Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #87896
next resume »»
CONTACT INFORMATION:
View contact information...
Diploma in Petro Chemical engineering from Institute of Nandha polytechnic college erode. Year of passing - 2006 with first class. I hereby apply for the above-mentioned post in your esteemed organizations. Having a sound knowledge in Chemical Process Industries (OIL&GAS) & SULPHUR RECOVERY UNIT (SRU). In Plant Operations and product quality management and safety.
OBJECTIVE:
Quest to work in real professional environment that enables to cope-up with the emerging latest technology and scope to improve the knowledge.
EXPERIENCE:
Over +3 years of Operation experience in OIL & GAS industry with includes Pre-commissioning, commissioning operation.
TECHNICAL QUALIFICATION:
Diploma in Petrochemical Engineering (Nandha polytechnic college, Erode-52)
SUMMARY:
Serving with Essar oil limited in Sulfur Block Operation
* Sulfur Recovery Unit
* Amine wash and Regeneration Unit
* Sour water Treatment unit
* Pelletizer unit
ESSAR OIL LIMITED
Essar Oil's Refinery is in the process of setting up a refinery with a capacity of 15 million tones per annum (MMTPA). The refinery is being built with the latest, state of the art technology. The refinery will have the capability to process the most sour, acidic and heavy crude.
OPERATION EXPOSURE:
Unit: SULPHUR RECOVERY UNIT (SRU).
Capacity: 220x2 (2 Train) MT/SD
Technology: Jacobs
Engg: Engg India Limited, India
Unit: Sour gas and water treatment unit Amine Recovery unit
Tech & Eng: ABB
Unit: Sulfur Pellatisation Unit
Capacity: 220x2 (2 Train) MT/SD
Technology: Sandwik Engineering
JOB PROFILE
Presently working as a Field Operator in SRU/SWS/ARU/PELLETIZER Plant, I have sound knowledge in plant operation and have Pre-commissioning & commissioning experience in
SRU/SWS/ARU/PELLETIZER Plant.
During the Pre-Commissioning Period I involved
„Ï DCS operation at the time of Commissioning
„Ï Claus Reactors and burner dry out
„Ï Alkaline boil out for Waste heat boiler and condensers
„Ï Degreasing in Amine units.
„Ï System Flushing, leak checking and pressure test.
„Ï Prepare punch point and timely liquidation for all systems
„Ï Vessel inspection and rotary equipments inspection.
„Ï Coordination to other department and venders.
„Ï Cold circulations and steam blowing
Commissioning the SWS/ARU/SRU/ PELLATISATION UNIT
P Commissioning plant system vise
P Stabilization the unit and trouble shooting
P Monitoring the plant performance and the same record.
P Continuous vigilant in the field by taking rounds at regular intervals
P Maintaining desired operating conditions so as to optimum yield of production & Co-ordination & Co-operation with allied units.
P Monitoring the smooth and safe operation of rotating equipment Like Pumps, Blowers etc.
P Ensuring all standby pumps are always in healthy and warm up condition.
P Ensuring strict compliance with safety procedures & work permit systems.
P Following proper housekeeping to ensure clean and safe work area.
TRAINING
P Attended First aid program & safety training class conducted by St.Johns Ambulance Associations and ESSAR OIL.
P 15 days Jacobs (SRU-Licensors) vendor training undergone in Oil Club Essar Oil Limited.
Job responsibilities
P Continuous vigilant in the field by taking rounds at regular intervals
P Maintaining desired operating conditions so as to optimum yield of production & Co-ordination & Co-operation with allied units.
P Monitoring the smooth and safe operation of rotating equipments Like Pumps, Air Blowers, etc¡K
P Maintain the record for the future /past shut down job.
P Ensuring all standby pumps are always in healthy and warm up condition.
P Ensuring strict compliance with safety procedures & work permit systems.
P Following proper housekeeping to ensure clean and safe work area.
PERSONAL DETAILS
Date of birth: 13:07:1985
Nationality: Indian
Marital status: Married
Languages Known: English, Hindi & Tamil
Current CTC: 3, 50, 000
EXPECTED CTC: NEGOTIABLE
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 9101 to 9150 of 10816)
Go to Search Parameters...
Brief Description
LOOKING FOR JOB IN ANY POSITION
B.E.(Electronics & Telecommunication) with good academic records. working as service engineer in R.K. engineering services private limited.
Over twenty years of experience
Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder
QA/QC Engineer & Inspector for (Welding, NDT, Piping, Structure, Mechanical, Painting, Coating, Storage Tank, Electrical & Instrument) , Construction Supervisor and Field Engineer
Safety, Health, Quality, Environmental, Waste management, training, investigations, incidents, orientations,contractors, oil and gas, chemicals, construction, hazop, hazards, emergency response, job observations, near misses, safety alerts, hazard communications
Procurement & Supply Chain Management
Area lead designer, PDS ,Microstation, AutoCad, Smartplant review, Peligan Forge Support moduler.
