Resume - My strong background is in the reservoir characterization in both clastic and ca...

Misco Jobs

Resume #87877

CONTACT INFORMATION:
View contact information...

Objective:
To further specialize in the field of my work and to implement the knowledge and skills gained on the job assigned to the best of my ability.

Career Highlights & Achievements:
- Successfully planned and geosteered about 100 horizontal oil producers, horizontal water injectors and slightly deviated observation wells for three main carbonate reservoirs in Qatif field, Saudi Arabia within 6 years with Saudi Aramco.

- Completed the tar identification and characterization studies and generate the tar distribution maps for two carbonate oil reservoirs, Arab-C and Arab-D reservoirs by integrating the data from core description, pyrolysis (geochemical) analysis from core and while drilling, mudlogging sample descriptions while drilling the well, moveable oil plot, Nuclear Magnetic Resonance (NMR) log interpretation and RFT/MDT data. In certain areas, as a results of the integration of the tar model generated from the studies and pyrolysis while drilling contributed to the cancelling of the NMR logging which contributed to a significant cost savings for the wells. The tar maps/grids were also used to optimize the water injectors well placement for both reservoirs.

- Being awarded as the best Exploration Organization team of the year in 2004 for the contribution in that particular year to achieve the development increment target of producing 500,000 barrels per day. This is achieved with a lot of constraints in man power, geosteering the wells 24 hours a day, without any 3D seismic to delineate and reduce the structural uncertainties and also without any pilot hole to determine the tar-oil boundary prior to drilling the horizontal wells.

- Built the 2D geological grids using the Z-Map Plus mapping software to map the four Arab reservoirs (Arab-A, B, C and D) with the internal layers (7-11 sub-zones for each reservoir) in Qatif field, Saudi Arabia. This is achieved by incorporating the 3D seismic map and fault interpretation and included all the pseudo point picks projected from the horizontal wells penetration. The project involved the sequence stratigraphic correlation for about 300 wells which penetrated all four reservoirs prior to mapping and specific steps and process in Z-Maps to generate all the 2D geological grids. Provided the updated structural maps/grids for all the top and base with the internal zones to the 3D modeler to use the maps as a framework for building the 3D geological models.

- Involved heavily in the Qatif field Productivity and Injectivity Enhancement project which identified the non performing producers and injectors to be candidates for workover opportunities. Successfully sidetracked the old vertical wells and re-designed the non-performing horizontal water injector wells to be placed 20-25 ft TVD above partial tar level or top of a heavy oil column.

- Leading a team of reservoir geologist, geophysicist, and reservoir engineer in Murphy Oil Corporation first phase exploration drilling program which leads to the first discovery of a few channels sands in offshore East Malaysia. Successfully completed the Field Development Plan (FDP) for West Patricia field development and delivered the first oil for Murphy in Malaysia within a year from the date the field was discovered.

- Exposed to all aspects of geological works while working for Exxon-Mobil for about 10 years from Well Site Geologist, Development/Production Geologist, Reserves Geologist, Log Analyst and Exploration Geologist. Was a Lead Geologist for PM-5 and PM-8 blocks off shore Peninsular Malaysia which consisted of 22 oil and gas fields. Involved heavily with the preparation of the Field Development Plan (FDP) and Commercial Quantity Declaration (CQD) for the commercial fields to be developed and also identified the uneconomical fields to be relinquished back to PETRONAS (Malaysia National Oil Co.) within these two blocks.

- Gained early experience as a Development/Production Geologist in Exxon-Mobil when was in charged of two platforms drilling 80 deviated and five horizontal development wells for Seligi oil field and Jerneh gas field, both in a clastic reservoirs, offshore Malaysia.

- Exposed to all aspects of drilling operations and well site and operations geology while working for EXLOG throughout the Asia-Pacific region. Developed the skills to an expert level in mud logging and pressure evaluation interpretation and well site and operations geology.

