Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #88022 next resume »» CONTACT INFORMATION: View contact information... EDUCATION 1988 – 1991 SOUTHERN ALBERTA INSTITUTE OF TECHNOLOGY Calgary, Alberta, Canada Petroleum Engineering Technology, Production Major EMPLOYMENT EXPERIENCE Oct 07 – Present Underbalanced Drilling Advisor / Company Man TOTAL E&P Yemen, Republic of Yemen * Completed UBD Basement development campaign; 19 oil wells, 20 laterals, 19878 metres 40 operational months * Report directly to the Drilling Engineering & Completions Manager * Ensured UBD operations are conducted safely and in compliance with TOTAL Company Rules where applicable * Assist with development of TOTAL Company Rules relative to UBD operations * Review / update UBD procedures and practices as required * Report non-conformance, potential, or near-miss incidents; while tracking all accounts * Perform Engineering tasks to optimize UBD activities for; reduction of costs, performance improvement and maximize efficiency (Daily program, analysis of the flow, optimization of injection parameters and procedures) * Advise on improvement of Drilling contractor and UBD interface * Prepare the UBD program and the End of Well Report for the UBD operations * Work in Close relation with the Company Man to assist in achieving UBD objectives for each well * Coach Company Man on proper UBD techniques and principles * Facilitate post well meeting at the TOTAL E&P Base in Sana'a * Coordinate on-site meetings between service providers and TOTAL regarding UBD operations / issues * Follow-up action points relative to learning's and recommendations * Conduct commissioning of the UBD system prior to start-up * Coordinate UBD pre-spud meeting with on-site drilling and production teams * Champion lesson's learned and implementation of same * Validate the data sent to the Reservoir Engineering department in Sana'a * Liaison with Company Man, Production Superintendent and Logistics for planning operations and for potential conflicts in operations (e.g. permit to work and logistics) * Assist Company Man w/ preparation and peer review of written work instructions * Ensure all personnel are informed of on-going operations and or any changes (1 to 1 comms if required) * Constant liaison with Service Providers to pre-empt potential problems with equipment and or plan service required off critical path * Custodian of the P&ID Management of Change document * Stand-in Company Man as required Oct 06 – Sept 07 Coil Tubing Underbalanced Drilling, Project Manager Margham Dubai Establishment, Dubai Emirate, UAE * Complete CTUBD redevelopment; 18 gas wells re-entered, 92000 ft drilled, 48 laterals, 11 operational months * Report directly to the General Manager * Manage and promote safety program, safety promotion and compliance * Manage daily CTUBD operations for 18 gas well redevelopment campaign * Conduct engineer, CTUBD well design * Plan and conduct logging operations prior to CTUBD re-entry * Plan and conduct well intervention prior to CTUBD re-entry * Prepare well specific CTUBD program * Conduct P10, P50 & P90 AFE costing analysis for UBD * Manage daily, per well and project cost control * Manage daily operations and logistics * Complete end of campaign documentation Sept 05 – Sept 06 Underbalanced Drilling, Project Manager TOTAL E&P Yemen, Republic of Yemen * Write UBD operational and contingency procedures * Facilitate tender evaluation process * Conduct HAZOP & HAZID on UBD, design criteria, equipment and operations in preparation for execution of UBD ops * Prepare and present UBD training program to on-site decision makers. * Prepare UBD Program * Manage and implement interface between Rig and UBD equipment and personnel * Manage project start-up (mobilization of UBD equipment) * Prepare commissioning and familiarization documentation August 03 – July 05 Senior Underbalanced Drilling, Project Engineer Margham Dubai Establishment, Dubai Emirate, UAE * Completed 2 well, new drill UBD project from conceptual design to execution including on site Engineering and Supervision * Conduct technical UBD feasibility study for re-entry and new drill prospects in the Margham field * Conduct P10, P50 & P90 costing analysis for UBD * Engineer, UBD well design * Prepare "Scope of Work" documentation for UBD Tender * Write UBD procedures relative to scope of work and well design * Prepare UBD equipment specification documentation * Facilitate tender process * Conduct HAZOP & HAZID on UBD, design criteria, equipment and operations in preparation for execution of UBD ops * Manage project start-up (mobilization of UBD equipment) * Prepare commissioning and familiarization documentation April 00 – April 03 Senior Underbalanced Drilling Engineer/Supervisor Shell Expro, Southern Sector North Sea, UK * Contract to Shell Expro for UBD Supervision, offshore, aboard the Sante Fe – Britannia, Monarch and Endurer * Accountable for safety and performance during UBD operations * Provide technical and mechanical engineering support to all aspects of underbalanced drilling operations: HS&E management, UBD surface and subsurface operations, UBD tripping and snubbing, UBD well control * Manage operational procedure changes, lateral learnings and daily written work instructions * Champion lesson's learned and implementation of same * Orientate and train new crew member * Liaison daily drilling operations w/ Shell Expro base in Lowestoft * Underbalanced drilling supervisor, 3 well project for Occidental of Oman * GIT advisor for PDO, UBD projects in Oman 1998-April 00 Senior Underbalanced Drilling Engineer/Supervisor Tesco Drilling Technology, Calgary, Alberta * Engineering team leader for YPF/Repsol underbalanced drilling project in Western Argentina. Design and execution. * Project Manager for UBD operations at Pluspetrol's, Ramos 1003 location in Northern Argentina. Design and execution. * Engineering Team Leader for Latin America, orientate and train rig crews in underbalanced drilling procedures. * Optimizing underbalanced drilling operations through reservoir modeling with Neotec multiphase flow software * Planning of horizontal, vertical and reentry wells in a variety of lithologies * Writing feasibility studies and underbalanced drilling programs * On-site technical supervision of underbalanced wells * Interpretation of well site data * Composing post well analysis * Evaluation of equipment bids for customer * Researching technical data for paper submissions * Formulation of programs for casing and drill string design, equivalent flow rates, air drilling volumetric requirements and snubbing operations * Assist in development of software pertinent to underbalanced drilling 1995-1998 Senior Production Supervisor Novus West Petroleum Pty Ltd., Perth, WA * Supervise personnel for operation/maintenance of all gas lift and production operations (Airlie Island Offshore Oil Project) 1993-1995 Production Supervisor Apache Oil and Gas, Perth, WA * Supervised personnel for operation/maintenance of monopod offshore production facilities (Harriet Oil and Gas Field) PROFESSIONAL DEVELOPMENT 2007 Certificate – IWCF #S43856 / AD 341 / 0459 IPC, Abu Dhabi, U.A.E. 2007 Certificate – HUET Abu Dhabi, U.A.E. 2002 Certificate – GSF, Safety Focus I Norwich, Britain UK 2002 Certificate – Advanced Safety Leadership Norwich, Britain UK 2002 Certificate – PDO HSE & H2S Introduction Muscat, Oman 2001 Certificate – H2S Rescue Petroleum Industry Training Calgary, AB Canada 2000 Certificate – Basic Offshore Safety Petans Limited, The Training Centre Norwich, East Anglia UK 2000 Certificate – Skiff Project, Underbalanced Drilling Familiarization Course * The case for Underbalanced Drilling * HSE Management Issues * Underbalanced Drilling Operations * Underbalanced Tripping and Snubbing * Underbalanced Well Control Shell Base, Lowestoft East Anglia, UK 1999 Certificate – High Speed and Defensive Driving Alberta Motor Association Calgary, AB Canada 1998 Certificate - Modern Safety Management DNV (Det Norske Veritas) Perth, WA 1996 Certificate – Breathing Apparatus and Firefighting Course RCS Emergency Safety Training Pty Ltd. Fremantle, WA 1996 License – Restricted Radio Operator License Department of Transport/Maritime Division Perth, WA 1996 Certificate – Equipment operations/National Plan to combat pollution of the sea by oil Department of Transport/Maritime Division Fremantle, WA 1996 Certificate – Natural Gas engine operation and maintenance Oceanic Compression Services Vicksburg Platform, WA 1996 Certificate – Senior First Aid St. John Ambulance Perth, WA 1996 Certificate – Helicopter underwater escape training and basic sea survival Industry for Accident Prevention (IFAP) Perth, WA 1995 Certificate – Train the Trainer Technical Operation Training School (T.O.T.S.) Perth, WA 1994 Certificate – Class B Gas Fitter Canadian Gas Association Victoria, British Columbia, Canada 1995 Certificate – Sonolog, Dynamometer Course Expertest Pty Ltd. Cooper Basin, SA D.O.B. 27 March 1961 D.L.