INSPECTION and SUPERVISION (Welding / Piping / NDT / QA/QC / Mechanical / Materials / Coating and Painting).CSWIP 3.2,ASNT Level 3,NACE Coating Inspector,ISO Auditor
Quality Management, ISO 9001, ISO 14001, OHSAS 18001, Lead Auditor of IRCA, TUV-CERT
Had been involved in diversified organization for more than 7 years as Document Control, Management Information and Records Custodian. Knowledgeable in administering exchange of documents used of Document Control System, proper retrieval of documents in line with the ISO Standard and Procedures.
Seeking Chemist, Laboratory, or Quality Control Position
Worked in an oil and gas industry and undergone an intensive training .
MS-GIS, International MBA, Fluent english and spanish, basic Arabic
Perform repairs on Ford automobiles electical systems, drivetrain, driveability. Extensive training through Ford Motor Company.
Qualified HSE ADVISOR offshore, Drilling,production, pipelaying, french,48, immediately available
Project Management, Primavera P3E Scheduler
Instrument and Electrical Superintendent with over 30 years of experience in the construction field
I have 13 years of experience in,mining and oceanography,i have worked in an institition where i held leading posts and have been able to achieve all the set cooperative startegies in the shortest time as possible
1Diploma in petrochemical engineering ,Kerala
Instrument Engineering, Fire & Gas Engineering
Manager / Engineer ( HW/SW/QA/Training )
Bachelor of Engineering (Mechanical) from Adiparasakthi Engineering college, Melmaruvathur, Madras university. (April 2002)
Over +3 years of Operation experience in OIL & GAS industry with includes Pre-commissioning, commissioning operation.
A high motivated, quick-learner, and adaptable person with good technical skills and good communication skills in English. Proof to work underpressure with multidisciplinary teams and multi cultural. A 3 years of experience in development geology at oil and gas industry.
Material controller / store incharge / ware house incharge
Experience with Electrical and Instrumentation & Control Systems design which encompasses project estimating, equipment purchasing, design, build, programming, installation, start-up (commissioning) and field service/troubleshooting for the following: AC motor controls, MCC’s, VFD’s, MOV’s, AOV’s,
Twenty-six years experience in most aspects of oil and natural gas production, processing, and transportation.
Looking for suitable operation. vacancy
Specialized in electrical commissioning engineering substation and protection, protective relay co-ordination power system study, Electrical engineering Diploma
Marine + International Projects Oil & Gas
High Skills in Plant Management, Maintenance, Engineering, Training &Technical Support.
The professional profile of a physicist is one of the most varied and extensive. Physicists learn during their studies, strategies for solving problems and issues as quickly and efficiently. Following this training the physicists can work in a universal (almost) any professional area.
Project Engineer/ Program Manager/ Controls Engineer
MS office, operating system: Windows XP,2000,98, some college
Process Design and Simulation Engineer
Processing and Borehole Geology Interpretation (OBDT, HALS, FMI, UBI and OBMI). Preparation of Interactive CD-ROM of final reports for customer. Graphic Design. Graphic Visualization
I'm a young Petroleum Engineer with capacity of leadership, creativity, good interpersonal relationships, constant bring up to date and easiness for the learning of specialized software, also ending up contributing new ideas mainly for the oil industry in the development of projects.
Experience Summary 4 Years Experience in various projects involving Fiber optic networks for APSWAN (Andhra Pradesh State Wide Area Network), JTM (Jasmine Telia Mobiles), TATA Teleservises HTIL(Hughes Telecom) Project and Reliance Infocom Project.
PE in Mining, Environmental & Civil Engineering with 26+ years experience in surface coal mining management, engineering & environmental. I've held positions up to and including Vice-President of Operations. Well experienced in open pit dragline & truck/shovel operations. Well organized.
API 510 / CSA Level 1 Welding Inspector. Construction Coordinator
Project Management, Oil & Gas Industry, Civil Costing, Planing and Estimation
I worked as a supervisor and foreman on suspension bridge projects in asia and europe and posses,rigging,banking,slinging skills. I also have experience as a ultrasonic operator and posses a ASNT level 2 US cert. I have current OLF,BOSIET,HUET and medical certs and am available to work immediately
I am a self-motivated individual that has a desire to play a Key role in the acquisition of Oil, Gas and Minerals. What I do lack in experience I will make up with enthusiasm and willingness to learn. I will strive to get the job done right the first time on time.
Oil field experience as field engineer, total of 10 plus years, 7 years in Middle East, worked in Kuwait, Oman, Egypt & UAE, Electronics Engineer, good exposure to IT, with driving license of GCC countries.
Piping/Mechanical Draughtsman (sewerage plant/Oil & gas)
Radiography Interpreter, QC, Lead QC, Welding Inspector, Client Inspector and 3rd Party
Project Engineer
Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan
Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,
First
Prev
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
[ 183 ]
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
Next
Last
Seach Parameters
Change search parameters...
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com