Experience: Total oil and gas industrial experience of about 24 years

Year 1985–1990: Exploration Logging International Inc.(EXLOG)
Location: Asia Pacific Region
Position: Mudlogging Geologist/Mudlogger and Pressure Evaluation Engineer
- Offshore Pusan, South Korea for Korean Petroleum and Development Corporation (PEDCO)
- Offshore Sarawak & Sabah, Malaysia for Sarawak Shell Bhd. & Sabah Shell Private Ltd.
- Offshore Terengganu, Malaysia for Esso Production Malaysia Inc.
- Offshore Brunei for Elf Aquitaine
- Onshore Southern Highlands, Papua New Guinea for Chevron Niugini Ltd.

Year 1990–2000: Esso Production Malaysia Inc.
(Currently known as Exxon-Mobil Production Malaysia Inc. )
Location: Kuala Lumpur, Malaysia

Position: 1) Operations & Well-Site Geologist

- Worked as a Wellsite Geologist on a rotational basis. Understand and very familiar with wellsite duties such as supervising the mudlogging and wireline contractors and picking-up coring point on the rig and also designing the coring procedures/job in the office
- The job also involves monitoring the drilling/rig ativities from the office for a report to management and Petronas (Malaysia National Oil company, and compiling the final well reports for submission to Petronas and for in-house database and management review.

Position: 2) Development & Production Geologist

- Worked as a Production/Development Geologist in the Reservoir Mapping group to do well planning and actively drilling the Seligi oilfield and Jerneh gas field from 1991 to 1993. Acquired and applied the geological skills in the reservoir mapping (hand-mapping, 2D mapping and 3D geological modeling), sequence stratigraphy for siliclastic environment/deposition, log interpretation and reservoir engineering.
- Field and Reservoir Geologist for Seligi-B and Seligi-G platforms and drilled 80 development wells with 5 horizontal wells

Position: 3) Reserves Geologist

- Worked as a Reserves Geologist for two consecutive years in 1993-1994. Responsibility includes coordinating the yearly reserves reporting for all Exxon's oil and gas fields in Malaysia to head office in Houston and also hydrocarbon resources reporting to Petronas, Malaysia National Oil company. The job required inter-departmental coordination to meet a very tight submission deadline.

Position: 4) Log Analyst/Petrophysicist

- Worked as a Petrophysicist/log analyst for a year and responsibility includes doing the log interpretation for an exploration and development wells using the Exxon in-house log analysis software system on Sun workstation.
- Attended and presented a technical paper entitled "Development and use of a primary drainage capillary pressure model to determine the initial water saturation in the Malay Basin" in the Exxon Formation Evaluation seminar in Houston, Texas, USA in 1995.

Position: 5) Lead Geologist for field development plan

- Worked as a lead geologist for PM-5 & 8 blocks of Peninsular Malaysia consisting of 22 oil and gas fields. The job involves preparing the Field Development Plan (FDP) and Commercial Quantity Declaration (CQD) for the commercial fields to be developed and also identifies uneconomical fields to be relinquished back to Petronas (Malaysia National Oil company).
- Worked very closely with reservoir and facilities engineers to come out with the optimal and economical plan to develop the good and marginal oil fields.
- Also prospecting for oil and gas prospects surrounding the already discovered fields (near field wildcatting) to tie to the existing field for a better field economic whenever opportunity arises.
- The job requires integration of knowledge in detailed reservoir facies interpretation, seismic, sequence stratigraphy, petrophysics, reservoir modeling, field reserves assessment and economic and development concept. Assessed the field reserves using the Exxon proprietary software called Prosper for both probabilistic and deterministic assessment methods.

Position: 6) Planning & Budget and Recruitment Coordinator

- Worked as a Planning and Budget (P&B) and Recruitment Coordinator for the Exploration Department in 1999. The job involved planning the exploration and development budget for the department and to recruit the candidates from the high schools and universities for the Exxon's scholarship program for a first degree education in the USA and also for permanent employment in Exxon, respectively.

Year 2000–2003: Murphy Oil Corporation (Murphy Sarawak Oil Company Ltd.)
Location: Kuala Lumpur, Malaysia

Position: 1) Senior Staff Geologist

- Joined Murphy Oil at the time when the company just started its operations in
Malaysia so the responsibilities include both doing the technical work and managing the outsourced projects done by the contractors.
The technical work covers the areas like stratigraphic correlation, generating play and prospects inventory, preparing well proposals for the exploration drilling, estimated the prospects and fields reserves assessment and going for the new acreage data review. Also responsible for supervising a 3D geological modeling project using ROXAR reservoir modeling system (RMS) software.