# Alberta 57829-574, Dubai 739087 Citizenship Canadian/Right to Abode in the UK/Portuguese resident Passport # Canadian BA342770 – Expires 28 November 2012 Marital Status Married – 2 Children References available upon request View contact information... «« previous resume next resume »» Search Results (Resumes 501 to 550 of 10924) Go to Search Parameters... Brief Description SENIOR E & I ENGINEER (EPC Project Management - Construction & Commissioning / QS / Contracts Administration / Procurements / Recruitment ¡V field of Electrical & Instrumentation, partly Mechanical & Civil) Over 15 years working experience in private sectors and International Organization as Executive Secretary to expatriates, Human Resources Officer, Procurement Officer, Interpreter/Translator and Project Assistant. I have fourteen (14) years post qualification experience: with about ten (10) years experience working on International Projects (in the Oil and Gas/Energy industry), working as a Management Consultant providing high-end business value consulting services and solutions. Lokking for a Inspector Job MS degrees in Management and IT, a member of Canadian Council of Information Technology Professional (CCITP) , more than 10 years of experience working as SME-EPM,Head of IS, MIS Specialist, in-depth knowledge of Project Management, BPR, Quality Management with good problem solving and people skills I am a Maximo Implementation and Upgrading Consultant. A total of sixteen (16) years of working experience (thirteen years were in the oil/gas and petrochemical construction projects in the Gulf Region. A computer literate and proficient in oral and written English skills. Experienced in civil, building , steel structures, fire proofing and piping works Oil and Gas Operations Mnagement 20 years experience in drilling operations Experience in DCS, PLC, applied to Process Industries and Power Plants. Exp/ with logic diagrams, erection and commissioning,P&ID, MCC, specifications, studies and cost estimation. Reservoir Engineer specialized in Simulation I have 33 plus years of maritime engineering experience. Over 18 years of this is offshore/oilfield/maritime experience as Chief Engineer, Maintenance Engineer. I have an ability to work safely and efficiently, without direct supervision, I use initiative to solve difficult problems and work well as Thorough Knowledge of operation of Laboratory sophisticated instruments like XRF,GC,HPLC,UV Spectrophotometer, FTIR, MFR Tester, K.F titrator, Hunter Lab Colorimeter, Cast Film Extruder, Blown Film Extruder, Density Gradient Column, D.S.C, Capillary Rheometer etc. M.E in Instrumentation Engineering with 17 years Oil & Gas Project design, Detailed Enginerring, Construction & Commissioning . A medical doctor with long years of experienced on the rig,company ,ship,clinic and hospital seeking employment. Over 33 years of working experience within India and abroad as electrical superor, senior electrical foreman, commissioning engineer, Elelectrical specialist.and Specialist Consultant.All the 33 years Maintenance ,Commissioning and Consultant for CMMS and Mtc Optimation Projects in oil,power Indys. Posses degree in Geology. Familiar with Microsoft Work, Excel, Power Point, Project , Landmark Geosciences Workstation(Good), Petrel (Good), Well Kill Sheet Program(Good), Drill bit hydraulic software(very good), Mud logging software setup(good) and trouble shooting. Chemical engineer with twenty four years of total experience in the Oil & Gas, Oil Processing and Petrochemical industries. I have rich experience in project engineering, design supervision, multi-discipline engineering co-ordination, contract management, commissioning supervision and construction Mud engineer with 24 years of experience, on land and off shore, made all types of mud, OBM, SBM and WBM Twenty-Seven years work experience primarily in Mechanical, Process Piping Design, Civil/GIS, CADD (Computer Aided Design Drafting) and CADD Management. Broad based as well as extensive expertise in Engineering Applications and Software Systems. I am graduated from Algerian Petroleum Institute as an Enginer in petroleum geology (5 years graduation). I was involved in geological interpretation for prospect generation from 1995 to 2000, since then I