures.

Drilling exploration production, per cv below

B.E. (Mechanical) - 1980

First 1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out