- Also involved in the well operations and worked as Operations Geologist and Field
Geologist during Murphy's first phase exploration drilling program which leads to the first discovery of a few channel sands in the shallow water blocks of Sarawak basin in offshore East Malaysia by West Patricia-2,3 and 4 wells.
Developed the first FDP (field development plan) for West Patricia field and delivered the first oil within a year from the date the field was discovered.

- Worked on an integration project involved core and facies interpretation, characterization of hydrocarbon reservoirs using FMI logs and core and log-core calibration of several fields in Sarawak Basin, East Malaysia.

- Completed and presented a technical paper entitled "The Integration of Reservoir
Characterization and Seismic Study of the West Patricia field, Balingian Province,
Offshore Sarawak, East Malaysia" which is basically an integrated study of the core facies interpretation, hydrocarbon characterization using FMI logs calibrated to core and seismic study such as Spectral Decomposition Frequency and Phase
Analysis.

- The projects outsourced to the contractors which required supervision included the geochemistry projects (source rock evaluation, reservoir fluid study such as GC
fingerprints from sidewall core and dead crude), routine core analysis, SEM,
XRD, regional petrophysical study and FMI image interpretation.

Position: 2) Development Team Leader

- Leading a team of reservoir geologist, geophysicist and reservoir engineer, and the responsibilities included coordinating the reprocessing of an existing 2D seismic data and designing the 3D seismic acquisition, initiated the reservoir characterization studies (geological, geophysical and geochemical studies such as sequence stratigraphic study, geochemistry and basin modeling) for better understanding of the petroleum system of the basin. Using the results of the studies for building prospect inventory for exploration and appraisal drilling programs.

Year 2003–2009, present: Saudi Arabian Oil Company – SAUDI ARAMCO
Location: Dhahran, Saudi Arabia
Position: 1) Geological Specialist /Principal Development Geologist in Reservoir Characterization Department

- My main responsibility is to ensure that the production of the field that I am currently handling is capable of sustaining oil production of 500,000 barrels per day for the next 20-25 years. To achieve this objective, I am in charged of the geological operations of seven to eight drilling rigs to continue drilling the new wells and maintain potential wells and also to conduct reservoir studies to better understand the field performance geologically.

- Worked as a field/reservoir development geologist for a giant Jurassic carbonate oil field performing well location assessment, wellbore trajectory planning for highly deviated and horizontal wells, developing subsurface well prognosis estimates, determining well requirements, and data acquisition including logs, cores, well tests and other subsurface information. Planned and geosteered about 100 horizontal wells (increment and maintain potential wells) within about five years working for
Aramco, one of the wells was successfully geosteered and completed as the longest horizontal well in Saudi Arabia.

- Being awarded as the best Exploration Organization team of the year in 2004 for the contribution in that particular year to achieve the increment target production of
500,000 barrels of oil per day. The objective of the project was achieved with limited man power to geosteer the wells 24 hours a day and without 3D seismic to delineate the structural uncertainty and no pilot hole allowed to determine the tar-oil boundary prior to drilling the horizontal section.

- Applied the state-of art geosteering technology to land the well at the target entry at the top of the reservoir and also geosteering in the horizontal section inside the reservoir to optimize the well exposure in the good porosity hence maximizing the net-to-gross ratio and oil producton. Using the real-time LWD logs with the full-
suite logs GammaRay / Resistivity /Neutron and Density logs for geosteering the well in the best porosity and azimuthal density images for estimating the bed dip in real time and taking the decision to geosteer the well in the right direction updip or downdip to achieve the completion objectives.

- In several wells, the geochemistry/pyrolysis while drilling technology also implemented to estimate the API gravity and water saturation of the oil section drilled and to determine the present of tar versus heavy oil. This technology usually applied in the water injector wells where the tar mat is present and acts as a barrier to the injection water to reach the updip producer. The wells were geosteered away from this tar mat and to stay above this tar level at all times.