have been focusing in geochemistry and basin modelling (1D, 2D and 3D) regional studies. PROJECT MANAGEMENT Quality, Health, Safety and Environment Manager - Offshore and Onshore Free! Background and extensive experience in HES regulatory requirements through all stages of execution in major capital projects including Concept Design, FEED, Detailed Design, Construction / Fabrication and Hookup and Commissioning. Have 28 years of experience in the oil and gas industry which also i Supply Chain and Procurement Management Well Test Engineer Experienced Professional Mechanical Engineer with 17 years diverse professional experience in Oil & Gas Industry - Project/Design/Operations Engineering, Rotating & Static Equipment sizing and selection, Commissioning Activities, and associated technical skills. Instrument engineer supervisor material control supervisor Individual expert in Surveying - Topography - Land registration - Remote sensing – GPS – Cartography - GIS agreed by the European Commission Visual Foxpro RDBMS Programmer LAN Environment / Technician / CAD 3D Designer I am a Civil Engineer, Internal Auditor & shortly being certified as Lead Auditor by IRCA. Results-driven manager in diverse supply chain, purchasing and sourcing areas. Well Integrity Specialist, Completion Production Engineer I offer many years of experience in the Petroleum Reservoir Engineering field. I have expertise in reservoir engineering management and consulting, reservoir integrated studies, well testing/pressure transient analysis and decline curve analysis Oil Industry exp: 28 YRS, CITGO/Consulting Downstream/Upstream/Latin America/Pricing. Objective: Pricing Manager, Business Development Manager, Head Economics Dept., Refining(Tech/Fin), E&P(Fin)Invest. Bank. 1st class Mechanical Engineer from reputed Institution, preferably specialization in Thermal Power Plant, having PG Diploma in Thermal Power Plant Engineering from National Power Training Institute, Neyveli Lignite Corporation, TamilNadu. EEHA and Hazardous Area Expert - Seeking FIFO - Remote Area Work Administrative and Technical support Telecom, Electrical, Electronics and Instrumentation professional with 19 years of experience in India & Abroad, fast-paced environments demanding strong organizational, technical and interpersonal skills Engineering Graduate with 19 years of experience in Sales & Marketing, Business Development, Operations, Supply and Distribution / Logistics, P&L Management of businesses involving Lubricants / Petroleum / Coatings offering Value added Solutions in Industrial, Power, Marine Segments 15+ years of various jobs with Foxboro DCS, and Triconex IPS/FGS Systems I am a highly skilled Mechanical Engineer with over 18 years of experience in engineering (oilfield equipment, rotating equipment, wind energy) and general technology with PhD in Mechanical Engineering. I senior completion and workover engineer 19 yeas experience To further enhance career growth and inter-personal skills, To share technical knowledge with other colleagues, To take the challenge of having a wider responsibilities within a new organization. An Oil & Gas Professional with 30+ years experience in all facets of Drilling and Completion ISO 9000:2000 QMS-03 Lead Auditor IRCA Course No.17047 and Internal Quality Auditor (IRCA No. R141), Senior QA/QC Engineer, Certified Welding Inspector (CSWIP3.1), SNT-TC1A Level 2 for RT film interpretation / UT / PT and MPI, Piping, Blasting/Painting, Structural & Pressure Vessel Inspector. Expert Rigging & Lifting Supervisor, Health & Safety Advisor, looking for work in the construction industry, freelance contractor I am a Petroleum Engineering Technologist with 29 yrs E&P experience, the last 12 yrs have been with major Operating Companies in positions of; Lead UBD Engineer, UBD Project Manager, UBD Advisor and Drilling Supervisor. Available for a new project 30 Novembewr 2009. 20+ years piping field - 13+ years PDS 22 years oilfield experience. High pressure, horizontal pumpdown experience. Experience with both Open Hole and Cased Hole Logging and Perforating. 2.5 years overseas. ISO 9000, ISO 14001, OHSAS 18001, ISO/TS 16949, TQM, SAP R3, FOURTH SHIFT, SPC First   1   2   3   4   5   6   7   8   9   10   [ 11 ]   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last Seach Parameters Change search parameters... INDUSTRIES: Petroleum/Oil/Gas; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com