- Worked on the core description and pyrolysis data, NMR log and Mudlogging data to characterize and map the multiple tar layers in the carbonate reservoirs.

- Work on daily basis with LINUX workstations and very familiar with the industry mapping and cross-section software packages such as Landmark OpenWorks and
Strat Works and Z-Map Plus, and other software like Geolog and WellCad.

- Provided support to the Geological Modeling Group by updating the 2D Geological
Grids and incorporating the 3D seismic and fault interpretation using the
Z-MapPlus software for inputting into the 3D geological model and reservoir simulation.

- Involved in training junior geologists on well planning, geosteering wells and
Landmark software familiarization.

Education: Jan.1981–Dec.1984 - University of Missouri-Rolla, Rolla, Missouri, USA.
- B.Sc, Geology and Geophysics
- Aug 1980-- Dec. 1980 Southern Illinois University, Carbondale, Illinois, USA. Center of English As A Second Language

Interests: Reading, traveling, watching movies.
Nationality: Malaysian
Date of Birth: July 26th, 1962
Marital Status: Married with four children

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 10902)

Go to Search Parameters...

Brief Description

Petroleum Engineer with 26 years of professional experience mostly in Production Engineering. Spanish and English fluent speaker. Artificial lift, workover and well service recommendations. Well Completion programs. Well testing. Field Evaluation and Production Optimization.

30 + year mud engineer, experienced in all phases of drilling fluids & BOP.

I am a first Class Chemical Engineering Graduate, having about 21 years experience in Oil & Gas, Petrochemical and Fertilizers industries in the areas of Process Design, Process Operation, Technical Services, Projects and Plant Commissioning is now looking for a location change.

I have more than 17 years experience in exploration and development domains. During my career, I have explored for hydrocarbon in the Algeria sedimentary basins. North Sea Norwegian sector, Libya and now I`m working in Canada for Fugro-jason.

Having more than 25 years of experience in the field of operations of utilities,main process in oil and gas,petrochemical,fertiliser plants.Can lead a team of commissioning engineers in start up and commissioning activities.

Document Control and Records Management, Contracts Management, Supervisory and organisational skills, independent worker. Computer literate. Experienced at startup of new sites.

Twenty years of progressive Operations and Supply Chain Management Experience in manufacturing, distribution and service industries. Experience is inclusive of development and implementation of Lean Thinking concepts within the Procurement and Inventory Control areas for zero based inventory replen

23 YEARS EXPERIENCE IN PETROCHEMICALS -PROJECT , OPERATIONS ,ERECTION ,COMMISSIONING

Senior Executive with over 30 years experience in the Oil & Gas industry.

Seasoned and versatile process engineer (Oil & Gas, Refining) seeking a Process Engineering position that utilizes my analytical and communication skills to enhance organizational growth and profitability.

Project management, Coordination with clients/vendors/consultants/contractors, site supervision, prepare tender documents/ costing/ estimating/ review of procedures, ensure safety and quality at site, material procurement, progress monitoring, heavy equipment transportation& erection

Professional API 510 and AWS CWI Inspector

With thirty years experience in the workforce in industries such as oil & gas, mining, fabrication/construction, and marine engineering, I have a very strong mechanical aptitude in all disciplines and a strong commitment for OHSE having started with my apprenticeship as a Mechanical fitter/1st class

My strong background is in the reservoir characterization in both clastic and carbonate geology, well planning and execution, tar characterization, operations geology, and geosteering. Expert in Landmark geological softwares OpenWorks, Stratworks and reservoir mapping using Z-Map Plus.

Petrophysicist

Over 15 years of experience in Instrumentation Engineering, Procurement, Construction, pre-Commissioning and commissioning of projects

Document Controller with 10 years experience in Oil & Gas industry

Highly skilled and experienced Sr. Drilling Engineer, experience with land/offshore (including deepwater), having worked as Drlg Engineer through Drilling Engineering Supervisor for a large scale GoM deepwater developement project.

Total of 20 years offshore , for just over the past 4 years I have been working as night drilling supervisor in the UK North Sea. I started my career in mud logging and moved on to being a wellsite geologist,

I hold Master degree in palynology and currently Phd student doing research on ordovician silurian palynology

20 years experience in drilling/work

Engineering design, offshore and onshore pipelines and facilities, Report writing DBM, FEED, PEP

I graduated from university studies, firstly Drilling and Production then MASTER (Horizontal Drilling Wells). For 2 years I worked as Engineer in Cementing Department for SC Petros SA (Romania), then for 18 years I worked as Engineer and Data Analyst in Drill Stem Testing Department.

Production chemist involved in oil & gas flow assurance, development and validation analytical operating procedures, reliability plant engineering

I am a diligent person and very articulate in presentation. I have a huge experience in Business Development with PETRONAS and its PSC Contractors like Exxon Mobile, Shell, Talisman and Murphy during my stint in promoting VDP status products and services. Cheers

Working in oil and gas project for more that 15 years as a QC- Piping Inspector.

B.E.(Mechanical); 22 Years total Industry Experience; Served with SABIC, Reliance, SPIC & Shell;

Supplier management, vendor development, startegic sourcing, procurement support, procurement management

More than twenty (20) years experience in the field of Engineering Construction in

A professional, well-qualified MECHANICAL ENGINEER with extensive project management experience in the oil refining, gas, LNG/LPG, petrochemical and associated industries.

Senior Plant Inspection Engineer. Mechanical engineering graduate with 29 years of experience in Oil/ Petrochemical industries loking after Process Plant Inspection, Materials Inspection, NDT, Corrosion, Failure Analysis, Fabrication/ Welding inspection in running plants + new grass root projects.

Geologist, Heavy Oil and Oilsands. Experienced consultant, prospect generator, horizontal well planner for thermal and CHOPS applications.

dcs operator or panel operator

I have 22 Years of experience in the Detailed Design and Engineering in the areas of Plant Design & Piping for Oil & Gas, Petrochemical, Chemical and Power Projects. I am presently working as a Head Piping.

Accomplished senior manager with over 23 years experience in Financial Accounting, business development, Auditing and system designs. Special skills in Enterprise Resource Planning ( ERP) system implementation and SAP support and Training,

Extensive experience in multidisciplinary projects for the Canadian, Mexican and Venezuelan Petroleum Industry.

With 20years O&G experience, my main experience has been on major projects during design. I have experience within Operations, Construction and Commissioning and also worked on site; offshore, pipeline construction and FPSO shipyard construction. I have Australian and British Citizenship.

35+ years as Drilling Engineer, Drilling Supervisor, and Drilling Superintendent

Diploma in Polymer Tech.:Plastic And Rubber Institute London (UK), B.Sc. (Chemistry. & Physics.) Mumbai University.

Dedicated professional in Exploration and Production with 27 years experience working for the two largest major Oil Services Companies. Strong engineering background in Drilling and Completion Fluids as well as Drilling Waste Management through years of focused operational management.. Strong engi

Drafter & Designer experience in estimation and designing of transmission lines and poles. Facilitated department meetings for administration of projects. Have worked the industry for twenty-five years and have obtained a Bachelors of Science degree in, Business Administration. Ability to prioritize

Profile: A Specialist Seismic Interpreter with over 15 years experience in Oil & Gas exploration, in seismic interpretation and prospect generation. Having the ability to supervise seismic processing and acquisition activities and take on role as a Project Manager. Confident in ability to cont

Project Manager and Senior Staff Landman and Senior Right of Way Agent

Technical English instructor in oil and gas industry, rotational and residential; ESP, ESL and General English in a variety of countries; administrative/management experience as well as technical writing/translation and course writing; BA, MA and TESL cerified

Purchasing/Contract Administration career includes experience in oil & gas, subsea, petrochemicals and drilling. It also includes large and small projects and many years in chemical/refinery enviroment. My Motto: Whatever it takes to get the job done.

Working with Transocean as a Drilling Manager in Integrated services Project started for 5 Jack up rig for Bombay High field with client -ONGC. Operation commence in Jan 2007.

Drilling Engineer offshore tender rigs jackups onshore land rigs

process engineer

a senior instrument & Controls engineer

Sr Piping Designer Oil & Gas 3D model

First 1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out